summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-22drm/amdgpu/smu: move fan rpm query into the asic specific codeAlex Deucher1-5/+7
On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-22drm/amd/powerplay: custom peak clock freq for navi10Kevin Wang1-0/+55
v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/powerplay: change sysfs pp_dpm_xxx format for navi10Kevin Wang1-6/+41
v2: set average clock value on level 1 when current clock equal min or max clock (fine grained dpm support). the navi10 gfxclk (sclk) support fine grained DPM, so use level 1 to show current dpm freq in sysfs pp_dpm_xxx Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-17drm/amd/powerplay: correct smu_update_table usageEvan Quan1-8/+8
The interface was used in a confusing way. In profile mode scenario, the 2nd parameter of the interface was used in a different way from other scenarios. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-16drm/amd/powerplay: enable fw ctf,apcc dfll and gfx ssKenneth Feng1-6/+5
enable fw ctf, apcc dfll and gfx ss on navi10. fw ctf: when the fw ctf is triggered, the gfx and soc power domain are shut down. fan speed is boosted to the maximum. gfx ss: hardware feature, sanity check has been done. apcc dfll: can check the scoreboard in smu fw to confirm if it's enabled. no need to do further check since the gfx hardware control the frequency once a pcc signal comes. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-16drm/amd/powerplay: avoid double check feature enabledKevin Wang1-15/+8
the unforce_dpm_levels doesn't need to check feature enablement. because the smu_get_dpm_freq_range function has check feature logic. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-12drm/amd/powerplay: add pstate mclk(uclk) support for navi10Kevin Wang1-1/+7
add pstate mclk(uclk) support. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-11drm/amd/powerplay: bug fix for sysfsKenneth Feng1-2/+2
when we set profile_peak to sysfs:power_dpm_force_performance_level, we gets the wrong socclk level and mclk level.this patch fix this issue. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-09drm/amdgpu/navi10: add uclk activity sensorAlex Deucher1-2/+14
Query the metrics table for the current uclk activity. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-08drm/amd/powerplay: Use memset to initialize metrics structsNathan Chancellor1-2/+6
clang warns: drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:601:33: warning: suggest braces around initialization of subobject [-Wmissing-braces] static SmuMetrics_t metrics = {0}; ^ {} drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:905:26: warning: suggest braces around initialization of subobject [-Wmissing-braces] SmuMetrics_t metrics = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like clang suggests; however, there has been a bit of push back from some maintainers[1][2], who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version[3], and properly initializes all subobjects. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ [3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/ Fixes: 98e1a543c7b1 ("drm/amd/powerplay: add function get current clock freq interface for navi10") Fixes: ab43c4bf1cc8 ("drm/amd/powerplay: fix fan speed show error (for hwmon pwm)") Link: https://github.com/ClangBuiltLinux/linux/issues/583 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-08drm/amd/powerplay: add temperature sensor support for navi10Kevin Wang1-0/+41
the hwmon interface need temperature sensor type support. 1. SENSOR_HOTSPOT_TEMP 2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP) 3. SENSOR_MEM_TEMP Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-05drm/amd/powerplay: add baco smu reset function for smu11Kevin Wang1-0/+8
add baco reset support for smu11. it can help gpu do asic reset when gpu recovery. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-28drm/amd/powerplay: update smu11_driver_if_navi10.htiancyin1-1/+1
update the smu11_driver_if_navi10.h since navi10 smu fw update to 42.28 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: tiancyin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-27drm/amd/powerplay: support runtime ppfeatures setting on Navi10Evan Quan1-0/+165
Implement Navi10 backend for runtime ppfeatures status retrieving and setting support. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-27drm/amd/powerplay: check prerequisite for VCN power gatingEvan Quan1-6/+10
VCN DPM is a necessary prerequisite for VCN power gating. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/powerplay: make athub pg bit configured by pg_flagsHuang Rui1-1/+3
The athub pg features enabling should be indicated by pg_flags. Reported-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/powerplay: make mmhub pg bit configured by pg_flagsHuang Rui1-1/+3
The mmhub pg features enabling should be indicated by pg_flags. Reported-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/powerplay: add feature check in unforce_dpm_levels function (v2)Kevin Wang1-6/+13
if not check dpm feature is enabled, it will cause show smc send message failed log in dmesg log. eg: echo "auto" > power_dpm_force_performance_level v2: whitespace fix (Alex) Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rui Teng <rui.teng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/powerplay: fix fan speed show error (for hwmon pwm)Kevin Wang1-2/+20
the navi asic can't get current rpm by MSG_GetCurrentRpm, it will cause show fan rpm error, use Metrics_t to replace it. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amdgpu/powerplay: FEATURE_MASK is 64 bit so use ULLAlex Deucher1-1/+1
ULL is needed for 32 bit arches. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: remove unsupport function set_thermal_fan_table for navi10Kevin Wang1-13/+0
the PPSMC_MSG_SetFanTemperatureTarget is not support on navi10 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: enable BACO feature as WARJack Xiao1-0/+1
It would hit SMU fw bug without BACO enablement when audio driver put audio device to D3 state. Before the bug in SMU fw get fixed, enable BACO feature as WAR. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: use pp_feature_mask to control uclk(mclk) dpm enabledKevin Wang1-3/+5
the uclk dpm feature is not work well on all navi10 asic, use pp feature mask module parameter to control it. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: disable fw dstate when gfxoff is enabledJack Xiao1-1/+4
SMU FW has bug that it would cause hung when both fw dstate and gfxoff are enabled at the same time. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add interface to get uclk dpm tablehersen wu1-0/+30
dc needs get uclk dpm table for bandwidth calculation Signed-off-by: hersen wu <hersenxs.wu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: wake up azalia from d3 by sending smu messagehersen wu1-0/+1
this is hw workaround to wake up azalia from d3. display asic and azalia are two different pci devices. while display asic wake from d3, current hw does not send signal to azalia. workaround: display driver ask smu send message to azalia device to let azalia wake up. Defintion of SMU message, like PPSMC_MSG_BacroAudioD3PME, is per asic. It is shared by different OS. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add thermal ctf support for navi10Kevin Wang1-0/+2
add sw-CTF support for navi10 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: fix no statements in function returning non-voidHawking Zhang1-0/+2
Add missing return (rebase fix). Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: move function get_metrics_table to vega20_pptKevin Wang1-1/+1
the SmuMetrics_t table is asic related data structure. so move vega20_ppt file to implement. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: enable uclk dpm default on navi10Kevin Wang1-6/+6
enable uclk (mclk) dpm by default on navi10 Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: enable ac/dc feature on navi10Kenneth Feng1-1/+2
enable ac/dc feature on navi10. currently we don't have the case to verify it. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: enable gfxclk ds,dcefclk ds and fw dstate on navi10Kenneth Feng1-1/+4
on navi10, by default the below four features are enabled. gfxclk deep sleep: enabled and verified fw dstate: enabled and then soc ulv is verified dcefclk deep sleep: enabled and verified. notice that on different boards, due to the minimum dcefclk deep sleep setting in VBIOS, we may not see dcefclk deep sleep kicking in. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add sclk sysfs interface support for navi10Kevin Wang1-0/+1
miss sclk support in force_clk_levels function Signed-off-by: Kevin Wang <kevin1.Wang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay/smu11: disable some pp features on navi10 A0 secure boardTao Zhou1-0/+12
disable DPM UCLK and SOC DS on A0 secure board Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay/smu11: add secure board check function (v2)Tao Zhou1-0/+17
To determine whether the board is secure or not. v2: rebase (Alex) Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay/smu11: enable ds socclk by defaultTao Zhou1-0/+1
Enable soc clk deep sleep. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: fix amdgpu_pm_info show gpu load errorKevin Wang1-0/+2
due to the smu dma/RTOS restriction, the interval of catching smu metric table should be more than 1ms. otherwise it will cause the gpu activity data corruption. Signed-off-by:Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: simplify the interface of get_gpu_powerKevin Wang1-1/+4
this callback function is only call in read_sensor in smu_v11_0.c, so move this code to {asic}_ppt.c to implement as asic related function. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: simplify the interface of get_current_activity_percentKevin Wang1-1/+4
this callback function is only call in read_sensor in smu_v11_0.c, so move this code to {asic}_ppt.c to implement as asic related function. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: fix dpm freq unit error (10KHz -> Mhz)Kevin Wang1-0/+2
the interface smu_v11_0_get_current_clk_freq should be return 10Khz not Mhz unit to adapt vega20 and navi10 asic at the same time. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21amd/powerplay: update the vcn pgKenneth Feng1-4/+10
update the vcn pg function in navi10. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function read_sensor for navi10Kevin Wang1-0/+21
add callback function read_sensor for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function set_watermarks_table function for navi10Kevin Wang1-0/+61
add callback function set_watermarks_table for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function notify_smc_display_config_change for navi10Kevin Wang1-0/+40
add callback function notify_smc_display_config_change for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function get_profiling_clk_mask for navi10Kevin Wang1-0/+42
add callback function get_profiling_clk_mask for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add funciton get[set]_power_profile_mode for navi10 (v2)Kevin Wang1-0/+173
add callback function get[set]_power_profile_mode for navi10 asic v2: fix smu_update_table for rebase (Alex) Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function get_workload_type_map for swsmuKevin Wang1-0/+23
1.add new callback function get_workload_byte for smu 2.remove old workload map function Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function get_fan_speed_percent for navi10Kevin Wang1-0/+19
add callback function get_fan_speed_percent for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function set_thermal_fan_table for navi10Kevin Wang1-0/+13
add callback function set_thermal_fan_table for navi10 asic Signed-off-by:Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/powerplay: add function is_dpm_running for navi10Kevin Wang1-1/+23
add callback function is_dpm_running for navi10 asic Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-24 09:34:41 +0000