summaryrefslogtreecommitdiffstats
path: root/kernel/module
AgeCommit message (Collapse)AuthorFilesLines
2023-01-24module: Don't wait for GOING modulesPetr Pavlu1-5/+21
During a system boot, it can happen that the kernel receives a burst of requests to insert the same module but loading it eventually fails during its init call. For instance, udev can make a request to insert a frequency module for each individual CPU when another frequency module is already loaded which causes the init function of the new module to return an error. Since commit 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading"), the kernel waits for modules in MODULE_STATE_GOING state to finish unloading before making another attempt to load the same module. This creates unnecessary work in the described scenario and delays the boot. In the worst case, it can prevent udev from loading drivers for other devices and might cause timeouts of services waiting on them and subsequently a failed boot. This patch attempts a different solution for the problem 6e6de3dee51a was trying to solve. Rather than waiting for the unloading to complete, it returns a different error code (-EBUSY) for modules in the GOING state. This should avoid the error situation that was described in 6e6de3dee51a (user space attempting to load a dependent module because the -EEXIST error code would suggest to user space that the first module had been loaded successfully), while avoiding the delay situation too. This has been tested on linux-next since December 2022 and passes all kmod selftests except test 0009 with module compression enabled but it has been confirmed that this issue has existed and has gone unnoticed since prior to this commit and can also be reproduced without module compression with a simple usleep(5000000) on tools/modprobe.c [0]. These failures are caused by hitting the kernel mod_concurrent_max and can happen either due to a self inflicted kernel module auto-loead DoS somehow or on a system with large CPU count and each CPU count incorrectly triggering many module auto-loads. Both of those issues need to be fixed in-kernel. [0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading") Co-developed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Petr Mladek <pmladek@suse.com> [mcgrof: enhance commit log with testing and kmod test result interpretation ] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-12-19Merge tag 'powerpc-6.2-1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details - Enable objtool to be built on powerpc to generate mcount locations - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI - Sanitise user registers on interrupt entry on 64-bit Book3S - Many other small features and fixes Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, and Wolfram Sang. * tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits) powerpc/code-patching: Fix oops with DEBUG_VM enabled powerpc/qspinlock: Fix 32-bit build powerpc/prom: Fix 32-bit build powerpc/rtas: mandate RTAS syscall filtering powerpc/rtas: define pr_fmt and convert printk call sites powerpc/rtas: clean up includes powerpc/rtas: clean up rtas_error_log_max initialization powerpc/pseries/eeh: use correct API for error log size powerpc/rtas: avoid scheduling in rtas_os_term() powerpc/rtas: avoid device tree lookups in rtas_os_term() powerpc/rtasd: use correct OF API for event scan rate powerpc/rtas: document rtas_call() powerpc/pseries: unregister VPA when hot unplugging a CPU powerpc/pseries: reset the RCU watchdogs after a LPM powerpc: Take in account addition CPU node when building kexec FDT powerpc: export the CPU node count powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state powerpc/dts/fsl: Fix pca954x i2c-mux node names cxl: Remove unnecessary cxl_pci_window_alignment() selftests/powerpc: Fix resource leaks ...
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-07module/decompress: Support zstd in-kernel decompressionStephen Boyd2-3/+92
Add support for zstd compressed modules to the in-kernel decompression code. This allows zstd compressed modules to be decompressed by the kernel, similar to the existing support for gzip and xz compressed modules. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Piotr Gorski <lucjan.lucjanov@gmail.com> Cc: Nick Terrell <terrelln@fb.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Piotr Gorski <lucjan.lucjanov@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-12-02module: add module_elf_check_arch for module-specific checksNicholas Piggin1-0/+10
The elf_check_arch() function is also used to test compatibility of usermode binaries. Kernel modules may have more specific requirements, for example powerpc would like to test for ABI version compatibility. Add a weak module_elf_check_arch() that defaults to true, and call it from elf_validity_check(). Signed-off-by: Jessica Yu <jeyu@kernel.org> [np: added changelog, adjust name, rebase] Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221128041539.1742489-2-npiggin@gmail.com
2022-11-11module: Fix NULL vs IS_ERR checking for module_get_next_pageMiaoqian Lin1-4/+4
The module_get_next_page() function return error pointers on error instead of NULL. Use IS_ERR() to check the return value to fix this. Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-11module: Remove unused macros module_addr_min/maxChen Zhongjin1-3/+0
Unused macros reported by [-Wunused-macros]. These macros are introduced to record the bound address of modules. Commit 80b8bf436990 ("module: Always have struct mod_tree_root") made "struct mod_tree_root" always present and its members addr_min and addr_max can be directly accessed. Macros module_addr_min and module_addr_min are not used anymore, so remove them. Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mcgrof: massaged the commit messsage as suggested by Miroslav] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-11module: remove redundant module_sysfs_initialized variableRasmus Villemoes1-1/+1
The variable module_sysfs_initialized is used for checking whether module_kset has been initialized. Checking module_kset itself works just fine for that. This is a leftover from commit 7405c1e15edf ("kset: convert /sys/module to use kset_create"). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Miroslav Benes <mbenes@suse.cz> [mcgrof: adjusted commit log as suggested by Christophe Leroy] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-10-25kallsyms: Make module_kallsyms_on_each_symbol generally availableJiri Olsa1-2/+0
Making module_kallsyms_on_each_symbol generally available, so it can be used outside CONFIG_LIVEPATCH option in following changes. Rather than adding another ifdef option let's make the function generally available (when CONFIG_KALLSYMS and CONFIG_MODULES options are defined). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20221025134148.3300700-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-10module: tracking: Keep a record of tainted unloaded modules onlyAaron Tomlin1-0/+3
This ensures that no module record/or entry is added to the unloaded_tainted_modules list if it does not carry a taint. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Fixes: 99bd9956551b ("module: Introduce module unload taint tracking") Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-10Merge tag 'modules-6.1-rc1' of ↵Linus Torvalds2-1/+69
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: - minor enhancement for sysfs compression string (David Disseldorp) - debugfs interface to view unloaded tainted modules (Aaron Tomlin) * tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module/decompress: generate sysfs string at compile time module: Add debugfs interface to view unloaded tainted modules
2022-10-07Merge tag 'driver-core-6.1-rc1' of ↵Linus Torvalds2-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core and debug printk changes for 6.1-rc1. Included in here is: - dynamic debug updates for the core and the drm subsystem. The drm changes have all been acked by the relevant maintainers - kernfs fixes for syzbot reported problems - kernfs refactors and updates for cgroup requirements - magic number cleanups and removals from the kernel tree (they were not being used and they really did not actually do anything) - other tiny cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits) docs: filesystems: sysfs: Make text and code for ->show() consistent Documentation: NBD_REQUEST_MAGIC isn't a magic number a.out: restore CMAGIC device property: Add const qualifier to device_get_match_data() parameter drm_print: add _ddebug descriptor to drm_*dbg prototypes drm_print: prefer bare printk KERN_DEBUG on generic fn drm_print: optimize drm_debug_enabled for jump-label drm-print: add drm_dbg_driver to improve namespace symmetry drm-print.h: include dyndbg header drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro drm_print: interpose drm_*dbg with forwarding macros drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers. drm_print: condense enum drm_debug_category debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs() Documentation: ENI155_MAGIC isn't a magic number Documentation: NBD_REPLY_MAGIC isn't a magic number nbd: remove define-only NBD_MAGIC, previously magic number Documentation: FW_HEADER_MAGIC isn't a magic number Documentation: EEPROM_MAGIC_VALUE isn't a magic number ...
2022-09-26cfi: Switch to -fsanitize=kcfiSami Tolvanen1-32/+3
Switch from Clang's original forward-edge control-flow integrity implementation to -fsanitize=kcfi, which is better suited for the kernel, as it doesn't require LTO, doesn't use a jump table that requires altering function references, and won't break cross-module function address equality. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com
2022-09-26cfi: Remove CONFIG_CFI_CLANG_SHADOWSami Tolvanen1-15/+0
In preparation to switching to -fsanitize=kcfi, remove support for the CFI module shadow that will no longer be needed. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-4-samitolvanen@google.com
2022-09-12Merge 6.0-rc5 into driver-core-nextGreg Kroah-Hartman1-1/+1
We need the driver core and debugfs changes in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08module/decompress: generate sysfs string at compile timeDavid Disseldorp1-1/+1
compression_show() before (with noinline): 0xffffffff810b5ff0 <+0>: mov %rdx,%rdi 0xffffffff810b5ff3 <+3>: mov $0xffffffff81b55629,%rsi 0xffffffff810b5ffa <+10>: mov $0xffffffff81b0cde2,%rdx 0xffffffff810b6001 <+17>: call 0xffffffff811b8fd0 <sysfs_emit> 0xffffffff810b6006 <+22>: cltq 0xffffffff810b6008 <+24>: ret After: 0xffffffff810b5ff0 <+0>: mov $0xffffffff81b0cde2,%rsi 0xffffffff810b5ff7 <+7>: mov %rdx,%rdi 0xffffffff810b5ffa <+10>: call 0xffffffff811b8fd0 <sysfs_emit> 0xffffffff810b5fff <+15>: cltq 0xffffffff810b6001 <+17>: ret Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-09-08module: Add debugfs interface to view unloaded tainted modulesAaron Tomlin1-0/+68
This patch provides debug/modules/unloaded_tainted file to see a record of unloaded tainted modules. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-09-07kernel/module: add __dyndbg_classes sectionJim Cromie1-0/+2
Add __dyndbg_classes section, using __dyndbg as a model. Use it: vmlinux.lds.h: KEEP the new section, which also silences orphan section warning on loadable modules. Add (__start_/__stop_)__dyndbg_classes linker symbols for the c externs (below). kernel/module/main.c: - fill new fields in find_module_sections(), using section_objs() - extend callchain prototypes to pass classes, length load_module(): pass new info to dynamic_debug_setup() dynamic_debug_setup(): new params, pass through to ddebug_add_module() dynamic_debug.c: - add externs to the linker symbols. ddebug_add_module(): - It currently builds a debug_table, and *will* find and attach classes. dynamic_debug_init(): - add class fields to the _ddebug_info cursor var: di. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07dyndbg: gather __dyndbg[] state into struct _ddebug_infoJim Cromie2-11/+11
This new struct composes the linker provided (vector,len) section, and provides a place to add other __dyndbg[] state-data later: descs - the vector of descriptors in __dyndbg section. num_descs - length of the data/section. Use it, in several different ways, as follows: In lib/dynamic_debug.c: ddebug_add_module(): Alter params-list, replacing 2 args (array,index) with a struct _ddebug_info * containing them both, with room for expansion. This helps future-proof the function prototype against the looming addition of class-map info into the dyndbg-state, by providing a place to add more member fields later. NB: later add static struct _ddebug_info builtins_state declaration, not needed yet. ddebug_add_module() is called in 2 contexts: In dynamic_debug_init(), declare, init a struct _ddebug_info di auto-var to use as a cursor. Then iterate over the prdbg blocks of the builtin modules, and update the di cursor before calling _add_module for each. Its called from kernel/module/main.c:load_info() for each loaded module: In internal.h, alter struct load_info, replacing the dyndbg array,len fields with an embedded _ddebug_info containing them both; and populate its members in find_module_sections(). The 2 calling contexts differ in that _init deals with contiguous subranges of __dyndbgs[] section, packed together, while loadable modules are added one at a time. So rename ddebug_add_module() into outer/__inner fns, call __inner from _init, and provide the offset into the builtin __dyndbgs[] where the module's prdbgs reside. The cursor provides start, len of the subrange for each. The offset will be used later to pack the results of builtin __dyndbg_sites[] de-duplication, and is 0 and unneeded for loadable modules, Note: kernel/module/main.c includes <dynamic_debug.h> for struct _ddeubg_info. This might be prone to include loops, since its also included by printk.h. Nothing has broken in robot-land on this. cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220904214134.408619-12-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-15module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=mDavid Gow1-1/+1
The new KUnit module handling has KUnit test suites listed in a .kunit_test_suites section of each module. This should be loaded when the module is, but at the moment this only happens if KUnit is built-in. Also load this when KUnit is enabled as a module: it'll not be usable unless KUnit is loaded, but such modules are likely to depend on KUnit anyway, so it's unlikely to ever be loaded needlessly. Fixes: 3d6e44623841 ("kunit: unify module and builtin suite definitions") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-08-08Merge tag 'modules-6.0-rc1' of ↵Linus Torvalds6-33/+356
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "For the 6.0 merge window the modules code shifts to cleanup and minor fixes effort. This becomes much easier to do and review now due to the code split to its own directory from effort on the last kernel release. I expect to see more of this with time and as we expand on test coverage in the future. The cleanups and fixes come from usual suspects such as Christophe Leroy and Aaron Tomlin but there are also some other contributors. One particular minor fix worth mentioning is from Helge Deller, where he spotted a *forever* incorrect natural alignment on both ELF section header tables: * .altinstructions * __bug_table sections A lot of back and forth went on in trying to determine the ill effects of this misalignment being present for years and it has been determined there should be no real ill effects unless you have a buggy exception handler. Helge actually hit one of these buggy exception handlers on parisc which is how he ended up spotting this issue. When implemented correctly these paths with incorrect misalignment would just mean a performance penalty, but given that we are dealing with alternatives on modules and with the __bug_table (where info regardign BUG()/WARN() file/line information associated with it is stored) this really shouldn't be a big deal. The only other change with mentioning is the kmap() with kmap_local_page() and my only concern with that was on what is done after preemption, but the virtual addresses are restored after preemption. This is only used on module decompression. This all has sit on linux-next for a while except the kmap stuff which has been there for 3 weeks" * tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Replace kmap() with kmap_local_page() module: Show the last unloaded module's taint flag(s) module: Use strscpy() for last_unloaded_module module: Modify module_flags() to accept show_state argument module: Move module's Kconfig items in kernel/module/ MAINTAINERS: Update file list for module maintainers module: Use vzalloc() instead of vmalloc()/memset(0) modules: Ensure natural alignment for .altinstructions and __bug_table sections module: Increase readability of module_kallsyms_lookup_name() module: Fix ERRORs reported by checkpatch.pl module: Add support for default value for module async_probe
2022-08-02Merge tag 'linux-kselftest-kunit-5.20-rc1' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and an important feature to discourage running KUnit tests on production systems. Running tests on a production system could leave the system in a bad state. Summary: - Add a new taint type, TAINT_TEST to signal that a test has been run. This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc) - Several documentation and tool enhancements and fixes" * tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: KUnit: Fix example with compilation error Documentation: kunit: Add CLI args for kunit_tool kcsan: test: Add a .kunitconfig to run KCSAN tests kunit: executor: Fix a memory leak on failure in kunit_filter_tests clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro thunderbolt: test: Use kunit_test_suite() macro kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites kunit: unify module and builtin suite definitions selftest: Taint kernel when test module loaded module: panic: Taint the kernel when selftest modules load Documentation: kunit: fix example run_kunit func to allow spaces in args Documentation: kunit: Cleanup run_wrapper, fix x-ref kunit: test.h: fix a kernel-doc markup kunit: tool: Enable virtio/PCI by default on UML kunit: tool: make --kunitconfig repeatable, blindly concat kunit: add coverage_uml.config to enable GCOV on UML kunit: tool: refactor internal kconfig handling, allow overriding kunit: tool: introduce --qemu_args ...
2022-07-20module: Replace kmap() with kmap_local_page()Fabio M. De Francesco1-4/+4
kmap() is being deprecated in favor of kmap_local_page(). Two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). Tasks can be preempted and, when scheduled to run again, the kernel virtual addresses are restored and still valid. kmap_local_page() is faster than kmap() in kernels with HIGHMEM enabled. Since the use of kmap_local_page() in module_gzip_decompress() and in module_xz_decompress() is safe (i.e., it does not break the strict rules of use), it should be preferred over kmap(). Therefore, replace kmap() with kmap_local_page(). Tested on a QEMU/KVM x86_32 VM with 4GB RAM, booting kernels with HIGHMEM64GB enabled. Modules compressed with XZ or GZIP decompress properly. Cc: Matthew Wilcox <willy@infradead.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-14module: Show the last unloaded module's taint flag(s)Aaron Tomlin1-5/+11
For diagnostic purposes, this patch, in addition to keeping a record/or track of the last known unloaded module, we now will include the module's taint flag(s) too e.g: " [last unloaded: fpga_mgr_mod(OE)]" Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-14module: Use strscpy() for last_unloaded_moduleAaron Tomlin1-1/+1
The use of strlcpy() is considered deprecated [1]. In this particular context, there is no need to remain with strlcpy(). Therefore we transition to strscpy(). [1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-14module: Modify module_flags() to accept show_state argumentAaron Tomlin3-6/+9
No functional change. With this patch a given module's state information (i.e. 'mod->state') can be omitted from the specified buffer. Please note that this is in preparation to include the last unloaded module's taint flag(s), if available. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-12module: Move module's Kconfig items in kernel/module/Christophe Leroy1-0/+293
In init/Kconfig, the part dedicated to modules is quite large. Move it into a dedicated Kconfig in kernel/module/ MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is only used when MODULES are set, move it in with everything else to avoid confusion. MODULE_SIG_FORMAT is left in init/Kconfig because this configuration item is not used in kernel/modules/ but in kernel/ and can be selected independently from CONFIG_MODULES. It is for instance selected from security/integrity/ima/Kconfig. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11kunit: unify module and builtin suite definitionsJeremy Kerr1-0/+6
Currently, KUnit runs built-in tests and tests loaded from modules differently. For built-in tests, the kunit_test_suite{,s}() macro adds a list of suites in the .kunit_test_suites linker section. However, for kernel modules, a module_init() function is used to run the test suites. This causes problems if tests are included in a module which already defines module_init/exit_module functions, as they'll conflict with the kunit-provided ones. This change removes the kunit-defined module inits, and instead parses the kunit tests from their own section in the module. After module init, we call __kunit_test_suites_init() on the contents of that section, which prepares and runs the suite. This essentially unifies the module- and non-module kunit init formats. Tested-by: Maíra Canal <maira.canal@usp.br> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-11module: panic: Taint the kernel when selftest modules loadDavid Gow1-0/+7
Taint the kernel with TAINT_TEST whenever a test module loads, by adding a new "TEST" module property, and setting it for all modules in the tools/testing directory. This property can also be set manually, for tests which live outside the tools/testing directory with: MODULE_INFO(test, "Y"); Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-11module: Use vzalloc() instead of vmalloc()/memset(0)Yang Yingliang1-2/+1
Use vzalloc() instead of vmalloc() and memset(0) to simpify the code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11module: Increase readability of module_kallsyms_lookup_name()Christophe Leroy1-14/+24
module_kallsyms_lookup_name() has several exit conditions but can't return immediately due to preempt_disable(). Refactor module_kallsyms_lookup_name() to allow returning from anywhere, and reduce depth. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11module: Fix ERRORs reported by checkpatch.plChristophe Leroy2-4/+7
Checkpatch reports following errors: ERROR: do not use assignment in if condition + if ((colon = strnchr(name, MODULE_NAME_LEN, ':')) != NULL) { ERROR: do not use assignment in if condition + if ((mod = find_module_all(name, colon - name, false)) != NULL) ERROR: do not use assignment in if condition + if ((ret = find_kallsyms_symbol_value(mod, name)) != 0) ERROR: do not initialise globals to 0 +int modules_disabled = 0; Fix them. The following one has to remain, because the condition has to be evaluated multiple times by the macro wait_event_interruptible_timeout(). ERROR: do not use assignment in if condition + if (wait_event_interruptible_timeout(module_wq, Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11module: Add support for default value for module async_probeSaravana Kannan1-1/+10
Add a module.async_probe kernel command line option that allows enabling async probing for all modules. When this command line option is used, there might still be some modules for which we want to explicitly force synchronous probing, so extend <modulename>.async_probe to take an optional bool input so that async probing can be disabled for a specific module. Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RTAaron Tomlin1-11/+11
The commit 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage") under PREEMPT_RT=y, disabling preemption introduced an unbounded latency since the loop is not fixed. This change caused a regression since previously preemption was not disabled and we would dereference RCU-protected pointers explicitly. That being said, these pointers cannot change. Before kallsyms-specific data is prepared/or set-up, we ensure that the unformed module is known to be unique i.e. does not already exist (see load_module()). Therefore, we can fix this by using the common and more appropriate RCU flavour as this section of code can be safely preempted. Reported-by: Steven Rostedt <rostedt@goodmis.org> Fixes: 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage") Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01module: Fix "warning: variable 'exit' set but not used"Christophe Leroy1-4/+5
When CONFIG_MODULE_UNLOAD is not selected, 'exit' is set but never used. It is not possible to replace the #ifdef CONFIG_MODULE_UNLOAD by IS_ENABLED(CONFIG_MODULE_UNLOAD) because mod->exit doesn't exist when CONFIG_MODULE_UNLOAD is not selected. And because of the rcu_read_lock_sched() section it is not easy to regroup everything in a single #ifdef. Let's regroup partially and add missing #ifdef to completely opt out the use of 'exit' when CONFIG_MODULE_UNLOAD is not selected. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01module: Fix selfAssignment cppcheck warningChristophe Leroy1-5/+8
cppcheck reports the following warnings: kernel/module/main.c:1455:26: warning: Redundant assignment of 'mod->core_layout.size' to itself. [selfAssignment] mod->core_layout.size = strict_align(mod->core_layout.size); ^ kernel/module/main.c:1489:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1493:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1504:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1459:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ kernel/module/main.c:1463:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ kernel/module/main.c:1467:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ This is due to strict_align() being a no-op when CONFIG_STRICT_MODULE_RWX is not selected. Transform strict_align() macro into an inline function. It will allow type checking and avoid the selfAssignment warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01modules: Fix corruption of /proc/kallsymsAdrian Hunter1-3/+12
The commit 91fb02f31505 ("module: Move kallsyms support into a separate file") changed from using strlcpy() to using strscpy() which created a buffer overflow. That happened because: 1) an incorrect value was passed as the buffer length 2) strscpy() (unlike strlcpy()) may copy beyond the length of the input string when copying word-by-word. The assumption was that because it was already known that the strings being copied would fit in the space available, it was not necessary to correctly set the buffer length. strscpy() breaks that assumption because although it will not touch bytes beyond the given buffer length it may write bytes beyond the input string length when writing word-by-word. The result of the buffer overflow is to corrupt the symbol type information that follows. e.g. $ sudo cat -v /proc/kallsyms | grep '\^' | head ffffffffc0615000 ^@ rfcomm_session_get [rfcomm] ffffffffc061c060 ^@ session_list [rfcomm] ffffffffc06150d0 ^@ rfcomm_send_frame [rfcomm] ffffffffc0615130 ^@ rfcomm_make_uih [rfcomm] ffffffffc07ed58d ^@ bnep_exit [bnep] ffffffffc07ec000 ^@ bnep_rx_control [bnep] ffffffffc07ec1a0 ^@ bnep_session [bnep] ffffffffc07e7000 ^@ input_leds_event [input_leds] ffffffffc07e9000 ^@ input_leds_handler [input_leds] ffffffffc07e7010 ^@ input_leds_disconnect [input_leds] Notably, the null bytes (represented above by ^@) can confuse tools. Fix by correcting the buffer length. Fixes: 91fb02f31505 ("module: Move kallsyms support into a separate file") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-06-02module: Fix prefix for module.sig_enforce module paramSaravana Kannan1-0/+3
Commit cfc1d277891e ("module: Move all into module/") changed the prefix of the module param by moving/renaming files. A later commit also moves the module_param() into a different file, thereby changing the prefix yet again. This would break kernel cmdline compatibility and also userspace compatibility at /sys/module/module/parameters/sig_enforce. So, set the prefix back to "module.". Fixes: cfc1d277891e ("module: Move all into module/") Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aaron Tomlin <atomlin@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-26Merge tag 'modules-5.19-rc1' of ↵Linus Torvalds15-0/+5534
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: - It was time to tidy up kernel/module.c and one way of starting with that effort was to split it up into files. At my request Aaron Tomlin spearheaded that effort with the goal to not introduce any functional at all during that endeavour. The penalty for the split is +1322 bytes total, +112 bytes in data, +1210 bytes in text while bss is unchanged. One of the benefits of this other than helping make the code easier to read and review is summoning more help on review for changes with livepatching so kernel/module/livepatch.c is now pegged as maintained by the live patching folks. The before and after with just the move on a defconfig on x86-64: $ size kernel/module.o text data bss dec hex filename 38434 4540 104 43078 a846 kernel/module.o $ size -t kernel/module/*.o text data bss dec hex filename 4785 120 0 4905 1329 kernel/module/kallsyms.o 28577 4416 104 33097 8149 kernel/module/main.o 1158 8 0 1166 48e kernel/module/procfs.o 902 108 0 1010 3f2 kernel/module/strict_rwx.o 3390 0 0 3390 d3e kernel/module/sysfs.o 832 0 0 832 340 kernel/module/tree_lookup.o 39644 4652 104 44400 ad70 (TOTALS) - Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING), to enable tracking unloaded modules which did taint the kernel. - Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC which lets architectures to request having modules data in vmalloc area instead of module area. There are three reasons why an architecture might want this: a) On some architectures (like book3s/32) it is not possible to protect against execution on a page basis. The exec stuff can be mapped by different arch segment sizes (on book3s/32 that is 256M segments). By default the module area is in an Exec segment while vmalloc area is in a NoExec segment. Using vmalloc lets you muck with module data as NoExec on those architectures whereas before you could not. b) By pushing more module data to vmalloc you also increase the probability of module text to remain within a closer distance from kernel core text and this reduces trampolines, this has been reported on arm first and powerpc folks are following that lead. c) Free'ing module_alloc() (Exec by default) area leaves this exposed as Exec by default, some architectures have some security enhancements to set this as NoExec on free, and splitting module data with text let's future generic special allocators be added to the kernel without having developers try to grok the tribal knowledge per arch. Work like Rick Edgecombe's permission vmalloc interface [0] becomes easier to address over time. [0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r - Masahiro Yamada's symbol search enhancements * tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits) module: merge check_exported_symbol() into find_exported_symbol_in_section() module: do not binary-search in __ksymtab_gpl if fsa->gplok is false module: do not pass opaque pointer for symbol search module: show disallowed symbol name for inherit_taint() module: fix [e_shstrndx].sh_size=0 OOB access module: Introduce module unload taint tracking module: Move module_assert_mutex_or_preempt() to internal.h module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code module.h: simplify MODULE_IMPORT_NS powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx module: Remove module_addr_min and module_addr_max module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC module: Introduce data_layout module: Prepare for handling several RB trees module: Always have struct mod_tree_root module: Rename debug_align() as strict_align() module: Rework layout alignment to avoid BUG_ON()s module: Move module_enable_x() and frob_text() in strict_rwx.c module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX module: Move version support into a separate file ...
2022-05-12module: merge check_exported_symbol() into find_exported_symbol_in_section()Masahiro Yamada1-15/+7
Now check_exported_symbol() always succeeds. Merge it into find_exported_symbol_in_search() to make the code concise. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: do not binary-search in __ksymtab_gpl if fsa->gplok is falseMasahiro Yamada1-2/+3
Currently, !fsa->gplok && syms->license == GPL_ONLY) is checked after bsearch() succeeds. It is meaningless to do the binary search in the GPL symbol table when fsa->gplok is false because we know find_exported_symbol_in_section() will fail anyway. This check should be done before bsearch(). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: do not pass opaque pointer for symbol searchMasahiro Yamada1-7/+4
There is no need to use an opaque pointer for check_exported_symbol() or find_exported_symbol_in_section. Pass (struct find_symbol_arg *) explicitly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: show disallowed symbol name for inherit_taint()Lecopzer Chen1-6/+6
The error log for inherit_taint() doesn't really help to find the symbol which violates GPL rules. For example, if a module has 300 symbol and includes 50 disallowed symbols, the log only shows the content below and we have no idea what symbol is. AAA: module using GPL-only symbols uses symbols from proprietary module BBB. It's hard for user who doesn't really know how the symbol was parsing. This patch add symbol name to tell the offending symbols explicitly. AAA: module using GPL-only symbols uses symbols SSS from proprietary module BBB. Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: fix [e_shstrndx].sh_size=0 OOB accessAlexey Dobriyan1-0/+4
It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 Fixes: ec2a29593c83 ("module: harden ELF info handling") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> [rebased patch onto modules-next] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: Introduce module unload taint trackingAaron Tomlin4-0/+88
Currently, only the initial module that tainted the kernel is recorded e.g. when an out-of-tree module is loaded. The purpose of this patch is to allow the kernel to maintain a record of each unloaded module that taints the kernel. So, in addition to displaying a list of linked modules (see print_modules()) e.g. in the event of a detected bad page, unloaded modules that carried a taint/or taints are displayed too. A tainted module unload count is maintained. The number of tracked modules is not fixed. This feature is disabled by default. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: Move module_assert_mutex_or_preempt() to internal.hAaron Tomlin2-11/+12
No functional change. This patch migrates module_assert_mutex_or_preempt() to internal.h. So, the aforementiond function can be used outside of main/or core module code yet will remain restricted for internal use only. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-12module: Make module_flags_taint() accept a module's taints bitmap and usable ↵Aaron Tomlin2-4/+5
outside core code No functional change. The purpose of this patch is to modify module_flags_taint() to accept a module's taints bitmap as a parameter and modifies all users accordingly. Furthermore, it is now possible to access a given module's taint flags data outside of non-essential code yet does remain for internal use only. This is in preparation for module unload taint tracking support. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-04-05module: Remove module_addr_min and module_addr_maxChristophe Leroy1-3/+3
Replace module_addr_min and module_addr_max by mod_tree.addr_min and mod_tree.addr_max Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-04-05module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOCChristophe Leroy6-6/+82
Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC to allow architectures to request having modules data in vmalloc area instead of module area. This is required on powerpc book3s/32 in order to set data non executable, because it is not possible to set executability on page basis, this is done per 256 Mbytes segments. The module area has exec right, vmalloc area has noexec. This can also be useful on other powerpc/32 in order to maximize the chance of code being close enough to kernel core to avoid branch trampolines. Cc: Jason Wessel <jason.wessel@windriver.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mcgrof: rebased in light of kernel/module/kdb.c move] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-04-05module: Introduce data_layoutChristophe Leroy4-22/+28
In order to allow separation of data from text, add another layout, called data_layout. For architectures requesting separation of text and data, only text will go in core_layout and data will go in data_layout. For architectures which keep text and data together, make data_layout an alias of core_layout, that way data_layout can be used for all data manipulations, regardless of whether data is in core_layout or data_layout. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 05:33:58 +0000