summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-07wifi: iwlwifi: mvm: replace usage of found with dedicated list iterator variableJakob Koschel1-4/+3
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. While at it, stop using the unnecessary _safe() variant. [1] https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> [change to not use _safe variant] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.e4882dc35543.I32b2b945ba234de72ee119fc20f5b8be02b6a3f2@changeid
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg1-4/+4
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg1-2/+2
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: make iwl_fw_lookup_cmd_ver() take a cmd_idJohannes Berg1-2/+1
Instead of taking the group/command separately, make the function take a combined command ID. In many cases, this allows us to pass an existing command ID (e.g. cmd.id), or introduce a new variable for it, so that we don't use the command ID twice. This way, we can also use LONG_GROUP implicitly, so we don't need to spell that out for many commands. Apart from mvm.h, fw/img.{c,h} changes and some copyright and indentation updates, this was done with spatch: @@ identifier cmd; expression fw, G, C, def; @@ struct iwl_host_cmd cmd = { .id = WIDE_ID(G, C), ... }; ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier cmd; expression fw, C, def; @@ struct iwl_host_cmd cmd = { .id = C, ... }; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = WIDE_ID(G, C); ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = C; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ expression fw, C, def; @@ -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, C, def) @@ expression fw, C, G, def; @@ -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: prefer WIDE_ID() over iwl_cmd_id()Johannes Berg1-10/+7
The order of arguments for iwl_cmd_id() is confusing, and the version is always 0 and thus a useless argument. Prefer the WIDE_ID() macro (which needs to be a macro due to use in switch cases etc.) over the iwl_cmd_id() function. Obviously done with spatch: @@ expression G, C; @@ -iwl_cmd_id(C, G, 0) +WIDE_ID(G, C) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: fix AUX ROC removalAvraham Stern1-3/+6
When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event always tries to cancel session protection. However, AUX ROC does not use session protection so it was never removed. As a result, if the driver tries to allocate another AUX ROC event right after cancelling the first one, it will fail with a warning. In addition, the time event data passed to iwl_mvm_remove_aux_roc_te() is incorrect. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: test roc running status bits before removing the staNathan Errera1-3/+12
In some cases the sta is being removed twice since we do not test the roc aux running before removing it. Start looking at the bit before removing the sta. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: avoid clearing a just saved session protection idShaul Triebitz1-6/+6
When scheduling a session protection the id is saved but then it may be cleared when calling iwl_mvm_te_clear_data (if a previous session protection is currently active). Fix it by saving the id after calling iwl_mvm_te_clear_data. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-09-16iwlwifi: mvm: Fix possible NULL dereferenceIlan Peer1-1/+2
In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it. Fixes: 7b3954a1d69a ("iwlwifi: mvm: Explicitly stop session protection before unbinding") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210907143156.e80e52167d93.Ie2247f43f8acb2cee6dff5b07a3947c79a772835@changeid
2021-08-26iwlwifi: mvm: don't schedule the roc_done_wk if it is already runningAvraham Stern1-12/+19
When P2P roc is removed, the IWL_MVM_STATUS_NEED_FLUSH_P2P bit is set to indicate to iwl_mvm_roc_done_wk() that the removed roc is a P2P one, so it will flush the broadcast station and not the aux station. However, since setting this bit and scheduling the worker is done in roc ended flow as well as in case the roc is removed, there is a race where the worker has already started running (but did not test this bit yet) and then it is scheduled again. In this case, the first run of the worker will clear this bit, and thus the second run will find it already cleared and will try to flush and remove the aux station by mistake. Fix it by scheduling the worker only if this bit is not yet set. In case this bit is already set, the worker is either running or scheduled, so there is no need to re-schedule it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.8c147659b331.If5924375e9bfd46214ab8ab81cb9d0f5c82fbcbc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: trigger WRT when no beacon heardShaul Triebitz1-0/+10
If the session protection ends but no beacon was heard, the driver triggers a disconnection. Trigger WRT in that case so it can be debugged. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.7bf71939826b.Id73f1a466929670f5ec54301227d68883afd9207@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: mvm: Explicitly stop session protection before unbindingIlan Peer1-11/+30
In case of unbinding, the FW would remove the session protection time events without sending a notification, so explicitly cancel the session protection, so future requests for mgd_prepare_tx() would not assume that the session protection is running. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618105614.7c30f85ed241.Ibc19fdbefca7135f2c4ea83d0aef6b81b5033dcd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: mvm: fix error print when session protection endsShaul Triebitz1-0/+4
When the session protection ends and the Driver is not associated or a beacon was not heard, the Driver prints "No beacons heard...". That's confusing for the case where not associated. Change the print when not associated to "Not associated...". Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210617100544.41a5a5a894fa.I9eabb76e7a3a7f4abbed8f2ef918f1df8e825726@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't WARN if we can't remove a time eventEmmanuel Grumbach1-2/+2
It is not very useful to WARN if we can't send a host command The firmware is likely in a bad situation and the fact that we didn't send the host command has an impact on the firmware only, not on the driver. The driver could clean up all its state. Don't WARN in this case, but just leave a smaller note. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.0324abc169c8.I4f9b769bc38d68f8ed43f77d2cd75e8f1993e964@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't disconnect immediately if we don't hear beacons after CSAEmmanuel Grumbach1-1/+12
When we switch channel, we may miss a few beacons on the new channel. Don't disconnect if the time event for the switch ends before we hear the beacons. Note that this is relevant only for old devices that still use the TIME_EVENT firmware API for channel switch. The check that we hear a beacon before the time event ends was meant to be used for the association time event and not for the channel switch time event. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.3d710091a0bd.I37a161ffdfb099a10080fbdc3b70a4deb76952e2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: enable TX on new CSA channel before disconnectingSara Sharon1-0/+10
When moving to the new channel, we block TX until we hear the first beacon. if it is not heard, we proceed to disconnect. Since TX is blocked (without mac80211 being aware of it) the frame is stuck, resulting with queue hang. Instead, reenable TX before reporting on the connection loss. As we are on the new channel, there is no problem with that, even if the original CSA had quiet mode. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.eb4f2ff1b863.Ib16238106b33d58b2b7688dc6297018b915ecef4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: don't check if CSA event is running before removingSara Sharon1-3/+0
We may want to remove it before it started (i.e. before the actual switch time). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 58ddd9b6d194 ("iwlwifi: mvm: don't send a CSA command the firmware doesn't know") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.835db8987b8a.Ic6c5d28d744302db1bc6c4314bd3138ba472f834@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-62/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-11-10iwlwifi: mvm: properly cancel a session protection for P2PEmmanuel Grumbach1-31/+63
We need to feed the configuration id to remove session protection properly. Remember the conf_id when we add the session protection so that we can give it back when we want to remove the session protection. While at it, slightly improve the kernel doc for the conf_id of the notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.3642f730333d.I01a98ecde62096d00d171cf34ad775bf80cb0277@changeid
2020-11-10iwlwifi: mvm: use the HOT_SPOT_CMD to cancel an AUX ROCEmmanuel Grumbach1-3/+6
The ROC that runs on the AUX ROC (meaning an ROC on the STA vif), was added with the HOT_SPOT_CMD firmware command and must be cancelled with that same command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.a317376154da.I44fa3637373ba4bd421cdff2cabc761bffc0735f@changeid
2020-10-08iwlwifi: mvm: don't send a CSA command the firmware doesn't knowEmmanuel Grumbach1-0/+22
We introduced a new flow to remove an on-going CSA but we assumed the firwmare understands the CHANNEL_SWITCH_TIME_EVENT_CMD. This is not true for 7265 and down. Don't send this command for those devices, but rather use the older command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.2574e3e47927.Ic0c56411da1096e9a45ee5c3383edf777c5baca0@changeid
2020-10-08iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12Nathan Errera1-0/+6
ADD_STA_CMD_API_S ver 12 was added in order to properly support auxiliary activities in CDB NICs. In the new version we don't need to allocate an aux station at initialization, instead we add an aux station only when an auxiliary activity that requires a dedicated Tx queue is needed. For now the only case we need this kind of activity is when using hot spot 2.0 Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.700e6e2e3077.Icdd807b6a3ad3fed806449ea0a13f856aa20e632@changeid
2020-10-08iwlwifi: mvm: prepare roc_done_wk to work syncNathan Errera1-12/+9
As part of changes made to properly support auxiliary activities in CDB NICs, an aux sta will be added when using hot spot 2.0 and will need to be removed when roc flow is done. In order to do so, prepare the roc_done_wk to work synchronously as the rm_aux_sta is a SYNC command. Since now all of th iwl_mvm_flush_sta function are using it sync, removed the flag argument from the function. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.71b441c8b682.Ia1d216cb680308b91d6da9f73e23ae9f4baac79f@changeid
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin1-1/+1
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-06iwlwifi: mvm: take the required lock when clearing time event dataAvraham Stern1-0/+4
When receiving a session protection end notification, the time event data is cleared without holding the required lock. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.a49846a634e4.Id1ada7c5a964f5e25f4d0eacc2c4b050015b46a2@changeid
2020-02-03iwlwifi: mvm: fix TDLS discovery with the new firmware APIEmmanuel Grumbach1-11/+60
I changed the API for asking for a session protection but I omitted the TDLS flows. Fix that now. Note that for the TDLS flow, we need to block until the session protection actually starts, so add this option to iwl_mvm_schedule_session_protection. This patch fixes a firmware assert in the TDLS flow since the old TIME_EVENT_CMD is not supported anymore by newer firwmare versions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: fe959c7b2049 ("iwlwifi: mvm: use the new session protection command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: mvm: use the new session protection commandEmmanuel Grumbach1-1/+188
The firmware has now a new session protection command. This new API allows the firmware to manage the protection needed for association. It'll also remove the event when the association is complete. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach1-6/+2
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: Don't sleep in RX pathAndrei Otcheretianski1-1/+1
Don't use cancel_delayed_work_sync() inside the channel switch notifications as they are handled synchronously as part of the RX path. Fix that by replacing it with cancel_delayed_work(). This should be safe as we don't really care whether the work is already started and in such case we would disconnect anyway. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: disconnect in case of bad channel switch parametersSara Sharon1-2/+3
In case we receive channel switch announcement with immediate quiet and unknown switching time, we will switch when FW identifies AP left channel. However, if AP remains on channel, we will eventually get TX queue hang. Init a work to disconnect if switch doesn't occur within 1500 milliseconds. Do it also for a too long channel switch. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: Fix possible NULL pointer dereferenceAvraham Stern1-1/+1
iwl_mvm_te_clear_data() is called for cleanup in case sending the HOT_SPOT_CMD failed. However, in case sending the command caused a fw error and restart (e.g. if the command is not supported) then the te_data pointer may no longer be valid, which leads to a NULL pointer dereference. Fix it by checking that the te_data pointer is not NULL before dereferencing it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: Change FW channel info APIDavid Spinadel1-1/+3
Change iwl_fw_channel_info structure so it can have channel number greater than 255. This is needed for 6 GHz channel numbers. Change all relevant structs and member accesses accordingly. The new API is indicated by a TLV capability bit. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: Flush transmit queues on P2P Device ROC doneIlan Peer1-0/+1
When a time event for a P2P Device interface is done, it is possible that there is still a frame pending for transmission that should be flushed. Set the IWL_MVM_STATUS_NEED_FLUSH_P2P to indicate to the ROC worker that P2P Device station queue need also to be flushed. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: group trigger condition to helper functionSara Sharon1-7/+4
The triplet of get trigger, is trigger enabled and is trigger stopped repeats itself. Group them in a function to avoid code duplication. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-19iwlwifi: mvm: Increase session protection time after CSAndrei Otcheretianski1-7/+8
After switching to a new channel, driver schedules session protection time event in order to hear the beacon on the new channel. The duration of the protection is two beacon intervals. However, since we start to switch slightly before beacon with count 1, in case we don't hear (or AP doesn't transmit) the very first beacon on the new channel the protection ends without hearing any beacon at all. At this stage the switch is not complete, the queues are closed and the interface doesn't have quota yet or TBTT events. As the result, we are stuck forever waiting for iwl_mvm_post_channel_switch() to be called. Fix this by increasing the protection time to be 3 beacon intervals and in addition drop the connection if the time event ends before we got any beacon. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-02iwlwifi: mvm: Fix channel switch for count 0 and 1Andrei Otcheretianski1-2/+4
It was assumed that apply_time==0 implies immediate scheduling, which is wrong. Instead, the fw expects the START_IMMEDIATELY flag to be set. Otherwise, this resulted in 0x3063 assert. Fix that. While at it rename the T2_V2_START_IMMEDIATELY to TE_V2_START_IMMEDIATELY. Fixes: f5d8f50f271d ("iwlwifi: mvm: Fix channel switch in case of count <= 1") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-19Merge tag 'wireless-drivers-next-for-davem-2017-12-18' of ↵David S. Miller1-13/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was resolved using a diff provided by Kalle in his pull request. Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 A bigger pull request this time, the most visible change being the new driver mt76. But there's also Kconfig refactoring in ath9k and ath10k, work beginning in iwlwifi to have rate scaling in firmware/hardware, wcn3990 support getting closer in ath10k and lots of smaller changes. mt76 * a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek ath10k * enable multiqueue support for all hw using mac80211 wake_tx_queue op * new Kconfig option ATH10K_SPECTRAL to save RAM * show tx stats on QCA9880 * new qcom,ath10k-calibration-variant DT entry * WMI layer support for wcn3990 ath9k * new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM wcn36xx * hardware scan offload support wil6210 * run-time PM support when interface is down iwlwifi * initial work for rate-scaling offload * Support for new FW API version 36 * Rename the temporary hw name A000 to 22000 ssb * make SSB a menuconfig to ease disabling it all mwl8k * enable non-DFS 5G channels 149-165 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05iwlwifi: mvm: remove set but unused variable in iwl_mvm_roc_done_wkEmmanuel Grumbach1-7/+2
Since the removal of non-DQA code, we don't need the queues variable any more. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: flush queue before deleting ROCJohannes Berg1-2/+22
Before deleting a time event (remain-on-channel instance), flush the queue so that frames cannot get stuck on it. We already flush the AUX STA queues, but a separate station is used for the P2P Device queue. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-28iwlwifi: mvm: remove superfluous flush_work()Johannes Berg1-6/+0
Since iwl_mvm_start_p2p_roc() is only called from iwl_mvm_roc(), which already flushes the same work item, doing it again in it is superfluous. Remove it and move the comment to the first one. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-18iwlwifi: mvm: remove session protection to allow channel switchAvraham Stern1-2/+32
If a time event is already scheduled when trying to schedule one for channel switch, the code assumes the channel switch is already scheduled and no further action is required. However, it is possible that the scheduled time event is actually for session protection (e.g. when the first beacon after association contains the CSA IE). In this case the channel switch will not be scheduled which will finally lead to disconnection. Fix this by removing the old time event and schduling a new one for the channel switch. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: remove non-DQA modeJohannes Berg1-4/+1
All the firmware versions the driver supports enable DQA, and thus the only way to get non-DQA mode is to modify the source. Remove this mode to simplify the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: refactor firmware debug codeJohannes Berg1-7/+8
Split out the firmware debug code to be more general, so that it can be used by different subdrivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: move notification wait into fw/Johannes Berg1-1/+1
Move the notification wait code into the new fw interaction directory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02iwlwifi: mvm: flush per station for DQA modeSara Sharon1-1/+4
Avoid using the global flush and move to flush per station whenever possible in DQA mode. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-03-09iwlwifi: mvm: ROC: cleanup time event info on FW failureMatti Gottlieb1-11/+4
Currently when the FW sends start/stop aux roc time event notification with an error status, the driver returns an error value, but does not remove the time event, and does not notify the stack above that the time event is over. This causes problems that the stack above assumes we are still in the middle of a time event, and therefore can block different events, such as scanning. On FW failure notification, cleanup the time event parameters and notify the stack above that the time event is over. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-13iwlwifi: mvm: cleanup roc te on restart cleanupEliad Peller1-13/+25
iwl_mvm_restart_cleanup() calls ieee80211_remain_on_channel_expired() on cleanup, but it doesn't clean the actual roc time events, resulting in failure of further ROC attempts. Refactor iwl_mvm_stop_roc() a bit, and add a new function to only cleanup the roc time events (without sending further commands). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: change the Intel Wireless email addressEmmanuel Grumbach1-1/+1
ilw@linux.intel.com is not available anymore. linuxwifi@intel.com should be used instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: mvm: move fw-dbg code to separate fileGolan Ben-Ami1-0/+1
The fw debug functionality is big enough to warrant a separate file. Move existing related functions to the new file. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo1-0/+872
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-21 13:08:23 +0000