summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)2-2/+2
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-20wifi: iwlwifi: fw: skip PPAG for JFJohannes Berg1-0/+5
For JF RFs we don't support PPAG, but many firmware images lie about it. Always skip support for JF to avoid firmware errors when sending the command. Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds39-350/+1534
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-07wifi: iwlwifi: fw: use correct IML/ROM status registerJohannes Berg1-1/+1
Different registers should be used, but they code wasn't adjusted for the 'error' register, only for the 'data1'. Fix that. Coverity CID: 1487176 Coverity CID: 1487230 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.28de1a5b2493.I356c9404623fd5ef793d47481fe37a95be355c6b@changeid
2022-12-07wifi: iwlwifi: dump: Update check for UMAC valid FW addressMukesh Sisodiya1-1/+5
The error dump base address check for UMAC need an update based on current hardware. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.e4b7fc650144.I46103baf400bb4ae69d82738e402a3903b17c030@changeid
2022-12-07wifi: iwlwifi: mvm: d3: add TKIP to the GTK iteratorNaftali Goldstein1-2/+7
This was missed when this function was refactored out of iwl_mvm_wowlan_program_keys. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.746f40250502.Ieef45ffc617726cb47b3a4ec625d513d16082f4b@changeid
2022-12-07wifi: iwlwifi: mei: clean up commentsTom Rix5-11/+11
SPDX *.h use /* */ style comments Spelling replacements commnunication to communication adsress to address procotol to protocol addtional to additional kown to know negotiaion to negotiation mssage to message Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.f1ff5aff270b.Ie4ba3f980a35455ed95e7c0cae854231fccc89e2@changeid
2022-12-07wifi: iwlwifi: mvm: Don't use deprecated registerMiri Korenblit1-3/+6
The CSR_HW_IF_CONFIG_REG register is no longer in use from IWL_DEVICE_FAMILY_AX210 and on. This register uses now for CSR_CTXT_INFO_BOOT_CTRL which has a different meaning and a different format. Currently we're writing to the register according to CSR_HW_IF_CONFIG_REGs format, regardless to the device family. This causes to miss-interpretation of the register value, as it is parsed according to CSR_CTXT_INFO_BOOT_CTRLs format for devices families >= IWL_DEVICE_FAMILY_AX210. Fix this by writing to the register according to the old format only for the relevant hardware. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.8e91eb10dc7d.I3882a2452785ef8b455d99af235e4477917bf46d@changeid
2022-12-07wifi: iwlwifi: pcie: Add reading and storing of crf and cdb id.Mukesh Sisodiya2-10/+27
Read and store crf and cdb id details to make it available during driver's lifetime Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.888b30780128.Ic8c4c088a75a0d7092d6301ef3760a118a06d819@changeid
2022-12-07wifi: iwlwifi: mvm: replace usage of found with dedicated list iterator variableJakob Koschel2-11/+8
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. While at it, stop using the unnecessary _safe() variant. [1] https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> [change to not use _safe variant] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.e4882dc35543.I32b2b945ba234de72ee119fc20f5b8be02b6a3f2@changeid
2022-12-07wifi: iwlwifi: dump: Update check for valid FW addressMukesh Sisodiya1-2/+3
The error dump base address need an update based on current hardware. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.a521691632e9.Ic15fa65107c0d4d0b555a1fb3a2a20ab2725b683@changeid
2022-12-07wifi: iwlwifi: mvm: don't access packet before checking lenMordechay Goodstein1-18/+20
Currently in sniffer mode we access pkt fields before checking that the frame has the length to access it. Fix this by moving the check to before the access. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.934da230c698.Ib56f11bbc8978e15d38394336a929cb4996ba39e@changeid
2022-12-07wifi: iwlwifi: modify new queue allocation commandJohannes Berg2-16/+26
Follow a new firmware API changes and update the queue allocation command in the remove/modify cases to take the station mask and TID instead of the queue ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.2925b38d3929.Ib8467711590c1969817c3321509eb131f4230e15@changeid
2022-12-07wifi: iwlwifi: nvm-parse: enable WiFi7 for Fm radio for nowJohannes Berg1-0/+2
We're still working out how the hardware/firmware (will) advertise support for this - for now, assume that Fm radio supports it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.f73face1a674.Ic62ee5c61c0ef2a5b5e9f89782b7bc82b0caa408@changeid
2022-11-28wifi: iwlwifi: mei: fix parameter passing to iwl_mei_alive_notif()Gregory Greenman1-1/+2
Pass true explicitly to iwl_mei_alive_notif() when we can be sure that Alive notification was received. The issue was discovered by Smatch. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/all/Y3uYUEFnMiBY2ABQ@kili/ Link: https://lore.kernel.org/r/20221123225313.83c2251055c1.Ia028357e7ab36dfc2abf85106a5926ee7893a408@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: return error value in case PLDR sync failedAvraham Stern1-1/+1
In case PLDR sync is required but iwlmei failed to get a response from CSME, the device cannot be brought up, so return an error value. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/all/Y3uYUEFnMiBY2ABQ@kili/ Signed-off-by: Avraham Stern <avraham.stern@intel.com> Link: https://lore.kernel.org/r/20221123225313.08b345123f83.I13bfacc2f6da7de8ada90127fe7108d1bb73af92@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: trigger PCI re-enumeration in case of PLDR syncAvraham Stern7-41/+73
When doing the PLDR flow, the fw goes through a re-read and needs PCI re-enumeration in order to recover. In this case, skip the mac start retry and fw dumps as all the fw and registers are invalid until the PCI re-enumeration. In addition, print the register that shows the re-read counter when loading the fw. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Link: https://lore.kernel.org/r/20221123225313.9ae77968961e.Ie06e886cef4b5921b65dacb7724db1276bed38cb@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: fix double free on tx path.Ben Greear1-1/+11
We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 </TASK> Allocated by task 9650: kasan_save_stack+0x1c/0x40 __kasan_slab_alloc+0x6d/0x90 kmem_cache_alloc_node+0xf3/0x2b0 __alloc_skb+0x191/0x220 tcp_stream_alloc_skb+0x3f/0x330 tcp_sendmsg_locked+0x67c/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 9650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x102/0x170 kmem_cache_free+0xc8/0x3e0 iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm] ieee80211_queue_skb+0x874/0xd10 [mac80211] ieee80211_xmit_fast+0xf80/0x1180 [mac80211] __ieee80211_subif_start_xmit+0x287/0x680 [mac80211] ieee80211_subif_start_xmit+0xcd/0x730 [mac80211] dev_hard_start_xmit+0xf6/0x420 __dev_queue_xmit+0x165b/0x1b50 ip_finish_output2+0x66e/0xfb0 __ip_finish_output+0x487/0x6d0 ip_output+0x11c/0x350 __ip_queue_xmit+0x36b/0x9d0 __tcp_transmit_skb+0xb35/0x15c0 tcp_write_xmit+0x3f1/0x24d0 tcp_sendmsg_locked+0x8a9/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88813cfa4b40 which belongs to the cache skbuff_fclone_cache of size 472 The buggy address is located 96 bytes inside of 472-byte region [ffff88813cfa4b40, ffff88813cfa4d18) The buggy address belongs to the physical page: page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4 head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff) raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240 raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code") Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/ Tested-by: Amol Jawale <amol.jawale@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: print OTP info after aliveDaniel Gabay1-0/+12
These are register values which are needed for debug regardless of alive fail/success. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Link: https://lore.kernel.org/r/20221123225313.a5ae3679491b.Ic618934df084a9b269e56d892665523c79e40eee@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: nvm: Update EHT capabilities for GL deviceAbhishek Naik1-0/+23
Update EHT MAC and PHY capabilities for GL device for station and softap interface. Add relevant code in nvm_fixup_sband_iftd. Signed-off-by: Abhishek Naik <abhishek.naik@intel.com> Link: https://lore.kernel.org/r/20221122220713.1da816ab7ffc.Ief570e27007c9e2ad3a97bee4b074e2fc1c75bae@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: nvm-parse: support A-MPDU in EHT 2.4 GHzJohannes Berg1-0/+3
We support large A-MPDU in EHT in 2.4 GHz, so add the right bits for that in the EHT capabilities. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20221122220713.3e7449760415.Id394d7fd0acaca48d429feccda4e66dbadaab993@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: advertise 320 MHz in 6 GHz only conditionallyJohannes Berg1-0/+4
We can't have it in AP mode unless for debug, since we don't have 160 MHz in HE PHY capabilities, and also set it only in 6 GHz even if (unlike in HE) it's always defined. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20221122220713.293ef3e5a1c4.I867526a6bd3f93ee50076ff359436dfb5ec6101c@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: set HE PHY bandwidth according to bandJohannes Berg1-10/+17
The bits are reserved on the opposite bands, so we shouldn't always send them, only the 2G bit on 2.4 GHz and the 5G bits on 5/6GHz. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20221122220713.0a075d00c796.Ib4cac0b7f90dfadebceceb1e07c8cdfd7a4138f6@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: support PPE Thresholds for EHTMiri Korenblit2-30/+153
In an EHT connection fill in the HE context command with PPE Thresholds field from EHT Capabilities IE. If PPE Thresholds field presents only in HE Capabilities IE, take the thresholds from there. If it's not present in both - set the Common Nominal Packet Padding field from EHT Capabilities IE. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/r/20221122220713.062ac86110f2.I0bcd5ee35f4d987a49f15501985f90e0d3ce7590@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: add support for EHT 1K aggregation sizeMordechay Goodstein1-2/+8
In 11be we can receive 1K aggregation size so update our max HW rx aggregation for mac80211 usage. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20221122220713.ef0431f64975.Ie4d90c376c822694f4523ff0fb5731f20004c24d@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11beMordechay Goodstein3-8/+129
Rate scale needs to be configured to what MCS it can use per BW and NSS, this is done by parsing our capabilities of TX and peer's capabilities of RX and setting the minimum for rate scale usage. Also do some cleanup removing redundant enum defines not used by FW/Driver. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20221122220713.f71f3b4c4583.I7b5e8071df91146c4bee3e9bcb7ad62595b275e1@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: support 320 MHz PHY configurationJohannes Berg3-45/+44
Support 320 MHz PHY configuration and while doing so rewrite the code since we'd otherwise double the number of cases in the switch statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20221122220713.964db911b733.If56c94a9bf20c050f35d2421b680e400a9f4aeb8@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-28wifi: iwlwifi: mvm: Advertise EHT capabilitiesIlan Peer4-18/+167
Add support for advertising EHT capabilities if supported by device SKU and not disabled by module parameters. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20221122220713.6bc00d851794.I214005645f3da21d8f2458a70355deeca04a19e8@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld1-1/+1
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld1-1/+1
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-10wifi: iwlwifi: mei: wait for the mac to stop on suspendAvraham Stern1-2/+21
When iwlmei driver is removed, it removes all the interfaces since CSME will take over the NIC while there is no SAP connection. When the iwlmei driver is removed due to the host being suspended, this results in the interface being down after resume since the interface was removed on suspend so mac80211 will not try to bring it up on resume. Since on suspend the mac is stopped anyway by mac80211, there is no need to remove the interface in this case. Wait for the mac to stop instead. Once the mac is stopped, the driver will not access the NIC anymore so it is safe for CSME to take over. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.371102f04586.I813a964607b3e92ea275a0cf56df57227c11ae88@changeid
2022-11-10wifi: iwlwifi: iwlmei: report disconnection as temporaryAvraham Stern1-1/+1
Disconnections are reported to CSME as long link down. As a result, CSME will take ownership right away so the host doesn't have a chance to reconnect, although in many cases it could quickly reconnect and preserve host connectivity. Report disconnections as temporary so CSME will give the host some grace time to reconnect. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.401665457652.Ie5de9eacc5a51cf0965a08c202caf3fbc3a91ec4@changeid
2022-11-10wifi: iwlwifi: mei: use wait_event_timeout() return valueAvraham Stern1-20/+1
wait_event_timeout() return value indicates whether the condition evaluated to true or not, so no need to re-take the lock and check the got_ownership flag. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.33159054626f.Ief9e2dc42f96f8044c197d32172003a5ead0f8d3@changeid
2022-11-10wifi: iwlwifi: mei: implement PLDR flowAvraham Stern5-0/+183
If the FW needs to do OTP re-read, the driver must notify CSME before loading the FW so CSME will not try to access the NIC during the re-read. Once the alive notification is received, CSME is notified that NIC access is allowed again. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.49eb8c6d455f.I7f0a5debb2d3d662a4151199bbec24613f324c13@changeid
2022-11-10wifi: iwlwifi: mvm: Fix getting the lowest rateIlan Peer4-11/+59
When setting the rate for Tx, the code tried to get the lowest allowed rate but without considering the BSS basic rates. Fix this by considering the basic rates. In addition, declare support for configuring beacon Tx rate and when configured use the configured Tx beacon rate to set beacon tx command rate. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.be8403f0d5c0.I7d141646746b96310efd75fc77ca9aebc61aefcc@changeid
2022-11-10wifi: iwlwifi: mvm: support new key APIJohannes Berg7-2/+337
In order to support MLD, the key API is also changing to have station masks instead of just the station ID etc. Change the driver to support this, and add the new code in a new file so it's more clearly separated. For now this isn't separated at the mac80211 ops level, which we wanted to do, but we're calling these functions in a place when pre-start keys are installed in iwl_mvm_start_ap_ibss(), and the function has some glue logic to mac80211. We may want to change that later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
2022-11-10wifi: iwlwifi: dbg: use bit of DRAM alloc ID to store failed allocsRotem Saado1-1/+1
The failed_alloc variable is used as a bitmask in the loop where we check DRAM allocations. But erroneously, we were clearing the DRAM alloc IDs we removed as an integer. Fix that by clearing them as bits instead. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.688dec28b1d9.I470b8d29c28d16f25f4192773f075940de7ed33c@changeid
2022-11-10wifi: iwlwifi: mvm: print an error instead of a warning on invalid rateLuca Coelho1-3/+5
In some rare occasions, the firmware may let some frames with invalid rates, such as CCK rates on the high band, come through. This causes the driver to issue a warning, but since this is a possible issue and it's not really a bug in the driver, convert the warning into an error. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.3d3673c70556.I13464b11d405fd6021618b0a32404cecb7e9ac51@changeid
2022-11-10wifi: iwlwifi: cfg: disable STBC for BL step A devicesLuca Coelho1-3/+17
The A step of BL devices doesn't support STBC, so we need to disable it. Create new HT params and a macro to use specifically with BL A-step devices where STBC is disabled. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.806dbfa53f40.I4b14a8be30795bdcd73686bd1f9222e7ab93b505@changeid
2022-11-10wifi: iwlwifi: dbg: add support for DBGC4 on BZ family and aboveRotem Saado1-1/+4
Update the for loop that iterates over all the DBGCs to include DBGC4. DBGC4 is only supported staring from the BZ family of devices, so check the family before accepting it. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.0b6050b41060.Id662c716c2e3c2c850740d1f71e2801e02aeddaf@changeid
2022-11-10wifi: iwlwifi: mvm: use old checksum for Bz A-stepJohannes Berg2-3/+20
For Bz A-step hardware, the checksum offload is broken and we need to use the old way, which is still there. Do that, which requires taking the checksum capability bits out of the IWL_DEVICE_BZ macro and listing them individually. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.6bc379f1b0b1.I204223f1b1c2fe26f414aea6679ef7fce681c33a@changeid
2022-11-10wifi: iwlwifi: mei: fix potential NULL-ptr deref after cloneJohannes Berg1-3/+7
If cloning the SKB fails, don't try to use it, but rather return as if we should pass it. Coverity CID: 1503456 Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.0ce03ba99601.I87960b7cb0a3d16b9fd8d9144027e7e2587f5a58@changeid
2022-11-10wifi: iwlwifi: mei: avoid blocking sap messages handling due to rtnl lockAvraham Stern1-20/+37
The AMT_STATE sap message handler tries to take the rtnl lock. This means that in case the rtnl lock is already taken, sap messages will not be processed. When an interface is brought up, the host requests ownership from csme. However, since the rtnl lock is already held, if there is a pending amt state message, the host will not be able to read the ownership confirm message because the amt state message handler is pending. As a result, the host fails to get ownership although csme granted it. Fix it by moving the part that needs the rtnl lock into a dedicated worker, so handling sap messages can continue. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.8599f2b4e9dd.I518f79e9099bf815c5f8d90235b4ce3250f59970@changeid
2022-11-10wifi: iwlwifi: mei: fix tx DHCP packet for devices with new Tx APIEmmanuel Grumbach1-1/+7
Devices with new Tx API have the IV introduced by the HW and it is not present in the skb at all. Hence we don't need to tell iwl_mvm_mei_tx_copy_to_csme to jump over 8 bytes to get to the ethernet header. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.12dc42133502.Idd744ffeeb84b880eb497963ee02563cbb959a42@changeid
2022-11-10wifi: iwlwifi: mei: don't send SAP commands if AMT is disabledEmmanuel Grumbach1-41/+44
We should not send any SAP command to CSME if AMT is disabled. Reported-by: Toke Høiland-Jørgensen <toke@toke.dk> Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.ea222d41c781.Ifc90ddc3e35187683ff7f59371d792b61c8854c8@changeid
2022-11-10wifi: iwlwifi: mei: make sure ownership confirmed message is sentAvraham Stern5-16/+29
It is possible that CSME will try to take ownership while the driver is stopping. In this case, if the CSME takes ownership message arrives after the driver started unregistering, the iwl_mei_cache->ops is already invalid, so the host will not answer with the ownership confirmed message. Similarly, if the take ownership message arrived after the mac was stopped or when iwl_mvm_up() failed, setting rfkill will not trigger sending the confirm message. As a result, CSME will not take ownership, which will result in a disconnection. Fix it by sending the ownership confirmed message immediately in such cases. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.b2a4c009e3e6.I7f931b7ee8b168e8ac88b11f23bff98b7ed3cb19@changeid
2022-11-10wifi: iwlwifi: mvm: send TKIP connection status to csmeAvraham Stern3-1/+8
Notify csme when associated with TKIP cipher. TKIP is supported by csme. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221030191011.cea63e4a355c.If6cdfa52529a79b923191c89dad7ed871d2ad2c6@changeid
2022-10-28Kalle Valo says:Jakub Kicinski1-0/+1
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 20:55:30 +0000