summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28wifi: iwlwifi: Track scan_cmd allocation size explicitlyKees Cook1-3/+3
In preparation for reducing the use of ksize(), explicitly track the size of scan_cmd allocations. This also allows for noticing if the scan size changes unexpectedly. Note that using ksize() was already incorrect here, in the sense that ksize() would not match the actual allocation size, which would trigger future run-time allocation bounds checking. (In other words, memset() may know how large scan_cmd was allocated for, but ksize() will return the upper bounds of the actually allocated memory, causing a run-time warning about an overflow.) Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Miri Korenblit <miriam.rachel.korenblit@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220923220853.3302056-1-keescook@chromium.org
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg1-2/+2
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: mvm: Consider P2P GO operation during scanIlan Peer1-3/+129
A scan during active P2P GO operation, i.e., data traffic with clients, can impact the throughput and latency of such traffic. Thus, when scan is requested while there is an active P2P GO and low latency is asserted: - Ask the FW scan logic to respect the P2P GO activity during the scheduling of the scan operation to minimize the impact on the throughput and latency. - Force scan to perform EBS before starting the scan to reduce the number of scanned channels. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220205112029.4412036f4889.Ied677fdd31765437e19905787708bd05f62663ba@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: Unify the scan iteration functionsIlan Peer1-42/+32
As there is not real need to iterate the active interfaces twice. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.940e45167283.I99ddfeda3d4a50d21cb18b826ccf84b21a76c487@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: remove unused macrosJohannes Berg1-1/+0
Found with W=2, remove unused macros in C files. In one case move the macro under the corresponding ifdef. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.068c6052689b.Idbb7a87c2fd93619c1765c7f4ed15190c3fef2a7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: Passively scan non PSC channels only when requested soIlan Peer1-10/+32
Non PSC channels should generally be scanned based on information about collocated APs obtained during scan on legacy bands, and otherwise should not be scanned unless specifically requested so (as there are relatively many non PSC channels, scanning them passively is time consuming and interferes with regular data traffic). Thus, modify the scan logic to avoid passively scanning PSC channels if there is no information about collocated APs and the scan is not a passive scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.457da4cc95eb.Ic98472bab5f5475f1e102547644caaae89ce4c4a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: scan: Modify return value of a functionIlan Peer1-5/+2
The function iwl_mvm_umac_scan_fill_6g_chan_list() always returns 0. Change its return value to 'void'. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.caef72dc255c.I186b787c7f190ca00c2800e1035f2503360f58a8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: Correctly set fragmented EBSIlan Peer1-1/+4
Currently, fragmented EBS was set for a channel only if the 'hb_type' was set to fragmented or balanced scan. However, 'hb_type' is set only in case of CDB, and thus fragmented EBS is never set for a channel for non-CDB devices. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: avoid void pointer arithmeticJohannes Berg1-1/+1
Avoid void pointer arithmetic since it's technically undefined and causes warnings in some places that use our code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.e349104ecd94.Iadc937f475158b9437becdfefb361a97e7eaa934@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: make iwl_fw_lookup_cmd_ver() take a cmd_idJohannes Berg1-15/+7
Instead of taking the group/command separately, make the function take a combined command ID. In many cases, this allows us to pass an existing command ID (e.g. cmd.id), or introduce a new variable for it, so that we don't use the command ID twice. This way, we can also use LONG_GROUP implicitly, so we don't need to spell that out for many commands. Apart from mvm.h, fw/img.{c,h} changes and some copyright and indentation updates, this was done with spatch: @@ identifier cmd; expression fw, G, C, def; @@ struct iwl_host_cmd cmd = { .id = WIDE_ID(G, C), ... }; ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier cmd; expression fw, C, def; @@ struct iwl_host_cmd cmd = { .id = C, ... }; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = WIDE_ID(G, C); ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = C; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ expression fw, C, def; @@ -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, C, def) @@ expression fw, C, G, def; @@ -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: prefer WIDE_ID() over iwl_cmd_id()Johannes Berg1-5/+4
The order of arguments for iwl_cmd_id() is confusing, and the version is always 0 and thus a useless argument. Prefer the WIDE_ID() macro (which needs to be a macro due to use in switch cases etc.) over the iwl_cmd_id() function. Obviously done with spatch: @@ expression G, C; @@ -iwl_cmd_id(C, G, 0) +WIDE_ID(G, C) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set schedule scan profilesAyala Beker1-1/+3
Set scan offload profiles auth algorithms with valid algorithms only. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.525f2d468d22.I4d497d6a0a14ffb833f7edc7e980d26bbf8d7527@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: perform 6GHz passive scan after suspendAvraham Stern1-12/+9
The 6GHz passive scan is performed only once every 50 minutes. However, in case of suspend/resume, the regulatory information is reset, so 6GHz channels may become disabled. Fix it by performing a 6GHz passive scan within 60 seconds after suspend/resume even if the 50 minutes timeout did not expire yet. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: e8fe3b41c3a3 ("iwlwifi: mvm: Add support for 6GHz passive scan") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set channel flagsAyala Beker1-3/+4
In case of forced passive scan on a UHB channel, don't set the direct probe option for this channel. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: add support for OCE scanAvraham Stern1-0/+6
In case the fw supports OCE scan and one of the OCE feature flags are set in the scan request, set the corresponding flag in the firmware scan request. Note that new firmware that indicates OCE support does not support the probe deferral and suppression feature (which is optional). Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.3dd63c381839.Id79b39f650103bb9b851e31ed6a0178e81988587@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: Increase the scan timeout guard to 30 secondsIlan Peer1-1/+1
With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: Add support for a new version of scan request commandIlan Peer1-18/+33
The scan request command is identical in binary format to the previous scan request command and the only change is now a previously reserved octet is used to indicate new flags introduced in the command. Align the code to support the new version and the previous one. Later patches would add the specific handling for the new flags. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.392a4af559bc.Ib8f1e3b527453531c10bfd7f4b116d3e257c7f1f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-28iwlwifi: mvm: Use all Rx chains for roaming scanIlan Peer1-0/+8
To improve chances of hearing beacons and probe responses during a scan which (based on the scan request parameters) looks like a roaming scan, enable reception on all chains. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f115ad455aca.I5de854fe8ce58c85c21a7adf43526acb29156a08@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: update definitions due to new rate & flagsMiri Korenblit1-1/+1
As a part of preparing to the new rate & flags version Update the relevant definitions and use them. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.5862bf4f14c4.Ib476b5443faa085539b79d49a0aebd81a213b42f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: Fix scan channel flags settingsIlan Peer1-1/+1
The iwl_mvm_scan_ch_n_aps_flag() is called with a variable before the value of the variable is set. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: Refactor setting of SSIDs for 6GHz scanIlan Peer1-76/+28
- Short SSIDs should always be added for direct SSIDs included in the scan request. However, this was not done in case that information for collocated APs was included. Fix this. - With the above fix, if the FW also supports discovery of hidden APs over the 6GHz band, also set the corresponding full SSID information. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210805130823.02512b7a1443.Ibb023b09b86179ed049a195f4e32e887c2f4971d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: Add support for hidden network scan on 6GHz bandIlan Peer1-15/+75
Add support for discovery of hidden networks on the 6GHz band, by including the scan request direct SSIDs in the FW scan request command: - In case a short SSID matches one of the direct SSIDs in the scan request command, add the matching SSID in the same offset in the 'direct_ssids' array. - Otherwise, add the SSID in one of the available slots. Additionally, as a preparation to handle hidden APs, refactor iwl_mvm_umac_scan_cfg_channels_v6_6g() the function. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.ffb540a70212.Ia2bb9bc9435b833820bcc7dc30adcedb5a5a9869@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: Do not use full SSIDs in 6GHz scanIlan Peer1-3/+6
The scan request processing populated the direct SSIDs in the FW scan request command also for 6GHz scan, which is not needed and might result in unexpected behavior. Fix the code to add the direct SSIDs only in case the scan is not a 6GHz scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: mvm: fix indentation in some scan functionsLuca Coelho1-7/+7
Two functions had indentation mistakes which were causing sparse warnings. Fix them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210612142637.12f3b9fea57e.I42a7556d43de78ec6387e3a699eca10482b0485d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: Add support for 6GHz passive scanIlan Peer1-0/+128
When doing scan while 6GHz channels are not enabled, the 6GHz band is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands (that will allow discovery of geographic location etc. that would allow enabling the 6GHz channels) but there are non collocated APs on 6GHz PSC channels these would never be discovered. To overcome this, FW added support for performing passive UHB scan in case no APs were discovered during scan on the 2GHz and 5GHz channels. Add support for enabling such scan when the following conditions are met: - 6GHz channels are supported but not enabled by regulatory. - Station interface is not associated or less than a defined time interval passed from the last resume or HW reset flows. - At least 4 channels are included in the scan request - The scan request includes the widlcard SSID. - At least 50 minutes passed from the last 6GHz passive scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: Support SCAN_CFG_CMD version 5Ilan Peer1-6/+8
Since the firmware support for internal station for auxiliary activities, there is no need to configure an auxiliary station as part of SCAN_CFG_CMD. Thus, this configuration was removed from the corresponding structure. Align the code accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.9b8da8408692.I7fe99d73cd67ffc817c2ef6af4c9932ce9fc50b2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: cancel the scan delayed work when scan is abortedEmmanuel Grumbach1-0/+3
When we abort the scan because of a firmware crash, we need to cancel the delayed work that monitors the scan completion. Otherwise it'll kick and try to restart the firmware yet another time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210205110447.a497faa942dd.Ibc155ad36da9de7eb0ddcdd826ddf8dd6607d2ac@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: scan: fix scheduled scan restart handlingJohannes Berg1-2/+7
When restarting firmware with an ongoing scheduled scan, we don't (and shouldn't) mark it as aborted as mac80211 will be restarting it, and so no event should go out to userspace. The appropriate comment regarding this wasn't moved to this place, so add it. However, we _do_ need to clean up our internal state, since mac80211 will restart the scan, and we'll otherwise get to the WARN_ON() a few lines below for no reason whatsoever. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.4ddc9b017268.Ie869b628ae56a5d776eba0e7b7f05f42fc566f2e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-11iwlwifi: mvm: Fix fall-through warnings for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly using the fallthrough pseudo-keyword as a replacement for a number of "fall through" markings. Notice that Clang doesn't recognize "fall through" comments as implicit fall-through. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201117135053.GA13248@embeddedor
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-64/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: clean up scan state on failureJohannes Berg1-11/+20
We keep the scan status per UID in scan_uid_status field when the iwl_mvm_build_scan_cmd() function is called. If we error out after this, e.g. due to FW restart being in progress, we're not cleaning up properly, and can run into warnings later. Clean up internal variables when starting fails after calling the iwl_mvm_build_scan_cmd() function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.970421a2f753.Id62b2da8a0ccccbb114407db82ca485d07749d39@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: follow the new inclusive terminologyEmmanuel Grumbach1-12/+12
The new inclusive terminology requires to change a few terms that were used in iwlwifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.1eb4c8625f36.I1b17b68d4a8e77071da3e15ffbd902d15c1d4938@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: add support for 6GHzLuca Coelho1-4/+292
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Co-developed-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Tova Mussai <tova.mussai@intel.com> Co-developed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Co-developed-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Signed-off-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12Nathan Errera1-3/+34
ADD_STA_CMD_API_S ver 12 was added in order to properly support auxiliary activities in CDB NICs. In the new version we don't need to allocate an aux station at initialization, instead we add an aux station only when an auxiliary activity that requires a dedicated Tx queue is needed. For now the only case we need this kind of activity is when using hot spot 2.0 Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.700e6e2e3077.Icdd807b6a3ad3fed806449ea0a13f856aa20e632@changeid
2020-10-01iwlwifi: mvm: ignore the scan duration parameterAvraham Stern1-45/+10
The scan request may specify the request scan dwell time. However, this value may not always be optimal (e.g. short dwell time for a passive channel). This may happen in a scan request as a result of beacon report request, in which the AP may request an active scan, thus setting a short dwell time, but the station will perform a passive scan due to regulatory. Ignore the scan duration parameter and always use the internal scan dwell time which should be optimal. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930191738.6e1d2b8b4489.I9584bb40d44bf31131f57fdd32d5e8848d4fbdd8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: clear all scan UIDsAyala Beker1-0/+9
In case of nic restart flow is called in the middle of scan abort flow, aborted scan UIDs might not be cleared. Fix it and clean these UIDs as well. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930191738.71aacc1a0358.Ie53f7ab07b42e6a5223f33e201b0f862ebda8986@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: fw: add default value for iwl_fw_lookup_cmd_verMordechay Goodstein1-2/+4
For new APIs this avoids checking every return if it's IWL_FW_CMD_VER_UNKNOWN (99) or it's lower than the new API value Done with spatch: -iwl_fw_lookup_cmd_ver(E1, E2, E3) +iwl_fw_lookup_cmd_ver(E1, E2, E3, IWL_FW_CMD_VER_UNKNOWN) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200928121852.70bec6eb8008.I6ea78553801d33f7ed10fcd2e4be4ba781fe469a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-04-24iwlwifi: move API version lookup to common codeMordechay Goodstein1-4/+4
The API version lookup is parsed from a TLV and should be in shared code make make it reusable across all opmodes. Also change the function names from mvm to fw, since this is not mvm-specific anymore. Additionally, since this function is not just a single line of code, it shouldn't be inline. Convert them to actual functions. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200421133326.cf94672dfcdb.I5ede9cc25ee8de7b8d2b5c574f917a18971da734@changeid
2020-04-24iwlwifi: scan: remove support for fw scan api v13Tova Mussai1-36/+0
The fw already supports scan api v14 and the firmware version that supports only v13 was not published, so we can remove support for v13 in the driver. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.11883315579a.I4f59100e457c1079c5e4c90e4930d1fa62b7ddd7@changeid
2020-03-27iwlwifi: scan: support FW APIs with variable number of profilesTova Mussai1-13/+27
The FW changed the maximum number of scan offload profiles to 8 in new APIs. Support it by changing the scan_offload_profile_cfg struct to be more dynamic, so we can reuse most of the code and only change size of the profiles array. Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6 Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: scan: support scan req cmd ver 14Shahar S Matityahu1-6/+123
Modify adaptive dwell number of APs override API Instead of using channel to index mapping, add the adaptive dwell override parameters as part of the configuration per channel in the scan request command. Support 2 different override values and use them as follows: 1. 10 APs for friendly GO channels in p2p scan. 2. 2 APs for social channels in p2p scan. Change-Id: I3b461108abf2306c3d054099112f2c3afce1cc92 Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-27Merge tag 'wireless-drivers-next-2020-01-26' of ↵David S. Miller1-47/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.6 Second set of patches for v5.6. Nothing special standing out, smaller new features and fixes allover. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device iwlwifi * support new versions of the FTM FW APIs * support new version of the beacon template FW API * print some extra information when the driver is loaded rtw88 * support wowlan feature for 8822c * add support for WIPHY_WOWLAN_NET_DETECT brcmfmac * add initial support for monitor mode qtnfmac * add module parameter to enable DFS offloading in firmware * add support for STA HE rates * add support for TWT responder and spatial reuse ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30Revert "iwlwifi: mvm: fix scan config command size"Mehmet Akif Tasova1-1/+1
Since v5.4-rc1 was released, iwlwifi started throwing errors when scan commands were sent to the firmware with certain devices (depending on the OTP burned in the device, which contains the list of available channels). For instance: iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD This bug was reported in the ArchLinux bug tracker: https://bugs.archlinux.org/task/64703 And also in a specific case in bugzilla, when the lar_disabled option was set: https://bugzilla.kernel.org/show_bug.cgi?id=205193 Revert the commit that introduced this error, by using the number of channels from the OTP instead of the number of channels that is specified in the FW TLV that tells us how many channels it supports. This reverts commit 06eb547c4ae4382e70d556ba213d13c95ca1801b. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Mehmet Akif Tasova <makiftasova@gmail.com> [ Luca: reworded the commit message a bit. ] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-20iwlwifi: scan: remove support for fw scan api v11Tova Mussai1-47/+0
The fw already support scan api v12, v11 is not needed anymore. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: scan: support scan req FW API ver 13Tova Mussai1-3/+51
1. Modify channel config flags to be used for legacy bands channels as well, to indicate SSIDs elements from ssidIEsArray. 2. Add new general flag. 3. Remove ssidNum from probe params. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu1-4/+2
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu1-0/+180
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu1-98/+150
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai1-6/+196
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai1-15/+17
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-04 01:19:19 +0000