summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-10wifi: iwlwifi: mvm: Fix getting the lowest rateIlan Peer1-2/+2
When setting the rate for Tx, the code tried to get the lowest allowed rate but without considering the BSS basic rates. Fix this by considering the basic rates. In addition, declare support for configuring beacon Tx rate and when configured use the configured Tx beacon rate to set beacon tx command rate. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.be8403f0d5c0.I7d141646746b96310efd75fc77ca9aebc61aefcc@changeid
2022-09-06wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg1-6/+8
The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz1-1/+1
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski1-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01iwlwifi: mvm: check debugfs_dir ptr before useRandy Dunlap1-3/+8
When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. Fixes: 8c082a99edb9 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org [change to make both conditional] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: debugfs: remove useless double conditionJohannes Berg1-2/+1
There's no point spelling out the same condition twice, so remove the second one. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.321a7e67209b.Iafb75006eab971ca6982d6efd76347d3f47bd023@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: avoid void pointer arithmeticJohannes Berg1-1/+1
Avoid void pointer arithmetic since it's technically undefined and causes warnings in some places that use our code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.e349104ecd94.Iadc937f475158b9437becdfefb361a97e7eaa934@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: prefer WIDE_ID() over iwl_cmd_id()Johannes Berg1-7/+6
The order of arguments for iwl_cmd_id() is confusing, and the version is always 0 and thus a useless argument. Prefer the WIDE_ID() macro (which needs to be a macro due to use in switch cases etc.) over the iwl_cmd_id() function. Obviously done with spatch: @@ expression G, C; @@ -iwl_cmd_id(C, G, 0) +WIDE_ID(G, C) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-03iwlwifi: remove deprecated broadcast filtering featureLuca Coelho1-203/+0
This feature has been deprecated and should not be used anymore. With newer firmwares, namely *-67.ucode and above, trying to use it causes an assertion failure in the FW, similar to this: [Tue Jan 11 20:05:24 2022] iwlwifi 0000:04:00.0: 0x00001062 | ADVANCED_SYSASSERT In order to prevent this feature from being used, remove it entirely and get rid of the Kconfig option that enables it (IWLWIFI_BCAST_FILTERING). Fixes: cbaa6aeedee5 ("iwlwifi: bump FW API to 67 for AX devices") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215488 Cc: stable@vger.kernel.org # 5.16.x Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128144623.9241e049f13e.Ia4f282813ca2ddd24c13427823519113f2bbebf2@changeid
2021-12-20iwlwifi: mvm: add dbg_time_point to debugfsJohannes Berg1-0/+1
We forgot to link this to debugfs, so the code is all dead. Add it for real. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20211219110000.d0f314101410.I7357c01179c35621686265d4da4a64d2333a5f1a@changeid
2021-12-07iwlwifi: mvm: optionally suppress assert logJohannes Berg1-0/+8
Normally, when we hit an assert, we print out all the assert data. However, in certain tests, when we trigger it from debugfs intentionally, that can be useless and confusing. Allow writing the string "nolog\n" to the fw_nmi and fw_restart files suppressing the assert dump as well as - in the case of fw_restart - the iwlwifi 0000:00:00.0: FW error in SYNC CMD REPLY_ERROR message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204174546.75e29a2ab68d.Id3064feda2ce7a77c116c6d6e71ce5ff447c6e86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new version of BEACON_TEMPLATE_CMD.Miri Korenblit1-6/+2
As part of the new rate_n_flags, a new version of BEACON_TEMPLATE_CMD was added in FW in order to support the new rate_n_flags. Add support for the new version. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Add support for new rate_n_flags in tx_cmd.Miri Korenblit1-1/+1
As part of the new rate_n_flags, tx_cmd API has changed. Add support for these changes. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.26efa51624b1.Ic96ae4d81b3ff07fb514df2b5f6a8e470e4d3778@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support version 3 of tlc_update_notif.Miri Korenblit1-2/+2
As part of the new rate_n_flags, a new version of tlc_update_notif was added in FW in order to support the new rate_n_flags. Add support for the new version, and move the all API to use the new rate_n_flags only (if FW supports the old one - convert it). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Remove antenna c referencesMiri Korenblit1-5/+2
Since antenna c is not in use and won't be relevant after the new rate & flags, remove all it's references Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.5e39106ec75b.I4281edc844f734bf9591396a5cc8009ad37ccda8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: convert flat GEO profile table to a struct versionLuca Coelho1-5/+6
The GEO profiles have been stored in single-dimension arrays and the access has been done via a single index. We will soon need to support different revisions of this table, which will make the flat array even harder to handle. To prepare for that, convert the single-dimension array to a struct with substructures. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.56f3506411a2.I600ed3708d19f2263a5a8d143f6711d08499bbb0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: mvm: Call NMI instead of REPLY_ERRORHarish Mitty1-1/+3
For IWL_DEVICE_FAMILY_22000 & greater, driver will call NMI instead of REPLY_ERROR as FW->Infra does not support this command for this family onwards. Signed-off-by: Harish Mitty <harish.mitty@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210617100544.597f4246c79d.Ia0a1bbc2e66b4e849174db685208fc2b8bd5732e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't lock mutex in RCU critical sectionJohannes Berg1-6/+4
We cannot lock a mutex while we're in an RCU critical section. At the same time, we're accessing data structures that are protected by the mvm->mutex anyway, so just move the entire locking here to use only that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.4d27bd36e10e.I1fd8e8fe442c41a5deaa560452b598ed7a60ada5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-06iwlwifi: mvm: rfi: don't lock mvm->mutex when sending config commandGregory Greenman1-2/+5
The mutex is already locked in iwl_mvm_mac_start. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Fixes: 21254908cbe9 ("iwlwifi: mvm: add RFI-M support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.703288ea058d.I82a0312389032d07c3b478bef3e938e06bfa7df6@changeid
2021-02-11iwlwifi: mvm: simplify iwl_mvm_dbgfs_registerEmmanuel Grumbach1-13/+12
No need to pass the dbgfs_dir just to assign it to mvm. Assign to mvm and then call iwl_mvm_dbgfs_register. This is a preparation towards the addition of a delayed op_mode_start flow. This will allow to split the op_mode_start flow. Registration to debugfs must happen after we register to mac80211 and the registration to mac80211 will soon be delayed in certain cases. In order not to have to remember the debugfs_dir in a separate variable, just set it into the mvm structure so that it can be usable later. Declare mvm->debugfs_dir in the iwl_mvm structure even when IWLWIFI_DEBUGFS isn't enabled to simplify the source code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.a92ee491863d.I047923aa3598fbf4fb6fce2cdff75a4969fedd76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: mvm: add RFI-M supportGregory Greenman1-0/+65
RF Interference Mitigation is a new feature targeted to handle the problem of interference between DDR memory and WiFi. The role of the driver is to configure FW with the table holding a mapping between problematic channels/bands and the corresponding frequencies. This patch adds RFI infrastructure and adds two debugfs hooks: - send RFI configuration command (currently with a default table) which will reset feature in the FW - read the table, used by the FW (which can be a subset of the table that driver sent). Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.2cea55a09bc7.I634b79795abad499ce442631d6672ffef8fc6d41@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: add debugfs entry to trigger a dump as any time-pointMordechay Goodstein1-0/+19
This is used for different tests collecting different types of debug data from fw (e.g latency issues, hw issues etc). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210131201908.0db829694810.I001f39d34ae46c87870d9bd94a4baaa3250578d1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: debugfs: check length precisely in inject_packetJohannes Berg1-2/+2
When we check the length, we only check that the advertised data length fits into the data we have, but currently not that it actually matches correctly. This should be harmless, but if the first two bytes are zero, then the iwl_rx_packet_payload_len() ends up negative, and that might later cause issues if unsigned variables are used, as this is not something that's normally expected. Change the validation here to precisely validate the lengths match, to avoid such issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117164916.5184dfc2a445.I0631d2e4f6ffb93cf06618edb035c45bd6d1d7b9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: debugfs for phy-integration-verDror Moshe1-0/+28
Add debugfs file to print the PHY integration version. File name is: phy_integration_ver Signed-off-by: Dror Moshe <drorx.moshe@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117164916.f5127d919656.Ib714f444390b39cbbf7eb143c5440cc890385981@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: add support for new flush queue responseMordechay Goodstein1-2/+2
In the new api all the flush in the FW is done before we get the response and in the response we only get the updated read pointer and all queued packets don't get anymore rx_tx per packet to free the queued packet, so driver needs to free all queued packets on flushed queue at once after flush response. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.4bd0eca8c0ef.I1601aad2eb2cc83f6f73b8ca52be57bb9fd626ab@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: remove debugfs injection limitationsJohannes Berg1-19/+7
For testing features where the firmware may send some notifications it can often be a lot easier to do that from a test script. Remove most injection limitations from debugfs to be able to do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.9aff3c6b4607.I03b0ae7df094734451445ffcb7f9f0274969f1c0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-61/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: fix sar profile printing issueJanie Tu1-2/+2
The profile shows an invalid value because the wrong format was used. A u8 value should use by %hhu, not %hhd. Fix thisit by changing it to %hhu. Signed-off-by: Janie Tu <janiex.tu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a595be52af22.I1843c3c4f9fb32fa8d439052bd0a5ad230f292e2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: mvm: get number of stations from TLVNathan Errera1-2/+2
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
2020-05-08iwlwifi: avoid debug max amsdu config overwriting itselfMordechay Goodstein1-4/+7
If we set amsdu_len one after another the second one overwrites the orig_amsdu_len so allow only moving from debug to non debug state. Also the TLC update check was wrong: it was checking that also the orig is smaller then the new updated size, which is not the case in debug amsdu mode. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid
2020-03-27iwlwifi: mvm: remove newline from rs_pretty_print_rate()Johannes Berg1-0/+4
Some of the places using this want the newline, but not all, so remove the newline from it and generate it in the debugfs files where it's desired. The effect of this is not printing double newlines in debug log messages. Change-Id: Ia59b0abbef16b6783fcabc095c5fde16bd047a26 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-04iwlwifi: add device name to device_infoLuca Coelho1-1/+1
We have a lot of mostly duplicated data structures that are repeated only because the device name string is different. To avoid this, move the string from the cfg to the trans structure and add it independently from the rest of the configuration to the PCI mapping tables. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg1-1/+1
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss1-1/+2
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika1-1/+1
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: dbg_ini: add user trigger supportShahar S Matityahu1-0/+3
Allow to fire user trigger in ini mode Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add a pointer to the trans_cfg directly in transLuca Coelho1-2/+2
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho1-3/+3
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: LTR updatesAlex Malamud1-0/+37
New FW versions introduces LTR feature enablement by default. For such FW versions, driver (mvm/xvt) should not send host command to enable LTR feature, also it should be possible to override LTR configuration through the debugfs. 1. Send LTR feature enablement command only for FW versions which does not advertises SET_LTR_GEN2 capability. 2. Implement ltr_config file in debugfs for LTR configuration override. Signed-off-by: Alex Malamud <alex.malamud@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach1-111/+0
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: remove multiple debugfs entriesMordechay Goodstein1-20/+0
Now that we have per station control over amsdu size no need for multiple entries, especially that the old one is misleading due to not setting it for all protocols as a limit. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packetsMordechay Goodstein1-1/+45
The current debugfs entry only limits the max AMSDU for TCP. Add a new debugfs entry to allow setting a fixed AMSDU size for all TX packets, including UDP and ICMP Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: mvm: remove d3_sram debugfs fileJohannes Berg1-57/+0
This debugfs file is really old, and cannot work properly since the unified image support. Rather than trying to make it work, which is difficult now due to multiple images (LMAC/UMAC etc.) just remove it - we no longer need it since we properly do a FW coredump even in D3 cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03iwlwifi: mvm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-59/+30
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: dbg_ini: separate between ini and legacy dump flowsShahar S Matityahu1-1/+1
Separate between ini and legacy dump flows to allow adding ini triggers that are not supported in the legacy flow and to increase readabilty. iwl_fw_dbg_ini_collect function is now called with legacy trigger id and _iwl_fw_dbg_ini_collect is called with ini trigger id. Also make the actual dumping function static so that any dump collection will go through iwl_fw_dbg_collect_sync. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: add read debugfs for he_sniffer_paramsLiad Kaufman1-2/+23
Return the AID currently set when reading this debugfs entry. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: reject new beacons when in inject modeSara Sharon1-2/+5
Verify we do not accept new beacon templates while beacon injection is active. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support beacon IE injectionSara Sharon1-0/+106
This is useful for automated tests. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: include configured sniffer AID in radiotapJohannes Berg1-1/+43
In order to make more sense out of the captured radiotap data e.g. when the configured AID changes, add the currently configured AID to the radiotap data as a vendor extension field. This is made race-free by updating the included value from inside the RX path (using a notification wait) for the command response from the firmware, which thus means it's serialized with frame RX. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: implement CSI reportingJohannes Berg1-0/+1
Implement CSI (channel estimation matrix) reporting in the mvm driver, if the firmware has the capability. Currently only a debugfs API is provided as the API is still under discussion. For now, RX aggregation must be disabled to use this feature on data frames as we haven't found a good way to attach the data to A-MPDUs, given complexities with multi-queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-28 14:24:00 +0000