summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/sbtsi_temp.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-04hwmon: use simple i2c probeStephen Kitt1-3/+2
All these drivers have an i2c probe function which doesn't use the "struct i2c_device_id *id" parameter, so they can trivially be converted to the "probe_new" style of probe with a single argument. This is part of an ongoing transition to single-argument i2c probe functions. Old-style probe functions involve a call to i2c_match_id: in drivers/i2c/i2c-core-base.c, /* * When there are no more users of probe(), * rename probe_new to probe. */ if (driver->probe_new) status = driver->probe_new(client); else if (driver->probe) status = driver->probe(client, i2c_match_id(driver->id_table, client)); else status = -EINVAL; Drivers which don't need the second parameter can be declared using probe_new instead, avoiding the call to i2c_match_id. Drivers which do can still be converted to probe_new-style, calling i2c_match_id themselves (as is done currently for of_match_id). This change was done using the following Coccinelle script, and fixed up for whitespace changes: @ rule1 @ identifier fn; identifier client, id; @@ - static int fn(struct i2c_client *client, const struct i2c_device_id *id) + static int fn(struct i2c_client *client) { ...when != id } @ rule2 depends on rule1 @ identifier rule1.fn; identifier driver; @@ struct i2c_driver driver = { - .probe + .probe_new = ( fn | - &fn + fn ) , }; Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20221011143309.3141267-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-12hwmon: (sbtsi) Add basic support for SB-TSI sensorsKun Yi1-0/+250
SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible interface that reports AMD SoC's Ttcl (normalized temperature), and resembles a typical 8-pin remote temperature sensor's I2C interface to BMC. This commit adds basic support using this interface to read CPU temperature, and read/write high/low CPU temp thresholds. To instantiate this driver on an AMD CPU with SB-TSI support, the i2c bus number would be the bus connected from the board management controller (BMC) to the CPU. The i2c address is specified in Section 6.3.1 of the spec [1]: The SB-TSI address is normally 98h for socket 0 and 90h for socket 1, but it could vary based on hardware address select pins. [1]: https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf Test status: tested reading temp1_input, and reading/writing temp1_max/min. Signed-off-by: Kun Yi <kunyi@google.com> Link: https://lore.kernel.org/r/20201211215427.3281681-2-kunyi@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>