summaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas/r8a7796-cpg-mssr.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-13clk: renesas: Move RPC core clocksGeert Uytterhoeven1-5/+4
The RPC and RPCD2 core clocks were added to the sections for internal core clocks, while they are core clock outputs, visible from DT. Move them to the correct sections. Rename the ".rpc" clock on R-Car S4 to "rpc". Fixup nearby whitespace to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a938b938f00939b9206d7fbaba78e2ef09915f5f.1649681891.git.geert+renesas@glider.be
2021-11-19clk: renesas: rcar-gen3: Add SDnH clockWolfram Sang1-4/+8
Currently a pass-through clock but we will make it a real divider clock in the next patches. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-15clk: renesas: r8a779[56]x: Add MLP clocksAndrey Gusakov1-0/+1
Add clocks for MLP modules on Renesas R-Car H3 and M3-W/N SoCs. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20210929213431.5275-1-nikita.yoush@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-28clk: renesas: r8a7796: Add TMU clocksNiklas Söderlund1-0/+5
This patch adds TMU{0,1,2,3,4} clocks. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201209195343.803120-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22clk: renesas: rcar-gen3: Mark RWDT clocks as criticalUlrich Hecht1-1/+1
Ensures RWDT remains alert throughout the boot process if enabled. This patch applies the change to the following SoCs: r8a77950, r8a77951, r8a77960, r8a77961, r8a77965, r8a77970, r8a77980, r8a77990 and r8a77995. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-10clk: renesas: r8a7796: Add RPC clocksDirk Behme1-0/+8
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car M3-W/M3-W+ (R8A7796) CPG/MSSR driver. Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks"). Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20200203072901.31548-2-dirk.behme@de.bosch.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-10clk: renesas: rcar-gen3: Add CCREE clocksGeert Uytterhoeven1-0/+2
Add the CryptoCell module clocks and their parents for the CryptoCell instances in the various Renesas R-Car Gen3 SoCs that do not have support for them yet in their clock drivers (M3-W/W+, M3-N, E3, D3). The R-Car H3 clock driver already supports these clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200124133137.15921-1-geert+renesas@glider.be
2019-11-01clk: renesas: r8a7796: Add R8A77961 CPG/MSSR supportGeert Uytterhoeven1-4/+20
Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock Pulse Generator / Module Standby and Software Reset driver. R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for both SoCs to share a driver. R-Car M3-W+ lacks a few modules, so their clocks must be nullified. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122941.12342-5-geert+renesas@glider.be
2019-05-21clk: renesas: r8a7796: Add CMM clocksJacopo Mondi1-0/+3
Add clock definitions for CMM units on Renesas R-Car Gen3 M3-W. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-21clk: renesas: r8a779{5|6|65}: Add TPU clockCao Van Dong1-0/+1
This patch adds the TPU clock on the R-Car r8a7795/r8a7796/r8a77965 SoCs. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Rename DRIF clocksTakeshi Kihara1-8/+8
According to the R-Car Gen3 Hardware Manual Errata for Rev. 1.50 of Feb 12, 2019, the DRIF clocks have been renamed as follows: DRIF0 to DRIF00 DRIF1 to DRIF01 DRIF2 to DRIF10 DRIF3 to DRIF11 DRIF4 to DRIF20 DRIF5 to DRIF21 DRIF6 to DRIF30 DRIF7 to DRIF31 Therefore, this patch renames the DRIF clocks from DRIFn to DRIFmm. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of Audio-DMACTakeshi Kihara1-2/+2
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of SYS-DMACTakeshi Kihara1-2/+2
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of HS-USBKazuya Mizuguchi1-1/+1
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the HS-USB module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCIKazuya Mizuguchi1-2/+2
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2Simon Horman1-1/+1
After recent reworking of Z and Z2 clk handling CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely the same meaning. Remove this redundancy by eliminating the latter. This is not expected to have any run-time effect. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offsetSimon Horman1-2/+2
Parameterise the offset of control bits within the FRQCRC register for Z and Z2 clocks. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which uses a different offset for control bits to other, already, supported SoCs. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisorTakeshi Kihara1-2/+3
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed divisor other than 2, the value used by all such clocks supported to date. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which has a fixed divisor of 4. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: squashed several patches; rewrote changelog; added r8a774a1 change] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-04clk: renesas: r8a7796: Add CPEX clockGeert Uytterhoeven1-0/+1
Implement support for the CPEX clock on R-Car M3-W. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branch 'clk-renesas' into clk-nextStephen Boyd1-33/+34
* clk-renesas: (36 commits) clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks clk: renesas: r8a77990: Add missing I2C7 clock ...
2018-08-30clk: renesas: use SPDX identifier for Renesas driversWolfram Sang1-4/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-27clk: renesas: r8a7796: Add OSC EXTAL predivider configurationGeert Uytterhoeven1-33/+33
R-Car Gen3 Hardware Manual Rev.0.52 documents the relation between the MD13 and MD14 mode pins, and the OSC EXTAL predivider, as used by the OSC and RINT RCLK clocks. Hence augment the configuration structure with all documented predivider values. According to R-Car Gen3 Hardware Manual Rev.0.53, the CPG_RCKCR register was removed in R-Car M3-W ES1.1. Change the OSC and RINT clock definitions to use the OSC EXTAL predivider instead, which is supported on all R-Car M3-W SoC revisions. Inspired by a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27clk: renesas: rcar-gen3: Rename rint to .rGeert Uytterhoeven1-1/+2
All other internal clock names have a period prepended. Hence rename the internal RCLK from "rint" to ".r", and move it to the section where all other internal clocks are defined. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12clk: renesas: r8a7796: Add Z2 clockTakeshi Kihara1-0/+1
This patch adds Z2 clock for R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12clk: renesas: r8a7796: Add Z clockTakeshi Kihara1-0/+1
This patch adds Z clock for R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-01-05clk: renesas: r8a7796: Add FDP clockABE Hiroshige1-0/+1
This patch adds FDP1-0 clock to the R8A7796 SoC. Signed-off-by: ABE Hiroshige <hiroshige.abe.zc@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: s/fdp0/fdp1-0/] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-10-16clk: renesas: r8a7796: Correct parent clock of INTC-APGeert Uytterhoeven1-1/+1
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.55 of September 8, 2017, the parent clock of the INTC-AP module clock on R-Car M3-W is S0D3. This change has no functional impact. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-17clk: renesas: r8a7796: Add USB3.0 clockHiromitsu Yamasaki1-0/+1
This patch adds USB3.0-IF0 clock for R8A7796 SoC. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3Geert Uytterhoeven1-17/+17
On some R-Car Gen3 SoCs (e.g. R-Car D3), PLL1 and PLL3 use a divider value different from one. Extend struct rcar_gen3_cpg_pll_config to handle this. As all multipliers and dividers are small, table size increase can be kept limited by storing them in u8s instead of unsigned ints, which saves ca. 0.5 KiB for a generic kernel. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-05-15clk: renesas: r8a7796: Add INTC-EX clockTakeshi Kihara1-0/+1
Add the "intc-ex" clock to the R8A7796 CPG MSSR driver. According to information from the hardware team the INTC-EX parent clock is CP. The next data sheet version will include this information. [takeshi.kihara.df: Ported from commit f099aa075749 ("clk: shmobile: r8a7795: Add INTC-EX clock") to drivers/clk/renesas/r8a7796-cpg-mssr.c] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add PCIe clocksHarunobu Kurokawa1-0/+2
This patch adds PCIEC{0,1} clocks for R8A7796 SoC. Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add PWM clockRyo Kodama1-0/+1
This patch adds PWM clock for PWM. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [geert: Correct parent clock] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add HS-USB clockKazuya Mizuguchi1-0/+1
This patch adds HS-USB-IF clock for R8A7796 SoC. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add Sound DVC clocksKazuya Mizuguchi1-0/+2
This patch adds adds SCU(DVC{0,1}) clocks for R8A7796 SoC. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add Sound SRC clockKazuya Mizuguchi1-0/+13
This patch adds SCU(all), SCU(SRC{0,1,2,3,4,5,6,7,8,9}), SCU(CTU00, CTU01, CTU02, CTU03, MIX0) and SCU (CTU10, CTU11, CTU12, CTU13, MIX1) clocks for R8A7796 SoC. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add Sound SSI clockKazuya Mizuguchi1-0/+11
This patch adds SSI(all) and SSI{0,1,2,3,4,5,6,7,8,9} clocks for R8A7796 SoC. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add USB-DMAC clocksHiromitsu Yamasaki1-0/+2
This patch adds USB-DMAC{0,1} clocks for R8A7796 SoC. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add Audio-DMAC clocksHiromitsu Yamasaki1-0/+2
This patch adds A-DMAC{0,1} clocks for R8A7796 SoC. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [geert: Correct parent clocks, preserve sort order] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add EHCI/OHCI clocksKazuya Mizuguchi1-0/+2
This patch adds EHCI/OHCI{0,1} clocks for R8A7796 SoC. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-15clk: renesas: r8a7796: Add HDMI clockKoji Matsuoka1-0/+2
This patch adds HDMI-IF0 clock for R8A7796 SoC. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-03-21clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()Geert Uytterhoeven1-1/+1
Pass the mode pin states from the SoC-specific CPG/MSSR driver to the R-Car Gen3 CPG driver core, as their state will be needed to make some core clock configuration decisions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-03-21clk: renesas: r8a7796: Reformat core clock tableGeert Uytterhoeven1-6/+6
For easier comparison with other clock drivers. No functional changes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-03-21clk: renesas: r8a7796: Correct name of watchdog clockGeert Uytterhoeven1-1/+1
There's only a single watchdog clock, and it's named "rwdt". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-03-06clk: renesas: r8a7796: Add IMR clocksSergei Shtylyov1-0/+2
Add the IMR[0-1] clocks to the R8A7796 CPG/MSSR driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: Correct parent clocks] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-27clk: renesas: r8a7796: Add IIC-DVFS clockKhiem Nguyen1-0/+1
This patch adds DVFS clock for R8A7796 SoC. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com> Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-27clk: renesas: r8a7796: Add MSIOF controller clocksHiromitsu Yamasaki1-0/+5
This patch adds MSIOF{0,1,2,3} clocks for R8A7796 SoC. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-27clk: renesas: r8a7796: Add CAN FD peripheral clockChris Paterson1-0/+1
Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-27clk: renesas: r8a7796: Add CANFD clockChris Paterson1-0/+1
Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-12-27clk: renesas: r8a7796: Add CAN peripheral clockChris Paterson1-0/+2
Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-11-07clk: renesas: r8a7796: Add VIN clocksNiklas Söderlund1-0/+8
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-30 14:37:27 +0000