summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorKhalil Blaiech <kblaiech@nvidia.com>2020-11-03 14:54:40 -0500
committerWolfram Sang <wsa@kernel.org>2020-11-06 15:51:57 +0100
commit4b19d806ac5272bb9f64d78ca6832867870eb45d (patch)
tree237f17e1b9630fffbb2ffb65efce47289defa447 /drivers
parent08e019e27a9ed0d6c410176cab4e029e3d233cb8 (diff)
downloadlinux-4b19d806ac5272bb9f64d78ca6832867870eb45d.tar.bz2
i2c: mlxbf: Remove unecessary wrapper functions
Few wrapper functions are useless and can be inlined. So delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace them with readl() and writel(), respectively. Also delete mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace them with ioread32be() and iowrite32be(), respectively. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/i2c-mlxbf.c183
1 files changed, 72 insertions, 111 deletions
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index 4bd80b1b6a29..fca8a3bddcb1 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -489,44 +489,6 @@ static struct mutex mlxbf_i2c_bus_lock;
#define MLXBF_I2C_FREQUENCY_1GHZ 1000000000
-static void mlxbf_i2c_write(void __iomem *io, int reg, u32 val)
-{
- writel(val, io + reg);
-}
-
-static u32 mlxbf_i2c_read(void __iomem *io, int reg)
-{
- return readl(io + reg);
-}
-
-/*
- * This function is used to read data from Master GW Data Descriptor.
- * Data bytes in the Master GW Data Descriptor are shifted left so the
- * data starts at the MSB of the descriptor registers as set by the
- * underlying hardware. TYU_READ_DATA enables byte swapping while
- * reading data bytes, and MUST be called by the SMBus read routines
- * to copy data from the 32 * 32-bit HW Data registers a.k.a Master GW
- * Data Descriptor.
- */
-static u32 mlxbf_i2c_read_data(void __iomem *io, int reg)
-{
- return ioread32be(io + reg);
-}
-
-/*
- * This function is used to write data to the Master GW Data Descriptor.
- * Data copied to the Master GW Data Descriptor MUST be shifted left so
- * the data starts at the MSB of the descriptor registers as required by
- * the underlying hardware. TYU_WRITE_DATA enables byte swapping when
- * writing data bytes, and MUST be called by the SMBus write routines to
- * copy data to the 32 * 32-bit HW Data registers a.k.a Master GW Data
- * Descriptor.
- */
-static void mlxbf_i2c_write_data(void __iomem *io, int reg, u32 val)
-{
- iowrite32be(val, io + reg);
-}
-
/*
* Function to poll a set of bits at a specific address; it checks whether
* the bits are equal to zero when eq_zero is set to 'true', and not equal
@@ -541,7 +503,7 @@ static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask,
timeout = (timeout / MLXBF_I2C_POLL_FREQ_IN_USEC) + 1;
do {
- bits = mlxbf_i2c_read(io, addr) & mask;
+ bits = readl(io + addr) & mask;
if (eq_zero ? bits == 0 : bits != 0)
return eq_zero ? 1 : bits;
udelay(MLXBF_I2C_POLL_FREQ_IN_USEC);
@@ -609,16 +571,16 @@ static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
MLXBF_I2C_SMBUS_TIMEOUT);
/* Read cause status bits. */
- cause_status_bits = mlxbf_i2c_read(priv->mst_cause->io,
- MLXBF_I2C_CAUSE_ARBITER);
+ cause_status_bits = readl(priv->mst_cause->io +
+ MLXBF_I2C_CAUSE_ARBITER);
cause_status_bits &= MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK;
/*
* Parse both Cause and Master GW bits, then return transaction status.
*/
- master_status_bits = mlxbf_i2c_read(priv->smbus->io,
- MLXBF_I2C_SMBUS_MASTER_STATUS);
+ master_status_bits = readl(priv->smbus->io +
+ MLXBF_I2C_SMBUS_MASTER_STATUS);
master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK;
if (mlxbf_i2c_smbus_transaction_success(master_status_bits,
@@ -649,10 +611,17 @@ static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
aligned_length = round_up(length, 4);
- /* Copy data bytes from 4-byte aligned source buffer. */
+ /*
+ * Copy data bytes from 4-byte aligned source buffer.
+ * Data copied to the Master GW Data Descriptor MUST be shifted
+ * left so the data starts at the MSB of the descriptor registers
+ * as required by the underlying hardware. Enable byte swapping
+ * when writing data bytes to the 32 * 32-bit HW Data registers
+ * a.k.a Master GW Data Descriptor.
+ */
for (offset = 0; offset < aligned_length; offset += sizeof(u32)) {
data32 = *((u32 *)(data + offset));
- mlxbf_i2c_write_data(priv->smbus->io, addr + offset, data32);
+ iowrite32be(data32, priv->smbus->io + addr + offset);
}
}
@@ -664,15 +633,23 @@ static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
mask = sizeof(u32) - 1;
+ /*
+ * Data bytes in the Master GW Data Descriptor are shifted left
+ * so the data starts at the MSB of the descriptor registers as
+ * set by the underlying hardware. Enable byte swapping while
+ * reading data bytes from the 32 * 32-bit HW Data registers
+ * a.k.a Master GW Data Descriptor.
+ */
+
for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) {
- data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+ data32 = ioread32be(priv->smbus->io + addr + offset);
*((u32 *)(data + offset)) = data32;
}
if (!(length & mask))
return;
- data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+ data32 = ioread32be(priv->smbus->io + addr + offset);
for (byte = 0; byte < (length & mask); byte++) {
data[offset + byte] = data32 & GENMASK(7, 0);
@@ -698,16 +675,16 @@ static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT);
/* Clear status bits. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_STATUS, 0x0);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_STATUS);
/* Set the cause data. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+ writel(~0x0, priv->smbus->io + MLXBF_I2C_CAUSE_OR_CLEAR);
/* Zero PEC byte. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_PEC, 0x0);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_PEC);
/* Zero byte count. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_RS_BYTES, 0x0);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_RS_BYTES);
/* GW activation. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW, command);
+ writel(command, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_GW);
/*
* Poll master status and check status bits. An ACK is sent when
@@ -823,8 +800,8 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
* needs to be 'manually' reset. This should be removed in
* next tag integration.
*/
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_FSM,
- MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK);
+ writel(MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK,
+ priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_FSM);
}
return ret;
@@ -1113,8 +1090,8 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
timer |= mlxbf_i2c_set_timer(priv, timings->scl_low,
false, MLXBF_I2C_MASK_16,
MLXBF_I2C_SHIFT_16);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH,
- timer);
+ writel(timer, priv->smbus->io +
+ MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH);
timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false,
MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_0);
@@ -1124,37 +1101,34 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16);
timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false,
MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE,
- timer);
+ writel(timer, priv->smbus->io +
+ MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE);
timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_THOLD, timer);
+ writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_THOLD);
timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- mlxbf_i2c_write(priv->smbus->io,
- MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP, timer);
+ writel(timer, priv->smbus->io +
+ MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP);
timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA,
- timer);
+ writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA);
timer = mlxbf_i2c_set_timer(priv, timings->buf, false,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_THIGH_MAX_TBUF,
- timer);
+ writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF);
timer = timings->timeout;
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT,
- timer);
+ writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT);
}
enum mlxbf_i2c_timings_config {
@@ -1426,19 +1400,15 @@ static int mlxbf_i2c_init_master(struct platform_device *pdev,
* platform firmware; disabling the bus might compromise the system
* functionality.
*/
- config_reg = mlxbf_i2c_read(gpio_res->io,
- MLXBF_I2C_GPIO_0_FUNC_EN_0);
+ config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0);
config_reg = MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(priv->bus,
config_reg);
- mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FUNC_EN_0,
- config_reg);
+ writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0);
- config_reg = mlxbf_i2c_read(gpio_res->io,
- MLXBF_I2C_GPIO_0_FORCE_OE_EN);
+ config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN);
config_reg = MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(priv->bus,
config_reg);
- mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FORCE_OE_EN,
- config_reg);
+ writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN);
mutex_unlock(gpio_res->lock);
@@ -1454,8 +1424,7 @@ static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res)
pad_frequency = MLXBF_I2C_TYU_PLL_IN_FREQ;
- corepll_val = mlxbf_i2c_read(corepll_res->io,
- MLXBF_I2C_CORE_PLL_REG1);
+ corepll_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1);
/* Get Core PLL configuration bits. */
core_f = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT) &
@@ -1490,10 +1459,8 @@ static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res)
pad_frequency = MLXBF_I2C_YU_PLL_IN_FREQ;
- corepll_reg1_val = mlxbf_i2c_read(corepll_res->io,
- MLXBF_I2C_CORE_PLL_REG1);
- corepll_reg2_val = mlxbf_i2c_read(corepll_res->io,
- MLXBF_I2C_CORE_PLL_REG2);
+ corepll_reg1_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1);
+ corepll_reg2_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG2);
/* Get Core PLL configuration bits */
core_f = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT) &
@@ -1585,7 +1552,7 @@ static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr)
* (7-bit address, 1 status bit (1 if enabled, 0 if not)).
*/
for (reg = 0; reg < reg_cnt; reg++) {
- slave_reg = mlxbf_i2c_read(priv->smbus->io,
+ slave_reg = readl(priv->smbus->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
/*
* Each register holds 4 slave addresses. So, we have to keep
@@ -1643,8 +1610,8 @@ static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr)
/* Enable the slave address and update the register. */
slave_reg |= (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT) << (byte * 8);
- mlxbf_i2c_write(priv->smbus->io,
- MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+ writel(slave_reg, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
+ reg * 0x4);
return 0;
}
@@ -1668,7 +1635,7 @@ static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv)
* (7-bit address, 1 status bit (1 if enabled, 0 if not)).
*/
for (reg = 0; reg < reg_cnt; reg++) {
- slave_reg = mlxbf_i2c_read(priv->smbus->io,
+ slave_reg = readl(priv->smbus->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
/* Check whether the address slots are empty. */
@@ -1708,8 +1675,8 @@ static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv)
/* Cleanup the slave address slot. */
slave_reg &= ~(GENMASK(7, 0) << (slave_byte * 8));
- mlxbf_i2c_write(priv->smbus->io,
- MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+ writel(slave_reg, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
+ reg * 0x4);
return 0;
}
@@ -1801,7 +1768,7 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev,
int ret;
/* Reset FSM. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_FSM, 0);
+ writel(0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_FSM);
/*
* Enable slave cause interrupt bits. Drive
@@ -1810,15 +1777,13 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev,
* masters issue a Read and Write, respectively. But, clear all
* interrupts first.
*/
- mlxbf_i2c_write(priv->slv_cause->io,
- MLXBF_I2C_CAUSE_OR_CLEAR, ~0);
+ writel(~0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
int_reg = MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE;
int_reg |= MLXBF_I2C_CAUSE_WRITE_SUCCESS;
- mlxbf_i2c_write(priv->slv_cause->io,
- MLXBF_I2C_CAUSE_OR_EVTEN0, int_reg);
+ writel(int_reg, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_EVTEN0);
/* Finally, set the 'ready' bit to start handling transactions. */
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+ writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
/* Initialize the cause coalesce resource. */
ret = mlxbf_i2c_init_coalesce(pdev, priv);
@@ -1844,23 +1809,21 @@ static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read,
MLXBF_I2C_CAUSE_YU_SLAVE_BIT :
priv->bus + MLXBF_I2C_CAUSE_TYU_SLAVE_BIT;
- coalesce0_reg = mlxbf_i2c_read(priv->coalesce->io,
- MLXBF_I2C_CAUSE_COALESCE_0);
+ coalesce0_reg = readl(priv->coalesce->io + MLXBF_I2C_CAUSE_COALESCE_0);
is_set = coalesce0_reg & (1 << slave_shift);
if (!is_set)
return false;
/* Check the source of the interrupt, i.e. whether a Read or Write. */
- cause_reg = mlxbf_i2c_read(priv->slv_cause->io,
- MLXBF_I2C_CAUSE_ARBITER);
+ cause_reg = readl(priv->slv_cause->io + MLXBF_I2C_CAUSE_ARBITER);
if (cause_reg & MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE)
*read = true;
else if (cause_reg & MLXBF_I2C_CAUSE_WRITE_SUCCESS)
*write = true;
/* Clear cause bits. */
- mlxbf_i2c_write(priv->slv_cause->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+ writel(~0x0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
return true;
}
@@ -1900,8 +1863,8 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
* address, if supplied.
*/
if (recv_bytes > 0) {
- data32 = mlxbf_i2c_read_data(priv->smbus->io,
- MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+ data32 = ioread32be(priv->smbus->io +
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
/* Parse the received bytes. */
switch (recv_bytes) {
@@ -1966,7 +1929,7 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT);
control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_GW, control32);
+ writel(control32, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_GW);
/*
* Wait until the transfer is completed; the driver will wait
@@ -1975,10 +1938,9 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
mlxbf_smbus_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);
/* Release the Slave GW. */
- mlxbf_i2c_write(priv->smbus->io,
- MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
return 0;
}
@@ -2023,10 +1985,9 @@ static int mlxbf_smbus_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
/* Release the Slave GW. */
- mlxbf_i2c_write(priv->smbus->io,
- MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
- mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
return ret;
}
@@ -2061,8 +2022,8 @@ static irqreturn_t mlxbf_smbus_irq(int irq, void *ptr)
* slave, if the higher 8 bits are sent then the slave expect N bytes
* from the master.
*/
- rw_bytes_reg = mlxbf_i2c_read(priv->smbus->io,
- MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ rw_bytes_reg = readl(priv->smbus->io +
+ MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0);
/*