diff options
author | Khalil Blaiech <kblaiech@nvidia.com> | 2020-11-03 14:54:40 -0500 |
---|---|---|
committer | Wolfram Sang <wsa@kernel.org> | 2020-11-06 15:51:57 +0100 |
commit | 4b19d806ac5272bb9f64d78ca6832867870eb45d (patch) | |
tree | 237f17e1b9630fffbb2ffb65efce47289defa447 | |
parent | 08e019e27a9ed0d6c410176cab4e029e3d233cb8 (diff) | |
download | linux-4b19d806ac5272bb9f64d78ca6832867870eb45d.tar.bz2 |
i2c: mlxbf: Remove unecessary wrapper functions
Few wrapper functions are useless and can be inlined. So
delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace
them with readl() and writel(), respectively. Also delete
mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace
them with ioread32be() and iowrite32be(), respectively.
Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-rw-r--r-- | drivers/i2c/busses/i2c-mlxbf.c | 183 |
1 files changed, 72 insertions, 111 deletions
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index 4bd80b1b6a29..fca8a3bddcb1 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -489,44 +489,6 @@ static struct mutex mlxbf_i2c_bus_lock; #define MLXBF_I2C_FREQUENCY_1GHZ 1000000000 -static void mlxbf_i2c_write(void __iomem *io, int reg, u32 val) -{ - writel(val, io + reg); -} - -static u32 mlxbf_i2c_read(void __iomem *io, int reg) -{ - return readl(io + reg); -} - -/* - * This function is used to read data from Master GW Data Descriptor. - * Data bytes in the Master GW Data Descriptor are shifted left so the - * data starts at the MSB of the descriptor registers as set by the - * underlying hardware. TYU_READ_DATA enables byte swapping while - * reading data bytes, and MUST be called by the SMBus read routines - * to copy data from the 32 * 32-bit HW Data registers a.k.a Master GW - * Data Descriptor. - */ -static u32 mlxbf_i2c_read_data(void __iomem *io, int reg) -{ - return ioread32be(io + reg); -} - -/* - * This function is used to write data to the Master GW Data Descriptor. - * Data copied to the Master GW Data Descriptor MUST be shifted left so - * the data starts at the MSB of the descriptor registers as required by - * the underlying hardware. TYU_WRITE_DATA enables byte swapping when - * writing data bytes, and MUST be called by the SMBus write routines to - * copy data to the 32 * 32-bit HW Data registers a.k.a Master GW Data - * Descriptor. - */ -static void mlxbf_i2c_write_data(void __iomem *io, int reg, u32 val) -{ - iowrite32be(val, io + reg); -} - /* * Function to poll a set of bits at a specific address; it checks whether * the bits are equal to zero when eq_zero is set to 'true', and not equal @@ -541,7 +503,7 @@ static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask, timeout = (timeout / MLXBF_I2C_POLL_FREQ_IN_USEC) + 1; do { - bits = mlxbf_i2c_read(io, addr) & mask; + bits = readl(io + addr) & mask; if (eq_zero ? bits == 0 : bits != 0) return eq_zero ? 1 : bits; udelay(MLXBF_I2C_POLL_FREQ_IN_USEC); @@ -609,16 +571,16 @@ static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv) MLXBF_I2C_SMBUS_TIMEOUT); /* Read cause status bits. */ - cause_status_bits = mlxbf_i2c_read(priv->mst_cause->io, - MLXBF_I2C_CAUSE_ARBITER); + cause_status_bits = readl(priv->mst_cause->io + + MLXBF_I2C_CAUSE_ARBITER); cause_status_bits &= MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK; /* * Parse both Cause and Master GW bits, then return transaction status. */ - master_status_bits = mlxbf_i2c_read(priv->smbus->io, - MLXBF_I2C_SMBUS_MASTER_STATUS); + master_status_bits = readl(priv->smbus->io + + MLXBF_I2C_SMBUS_MASTER_STATUS); master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK; if (mlxbf_i2c_smbus_transaction_success(master_status_bits, @@ -649,10 +611,17 @@ static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv, aligned_length = round_up(length, 4); - /* Copy data bytes from 4-byte aligned source buffer. */ + /* + * Copy data bytes from 4-byte aligned source buffer. + * Data copied to the Master GW Data Descriptor MUST be shifted + * left so the data starts at the MSB of the descriptor registers + * as required by the underlying hardware. Enable byte swapping + * when writing data bytes to the 32 * 32-bit HW Data registers + * a.k.a Master GW Data Descriptor. + */ for (offset = 0; offset < aligned_length; offset += sizeof(u32)) { data32 = *((u32 *)(data + offset)); - mlxbf_i2c_write_data(priv->smbus->io, addr + offset, data32); + iowrite32be(data32, priv->smbus->io + addr + offset); } } @@ -664,15 +633,23 @@ static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv, mask = sizeof(u32) - 1; + /* + * Data bytes in the Master GW Data Descriptor are shifted left + * so the data starts at the MSB of the descriptor registers as + * set by the underlying hardware. Enable byte swapping while + * reading data bytes from the 32 * 32-bit HW Data registers + * a.k.a Master GW Data Descriptor. + */ + for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) { - data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset); + data32 = ioread32be(priv->smbus->io + addr + offset); *((u32 *)(data + offset)) = data32; } if (!(length & mask)) return; - data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset); + data32 = ioread32be(priv->smbus->io + addr + offset); for (byte = 0; byte < (length & mask); byte++) { data[offset + byte] = data32 & GENMASK(7, 0); @@ -698,16 +675,16 @@ static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave, command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT); /* Clear status bits. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_STATUS, 0x0); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_STATUS); /* Set the cause data. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0); + writel(~0x0, priv->smbus->io + MLXBF_I2C_CAUSE_OR_CLEAR); /* Zero PEC byte. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_PEC, 0x0); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_PEC); /* Zero byte count. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_RS_BYTES, 0x0); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_RS_BYTES); /* GW activation. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW, command); + writel(command, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_GW); /* * Poll master status and check status bits. An ACK is sent when @@ -823,8 +800,8 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv, * needs to be 'manually' reset. This should be removed in * next tag integration. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_FSM, - MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK); + writel(MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK, + priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_FSM); } return ret; @@ -1113,8 +1090,8 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv, timer |= mlxbf_i2c_set_timer(priv, timings->scl_low, false, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH, - timer); + writel(timer, priv->smbus->io + + MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH); timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false, MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_0); @@ -1124,37 +1101,34 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv, MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16); timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false, MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE, - timer); + writel(timer, priv->smbus->io + + MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE); timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0); timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_THOLD, timer); + writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_THOLD); timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0); timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16); - mlxbf_i2c_write(priv->smbus->io, - MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP, timer); + writel(timer, priv->smbus->io + + MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP); timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA, - timer); + writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA); timer = mlxbf_i2c_set_timer(priv, timings->buf, false, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0); timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_THIGH_MAX_TBUF, - timer); + writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF); timer = timings->timeout; - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT, - timer); + writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT); } enum mlxbf_i2c_timings_config { @@ -1426,19 +1400,15 @@ static int mlxbf_i2c_init_master(struct platform_device *pdev, * platform firmware; disabling the bus might compromise the system * functionality. */ - config_reg = mlxbf_i2c_read(gpio_res->io, - MLXBF_I2C_GPIO_0_FUNC_EN_0); + config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0); config_reg = MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(priv->bus, config_reg); - mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FUNC_EN_0, - config_reg); + writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0); - config_reg = mlxbf_i2c_read(gpio_res->io, - MLXBF_I2C_GPIO_0_FORCE_OE_EN); + config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN); config_reg = MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(priv->bus, config_reg); - mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FORCE_OE_EN, - config_reg); + writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN); mutex_unlock(gpio_res->lock); @@ -1454,8 +1424,7 @@ static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res) pad_frequency = MLXBF_I2C_TYU_PLL_IN_FREQ; - corepll_val = mlxbf_i2c_read(corepll_res->io, - MLXBF_I2C_CORE_PLL_REG1); + corepll_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1); /* Get Core PLL configuration bits. */ core_f = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT) & @@ -1490,10 +1459,8 @@ static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res) pad_frequency = MLXBF_I2C_YU_PLL_IN_FREQ; - corepll_reg1_val = mlxbf_i2c_read(corepll_res->io, - MLXBF_I2C_CORE_PLL_REG1); - corepll_reg2_val = mlxbf_i2c_read(corepll_res->io, - MLXBF_I2C_CORE_PLL_REG2); + corepll_reg1_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1); + corepll_reg2_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG2); /* Get Core PLL configuration bits */ core_f = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT) & @@ -1585,7 +1552,7 @@ static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr) * (7-bit address, 1 status bit (1 if enabled, 0 if not)). */ for (reg = 0; reg < reg_cnt; reg++) { - slave_reg = mlxbf_i2c_read(priv->smbus->io, + slave_reg = readl(priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4); /* * Each register holds 4 slave addresses. So, we have to keep @@ -1643,8 +1610,8 @@ static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr) /* Enable the slave address and update the register. */ slave_reg |= (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT) << (byte * 8); - mlxbf_i2c_write(priv->smbus->io, - MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg); + writel(slave_reg, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + + reg * 0x4); return 0; } @@ -1668,7 +1635,7 @@ static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv) * (7-bit address, 1 status bit (1 if enabled, 0 if not)). */ for (reg = 0; reg < reg_cnt; reg++) { - slave_reg = mlxbf_i2c_read(priv->smbus->io, + slave_reg = readl(priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4); /* Check whether the address slots are empty. */ @@ -1708,8 +1675,8 @@ static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv) /* Cleanup the slave address slot. */ slave_reg &= ~(GENMASK(7, 0) << (slave_byte * 8)); - mlxbf_i2c_write(priv->smbus->io, - MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg); + writel(slave_reg, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + + reg * 0x4); return 0; } @@ -1801,7 +1768,7 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev, int ret; /* Reset FSM. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_FSM, 0); + writel(0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_FSM); /* * Enable slave cause interrupt bits. Drive @@ -1810,15 +1777,13 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev, * masters issue a Read and Write, respectively. But, clear all * interrupts first. */ - mlxbf_i2c_write(priv->slv_cause->io, - MLXBF_I2C_CAUSE_OR_CLEAR, ~0); + writel(~0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR); int_reg = MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE; int_reg |= MLXBF_I2C_CAUSE_WRITE_SUCCESS; - mlxbf_i2c_write(priv->slv_cause->io, - MLXBF_I2C_CAUSE_OR_EVTEN0, int_reg); + writel(int_reg, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_EVTEN0); /* Finally, set the 'ready' bit to start handling transactions. */ - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1); + writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY); /* Initialize the cause coalesce resource. */ ret = mlxbf_i2c_init_coalesce(pdev, priv); @@ -1844,23 +1809,21 @@ static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read, MLXBF_I2C_CAUSE_YU_SLAVE_BIT : priv->bus + MLXBF_I2C_CAUSE_TYU_SLAVE_BIT; - coalesce0_reg = mlxbf_i2c_read(priv->coalesce->io, - MLXBF_I2C_CAUSE_COALESCE_0); + coalesce0_reg = readl(priv->coalesce->io + MLXBF_I2C_CAUSE_COALESCE_0); is_set = coalesce0_reg & (1 << slave_shift); if (!is_set) return false; /* Check the source of the interrupt, i.e. whether a Read or Write. */ - cause_reg = mlxbf_i2c_read(priv->slv_cause->io, - MLXBF_I2C_CAUSE_ARBITER); + cause_reg = readl(priv->slv_cause->io + MLXBF_I2C_CAUSE_ARBITER); if (cause_reg & MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE) *read = true; else if (cause_reg & MLXBF_I2C_CAUSE_WRITE_SUCCESS) *write = true; /* Clear cause bits. */ - mlxbf_i2c_write(priv->slv_cause->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0); + writel(~0x0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR); return true; } @@ -1900,8 +1863,8 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes) * address, if supplied. */ if (recv_bytes > 0) { - data32 = mlxbf_i2c_read_data(priv->smbus->io, - MLXBF_I2C_SLAVE_DATA_DESC_ADDR); + data32 = ioread32be(priv->smbus->io + + MLXBF_I2C_SLAVE_DATA_DESC_ADDR); /* Parse the received bytes. */ switch (recv_bytes) { @@ -1966,7 +1929,7 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes) control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT); control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_GW, control32); + writel(control32, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_GW); /* * Wait until the transfer is completed; the driver will wait @@ -1975,10 +1938,9 @@ static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes) mlxbf_smbus_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT); /* Release the Slave GW. */ - mlxbf_i2c_write(priv->smbus->io, - MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC); + writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY); return 0; } @@ -2023,10 +1985,9 @@ static int mlxbf_smbus_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes) i2c_slave_event(slave, I2C_SLAVE_STOP, &value); /* Release the Slave GW. */ - mlxbf_i2c_write(priv->smbus->io, - MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0); - mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES); + writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC); + writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY); return ret; } @@ -2061,8 +2022,8 @@ static irqreturn_t mlxbf_smbus_irq(int irq, void *ptr) * slave, if the higher 8 bits are sent then the slave expect N bytes * from the master. */ - rw_bytes_reg = mlxbf_i2c_read(priv->smbus->io, - MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES); + rw_bytes_reg = readl(priv->smbus->io + + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES); recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0); /* |