Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
 "MTD core changes:
   - Spelling
   - http to https updates

  NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
     TC58NVG0S3E, and TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  SPI NOR core changes:
   - Disable Quad Mode in spi_nor_restore().
   - Don't abort BFPT parsing when QER reserved value is used.
   - Add support/update capabilities for few flashes.
   - Drop s70fl01gs flash: it does not support RDSR(05h) which is
     critical for erase/write.
   - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
     the release cycle.

  SPI NOR controller drivers changes:
   - Move the cadence-quadspi driver to spi-mem. The series was taken
     through the SPI tree. Merge it also in spi-nor/next to avoid
     conflicts during the release cycle.
   - intel-spi:
      - Add new PCI IDs.
      - Ignore the Write Disable command, the controller doesn't support
        it.
      - Fix performance regression"

* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
  MTD: pfow.h: drop a duplicated word
  MTD: mtd-abi.h: drop a duplicated word
  mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
  mtd: Replace HTTP links with HTTPS ones
  mtd: hyperbus: Replace HTTP links with HTTPS ones
  mtd: revert "spi-nor: intel: provide a range for poll_timout"
  mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
  mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
  mtd: spi-nor: macronix: Add support for mx66u2g45g
  mtd: spi-nor: intel-spi: Simulate WRDI command
  mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
  mtd: spi-nor: Add capability to disable flash quad mode
  mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
  mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
  mtd: rawnand: stm32_fmc2: get resources from parent node
  mtd: rawnand: stm32_fmc2: use regmap APIs
  memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
  dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
  dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
  ...

1 files changed, 13 insertions, 11 deletions

diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index ba27902fc54b..b9945791a9d7 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -28,8 +28,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 */
 	{"TC58NVG0S3E 1G 3.3V 8-bit",
 		{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
-		  SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512),
-		  2 },
+		  SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
 	{"TC58NVG2S0F 4G 3.3V 8-bit",
 		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
 		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
@@ -51,7 +50,10 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
 		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
-		  NAND_ECC_INFO(40, SZ_1K), 4 },
+		  NAND_ECC_INFO(40, SZ_1K) },
+	{"TH58NVG2S3HBAI4 4G 3.3V 8-bit",
+		{ .id = {0x98, 0xdc, 0x91, 0x15, 0x76} },
+		  SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
@@ -166,7 +168,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 };
 
 /* Manufacturer IDs */
-static const struct nand_manufacturer nand_manufacturers[] = {
+static const struct nand_manufacturer_desc nand_manufacturer_descs[] = {
 	{NAND_MFR_AMD, "AMD/Spansion", &amd_nand_manuf_ops},
 	{NAND_MFR_ATO, "ATO"},
 	{NAND_MFR_EON, "Eon"},
@@ -186,20 +188,20 @@ static const struct nand_manufacturer nand_manufacturers[] = {
 };
 
 /**
- * nand_get_manufacturer - Get manufacturer information from the manufacturer
- *			   ID
+ * nand_get_manufacturer_desc - Get manufacturer information from the
+ *                              manufacturer ID
  * @id: manufacturer ID
  *
- * Returns a pointer a nand_manufacturer object if the manufacturer is defined
+ * Returns a nand_manufacturer_desc object if the manufacturer is defined
  * in the NAND manufacturers database, NULL otherwise.
  */
-const struct nand_manufacturer *nand_get_manufacturer(u8 id)
+const struct nand_manufacturer_desc *nand_get_manufacturer_desc(u8 id)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(nand_manufacturers); i++)
-		if (nand_manufacturers[i].id == id)
-			return &nand_manufacturers[i];
+	for (i = 0; i < ARRAY_SIZE(nand_manufacturer_descs); i++)
+		if (nand_manufacturer_descs[i].id == id)
+			return &nand_manufacturer_descs[i];
 
 	return NULL;
 }