summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-08-09 12:38:51 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-08-09 12:38:51 -0700
commitdec1fbbc1d7c46aed9fc1d3ee1f7f4fc04d6ed51 (patch)
treea2d88e9bb259c7866be2129dedf77a828ca8911a
parent71fa1a4489ff93ac4acd7e6c5b00098ba53a4485 (diff)
parent6a1380271b75e0d9a961e192e56b733fedf7a23a (diff)
downloadlinux-dec1fbbc1d7c46aed9fc1d3ee1f7f4fc04d6ed51.tar.bz2
Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml252
-rw-r--r--Documentation/devicetree/bindings/mtd/davinci-nand.txt4
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt10
-rw-r--r--Documentation/devicetree/bindings/mtd/nand-controller.yaml7
-rw-r--r--Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml83
-rw-r--r--drivers/memory/Kconfig10
-rw-r--r--drivers/memory/Makefile1
-rw-r--r--drivers/memory/stm32-fmc2-ebi.c1206
-rw-r--r--drivers/mtd/chips/Kconfig2
-rw-r--r--drivers/mtd/hyperbus/hbmc-am654.c2
-rw-r--r--drivers/mtd/hyperbus/hyperbus-core.c2
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/sc520cdp.c2
-rw-r--r--drivers/mtd/nand/Kconfig5
-rw-r--r--drivers/mtd/nand/onenand/Kconfig1
-rw-r--r--drivers/mtd/nand/raw/Kconfig2
-rw-r--r--drivers/mtd/nand/raw/ams-delta.c6
-rw-r--r--drivers/mtd/nand/raw/arasan-nand-controller.c6
-rw-r--r--drivers/mtd/nand/raw/atmel/nand-controller.c34
-rw-r--r--drivers/mtd/nand/raw/brcmnand/brcmnand.c31
-rw-r--r--drivers/mtd/nand/raw/cadence-nand-controller.c6
-rw-r--r--drivers/mtd/nand/raw/denali.c8
-rw-r--r--drivers/mtd/nand/raw/fsl_upm.c311
-rw-r--r--drivers/mtd/nand/raw/fsmc_nand.c6
-rw-r--r--drivers/mtd/nand/raw/gpio.c112
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c6
-rw-r--r--drivers/mtd/nand/raw/ingenic/jz4740_ecc.c4
-rw-r--r--drivers/mtd/nand/raw/internals.h23
-rw-r--r--drivers/mtd/nand/raw/marvell_nand.c18
-rw-r--r--drivers/mtd/nand/raw/meson_nand.c14
-rw-r--r--drivers/mtd/nand/raw/mtk_nand.c122
-rw-r--r--drivers/mtd/nand/raw/mxc_nand.c22
-rw-r--r--drivers/mtd/nand/raw/mxic_nand.c6
-rw-r--r--drivers/mtd/nand/raw/nand_base.c275
-rw-r--r--drivers/mtd/nand/raw/nand_bbt.c2
-rw-r--r--drivers/mtd/nand/raw/nand_hynix.c16
-rw-r--r--drivers/mtd/nand/raw/nand_ids.c24
-rw-r--r--drivers/mtd/nand/raw/nand_legacy.c7
-rw-r--r--drivers/mtd/nand/raw/nand_macronix.c10
-rw-r--r--drivers/mtd/nand/raw/nand_micron.c2
-rw-r--r--drivers/mtd/nand/raw/nand_timings.c116
-rw-r--r--drivers/mtd/nand/raw/nand_toshiba.c72
-rw-r--r--drivers/mtd/nand/raw/omap_elm.c2
-rw-r--r--drivers/mtd/nand/raw/qcom_nandc.c18
-rw-r--r--drivers/mtd/nand/raw/s3c2410.c6
-rw-r--r--drivers/mtd/nand/raw/stm32_fmc2_nand.c317
-rw-r--r--drivers/mtd/nand/raw/sunxi_nand.c6
-rw-r--r--drivers/mtd/nand/raw/tango_nand.c129
-rw-r--r--drivers/mtd/nand/raw/tegra_nand.c6
-rw-r--r--drivers/mtd/parsers/bcm63xxpart.c32
-rw-r--r--drivers/mtd/spi-nor/controllers/intel-spi-pci.c2
-rw-r--r--drivers/mtd/spi-nor/controllers/intel-spi.c13
-rw-r--r--drivers/mtd/spi-nor/core.c57
-rw-r--r--drivers/mtd/spi-nor/core.h10
-rw-r--r--drivers/mtd/spi-nor/macronix.c6
-rw-r--r--drivers/mtd/spi-nor/micron-st.c4
-rw-r--r--drivers/mtd/spi-nor/sfdp.c3
-rw-r--r--drivers/mtd/spi-nor/spansion.c4
-rw-r--r--drivers/mtd/spi-nor/winbond.c4
-rw-r--r--include/linux/mtd/hyperbus.h2
-rw-r--r--include/linux/mtd/nand.h12
-rw-r--r--include/linux/mtd/pfow.h2
-rw-r--r--include/linux/mtd/rawnand.h265
-rw-r--r--include/linux/mtd/spinand.h2
-rw-r--r--include/uapi/mtd/mtd-abi.h2
65 files changed, 2788 insertions, 966 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
new file mode 100644
index 000000000000..70eaf739036b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -0,0 +1,252 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+
+description: |
+ The FMC2 functional block makes the interface with: synchronous and
+ asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
+ peripherals) and NAND flash memories.
+ Its main purposes are:
+ - to translate AXI transactions into the appropriate external device
+ protocol
+ - to meet the access time requirements of the external devices
+ All external devices share the addresses, data and control signals with the
+ controller. Each external device is accessed by means of a unique Chip
+ Select. The FMC2 performs only one access at a time to an external device.
+
+maintainers:
+ - Christophe Kerello <christophe.kerello@st.com>
+
+properties:
+ compatible:
+ const: st,stm32mp1-fmc2-ebi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description: |
+ Reflects the memory layout with four integer values per bank. Format:
+ <bank-number> 0 <address of the bank> <size>
+
+patternProperties:
+ "^.*@[0-4],[a-f0-9]+$":
+ type: object
+
+ properties:
+ reg:
+ description: Bank number, base address and size of the device.
+
+ st,fmc2-ebi-cs-transaction-type:
+ description: |
+ Select one of the transactions type supported
+ 0: Asynchronous mode 1 SRAM/FRAM.
+ 1: Asynchronous mode 1 PSRAM.
+ 2: Asynchronous mode A SRAM/FRAM.
+ 3: Asynchronous mode A PSRAM.
+ 4: Asynchronous mode 2 NOR.
+ 5: Asynchronous mode B NOR.
+ 6: Asynchronous mode C NOR.
+ 7: Asynchronous mode D NOR.
+ 8: Synchronous read synchronous write PSRAM.
+ 9: Synchronous read asynchronous write PSRAM.
+ 10: Synchronous read synchronous write NOR.
+ 11: Synchronous read asynchronous write NOR.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 11
+
+ st,fmc2-ebi-cs-cclk-enable:
+ description: Continuous clock enable (first bank must be configured
+ in synchronous mode). The FMC_CLK is generated continuously
+ during asynchronous and synchronous access. By default, the
+ FMC_CLK is only generated during synchronous access.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-mux-enable:
+ description: Address/Data multiplexed on databus (valid only with
+ NOR and PSRAM transactions type). By default, Address/Data
+ are not multiplexed.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-buswidth:
+ description: Data bus width
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 16 ]
+ default: 16
+
+ st,fmc2-ebi-cs-waitpol-high:
+ description: Wait signal polarity (NWAIT signal active high).
+ By default, NWAIT is active low.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-waitcfg-enable:
+ description: The NWAIT signal indicates wheither the data from the
+ device are valid or if a wait state must be inserted when accessing
+ the device in synchronous mode. By default, the NWAIT signal is
+ active one data cycle before wait state.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-wait-enable:
+ description: The NWAIT signal is enabled (its level is taken into
+ account after the programmed latency period to insert wait states
+ if asserted). By default, the NWAIT signal is disabled.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-asyncwait-enable:
+ description: The NWAIT signal is taken into account during asynchronous
+ transactions. By default, the NWAIT signal is not taken into account
+ during asynchronous transactions.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ st,fmc2-ebi-cs-cpsize:
+ description: CRAM page size. The controller splits the burst access
+ when the memory page is reached. By default, no burst split when
+ crossing page boundary.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 128, 256, 512, 1024 ]
+ default: 0
+
+ st,fmc2-ebi-cs-byte-lane-setup-ns:
+ description: This property configures the byte lane setup timing
+ defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+ st,fmc2-ebi-cs-address-setup-ns:
+ description: This property defines the duration of the address setup
+ phase in nanoseconds used for asynchronous read/write transactions.
+
+ st,fmc2-ebi-cs-address-hold-ns:
+ description: This property defines the duration of the address hold
+ phase in nanoseconds used for asynchronous multiplexed read/write
+ transactions.
+
+ st,fmc2-ebi-cs-data-setup-ns:
+ description: This property defines the duration of the data setup phase
+ in nanoseconds used for asynchronous read/write transactions.
+
+ st,fmc2-ebi-cs-bus-turnaround-ns:
+ description: This property defines the delay in nanoseconds between the
+ end of current read/write transaction and the next transaction.
+
+ st,fmc2-ebi-cs-data-hold-ns:
+ description: This property defines the duration of the data hold phase
+ in nanoseconds used for asynchronous read/write transactions.
+
+ st,fmc2-ebi-cs-clk-period-ns:
+ description: This property defines the FMC_CLK output signal period in
+ nanoseconds.
+
+ st,fmc2-ebi-cs-data-latency-ns:
+ description: This property defines the data latency before reading or
+ writing the first data in nanoseconds.
+
+ st,fmc2_ebi-cs-write-address-setup-ns:
+ description: This property defines the duration of the address setup
+ phase in nanoseconds used for asynchronous write transactions.
+
+ st,fmc2-ebi-cs-write-address-hold-ns:
+ description: This property defines the duration of the address hold
+ phase in nanoseconds used for asynchronous multiplexed write
+ transactions.
+
+ st,fmc2-ebi-cs-write-data-setup-ns:
+ description: This property defines the duration of the data setup
+ phase in nanoseconds used for asynchronous write transactions.
+
+ st,fmc2-ebi-cs-write-bus-turnaround-ns:
+ description: This property defines the delay between the end of current
+ write transaction and the next transaction in nanoseconds.
+
+ st,fmc2-ebi-cs-write-data-hold-ns:
+ description: This property defines the duration of the data hold phase
+ in nanoseconds used for asynchronous write transactions.
+
+ st,fmc2-ebi-cs-max-low-pulse-ns:
+ description: This property defines the maximum chip select low pulse
+ duration in nanoseconds for synchronous transactions. When this timing
+ reaches 0, the controller splits the current access, toggles NE to
+ allow device refresh and restarts a new access.
+
+ required:
+ - reg
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - clocks
+ - ranges
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ psram@0,0 {
+ compatible = "mtd-ram";
+ reg = <0 0x00000000 0x100000>;
+ bank-width = <2>;
+
+ st,fmc2-ebi-cs-transaction-type = <1>;
+ st,fmc2-ebi-cs-address-setup-ns = <60>;
+ st,fmc2-ebi-cs-data-setup-ns = <30>;
+ st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+ };
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
index cfb18abe6001..edebeae1f5b3 100644
--- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -4,8 +4,8 @@ This file provides information, what the device node for the davinci/keystone
NAND interface contains.
Documentation:
-Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
-Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
Required properties:
diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
index fce4894f5a98..25f07c1f9e44 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -7,14 +7,16 @@ Required properties:
- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
Optional properties:
-- fsl,upm-wait-flags : add chip-dependent short delays after running the
- UPM pattern (0x1), after writing a data byte (0x2) or after
- writing out a buffer (0x4).
- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support.
The corresponding address lines are used to select the chip.
- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
(R/B#). For multi-chip devices, "n" GPIO definitions are required
according to the number of chips.
+
+Deprecated properties:
+- fsl,upm-wait-flags : add chip-dependent short delays after running the
+ UPM pattern (0x1), after writing a data byte (0x2) or after
+ writing out a buffer (0x4).
- chip-delay : chip dependent delay for transferring data from array to
read registers (tR). Required if property "gpios" is not used
(R/B# pins not connected).
@@ -52,8 +54,6 @@ upm@3,0 {
fsl,upm-cmd-offset = <0x08>;
/* Multi-chip NAND device */
fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
- fsl,upm-wait-flags = <0x5>;
- chip-delay = <25>; // in micro-seconds
nand@0 {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index cde7c4d79efe..40fc5b0b2b8c 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -114,6 +114,13 @@ patternProperties:
description:
Contains the native Ready/Busy IDs.
+ rb-gpios:
+ description:
+ Contains one or more GPIO descriptor (the numper of descriptor
+ depends on the number of R/B pins exposed by the flash) for the
+ Ready/Busy pins. Active state refers to the NAND ready state and
+ should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
required:
- reg
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index b059267f6d20..6ae7de15d172 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -9,32 +9,19 @@ title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
maintainers:
- Christophe Kerello <christophe.kerello@st.com>
-allOf:
- - $ref: "nand-controller.yaml#"
-
properties:
compatible:
- const: st,stm32mp15-fmc2
+ enum:
+ - st,stm32mp15-fmc2
+ - st,stm32mp1-fmc2-nfc
reg:
- items:
- - description: Registers
- - description: Chip select 0 data
- - description: Chip select 0 command
- - description: Chip select 0 address space
- - description: Chip select 1 data
- - description: Chip select 1 command
- - description: Chip select 1 address space
+ minItems: 6
+ maxItems: 7
interrupts:
maxItems: 1
- clocks:
- maxItems: 1
-
- resets:
- maxItems: 1
-
dmas:
items:
- description: tx DMA channel
@@ -57,11 +44,55 @@ patternProperties:
nand-ecc-strength:
enum: [1, 4 ,8 ]
+allOf:
+ - $ref: "nand-controller.yaml#"
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp15-fmc2
+ then:
+ properties:
+ reg:
+ items:
+ - description: Registers
+ - description: Chip select 0 data
+ - description: Chip select 0 command
+ - description: Chip select 0 address space
+ - description: Chip select 1 data
+ - description: Chip select 1 command
+ - description: Chip select 1 address space
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp1-fmc2-nfc
+ then:
+ properties:
+ reg:
+ items:
+ - description: Chip select 0 data
+ - description: Chip select 0 command
+ - description: Chip select 0 address space
+ - description: Chip select 1 data
+ - description: Chip select 1 command
+ - description: Chip select 1 address space
+
required:
- compatible
- reg
- interrupts
- - clocks
examples:
- |
@@ -77,13 +108,13 @@ examples:
<0x81000000 0x1000>,
<0x89010000 0x1000>,
<0x89020000 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>,
- <&mdma1 20 0x10 0x12000a08 0x0 0x0>,
- <&mdma1 21 0x10 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 97440af499b0..2c79e95dd486 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -188,6 +188,16 @@ config RENESAS_RPCIF
host or HyperFlash. You'll have to select individual components
under the corresponding menu.
+config STM32_FMC2_EBI
+ tristate "Support for FMC2 External Bus Interface on STM32MP SoCs"
+ depends on MACH_STM32MP157 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ Select this option to enable the STM32 FMC2 External Bus Interface
+ controller. This driver configures the transactions with external
+ devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
+ SOCs containing the FMC2 External Bus Interface.
+
source "drivers/memory/samsung/Kconfig"
source "drivers/memory/tegra/Kconfig"
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index d105f8ebe8b8..b4533ffff2bc 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_MTK_SMI) += mtk-smi.o
obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o
obj-$(CONFIG_PL353_SMC) += pl353-smc.o
obj-$(CONFIG_RENESAS_RPCIF) += renesas-rpc-if.o
+obj-$(CONFIG_STM32_FMC2_EBI) += stm32-fmc2-ebi.o
obj-$(CONFIG_SAMSUNG_MC) += samsung/
obj-$(CONFIG_TEGRA_MC) += tegra/
diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
new file mode 100644
index 000000000000..4d5758c419c5
--- /dev/null
+++ b/drivers/memory/stm32-fmc2-ebi.c
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2020
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* FMC2 Controller Registers */
+#define FMC2_BCR1 0x0
+#define FMC2_BTR1 0x4
+#define FMC2_BCR(x) ((x) * 0x8 + FMC2_BCR1)
+#define FMC2_BTR(x) ((x) * 0x8 + FMC2_BTR1)
+#define FMC2_PCSCNTR 0x20
+#define FMC2_BWTR1 0x104
+#define FMC2_BWTR(x) ((x) * 0x8 + FMC2_BWTR1)
+
+/* Register: FMC2_BCR1 */
+#define FMC2_BCR1_CCLKEN BIT(20)
+#define FMC2_BCR1_FMC2EN BIT(31)
+
+/* Register: FMC2_BCRx */
+#define FMC2_BCR_MBKEN BIT(0)
+#define FMC2_BCR_MUXEN BIT(1)
+#define FMC2_BCR_MTYP GENMASK(3, 2)
+#define FMC2_BCR_MWID GENMASK(5, 4)
+#define FMC2_BCR_FACCEN BIT(6)
+#define FMC2_BCR_BURSTEN BIT(8)
+#define FMC2_BCR_WAITPOL BIT(9)
+#define FMC2_BCR_WAITCFG BIT(11)
+#define FMC2_BCR_WREN BIT(12)
+#define FMC2_BCR_WAITEN BIT(13)
+#define FMC2_BCR_EXTMOD BIT(14)
+#define FMC2_BCR_ASYNCWAIT BIT(15)
+#define FMC2_BCR_CPSIZE GENMASK(18, 16)
+#define FMC2_BCR_CBURSTRW BIT(19)
+#define FMC2_BCR_NBLSET GENMASK(23, 22)
+
+/* Register: FMC2_BTRx/FMC2_BWTRx */
+#define FMC2_BXTR_ADDSET GENMASK(3, 0)
+#define FMC2_BXTR_ADDHLD GENMASK(7, 4)
+#define FMC2_BXTR_DATAST GENMASK(15, 8)
+#define FMC2_BXTR_BUSTURN GENMASK(19, 16)
+#define FMC2_BTR_CLKDIV GENMASK(23, 20)
+#define FMC2_BTR_DATLAT GENMASK(27, 24)
+#define FMC2_BXTR_ACCMOD GENMASK(29, 28)
+#define FMC2_BXTR_DATAHLD GENMASK(31, 30)
+
+/* Register: FMC2_PCSCNTR */
+#define FMC2_PCSCNTR_CSCOUNT GENMASK(15, 0)
+#define FMC2_PCSCNTR_CNTBEN(x) BIT((x) + 16)
+
+#define FMC2_MAX_EBI_CE 4
+#define FMC2_MAX_BANKS 5
+
+#define FMC2_BCR_CPSIZE_0 0x0
+#define FMC2_BCR_CPSIZE_128 0x1
+#define FMC2_BCR_CPSIZE_256 0x2
+#define FMC2_BCR_CPSIZE_512 0x3
+#define FMC2_BCR_CPSIZE_1024 0x4
+
+#define FMC2_BCR_MWID_8 0x0
+#define FMC2_BCR_MWID_16 0x1
+
+#define FMC2_BCR_MTYP_SRAM 0x0
+#define FMC2_BCR_MTYP_PSRAM 0x1
+#define FMC2_BCR_MTYP_NOR 0x2
+
+#define FMC2_BXTR_EXTMOD_A 0x0
+#define FMC2_BXTR_EXTMOD_B 0x1
+#define FMC2_BXTR_EXTMOD_C 0x2
+#define FMC2_BXTR_EXTMOD_D 0x3
+
+#define FMC2_BCR_NBLSET_MAX 0x3
+#define FMC2_BXTR_ADDSET_MAX 0xf
+#define FMC2_BXTR_ADDHLD_MAX 0xf
+#define FMC2_BXTR_DATAST_MAX 0xff
+#define FMC2_BXTR_BUSTURN_MAX 0xf
+#define FMC2_BXTR_DATAHLD_MAX 0x3
+#define FMC2_BTR_CLKDIV_MAX 0xf
+#define FMC2_BTR_DATLAT_MAX 0xf
+#define FMC2_PCSCNTR_CSCOUNT_MAX 0xff
+
+enum stm32_fmc2_ebi_bank {
+ FMC2_EBI1 = 0,
+ FMC2_EBI2,
+ FMC2_EBI3,
+ FMC2_EBI4,
+ FMC2_NAND
+};
+
+enum stm32_fmc2_ebi_register_type {
+ FMC2_REG_BCR = 1,
+ FMC2_REG_BTR,
+ FMC2_REG_BWTR,
+ FMC2_REG_PCSCNTR
+};
+
+enum stm32_fmc2_ebi_transaction_type {
+ FMC2_ASYNC_MODE_1_SRAM = 0,
+ FMC2_ASYNC_MODE_1_PSRAM,
+ FMC2_ASYNC_MODE_A_SRAM,
+ FMC2_ASYNC_MODE_A_PSRAM,
+ FMC2_ASYNC_MODE_2_NOR,
+ FMC2_ASYNC_MODE_B_NOR,
+ FMC2_ASYNC_MODE_C_NOR,
+ FMC2_ASYNC_MODE_D_NOR,
+ FMC2_SYNC_READ_SYNC_WRITE_PSRAM,
+ FMC2_SYNC_READ_ASYNC_WRITE_PSRAM,
+ FMC2_SYNC_READ_SYNC_WRITE_NOR,
+ FMC2_SYNC_READ_ASYNC_WRITE_NOR
+};
+
+enum stm32_fmc2_ebi_buswidth {
+ FMC2_BUSWIDTH_8 = 8,
+ FMC2_BUSWIDTH_16 = 16
+};
+
+enum stm32_fmc2_ebi_cpsize {
+ FMC2_CPSIZE_0 = 0,
+ FMC2_CPSIZE_128 = 128,
+ FMC2_CPSIZE_256 = 256,
+ FMC2_CPSIZE_512 = 512,
+ FMC2_CPSIZE_1024 = 1024
+};
+
+struct stm32_fmc2_ebi {
+ struct device *dev;
+ struct clk *clk;
+ struct regmap *regmap;
+ u8 bank_assigned;
+
+ u32 bcr[FMC2_MAX_EBI_CE];
+ u32 btr[FMC2_MAX_EBI_CE];
+ u32 bwtr[FMC2_MAX_EBI_CE];
+ u32 pcscntr;
+};
+
+/*
+ * struct stm32_fmc2_prop - STM32 FMC2 EBI property
+ * @name: the device tree binding name of the property
+ * @bprop: indicate that it is a boolean property
+ * @mprop: indicate that it is a mandatory property
+ * @reg_type: the register that have to be modified
+ * @reg_mask: the bit that have to be modified in the selected register
+ * in case of it is a boolean property
+ * @reset_val: the default value that have to be set in case the property
+ * has not been defined in the device tree
+ * @check: this callback ckecks that the property is compliant with the
+ * transaction type selected
+ * @calculate: this callback is called to calculate for exemple a timing
+ * set in nanoseconds in the device tree in clock cycles or in
+ * clock period
+ * @set: this callback applies the values in the registers
+ */
+struct stm32_fmc2_prop {
+ const char *name;
+ bool bprop;
+ bool mprop;
+ int reg_type;
+ u32 reg_mask;
+ u32 reset_val;
+ int (*check)(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop, int cs);
+ u32 (*calculate)(struct stm32_fmc2_ebi *ebi, int cs, u32 setup);
+ int (*set)(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup);
+};
+
+static int stm32_fmc2_ebi_check_mux(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (bcr & FMC2_BCR_MTYP)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_waitcfg(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_sync_trans(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_async_trans(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if (!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_cpsize(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+
+ if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_address_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, bxtr, val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (prop->reg_type == FMC2_REG_BWTR)
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &bxtr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &bxtr);
+
+ if ((!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW)) &&
+ ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_clk_period(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ u32 bcr, bcr1;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (cs)
+ regmap_read(ebi->regmap, FMC2_BCR1, &bcr1);
+ else
+ bcr1 = bcr;
+
+ if (bcr & FMC2_BCR_BURSTEN && (!cs || !(bcr1 & FMC2_BCR1_CCLKEN)))
+ return 0;
+
+ return -EINVAL;
+}
+
+static int stm32_fmc2_ebi_check_cclk(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ if (cs)
+ return -EINVAL;
+
+ return stm32_fmc2_ebi_check_sync_trans(ebi, prop, cs);
+}
+
+static u32 stm32_fmc2_ebi_ns_to_clock_cycles(struct stm32_fmc2_ebi *ebi,
+ int cs, u32 setup)
+{
+ unsigned long hclk = clk_get_rate(ebi->clk);
+ unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000);
+
+ return DIV_ROUND_UP(setup * 1000, hclkp);
+}
+
+static u32 stm32_fmc2_ebi_ns_to_clk_period(struct stm32_fmc2_ebi *ebi,
+ int cs, u32 setup)
+{
+ u32 nb_clk_cycles = stm32_fmc2_ebi_ns_to_clock_cycles(ebi, cs, setup);
+ u32 bcr, btr, clk_period;
+
+ regmap_read(ebi->regmap, FMC2_BCR1, &bcr);
+ if (bcr & FMC2_BCR1_CCLKEN || !cs)
+ regmap_read(ebi->regmap, FMC2_BTR1, &btr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &btr);
+
+ clk_period = FIELD_GET(FMC2_BTR_CLKDIV, btr) + 1;
+
+ return DIV_ROUND_UP(nb_clk_cycles, clk_period);
+}
+
+static int stm32_fmc2_ebi_get_reg(int reg_type, int cs, u32 *reg)
+{
+ switch (reg_type) {
+ case FMC2_REG_BCR:
+ *reg = FMC2_BCR(cs);
+ break;
+ case FMC2_REG_BTR:
+ *reg = FMC2_BTR(cs);
+ break;
+ case FMC2_REG_BWTR:
+ *reg = FMC2_BWTR(cs);
+ break;
+ case FMC2_REG_PCSCNTR:
+ *reg = FMC2_PCSCNTR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bit_field(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(ebi->regmap, reg, prop->reg_mask,
+ setup ? prop->reg_mask : 0);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_trans_type(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 bcr_mask, bcr = FMC2_BCR_WREN;
+ u32 btr_mask, btr = 0;
+ u32 bwtr_mask, bwtr = 0;
+
+ bwtr_mask = FMC2_BXTR_ACCMOD;
+ btr_mask = FMC2_BXTR_ACCMOD;
+ bcr_mask = FMC2_BCR_MUXEN | FMC2_BCR_MTYP | FMC2_BCR_FACCEN |
+ FMC2_BCR_WREN | FMC2_BCR_WAITEN | FMC2_BCR_BURSTEN |
+ FMC2_BCR_EXTMOD | FMC2_BCR_CBURSTRW;
+
+ switch (setup) {
+ case FMC2_ASYNC_MODE_1_SRAM:
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
+ /*
+ * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ break;
+ case FMC2_ASYNC_MODE_1_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ break;
+ case FMC2_ASYNC_MODE_A_SRAM:
+ /*
+ * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
+ bcr |= FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ break;
+ case FMC2_ASYNC_MODE_A_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
+ break;
+ case FMC2_ASYNC_MODE_2_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN;
+ break;
+ case FMC2_ASYNC_MODE_B_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 1
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
+ break;
+ case FMC2_ASYNC_MODE_C_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 2
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
+ break;
+ case FMC2_ASYNC_MODE_D_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
+ * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 3
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
+ btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ break;
+ case FMC2_SYNC_READ_SYNC_WRITE_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
+ break;
+ case FMC2_SYNC_READ_ASYNC_WRITE_PSRAM:
+ /*
+ * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
+ bcr |= FMC2_BCR_BURSTEN;
+ break;
+ case FMC2_SYNC_READ_SYNC_WRITE_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
+ break;
+ case FMC2_SYNC_READ_ASYNC_WRITE_NOR:
+ /*
+ * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
+ * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
+ */
+ bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
+ bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN;
+ break;
+ default:
+ /* Type of transaction not supported */
+ return -EINVAL;
+ }
+
+ if (bcr & FMC2_BCR_EXTMOD)
+ regmap_update_bits(ebi->regmap, FMC2_BWTR(cs),
+ bwtr_mask, bwtr);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), btr_mask, btr);
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), bcr_mask, bcr);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_buswidth(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ switch (setup) {
+ case FMC2_BUSWIDTH_8:
+ val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_8);
+ break;
+ case FMC2_BUSWIDTH_16:
+ val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_16);
+ break;
+ default:
+ /* Buswidth not supported */
+ return -EINVAL;
+ }
+
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_MWID, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_cpsize(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ switch (setup) {
+ case FMC2_CPSIZE_0:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_0);
+ break;
+ case FMC2_CPSIZE_128:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_128);
+ break;
+ case FMC2_CPSIZE_256:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_256);
+ break;
+ case FMC2_CPSIZE_512:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_512);
+ break;
+ case FMC2_CPSIZE_1024:
+ val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_1024);
+ break;
+ default:
+ /* Cpsize not supported */
+ return -EINVAL;
+ }
+
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_CPSIZE, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bl_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = min_t(u32, setup, FMC2_BCR_NBLSET_MAX);
+ val = FIELD_PREP(FMC2_BCR_NBLSET, val);
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_NBLSET, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_address_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 bcr, bxtr, reg;
+ u32 val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if (prop->reg_type == FMC2_REG_BWTR)
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &bxtr);
+ else
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &bxtr);
+
+ if ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN)
+ val = clamp_val(setup, 1, FMC2_BXTR_ADDSET_MAX);
+ else
+ val = min_t(u32, setup, FMC2_BXTR_ADDSET_MAX);
+ val = FIELD_PREP(FMC2_BXTR_ADDSET, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_ADDSET, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_address_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ val = clamp_val(setup, 1, FMC2_BXTR_ADDHLD_MAX);
+ val = FIELD_PREP(FMC2_BXTR_ADDHLD, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_ADDHLD, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_setup(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ val = clamp_val(setup, 1, FMC2_BXTR_DATAST_MAX);
+ val = FIELD_PREP(FMC2_BXTR_DATAST, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_DATAST, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_bus_turnaround(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ val = setup ? min_t(u32, setup - 1, FMC2_BXTR_BUSTURN_MAX) : 0;
+ val = FIELD_PREP(FMC2_BXTR_BUSTURN, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_BUSTURN, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_hold(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val, reg;
+ int ret;
+
+ ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
+ if (ret)
+ return ret;
+
+ if (prop->reg_type == FMC2_REG_BWTR)
+ val = setup ? min_t(u32, setup - 1, FMC2_BXTR_DATAHLD_MAX) : 0;
+ else
+ val = min_t(u32, setup, FMC2_BXTR_DATAHLD_MAX);
+ val = FIELD_PREP(FMC2_BXTR_DATAHLD, val);
+ regmap_update_bits(ebi->regmap, reg, FMC2_BXTR_DATAHLD, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_clk_period(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = setup ? clamp_val(setup - 1, 1, FMC2_BTR_CLKDIV_MAX) : 1;
+ val = FIELD_PREP(FMC2_BTR_CLKDIV, val);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), FMC2_BTR_CLKDIV, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_data_latency(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 val;
+
+ val = setup > 1 ? min_t(u32, setup - 2, FMC2_BTR_DATLAT_MAX) : 0;
+ val = FIELD_PREP(FMC2_BTR_DATLAT, val);
+ regmap_update_bits(ebi->regmap, FMC2_BTR(cs), FMC2_BTR_DATLAT, val);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_set_max_low_pulse(struct stm32_fmc2_ebi *ebi,
+ const struct stm32_fmc2_prop *prop,
+ int cs, u32 setup)
+{
+ u32 old_val, new_val, pcscntr;
+
+ if (setup < 1)
+ return 0;
+
+ regmap_read(ebi->regmap, FMC2_PCSCNTR, &pcscntr);
+
+ /* Enable counter for the bank */
+ regmap_update_bits(ebi->regmap, FMC2_PCSCNTR,
+ FMC2_PCSCNTR_CNTBEN(cs),
+ FMC2_PCSCNTR_CNTBEN(cs));
+
+ new_val = min_t(u32, setup - 1, FMC2_PCSCNTR_CSCOUNT_MAX);
+ old_val = FIELD_GET(FMC2_PCSCNTR_CSCOUNT, pcscntr);
+ if (old_val && new_val > old_val)
+ /* Keep current counter value */
+ return 0;
+
+ new_val = FIELD_PREP(FMC2_PCSCNTR_CSCOUNT, new_val);
+ regmap_update_bits(ebi->regmap, FMC2_PCSCNTR,
+ FMC2_PCSCNTR_CSCOUNT, new_val);
+
+ return 0;
+}
+
+static const struct stm32_fmc2_prop stm32_fmc2_child_props[] = {
+ /* st,fmc2-ebi-cs-trans-type must be the first property */
+ {
+ .name = "st,fmc2-ebi-cs-transaction-type",
+ .mprop = true,
+ .set = stm32_fmc2_ebi_set_trans_type,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cclk-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR1_CCLKEN,
+ .check = stm32_fmc2_ebi_check_cclk,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-mux-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_MUXEN,
+ .check = stm32_fmc2_ebi_check_mux,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-buswidth",
+ .reset_val = FMC2_BUSWIDTH_16,
+ .set = stm32_fmc2_ebi_set_buswidth,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitpol-high",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITPOL,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-waitcfg-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITCFG,
+ .check = stm32_fmc2_ebi_check_waitcfg,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-wait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_WAITEN,
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-asyncwait-enable",
+ .bprop = true,
+ .reg_type = FMC2_REG_BCR,
+ .reg_mask = FMC2_BCR_ASYNCWAIT,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .set = stm32_fmc2_ebi_set_bit_field,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-cpsize",
+ .check = stm32_fmc2_ebi_check_cpsize,
+ .set = stm32_fmc2_ebi_set_cpsize,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-byte-lane-setup-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bl_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-address-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-setup-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-hold-ns",
+ .reg_type = FMC2_REG_BTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-clk-period-ns",
+ .reset_val = FMC2_BTR_CLKDIV_MAX + 1,
+ .check = stm32_fmc2_ebi_check_clk_period,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_clk_period,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-data-latency-ns",
+ .check = stm32_fmc2_ebi_check_sync_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clk_period,
+ .set = stm32_fmc2_ebi_set_data_latency,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDSET_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-address-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_ADDHLD_MAX,
+ .check = stm32_fmc2_ebi_check_address_hold,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_address_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-setup-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_DATAST_MAX,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_setup,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-bus-turnaround-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_bus_turnaround,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-write-data-hold-ns",
+ .reg_type = FMC2_REG_BWTR,
+ .check = stm32_fmc2_ebi_check_async_trans,
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_data_hold,
+ },
+ {
+ .name = "st,fmc2-ebi-cs-max-low-pulse-ns",
+ .calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
+ .set = stm32_fmc2_ebi_set_max_low_pulse,
+ },
+};
+
+static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,
+ struct device_node *dev_node,
+ const struct stm32_fmc2_prop *prop,
+ int cs)
+{
+ struct device *dev = ebi->dev;
+ u32 setup = 0;
+
+ if (!prop->set) {
+ dev_err(dev, "property %s is not well defined\n", prop->name);
+ return -EINVAL;
+ }
+
+ if (prop->check && prop->check(ebi, prop, cs))
+ /* Skeep this property */
+ return 0;
+
+ if (prop->bprop) {
+ bool bprop;
+
+ bprop = of_property_read_bool(dev_node, prop->name);
+ if (prop->mprop && !bprop) {
+ dev_err(dev, "mandatory property %s not defined in the device tree\n",
+ prop->name);
+ return -EINVAL;
+ }
+
+ if (bprop)
+ setup = 1;
+ } else {
+ u32 val;
+ int ret;
+
+ ret = of_property_read_u32(dev_node, prop->name, &val);
+ if (prop->mprop && ret) {
+ dev_err(dev, "mandatory property %s not defined in the device tree\n",
+ prop->name);
+ return ret;
+ }
+
+ if (ret)
+ setup = prop->reset_val;
+ else if (prop->calculate)
+ setup = prop->calculate(ebi, cs, val);
+ else
+ setup = val;
+ }
+
+ return prop->set(ebi, prop, cs, setup);
+}
+
+static void stm32_fmc2_ebi_enable_bank(struct stm32_fmc2_ebi *ebi, int cs)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs),
+ FMC2_BCR_MBKEN, FMC2_BCR_MBKEN);
+}
+
+static void stm32_fmc2_ebi_disable_bank(struct stm32_fmc2_ebi *ebi, int cs)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR(cs), FMC2_BCR_MBKEN, 0);
+}
+
+static void stm32_fmc2_ebi_save_setup(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &ebi->bcr[cs]);
+ regmap_read(ebi->regmap, FMC2_BTR(cs), &ebi->btr[cs]);
+ regmap_read(ebi->regmap, FMC2_BWTR(cs), &ebi->bwtr[cs]);
+ }
+
+ regmap_read(ebi->regmap, FMC2_PCSCNTR, &ebi->pcscntr);
+}
+
+static void stm32_fmc2_ebi_set_setup(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ regmap_write(ebi->regmap, FMC2_BCR(cs), ebi->bcr[cs]);
+ regmap_write(ebi->regmap, FMC2_BTR(cs), ebi->btr[cs]);
+ regmap_write(ebi->regmap, FMC2_BWTR(cs), ebi->bwtr[cs]);
+ }
+
+ regmap_write(ebi->regmap, FMC2_PCSCNTR, ebi->pcscntr);
+}
+
+static void stm32_fmc2_ebi_disable_banks(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ if (!(ebi->bank_assigned & BIT(cs)))
+ continue;
+
+ stm32_fmc2_ebi_disable_bank(ebi, cs);
+ }
+}
+
+/* NWAIT signal can not be connected to EBI controller and NAND controller */
+static bool stm32_fmc2_ebi_nwait_used_by_ctrls(struct stm32_fmc2_ebi *ebi)
+{
+ unsigned int cs;
+ u32 bcr;
+
+ for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
+ if (!(ebi->bank_assigned & BIT(cs)))
+ continue;
+
+ regmap_read(ebi->regmap, FMC2_BCR(cs), &bcr);
+ if ((bcr & FMC2_BCR_WAITEN || bcr & FMC2_BCR_ASYNCWAIT) &&
+ ebi->bank_assigned & BIT(FMC2_NAND))
+ return true;
+ }
+
+ return false;
+}
+
+static void stm32_fmc2_ebi_enable(struct stm32_fmc2_ebi *ebi)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR1,
+ FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
+}
+
+static void stm32_fmc2_ebi_disable(struct stm32_fmc2_ebi *ebi)
+{
+ regmap_update_bits(ebi->regmap, FMC2_BCR1, FMC2_BCR1_FMC2EN, 0);
+}
+
+static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi,
+ struct device_node *dev_node,
+ u32 cs)
+{
+ unsigned int i;
+ int ret;
+
+ stm32_fmc2_ebi_disable_bank(ebi, cs);
+
+ for (i = 0; i < ARRAY_SIZE(stm32_fmc2_child_props); i++) {
+ const struct stm32_fmc2_prop *p = &stm32_fmc2_child_props[i];
+
+ ret = stm32_fmc2_ebi_parse_prop(ebi, dev_node, p, cs);
+ if (ret) {
+ dev_err(ebi->dev, "property %s could not be set: %d\n",
+ p->name, ret);
+ return ret;
+ }
+ }
+
+ stm32_fmc2_ebi_enable_bank(ebi, cs);
+
+ return 0;
+}
+
+static int stm32_fmc2_ebi_parse_dt(struct stm32_fmc2_ebi *ebi)
+{
+ struct device *dev = ebi->dev;
+ struct device_node *child;
+ bool child_found = false;
+ u32 bank;
+ int ret;
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ ret = of_property_read_u32(child, "reg", &bank);
+ if (ret) {
+ dev_err(dev, "could not retrieve reg property: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (bank >= FMC2_MAX_BANKS) {
+ dev_err(dev, "invalid reg value: %d\n", bank);
+ return -EINVAL;
+ }
+
+ if (ebi->bank_assigned & BIT(bank)) {
+ dev_err(dev, "bank already assigned: %d\n", bank);
+ return -EINVAL;
+ }
+
+ if (bank < FMC2_MAX_EBI_CE) {
+ ret = stm32_fmc2_ebi_setup_cs(ebi, child, bank);
+ if (ret) {
+ dev_err(dev, "setup chip select %d failed: %d\n",
+ bank, ret);
+ return ret;
+ }
+ }
+
+ ebi->bank_assigned |= BIT(bank);
+ child_found = true;
+ }
+
+ if (!child_found) {
+ dev_warn(dev, "no subnodes found, disable the driver.\n");
+ return -ENODEV;
+ }
+
+ if (stm32_fmc2_ebi_nwait_used_by_ctrls(ebi)) {
+ dev_err(dev, "NWAIT signal connected to EBI and NAND controllers\n");
+ return -EINVAL;
+ }
+
+ stm32_fmc2_ebi_enable(ebi);
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stm32_fmc2_ebi *ebi;
+ struct reset_control *rstc;
+ int ret;
+
+ ebi = devm_kzalloc(&pdev->dev, sizeof(*ebi), GFP_KERNEL);
+ if (!ebi)
+ return -ENOMEM;
+
+ ebi->dev = dev;
+
+ ebi->regmap = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(ebi->regmap))
+ return PTR_ERR(ebi->regmap);
+
+ ebi->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ebi->clk))
+ return PTR_ERR(ebi->clk);
+
+ rstc = devm_reset_control_get(dev, NULL);
+ if (PTR_ERR(rstc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ ret = clk_prepare_enable(ebi->clk);
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+ }
+
+ ret = stm32_fmc2_ebi_parse_dt(ebi);
+ if (ret)
+ goto err_release;
+
+ stm32_fmc2_ebi_save_setup(ebi);
+ platform_set_drvdata(pdev, ebi);
+
+ return 0;
+
+err_release:
+ stm32_fmc2_ebi_disable_banks(ebi);
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+
+ return ret;
+}
+
+static int stm32_fmc2_ebi_remove(struct platform_device *pdev)
+{
+ struct stm32_fmc2_ebi *ebi = platform_get_drvdata(pdev);
+
+ of_platform_depopulate(&pdev->dev);
+ stm32_fmc2_ebi_disable_banks(ebi);
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_fmc2_ebi_suspend(struct device *dev)
+{
+ struct stm32_fmc2_ebi *ebi = dev_get_drvdata(dev);
+
+ stm32_fmc2_ebi_disable(ebi);
+ clk_disable_unprepare(ebi->clk);
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
+{
+ struct stm32_fmc2_ebi *ebi = dev_get_drvdata(dev);
+ int ret;
+
+ pinctrl_pm_select_default_state(dev);
+
+ ret = clk_prepare_enable(ebi->clk);
+ if (ret)
+ return ret;
+
+ stm32_fmc2_ebi_set_setup(ebi);
+ stm32_fmc2_ebi_enable(ebi);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_fmc2_ebi_pm_ops, stm32_fmc2_ebi_suspend,
+ stm32_fmc2_ebi_resume);
+
+static const struct of_device_id stm32_fmc2_ebi_match[] = {
+ {.compatible = "st,stm32mp1-fmc2-ebi"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_fmc2_ebi_match);
+
+static struct platform_driver stm32_fmc2_ebi_driver = {
+ .probe = stm32_fmc2_ebi_probe,
+ .remove = stm32_fmc2_ebi_remove,
+ .driver = {
+ .name = "stm32_fmc2_ebi",
+ .of_match_table = stm32_fmc2_ebi_match,
+ .pm = &stm32_fmc2_ebi_pm_ops,
+ },
+};
+module_platform_driver(stm32_fmc2_ebi_driver);
+
+MODULE_ALIAS("platform:stm32_fmc2_ebi");
+MODULE_AUTHOR("Christophe Kerello <christophe.kerello@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 FMC2 ebi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index a7e47e068ad9..aef14990e5f7 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -11,7 +11,7 @@ config MTD_CFI
AMD and other flash manufactures that provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
- option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+ option. Visit <https://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
config MTD_JEDECPROBE
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index f350a0809f88..e0e33f6bf513 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
//
-// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+// Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
// Author: Vignesh Raghavendra <vigneshr@ti.com>
#include <linux/err.h>
diff --git a/drivers/mtd/hyperbus/hyperbus-core.c b/drivers/mtd/hyperbus/hyperbus-core.c
index 32685e8dd278..2f9fc4e17d53 100644
--- a/drivers/mtd/hyperbus/hyperbus-core.c
+++ b/drivers/mtd/hyperbus/hyperbus-core.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
//
-// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+// Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
// Author: Vignesh Raghavendra <vigneshr@ti.com>
#include <linux/err.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b28225a7c4f3..fd37553f1b07 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -310,7 +310,7 @@ config MTD_DC21285
help
This provides a driver for the flash accessed using Intel's
21285 bridge used with Intel's StrongARM processors. More info at
- <http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
+ <https://www.intel.com/design/bridge/docs/21285_documentation.htm>.
config MTD_IXP4XX
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 9902b37e18b4..8ef7aec634c7 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -6,7 +6,7 @@
* The SC520CDP is an evaluation board for the Elan SC520 processor available
* from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
* and up to 512 KiB of 8-bit DIL Flash ROM.
- * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
+ * For details see https://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
*/
#include <linux/module.h>
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a5d8a211cb8a..c1a45b071165 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,7 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+menu "NAND"
+
config MTD_NAND_CORE
tristate
source "drivers/mtd/nand/onenand/Kconfig"
source "drivers/mtd/nand/raw/Kconfig"
source "drivers/mtd/nand/spi/Kconfig"
+
+endmenu
diff --git a/drivers/mtd/nand/onenand/Kconfig b/drivers/mtd/nand/onenand/Kconfig
index 572b8fe69abb..1a0e65bc246e 100644
--- a/drivers/mtd/nand/onenand/Kconfig
+++ b/drivers/mtd/nand/onenand/Kconfig
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig MTD_ONENAND
tristate "OneNAND Device Support"
- depends on MTD
depends on HAS_IOMEM
help
This enables support for accessing all type of OneNAND flash
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 113f61052269..1203775023ad 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -12,7 +12,6 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
menuconfig MTD_RAW_NAND
tristate "Raw/Parallel NAND Device Support"
- depends on MTD
select MTD_NAND_CORE
select MTD_NAND_ECC_SW_HAMMING
help
@@ -415,6 +414,7 @@ config MTD_NAND_TEGRA
config MTD_NAND_STM32_FMC2
tristate "Support for NAND controller on STM32MP SoCs"
depends on MACH_STM32MP157 || COMPILE_TEST
+ select MFD_SYSCON
help
Enables support for NAND Flash chips on SoCs containing the FMC2
NAND controller. This controller is found on STM32MP SoCs.
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 3711e7a0436c..fdba155416d2 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -191,8 +191,8 @@ static int gpio_nand_exec_op(struct nand_chip *this,
return ret;
}
-static int gpio_nand_setup_data_interface(struct nand_chip *this, int csline,
- const struct nand_data_interface *cf)
+static int gpio_nand_setup_interface(struct nand_chip *this, int csline,
+ const struct nand_interface_config *cf)
{
struct gpio_nand *priv = nand_get_controller_data(this);
const struct nand_sdr_timings *sdr = nand_get_sdr_timings(cf);
@@ -217,7 +217,7 @@ static int gpio_nand_setup_data_interface(struct nand_chip *this, int csline,
static const struct nand_controller_ops gpio_nand_ops = {
.exec_op = gpio_nand_exec_op,
- .setup_data_interface = gpio_nand_setup_data_interface,
+ .setup_interface = gpio_nand_setup_interface,
};
/*
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 7141dcccba3c..12c643e97c85 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -854,8 +854,8 @@ static int anfc_exec_op(struct nand_chip *chip,
return nand_op_parser_exec_op(chip, &anfc_op_parser, op, check_only);
}
-static int anfc_setup_data_interface(struct nand_chip *chip, int target,
- const struct nand_data_interface *conf)
+static int anfc_setup_interface(struct nand_chip *chip, int target,
+ const struct nand_interface_config *conf)
{
struct anand *anand = to_anand(chip);
struct arasan_nfc *nfc = to_anfc(chip->controller);
@@ -1083,7 +1083,7 @@ static void anfc_detach_chip(struct nand_chip *chip)
static const struct nand_controller_ops anfc_ops = {
.exec_op = anfc_exec_op,
- .setup_data_interface = anfc_setup_data_interface,
+ .setup_interface = anfc_setup_interface,
.attach_chip = anfc_attach_chip,
.detach_chip = anfc_detach_chip,
};
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 46a3724a788e..c9818f548d07 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -200,8 +200,8 @@ struct atmel_nand_controller_ops {
void (*nand_init)(struct atmel_nand_controller *nc,
struct atmel_nand *nand);
int (*ecc_init)(struct nand_chip *chip);
- int (*setup_data_interface)(struct atmel_nand *nand, int csline,
- const struct nand_data_interface *conf);
+ int (*setup_interface)(struct atmel_nand *nand, int csline,
+ const struct nand_interface_config *conf);
};
struct atmel_nand_controller_caps {
@@ -1168,7 +1168,7 @@ static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip)
}
static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
- const struct nand_data_interface *conf,
+ const struct nand_interface_config *conf,
struct atmel_smc_cs_conf *smcconf)
{
u32 ncycles, totalcycles, timeps, mckperiodps;
@@ -1397,9 +1397,9 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
return 0;
}
-static int atmel_smc_nand_setup_data_interface(struct atmel_nand *nand,
+static int atmel_smc_nand_setup_interface(struct atmel_nand *nand,
int csline,
- const struct nand_data_interface *conf)
+ const struct nand_interface_config *conf)
{
struct atmel_nand_controller *nc;
struct atmel_smc_cs_conf smcconf;
@@ -1422,9 +1422,9 @@ static int atmel_smc_nand_setup_data_interface(struct atmel_nand *nand,
return 0;
}
-static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
+static int atmel_hsmc_nand_setup_interface(struct atmel_nand *nand,
int csline,
- const struct nand_data_interface *conf)
+ const struct nand_interface_config *conf)
{
struct atmel_hsmc_nand_controller *nc;
struct atmel_smc_cs_conf smcconf;
@@ -1452,8 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
return 0;
}
-static int atmel_nand_setup_data_interface(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+static int atmel_nand_setup_interface(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf)
{
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
@@ -1464,7 +1464,7 @@ static int atmel_nand_setup_data_interface(struct nand_chip *chip, int csline,
(csline < 0 && csline != NAND_DATA_IFACE_CHECK_ONLY))
return -EINVAL;
- return nc->caps->ops->setup_data_interface(nand, csline, conf);
+ return nc->caps->ops->setup_interface(nand, csline, conf);
}
static void atmel_nand_init(struct atmel_nand_controller *nc,
@@ -1483,7 +1483,7 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
chip->legacy.write_buf = atmel_nand_write_buf;
chip->legacy.select_chip = atmel_nand_select_chip;
- if (!nc->mck || !nc->caps->ops->setup_data_interface)
+ if (!nc->mck || !nc->caps->ops->setup_interface)
chip->options |= NAND_KEEP_TIMINGS;
/* Some NANDs require a longer delay than the default one (20us). */
@@ -1956,7 +1956,7 @@ static int atmel_nand_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops atmel_nand_controller_ops = {
.attach_chip = atmel_nand_attach_chip,
- .setup_data_interface = atmel_nand_setup_data_interface,
+ .setup_interface = atmel_nand_setup_interface,
};
static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
@@ -2318,7 +2318,7 @@ static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = {
.remove = atmel_hsmc_nand_controller_remove,
.ecc_init = atmel_hsmc_nand_ecc_init,
.nand_init = atmel_hsmc_nand_init,
- .setup_data_interface = atmel_hsmc_nand_setup_data_interface,
+ .setup_interface = atmel_hsmc_nand_setup_interface,
};
static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = {
@@ -2375,10 +2375,10 @@ atmel_smc_nand_controller_remove(struct atmel_nand_controller *nc)
/*
* The SMC reg layout of at91rm9200 is completely different which prevents us
- * from re-using atmel_smc_nand_setup_data_interface() for the
- * ->setup_data_interface() hook.
+ * from re-using atmel_smc_nand_setup_interface() for the
+ * ->setup_interface() hook.
* At this point, there's no support for the at91rm9200 SMC IP, so we leave
- * ->setup_data_interface() unassigned.
+ * ->setup_interface() unassigned.
*/
static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
.probe = atmel_smc_nand_controller_probe,
@@ -2399,7 +2399,7 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
.remove = atmel_smc_nand_controller_remove,
.ecc_init = atmel_nand_ecc_init,
.nand_init = atmel_smc_nand_init,
- .setup_data_interface = atmel_smc_nand_setup_data_interface,
+ .setup_interface = atmel_smc_nand_setup_interface,
};
static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 44068e9eea03..a4033d32a710 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1918,6 +1918,22 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
edu_writel(ctrl, EDU_STOP, 0); /* force stop */
edu_readl(ctrl, EDU_STOP);
+ if (!ret && edu_cmd == EDU_CMD_READ) {
+ u64 err_addr = 0;
+
+ /*
+ * check for ECC errors here, subpage ECC errors are
+ * retained in ECC error address register
+ */
+ err_addr = brcmnand_get_uncorrecc_addr(ctrl);
+ if (!err_addr) {
+ err_addr = brcmnand_get_correcc_addr(ctrl);
+ if (err_addr)
+ ret = -EUCLEAN;
+ } else
+ ret = -EBADMSG;
+ }
+
return ret;
}
@@ -2124,6 +2140,7 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
u64 err_addr = 0;
int err;
bool retry = true;
+ bool edu_err = false;
dev_dbg(ctrl->dev, "read %llx -> %p\n", (unsigned long long)addr, buf);
@@ -2141,6 +2158,10 @@ try_dmaread:
else
return -EIO;
}
+
+ if (has_edu(ctrl) && err_addr)
+ edu_err = true;
+
} else {
if (oob)
memset(oob, 0x99, mtd->oobsize);
@@ -2188,6 +2209,11 @@ try_dmaread:
if (mtd_is_bitflip(err)) {
unsigned int corrected = brcmnand_count_corrected(ctrl);
+ /* in case of EDU correctable error we read again using PIO */
+ if (edu_err)
+ err = brcmnand_read_by_pio(mtd, chip, addr, trans, buf,
+ oob, &err_addr);
+
dev_dbg(ctrl->dev, "corrected error at 0x%llx\n",
(unsigned long long)err_addr);
mtd->ecc_stats.corrected += corrected;
@@ -3023,8 +3049,9 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
if (ret < 0)
goto err;
- /* set edu transfer function to call */
- ctrl->dma_trans = brcmnand_edu_trans;
+ if (has_edu(ctrl))
+ /* set edu transfer function to call */
+ ctrl->dma_trans = brcmnand_edu_trans;
}
/* Disable automatic device ID config, direct addressing */
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index c4f273e2fe78..71516af85f23 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -2304,8 +2304,8 @@ static inline u32 calc_tdvw(u32 trp_cnt, u32 clk_period, u32 trhoh_min,
}
static int
-cadence_nand_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+cadence_nand_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
const struct nand_sdr_timings *sdr;
struct cdns_nand_ctrl *cdns_ctrl = to_cdns_nand_ctrl(chip->controller);
@@ -2691,7 +2691,7 @@ static int cadence_nand_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops cadence_nand_controller_ops = {
.attach_chip = cadence_nand_attach_chip,
.exec_op = cadence_nand_exec_op,
- .setup_data_interface = cadence_nand_setup_data_interface,
+ .setup_interface = cadence_nand_setup_interface,
};
static int cadence_nand_chip_init(struct cdns_nand_ctrl *cdns_ctrl,
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 4e6e1578aa2d..9d99dade95ce 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -761,8 +761,8 @@ static int denali_write_page(struct nand_chip *chip, const u8 *buf,
return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, true);
}
-static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+static int denali_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
static const unsigned int data_setup_on_host = 10000;
struct denali_controller *denali = to_denali_controller(chip);
@@ -1173,7 +1173,7 @@ static int denali_exec_op(struct nand_chip *chip,
static const struct nand_controller_ops denali_controller_ops = {
.attach_chip = denali_attach_chip,
.exec_op = denali_exec_op,
- .setup_data_interface = denali_setup_data_interface,
+ .setup_interface = denali_setup_interface,
};
int denali_chip_init(struct denali_controller *denali,
@@ -1230,7 +1230,7 @@ int denali_chip_init(struct denali_controller *denali,
chip->buf_align = 16;
}
- /* clk rate info is needed for setup_data_interface */
+ /* clk rate info is needed for setup_interface */
if (!denali->clk_rate || !denali->clk_x_rate)
chip->options |= NAND_KEEP_TIMINGS;
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 627deb26db51..197850aeb261 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -14,32 +14,23 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
-#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/fsl_lbc.h>
-#define FSL_UPM_WAIT_RUN_PATTERN 0x1
-#define FSL_UPM_WAIT_WRITE_BYTE 0x2
-#define FSL_UPM_WAIT_WRITE_BUFFER 0x4
-
struct fsl_upm_nand {
+ struct nand_controller base;
struct device *dev;
struct nand_chip chip;
- int last_ctrl;
- struct mtd_partition *parts;
struct fsl_upm upm;
uint8_t upm_addr_offset;
uint8_t upm_cmd_offset;
void __iomem *io_base;
- int rnb_gpio[NAND_MAX_CHIPS];
+ struct gpio_desc *rnb_gpio[NAND_MAX_CHIPS];
uint32_t mchip_offsets[NAND_MAX_CHIPS];
uint32_t mchip_count;
uint32_t mchip_number;
- int chip_delay;
- uint32_t wait_flags;
};
static inline struct fsl_upm_nand *to_fsl_upm_nand(struct mtd_info *mtdinfo)
@@ -48,106 +39,6 @@ static inline struct fsl_upm_nand *to_fsl_upm_nand(struct mtd_info *mtdinfo)
chip);
}
-static int fun_chip_ready(struct nand_chip *chip)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
-
- if (gpio_get_value(fun->rnb_gpio[fun->mchip_number]))
- return 1;
-
- dev_vdbg(fun->dev, "busy\n");
- return 0;
-}
-
-static void fun_wait_rnb(struct fsl_upm_nand *fun)
-{
- if (fun->rnb_gpio[fun->mchip_number] >= 0) {
- struct mtd_info *mtd = nand_to_mtd(&fun->chip);
- int cnt = 1000000;
-
- while (--cnt && !fun_chip_ready(&fun->chip))
- cpu_relax();
- if (!cnt)
- dev_err(fun->dev, "tired waiting for RNB\n");
- } else {
- ndelay(100);
- }
-}
-
-static void fun_cmd_ctrl(struct nand_chip *chip, int cmd, unsigned int ctrl)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
- u32 mar;
-
- if (!(ctrl & fun->last_ctrl)) {
- fsl_upm_end_pattern(&fun->upm);
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
- }
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_ALE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
- else if (ctrl & NAND_CLE)
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
- }
-
- mar = (cmd << (32 - fun->upm.width)) |
- fun->mchip_offsets[fun->mchip_number];
- fsl_upm_run_pattern(&fun->upm, chip->legacy.IO_ADDR_R, mar);
-
- if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
- fun_wait_rnb(fun);
-}
-
-static void fun_select_chip(struct nand_chip *chip, int mchip_nr)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
-
- if (mchip_nr == -1) {
- chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
- } else if (mchip_nr >= 0 && mchip_nr < NAND_MAX_CHIPS) {
- fun->mchip_number = mchip_nr;
- chip->legacy.IO_ADDR_R = fun->io_base + fun->mchip_offsets[mchip_nr];
- chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
- } else {
- BUG();
- }
-}
-
-static uint8_t fun_read_byte(struct nand_chip *chip)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
-
- return in_8(fun->chip.legacy.IO_ADDR_R);
-}
-
-static void fun_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
- int i;
-
- for (i = 0; i < len; i++)
- buf[i] = in_8(fun->chip.legacy.IO_ADDR_R);
-}
-
-static void fun_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
- int i;
-
- for (i = 0; i < len; i++) {
- out_8(fun->chip.legacy.IO_ADDR_W, buf[i]);
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
- fun_wait_rnb(fun);
- }
- if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
- fun_wait_rnb(fun);
-}
-
static int fun_chip_init(struct fsl_upm_nand *fun,
const struct device_node *upm_np,
const struct resource *io_res)
@@ -156,21 +47,9 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
int ret;
struct device_node *flash_np;
- fun->chip.legacy.IO_ADDR_R = fun->io_base;
- fun->chip.legacy.IO_ADDR_W = fun->io_base;
- fun->chip.legacy.cmd_ctrl = fun_cmd_ctrl;
- fun->chip.legacy.chip_delay = fun->chip_delay;
- fun->chip.legacy.read_byte = fun_read_byte;
- fun->chip.legacy.read_buf = fun_read_buf;
- fun->chip.legacy.write_buf = fun_write_buf;
fun->chip.ecc.mode = NAND_ECC_SOFT;
fun->chip.ecc.algo = NAND_ECC_HAMMING;
- if (fun->mchip_count > 1)
- fun->chip.legacy.select_chip = fun_select_chip;
-
- if (fun->rnb_gpio[0] >= 0)
- fun->chip.legacy.dev_ready = fun_chip_ready;
-
+ fun->chip.controller = &fun->base;
mtd->dev.parent = fun->dev;
flash_np = of_get_next_child(upm_np, NULL);
@@ -178,8 +57,9 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
return -ENODEV;
nand_set_flash_node(&fun->chip, flash_np);
- mtd->name = kasprintf(GFP_KERNEL, "0x%llx.%pOFn", (u64)io_res->start,
- flash_np);
+ mtd->name = devm_kasprintf(fun->dev, GFP_KERNEL, "0x%llx.%pOFn",
+ (u64)io_res->start,
+ flash_np);
if (!mtd->name) {
ret = -ENOMEM;
goto err;
@@ -192,51 +72,130 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
ret = mtd_device_register(mtd, NULL, 0);
err:
of_node_put(flash_np);
- if (ret)
- kfree(mtd->name);
return ret;
}
+static int func_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
+ u32 mar, reg_offs = fun->mchip_offsets[fun->mchip_number];
+ unsigned int i;
+ const u8 *out;
+ u8 *in;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ mar = (instr->ctx.cmd.opcode << (32 - fun->upm.width)) |
+ reg_offs;
+ fsl_upm_run_pattern(&fun->upm, fun->io_base + reg_offs, mar);
+ fsl_upm_end_pattern(&fun->upm);
+ return 0;
+
+ case NAND_OP_ADDR_INSTR:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ for (i = 0; i < instr->ctx.addr.naddrs; i++) {
+ mar = (instr->ctx.addr.addrs[i] << (32 - fun->upm.width)) |
+ reg_offs;
+ fsl_upm_run_pattern(&fun->upm, fun->io_base + reg_offs, mar);
+ }
+ fsl_upm_end_pattern(&fun->upm);
+ return 0;
+
+ case NAND_OP_DATA_IN_INSTR:
+ in = instr->ctx.data.buf.in;
+ for (i = 0; i < instr->ctx.data.len; i++)
+ in[i] = in_8(fun->io_base + reg_offs);
+ return 0;
+
+ case NAND_OP_DATA_OUT_INSTR:
+ out = instr->ctx.data.buf.out;
+ for (i = 0; i < instr->ctx.data.len; i++)
+ out_8(fun->io_base + reg_offs, out[i]);
+ return 0;
+
+ case NAND_OP_WAITRDY_INSTR:
+ if (!fun->rnb_gpio[fun->mchip_number])
+ return nand_soft_waitrdy(chip, instr->ctx.waitrdy.timeout_ms);
+
+ return nand_gpio_waitrdy(chip, fun->rnb_gpio[fun->mchip_number],
+ instr->ctx.waitrdy.timeout_ms);
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fun_exec_op(struct nand_chip *chip, const struct nand_operation *op,
+ bool check_only)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(nand_to_mtd(chip));
+ unsigned int i;
+ int ret;
+
+ if (op->cs > NAND_MAX_CHIPS)
+ return -EINVAL;
+
+ if (check_only)
+ return 0;
+
+ fun->mchip_number = op->cs;
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = func_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+
+ if (op->instrs[i].delay_ns)
+ ndelay(op->instrs[i].delay_ns);
+ }
+
+ return 0;
+}
+
+static const struct nand_controller_ops fun_ops = {
+ .exec_op = fun_exec_op,
+};
+
static int fun_probe(struct platform_device *ofdev)
{
struct fsl_upm_nand *fun;
- struct resource io_res;
+ struct resource *io_res;
const __be32 *prop;
- int rnb_gpio;
int ret;
int size;
int i;
- fun = kzalloc(sizeof(*fun), GFP_KERNEL);
+ fun = devm_kzalloc(&ofdev->dev, sizeof(*fun), GFP_KERNEL);
if (!fun)
return -ENOMEM;
- ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
- if (ret) {
- dev_err(&ofdev->dev, "can't get IO base\n");
- goto err1;
- }
+ io_res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
+ fun->io_base = devm_ioremap_resource(&ofdev->dev, io_res);
+ if (IS_ERR(fun->io_base))
+ return PTR_ERR(fun->io_base);
- ret = fsl_upm_find(io_res.start, &fun->upm);
+ ret = fsl_upm_find(io_res->start, &fun->upm);
if (ret) {
dev_err(&ofdev->dev, "can't find UPM\n");
- goto err1;
+ return ret;
}
prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
&size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM address offset\n");
- ret = -EINVAL;
- goto err1;
+ return -EINVAL;
}
fun->upm_addr_offset = *prop;
prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM command offset\n");
- ret = -EINVAL;
- goto err1;
+ return -EINVAL;
}
fun->upm_cmd_offset = *prop;
@@ -246,7 +205,7 @@ static int fun_probe(struct platform_device *ofdev)
fun->mchip_count = size / sizeof(uint32_t);
if (fun->mchip_count >= NAND_MAX_CHIPS) {
dev_err(&ofdev->dev, "too much multiple chips\n");
- goto err1;
+ return -EINVAL;
}
for (i = 0; i < fun->mchip_count; i++)
fun->mchip_offsets[i] = be32_to_cpu(prop[i]);
@@ -255,63 +214,26 @@ static int fun_probe(struct platform_device *ofdev)
}
for (i = 0; i < fun->mchip_count; i++) {
- fun->rnb_gpio[i] = -1;
- rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
- if (rnb_gpio >= 0) {
- ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
- if (ret) {
- dev_err(&ofdev->dev,
- "can't request RNB gpio #%d\n", i);
- goto err2;
- }
- gpio_direction_input(rnb_gpio);
- fun->rnb_gpio[i] = rnb_gpio;
- } else if (rnb_gpio == -EINVAL) {
+ fun->rnb_gpio[i] = devm_gpiod_get_index_optional(&ofdev->dev,
+ NULL, i,
+ GPIOD_IN);
+ if (IS_ERR(fun->rnb_gpio[i])) {
dev_err(&ofdev->dev, "RNB gpio #%d is invalid\n", i);
- goto err2;
+ return PTR_ERR(fun->rnb_gpio[i]);
}
}
- prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
- if (prop)
- fun->chip_delay = be32_to_cpup(prop);
- else
- fun->chip_delay = 50;
-
- prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
- if (prop && size == sizeof(uint32_t))
- fun->wait_flags = be32_to_cpup(prop);
- else
- fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
- FSL_UPM_WAIT_WRITE_BYTE;
-
- fun->io_base = devm_ioremap(&ofdev->dev, io_res.start,
- resource_size(&io_res));
- if (!fun->io_base) {
- ret = -ENOMEM;
- goto err2;
- }
-
+ nand_controller_init(&fun->base);
+ fun->base.ops = &fun_ops;
fun->dev = &ofdev->dev;
- fun->last_ctrl = NAND_CLE;
- ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
+ ret = fun_chip_init(fun, ofdev->dev.of_node, io_res);
if (ret)
- goto err2;
+ return ret;
dev_set_drvdata(&ofdev->dev, fun);
return 0;
-err2:
- for (i = 0; i < fun->mchip_count; i++) {
- if (fun->rnb_gpio[i] < 0)
- break;
- gpio_free(fun->rnb_gpio[i]);
- }
-err1:
- kfree(fun);
-
- return ret;
}
static int fun_remove(struct platform_device *ofdev)
@@ -319,20 +241,11 @@ static int fun_remove(struct platform_device *ofdev)
struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
struct nand_chip *chip = &fun->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- int ret, i;
+ int ret;
ret = mtd_device_unregister(mtd);
WARN_ON(ret);
nand_cleanup(chip);
- kfree(mtd->name);
-
- for (i = 0; i < fun->mchip_count; i++) {
- if (fun->rnb_gpio[i] < 0)
- break;
- gpio_free(fun->rnb_gpio[i]);
- }
-
- kfree(fun);
return 0;
}
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 3909752b14c5..92ddc41d0ff0 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -327,8 +327,8 @@ static int fsmc_calc_timings(struct fsmc_nand_data *host,
return 0;
}
-static int fsmc_setup_data_interface(struct nand_chip *nand, int csline,
- const struct nand_data_interface *conf)
+static int fsmc_setup_interface(struct nand_chip *nand, int csline,
+ const struct nand_interface_config *conf)
{
struct fsmc_nand_data *host = nand_to_fsmc(nand);
struct fsmc_nand_timings tims;
@@ -951,7 +951,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
static const struct nand_controller_ops fsmc_nand_controller_ops = {
.attach_chip = fsmc_nand_attach_chip,
.exec_op = fsmc_exec_op,
- .setup_data_interface = fsmc_setup_data_interface,
+ .setup_interface = fsmc_setup_interface,
};
/**
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 938077e5c6a9..3bd847ccc3f3 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -25,8 +25,11 @@
#include <linux/mtd/nand-gpio.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/delay.h>
struct gpiomtd {
+ struct nand_controller base;
+ void __iomem *io;
void __iomem *io_sync;
struct nand_chip nand_chip;
struct gpio_nand_platdata plat;
@@ -69,34 +72,99 @@ static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
#endif
-static void gpio_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
+static int gpio_nand_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(nand_to_mtd(chip));
+ unsigned int i;
- gpio_nand_dosync(gpiomtd);
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->cle, 1);
+ gpio_nand_dosync(gpiomtd);
+ writeb(instr->ctx.cmd.opcode, gpiomtd->io);
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->cle, 0);
+ return 0;
+
+ case NAND_OP_ADDR_INSTR:
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->ale, 1);
+ gpio_nand_dosync(gpiomtd);
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ writeb(instr->ctx.addr.addrs[i], gpiomtd->io);
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->ale, 0);
+ return 0;
+
+ case NAND_OP_DATA_IN_INSTR:
+ gpio_nand_dosync(gpiomtd);
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !instr->ctx.data.force_8bit)
+ ioread16_rep(gpiomtd->io, instr->ctx.data.buf.in,
+ instr->ctx.data.len / 2);
+ else
+ ioread8_rep(gpiomtd->io, instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ return 0;
- if (ctrl & NAND_CTRL_CHANGE) {
- if (gpiomtd->nce)
- gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE));
- gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE));
- gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE));
+ case NAND_OP_DATA_OUT_INSTR:
gpio_nand_dosync(gpiomtd);
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !instr->ctx.data.force_8bit)
+ iowrite16_rep(gpiomtd->io, instr->ctx.data.buf.out,
+ instr->ctx.data.len / 2);
+ else
+ iowrite8_rep(gpiomtd->io, instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ return 0;
+
+ case NAND_OP_WAITRDY_INSTR:
+ if (!gpiomtd->rdy)
+ return nand_soft_waitrdy(chip, instr->ctx.waitrdy.timeout_ms);
+
+ return nand_gpio_waitrdy(chip, gpiomtd->rdy,
+ instr->ctx.waitrdy.timeout_ms);
+
+ default:
+ return -EINVAL;
}
- if (cmd == NAND_CMD_NONE)
- return;
- writeb(cmd, gpiomtd->nand_chip.legacy.IO_ADDR_W);
- gpio_nand_dosync(gpiomtd);
+ return 0;
}
-static int gpio_nand_devready(struct nand_chip *chip)
+static int gpio_nand_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(nand_to_mtd(chip));
+ unsigned int i;
+ int ret = 0;
+
+ if (check_only)
+ return 0;
- return gpiod_get_value(gpiomtd->rdy);
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->nce, 0);
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = gpio_nand_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ break;
+
+ if (op->instrs[i].delay_ns)
+ ndelay(op->instrs[i].delay_ns);
+ }
+ gpio_nand_dosync(gpiomtd);
+ gpiod_set_value(gpiomtd->nce, 1);
+
+ return ret;
}
+static const struct nand_controller_ops gpio_nand_ops = {
+ .exec_op = gpio_nand_exec_op,
+};
+
#ifdef CONFIG_OF
static const struct of_device_id gpio_nand_id_table[] = {
{ .compatible = "gpio-control-nand" },
@@ -225,9 +293,9 @@ static int gpio_nand_probe(struct platform_device *pdev)
chip = &gpiomtd->nand_chip;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- chip->legacy.IO_ADDR_R = devm_ioremap_resource(dev, res);
- if (IS_ERR(chip->legacy.IO_ADDR_R))
- return PTR_ERR(chip->legacy.IO_ADDR_R);
+ gpiomtd->io = devm_ioremap_resource(dev, res);
+ if (IS_ERR(gpiomtd->io))
+ return PTR_ERR(gpiomtd->io);
res = gpio_nand_get_io_sync(pdev);
if (res) {
@@ -269,17 +337,15 @@ static int gpio_nand_probe(struct platform_device *pdev)
ret = PTR_ERR(gpiomtd->rdy);
goto out_ce;
}
- /* Using RDY pin */
- if (gpiomtd->rdy)
- chip->legacy.dev_ready = gpio_nand_devready;
+
+ nand_controller_init(&gpiomtd->base);
+ gpiomtd->base.ops = &gpio_nand_ops;
nand_set_flash_node(chip, pdev->dev.of_node);
- chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_HAMMING;
chip->options = gpiomtd->plat.options;
- chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
- chip->legacy.cmd_ctrl = gpio_nand_cmd_ctrl;
+ chip->controller = &gpiomtd->base;
mtd = nand_to_mtd(chip);
mtd->dev.parent = dev;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 061a8ddda275..5d4aee46cc55 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -736,8 +736,8 @@ static void gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
udelay(dll_wait_time_us);
}
-static int gpmi_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+static int gpmi_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
struct gpmi_nand_data *this = nand_get_controller_data(chip);
const struct nand_sdr_timings *sdr;
@@ -2400,7 +2400,7 @@ unmap:
static const struct nand_controller_ops gpmi_nand_controller_ops = {
.attach_chip = gpmi_nand_attach_chip,
- .setup_data_interface = gpmi_setup_data_interface,
+ .setup_interface = gpmi_setup_interface,
.exec_op = gpmi_nfc_exec_op,
};
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
index 13fea645c7f0..54e377754a6c 100644
--- a/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
@@ -90,8 +90,8 @@ static int jz4740_ecc_calculate(struct ingenic_ecc *ecc,
* If the written data is completely 0xff, we also want to write 0xff as
* ECC, otherwise we will get in trouble when doing subpage writes.
*/
- if (memcmp(ecc_code, empty_block_ecc, ARRAY_SIZE(empty_block_ecc)) == 0)
- memset(ecc_code, 0xff, ARRAY_SIZE(empty_block_ecc));
+ if (memcmp(ecc_code, empty_block_ecc, sizeof(empty_block_ecc)) == 0)
+ memset(ecc_code, 0xff, sizeof(empty_block_ecc));
return 0;
}
diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
index 03866b0aadea..012876e14317 100644
--- a/drivers/mtd/nand/raw/internals.h
+++ b/drivers/mtd/nand/raw/internals.h
@@ -53,12 +53,12 @@ struct nand_manufacturer_ops {
};
/**
- * struct nand_manufacturer - NAND Flash Manufacturer structure
+ * struct nand_manufacturer_desc - NAND Flash Manufacturer descriptor
* @name: Manufacturer name
* @id: manufacturer ID code of device.
* @ops: manufacturer operations
*/
-struct nand_manufacturer {
+struct nand_manufacturer_desc {
int id;
char *name;
const struct nand_manufacturer_ops *ops;
@@ -79,14 +79,21 @@ extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
extern const struct mtd_pairing_scheme dist3_pairing_scheme;
/* Core functions */
-const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+const struct nand_manufacturer_desc *nand_get_manufacturer_desc(u8 id);
int nand_bbm_get_next_page(struct nand_chip *chip, int page);
int nand_markbad_bbm(struct nand_chip *chip, loff_t ofs);
int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
int allowbbt);
-int onfi_fill_data_interface(struct nand_chip *chip,
- enum nand_data_interface_type type,
- int timing_mode);
+void onfi_fill_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface,
+ enum nand_interface_type type,
+ unsigned int timing_mode);
+unsigned int
+onfi_find_closest_sdr_mode(const struct nand_sdr_timings *spec_timings);
+int nand_choose_best_sdr_timings(struct nand_chip *chip,
+ struct nand_interface_config *iface,
+ struct nand_sdr_timings *spec_timings);
+const struct nand_interface_config *nand_get_reset_interface_config(void);
int nand_get_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
int nand_set_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
int nand_read_page_raw_notsupp(struct nand_chip *chip, u8 *buf,
@@ -130,10 +137,10 @@ static inline int nand_exec_op(struct nand_chip *chip,
return chip->controller->ops->exec_op(chip, op, false);
}
-static inline bool nand_has_setup_data_iface(struct nand_chip *chip)
+static inline bool nand_controller_can_setup_interface(struct nand_chip *chip)
{
if (!chip->controller || !chip->controller->ops ||
- !chip->controller->ops->setup_data_interface)
+ !chip->controller->ops->setup_interface)
return false;
if (chip->options & NAND_KEEP_TIMINGS)
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 260a0430313e..8482d3bd8b1f 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -1096,6 +1096,8 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip,
const u8 *oob_buf, bool raw,
int page)
{
+ const struct nand_sdr_timings *sdr =
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
@@ -1141,7 +1143,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip,
return ret;
ret = marvell_nfc_wait_op(chip,
- PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max));
+ PSEC_TO_MSEC(sdr->tPROG_max));
return ret;
}
@@ -1562,6 +1564,8 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip,
const u8 *buf,
int oob_required, int page)
{
+ const struct nand_sdr_timings *sdr =
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct mtd_info *mtd = nand_to_mtd(chip);
const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout;
const u8 *data = buf;
@@ -1598,8 +1602,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip,
marvell_nfc_wait_ndrun(chip);
}
- ret = marvell_nfc_wait_op(chip,
- PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max));
+ ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max));
marvell_nfc_disable_hw_ecc(chip);
@@ -2305,9 +2308,8 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = bbt_mirror_pattern
};
-static int marvell_nfc_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface
- *conf)
+static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
@@ -2508,7 +2510,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops marvell_nand_controller_ops = {
.attach_chip = marvell_nand_attach_chip,
.exec_op = marvell_nfc_exec_op,
- .setup_data_interface = marvell_nfc_setup_data_interface,
+ .setup_interface = marvell_nfc_setup_interface,
};
static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
@@ -2644,7 +2646,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
/*
* Save a reference value for timing registers before
- * ->setup_data_interface() is called.
+ * ->setup_interface() is called.
*/
marvell_nand->ndtr0 = readl_relaxed(nfc->regs + NDTR0);
marvell_nand->ndtr1 = readl_relaxed(nfc->regs + NDTR1);
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3f376471f3f7..0e5829a2b54f 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -573,10 +573,10 @@ static int meson_nfc_write_buf(struct nand_chip *nand, u8 *buf, int len)
static int meson_nfc_rw_cmd_prepare_and_execute(struct nand_chip *nand,
int page, bool in)
{
+ const struct nand_sdr_timings *sdr =
+ nand_get_sdr_timings(nand_get_interface_config(nand));
struct mtd_info *mtd = nand_to_mtd(nand);
struct meson_nfc *nfc = nand_get_controller_data(nand);
- const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&nand->data_interface);
u32 *addrs = nfc->cmdfifo.rw.addrs;
u32 cs = nfc->param.chip_select;
u32 cmd0, cmd_num, row_start;
@@ -626,9 +626,9 @@ static int meson_nfc_rw_cmd_prepare_and_execute(struct nand_chip *nand,
static int meson_nfc_write_page_sub(struct nand_chip *nand,
int page, int raw)
{
- struct mtd_info *mtd = nand_to_mtd(nand);
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&nand->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(nand));
+ struct mtd_info *mtd = nand_to_mtd(nand);
struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
struct meson_nfc *nfc = nand_get_controller_data(nand);
int data_len, info_len;
@@ -1097,8 +1097,8 @@ static int meson_chip_buffer_init(struct nand_chip *nand)
}
static
-int meson_nfc_setup_data_interface(struct nand_chip *nand, int csline,
- const struct nand_data_interface *conf)
+int meson_nfc_setup_interface(struct nand_chip *nand, int csline,
+ const struct nand_interface_config *conf)
{
struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
const struct nand_sdr_timings *timings;
@@ -1222,7 +1222,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
static const struct nand_controller_ops meson_nand_controller_ops = {
.attach_chip = meson_nand_attach_chip,
.detach_chip = meson_nand_detach_chip,
- .setup_data_interface = meson_nfc_setup_data_interface,
+ .setup_interface = meson_nfc_setup_interface,
.exec_op = meson_nfc_exec_op,
};
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index c1a6e31aabb8..ad1b55dab211 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -387,44 +387,6 @@ static int mtk_nfc_hw_runtime_config(struct mtd_info *mtd)
return 0;
}
-static void mtk_nfc_select_chip(struct nand_chip *nand, int chip)
-{
- struct mtk_nfc *nfc = nand_get_controller_data(nand);
- struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(nand);
-
- if (chip < 0)
- return;
-
- mtk_nfc_hw_runtime_config(nand_to_mtd(nand));
-
- nfi_writel(nfc, mtk_nand->sels[chip], NFI_CSEL);
-}
-
-static int mtk_nfc_dev_ready(struct nand_chip *nand)
-{
- struct mtk_nfc *nfc = nand_get_controller_data(nand);
-
- if (nfi_readl(nfc, NFI_STA) & STA_BUSY)
- return 0;
-
- return 1;
-}
-
-static void mtk_nfc_cmd_ctrl(struct nand_chip *chip, int dat,
- unsigned int ctrl)
-{
- struct mtk_nfc *nfc = nand_get_controller_data(chip);
-
- if (ctrl & NAND_ALE) {
- mtk_nfc_send_address(nfc, dat);
- } else if (ctrl & NAND_CLE) {
- mtk_nfc_hw_reset(nfc);
-
- nfi_writew(nfc, CNFG_OP_CUST, NFI_CNFG);
- mtk_nfc_send_command(nfc, dat);
- }
-}
-
static inline void mtk_nfc_wait_ioready(struct mtk_nfc *nfc)
{
int rc;
@@ -501,8 +463,76 @@ static void mtk_nfc_write_buf(struct nand_chip *chip, const u8 *buf, int len)
mtk_nfc_write_byte(chip, buf[i]);
}
-static int mtk_nfc_setup_data_interface(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+static int mtk_nfc_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct mtk_nfc *nfc = nand_get_controller_data(chip);
+ unsigned int i;
+ u32 status;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ mtk_nfc_send_command(nfc, instr->ctx.cmd.opcode);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ mtk_nfc_send_address(nfc, instr->ctx.addr.addrs[i]);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ mtk_nfc_read_buf(chip, instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ mtk_nfc_write_buf(chip, instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ return readl_poll_timeout(nfc->regs + NFI_STA, status,
+ status & STA_BUSY, 20,
+ instr->ctx.waitrdy.timeout_ms);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static void mtk_nfc_select_target(struct nand_chip *nand, unsigned int cs)
+{
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
+ struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(nand);
+
+ mtk_nfc_hw_runtime_config(nand_to_mtd(nand));
+
+ nfi_writel(nfc, mtk_nand->sels[cs], NFI_CSEL);
+}
+
+static int mtk_nfc_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
+{
+ struct mtk_nfc *nfc = nand_get_controller_data(chip);
+ unsigned int i;
+ int ret = 0;
+
+ if (check_only)
+ return 0;
+
+ mtk_nfc_hw_reset(nfc);
+ nfi_writew(nfc, CNFG_OP_CUST, NFI_CNFG);
+ mtk_nfc_select_target(chip, op->cs);
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = mtk_nfc_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int mtk_nfc_setup_interface(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf)
{
struct mtk_nfc *nfc = nand_get_controller_data(chip);
const struct nand_sdr_timings *timings;
@@ -803,6 +833,7 @@ static int mtk_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
u32 reg;
int ret;
+ mtk_nfc_select_target(chip, chip->cur_cs);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
if (!raw) {
@@ -920,6 +951,7 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
u8 *buf;
int rc;
+ mtk_nfc_select_target(chip, chip->cur_cs);
start = data_offs / chip->ecc.size;
end = DIV_ROUND_UP(data_offs + readlen, chip->ecc.size);
@@ -1325,7 +1357,8 @@ static int mtk_nfc_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops mtk_nfc_controller_ops = {
.attach_chip = mtk_nfc_attach_chip,
- .setup_data_interface = mtk_nfc_setup_data_interface,
+ .setup_interface = mtk_nfc_setup_interface,
+ .exec_op = mtk_nfc_exec_op,
};
static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
@@ -1381,13 +1414,6 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand_set_controller_data(nand, nfc);
nand->options |= NAND_USES_DMA | NAND_SUBPAGE_READ;
- nand->legacy.dev_ready = mtk_nfc_dev_ready;
- nand->legacy.select_chip = mtk_nfc_select_chip;
- nand->legacy.write_byte = mtk_nfc_write_byte;
- nand->legacy.write_buf = mtk_nfc_write_buf;
- nand->legacy.read_byte = mtk_nfc_read_byte;
- nand->legacy.read_buf = mtk_nfc_read_buf;
- nand->legacy.cmd_ctrl = mtk_nfc_cmd_ctrl;
/* set default mode in case dt entry is missing */
nand->ecc.mode = NAND_ECC_HW;
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 09dacb83cb5a..a043d76b48cb 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -137,8 +137,8 @@ struct mxc_nand_devtype_data {
u32 (*get_ecc_status)(struct mxc_nand_host *);
const struct mtd_ooblayout_ops *ooblayout;
void (*select_chip)(struct nand_chip *chip, int cs);
- int (*setup_data_interface)(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf);
+ int (*setup_interface)(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf);
void (*enable_hwecc)(struct nand_chip *chip, bool enable);
/*
@@ -1139,8 +1139,8 @@ static void preset_v1(struct mtd_info *mtd)
writew(0x4, NFC_V1_V2_WRPROT);
}
-static int mxc_nand_v2_setup_data_interface(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+static int mxc_nand_v2_setup_interface(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf)
{
struct mxc_nand_host *host = nand_get_controller_data(chip);
int tRC_min_ns, tRC_ps, ret;
@@ -1432,7 +1432,7 @@ static int mxc_nand_get_features(struct nand_chip *chip, int addr,
}
/*
- * The generic flash bbt decriptors overlap with our ecc
+ * The generic flash bbt descriptors overlap with our ecc
* hardware, so define some i.MX specific ones.
*/
static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
@@ -1521,7 +1521,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
.get_ecc_status = get_ecc_status_v2,
.ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v2,
- .setup_data_interface = mxc_nand_v2_setup_data_interface,
+ .setup_interface = mxc_nand_v2_setup_interface,
.enable_hwecc = mxc_nand_enable_hwecc_v1_v2,
.irqpending_quirk = 0,
.needs_ip = 0,
@@ -1738,17 +1738,17 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
return 0;
}
-static int mxcnd_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+static int mxcnd_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
struct mxc_nand_host *host = nand_get_controller_data(chip);
- return host->devtype_data->setup_data_interface(chip, chipnr, conf);
+ return host->devtype_data->setup_interface(chip, chipnr, conf);
}
static const struct nand_controller_ops mxcnd_controller_ops = {
.attach_chip = mxcnd_attach_chip,
- .setup_data_interface = mxcnd_setup_data_interface,
+ .setup_interface = mxcnd_setup_interface,
};
static int mxcnd_probe(struct platform_device *pdev)
@@ -1809,7 +1809,7 @@ static int mxcnd_probe(struct platform_device *pdev)
if (err < 0)
return err;
- if (!host->devtype_data->setup_data_interface)
+ if (!host->devtype_data->setup_interface)
this->options |= NAND_KEEP_TIMINGS;
if (host->devtype_data->needs_ip) {
diff --git a/drivers/mtd/nand/raw/mxic_nand.c b/drivers/mtd/nand/raw/mxic_nand.c
index 57f36721f4c6..d66b5b0971fa 100644
--- a/drivers/mtd/nand/raw/mxic_nand.c
+++ b/drivers/mtd/nand/raw/mxic_nand.c
@@ -451,8 +451,8 @@ static int mxic_nfc_exec_op(struct nand_chip *chip,
return ret;
}
-static int mxic_nfc_setup_data_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+static int mxic_nfc_setup_interface(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf)
{
struct mxic_nand_ctlr *nfc = nand_get_controller_data(chip);
const struct nand_sdr_timings *sdr;
@@ -480,7 +480,7 @@ static int mxic_nfc_setup_data_interface(struct nand_chip *chip, int chipnr,
static const struct nand_controller_ops mxic_nand_controller_ops = {
.exec_op = mxic_nfc_exec_op,
- .setup_data_interface = mxic_nfc_setup_data_interface,
+ .setup_interface = mxic_nfc_setup_interface,
};
static int mxic_nfc_probe(struct platform_device *pdev)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 45124dbb1835..0c768cb88f96 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -773,7 +773,7 @@ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
return -ENOTSUPP;
/* Wait tWB before polling the STATUS reg. */
- timings = nand_get_sdr_timings(&chip->data_interface);
+ timings = nand_get_sdr_timings(nand_get_interface_config(chip));
ndelay(PSEC_TO_NSEC(timings->tWB_max));
ret = nand_status_op(chip, NULL);
@@ -898,7 +898,7 @@ static bool nand_supports_set_features(struct nand_chip *chip, int addr)
}
/**
- * nand_reset_data_interface - Reset data interface and timings
+ * nand_reset_interface - Reset data interface and timings
* @chip: The NAND chip
* @chipnr: Internal die id
*
@@ -906,11 +906,12 @@ static bool nand_supports_set_features(struct nand_chip *chip, int addr)
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
+static int nand_reset_interface(struct nand_chip *chip, int chipnr)
{
+ const struct nand_controller_ops *ops = chip->controller->ops;
int ret;
- if (!nand_has_setup_data_iface(chip))
+ if (!nand_controller_can_setup_interface(chip))
return 0;
/*
@@ -927,9 +928,9 @@ static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
* timings to timing mode 0.
*/
- onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
- ret = chip->controller->ops->setup_data_interface(chip, chipnr,
- &chip->data_interface);
+ chip->current_interface_config = nand_get_reset_interface_config();
+ ret = ops->setup_interface(chip, chipnr,
+ chip->current_interface_config);
if (ret)
pr_err("Failed to configure data interface to SDR timing mode 0\n");
@@ -937,28 +938,36 @@ static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
}
/**
- * nand_setup_data_interface - Setup the best data interface and timings
+ * nand_setup_interface - Setup the best data interface and timings
* @chip: The NAND chip
* @chipnr: Internal die id
*
- * Find and configure the best data interface and NAND timings supported by
- * the chip and the driver.
- * First tries to retrieve supported timing modes from ONFI information,
- * and if the NAND chip does not support ONFI, relies on the
- * ->onfi_timing_mode_default specified in the nand_ids table.
+ * Configure what has been reported to be the best data interface and NAND
+ * timings supported by the chip and the driver.
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
+static int nand_setup_interface(struct nand_chip *chip, int chipnr)
{
- u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
- chip->onfi_timing_mode_default,
- };
+ const struct nand_controller_ops *ops = chip->controller->ops;
+ u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { };
int ret;
- if (!nand_has_setup_data_iface(chip))
+ if (!nand_controller_can_setup_interface(chip))
return 0;
+ /*
+ * A nand_reset_interface() put both the NAND chip and the NAND
+ * controller in timings mode 0. If the default mode for this chip is
+ * also 0, no need to proceed to the change again. Plus, at probe time,
+ * nand_setup_interface() uses ->set/get_features() which would
+ * fail anyway as the parameter page is not available yet.
+ */
+ if (!chip->best_interface_config)
+ return 0;
+
+ tmode_param[0] = chip->best_interface_config->timings.mode;
+
/* Change the mode on the chip side (if supported by the NAND chip) */
if (nand_supports_set_features(chip, ONFI_FEATURE_ADDR_TIMING_MODE)) {
nand_select_target(chip, chipnr);
@@ -970,14 +979,13 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
}
/* Change the mode on the controller side */
- ret = chip->controller->ops->setup_data_interface(chip, chipnr,
- &chip->data_interface);
+ ret = ops->setup_interface(chip, chipnr, chip->best_interface_config);
if (ret)
return ret;
/* Check the mode has been accepted by the chip, if supported */
if (!nand_supports_get_features(chip, ONFI_FEATURE_ADDR_TIMING_MODE))
- return 0;
+ goto update_interface_config;
memset(tmode_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
nand_select_target(chip, chipnr);
@@ -987,12 +995,15 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
if (ret)
goto err_reset_chip;
- if (tmode_param[0] != chip->onfi_timing_mode_default) {
+ if (tmode_param[0] != chip->best_interface_config->timings.mode) {
pr_warn("timing mode %d not acknowledged by the NAND chip\n",
- chip->onfi_timing_mode_default);
+ chip->best_interface_config->timings.mode);
goto err_reset_chip;
}
+update_interface_config:
+ chip->current_interface_config = chip->best_interface_config;
+
return 0;
err_reset_chip:
@@ -1000,7 +1011,7 @@ err_reset_chip:
* Fallback to mode 0 if the chip explicitly did not ack the chosen
* timing mode.
*/
- nand_reset_data_interface(chip, chipnr);
+ nand_reset_interface(chip, chipnr);
nand_select_target(chip, chipnr);
nand_reset_op(chip);
nand_deselect_target(chip);
@@ -1009,62 +1020,93 @@ err_reset_chip:
}
/**
- * nand_init_data_interface - find the best data interface and timings
- * @chip: The NAND chip
- *
- * Find the best data interface and NAND timings supported by the chip
- * and the driver.
- * First tries to retrieve supported timing modes from ONFI information,
- * and if the NAND chip does not support ONFI, relies on the
- * ->onfi_timing_mode_default specified in the nand_ids table. After this
- * function nand_chip->data_interface is initialized with the best timing mode
- * available.
+ * nand_choose_best_sdr_timings - Pick up the best SDR timings that both the
+ * NAND controller and the NAND chip support
+ * @chip: the NAND chip
+ * @iface: the interface configuration (can eventually be updated)
+ * @spec_timings: specific timings, when not fitting the ONFI specification
*
- * Returns 0 for success or negative error code otherwise.
+ * If specific timings are provided, use them. Otherwise, retrieve supported
+ * timing modes from ONFI information.
*/
-static int nand_init_data_interface(struct nand_chip *chip)
+int nand_choose_best_sdr_timings(struct nand_chip *chip,
+ struct nand_interface_config *iface,
+ struct nand_sdr_timings *spec_timings)
{
- int modes, mode, ret;
+ const struct nand_controller_ops *ops = chip->controller->ops;
+ int best_mode = 0, mode, ret;
- if (!nand_has_setup_data_iface(chip))
- return 0;
+ iface->type = NAND_SDR_IFACE;
- /*
- * First try to identify the best timings from ONFI parameters and
- * if the NAND does not support ONFI, fallback to the default ONFI
- * timing mode.
- */
- if (chip->parameters.onfi) {
- modes = chip->parameters.onfi->async_timing_mode;
- } else {
- if (!chip->onfi_timing_mode_default)
- return 0;
+ if (spec_timings) {
+ iface->timings.sdr = *spec_timings;
+ iface->timings.mode = onfi_find_closest_sdr_mode(spec_timings);
- modes = GENMASK(chip->onfi_timing_mode_default, 0);
+ /* Verify the controller supports the requested interface */
+ ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY,
+ iface);
+ if (!ret) {
+ chip->best_interface_config = iface;
+ return ret;
+ }
+
+ /* Fallback to slower modes */
+ best_mode = iface->timings.mode;
+ } else if (chip->parameters.onfi) {
+ best_mode = fls(chip->parameters.onfi->async_timing_mode) - 1;
}
- for (mode = fls(modes) - 1; mode >= 0; mode--) {
- ret = onfi_fill_data_interface(chip, NAND_SDR_IFACE, mode);
- if (ret)
- continue;
+ for (mode = best_mode; mode >= 0; mode--) {
+ onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, mode);
- /*
- * Pass NAND_DATA_IFACE_CHECK_ONLY to only check if the
- * controller supports the requested timings.
- */
- ret = chip->controller->ops->setup_data_interface(chip,
- NAND_DATA_IFACE_CHECK_ONLY,
- &chip->data_interface);
- if (!ret) {
- chip->onfi_timing_mode_default = mode;
+ ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY,
+ iface);
+ if (!ret)
break;
- }
}
+ chip->best_interface_config = iface;
+
return 0;
}
/**
+ * nand_choose_interface_config - find the best data interface and timings
+ * @chip: The NAND chip
+ *
+ * Find the best data interface and NAND timings supported by the chip
+ * and the driver. Eventually let the NAND manufacturer driver propose his own
+ * set of timings.
+ *
+ * After this function nand_chip->interface_config is initialized with the best
+ * timing mode available.
+ *
+ * Returns 0 for success or negative error code otherwise.
+ */
+static int nand_choose_interface_config(struct nand_chip *chip)
+{
+ struct nand_interface_config *iface;
+ int ret;
+
+ if (!nand_controller_can_setup_interface(chip))
+ return 0;
+
+ iface = kzalloc(sizeof(*iface), GFP_KERNEL);
+ if (!iface)
+ return -ENOMEM;
+
+ if (chip->ops.choose_interface_config)
+ ret = chip->ops.choose_interface_config(chip, iface);
+ else
+ ret = nand_choose_best_sdr_timings(chip, iface, NULL);
+
+ if (ret)
+ kfree(iface);
+
+ return ret;
+}
+
+/**
* nand_fill_column_cycles - fill the column cycles of an address
* @chip: The NAND chip
* @addrs: Array of address cycles to fill
@@ -1122,9 +1164,9 @@ static int nand_sp_exec_read_page_op(struct nand_chip *chip, unsigned int page,
unsigned int offset_in_page, void *buf,
unsigned int len)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
+ struct mtd_info *mtd = nand_to_mtd(chip);
u8 addrs[4];
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_READ0, 0),
@@ -1166,7 +1208,7 @@ static int nand_lp_exec_read_page_op(struct nand_chip *chip, unsigned int page,
unsigned int len)
{
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
u8 addrs[5];
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_READ0, 0),
@@ -1263,7 +1305,7 @@ int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_PARAM, 0),
NAND_OP_ADDR(1, &page, PSEC_TO_NSEC(sdr->tWB_max)),
@@ -1318,7 +1360,7 @@ int nand_change_read_column_op(struct nand_chip *chip,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
u8 addrs[2] = {};
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_RNDOUT, 0),
@@ -1392,9 +1434,9 @@ static int nand_exec_prog_page_op(struct nand_chip *chip, unsigned int page,
unsigned int offset_in_page, const void *buf,
unsigned int len, bool prog)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
+ struct mtd_info *mtd = nand_to_mtd(chip);
u8 addrs[5] = {};
struct nand_op_instr instrs[] = {
/*
@@ -1517,7 +1559,7 @@ int nand_prog_page_end_op(struct nand_chip *chip)
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_PAGEPROG,
PSEC_TO_NSEC(sdr->tWB_max)),
@@ -1624,7 +1666,7 @@ int nand_change_write_column_op(struct nand_chip *chip,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
u8 addrs[2];
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_RNDIN, 0),
@@ -1679,7 +1721,7 @@ int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_READID, 0),
NAND_OP_ADDR(1, &addr, PSEC_TO_NSEC(sdr->tADL_min)),
@@ -1718,7 +1760,7 @@ int nand_status_op(struct nand_chip *chip, u8 *status)
{
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_STATUS,
PSEC_TO_NSEC(sdr->tADL_min)),
@@ -1787,7 +1829,7 @@ int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock)
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
u8 addrs[3] = { page, page >> 8, page >> 16 };
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_ERASE1, 0),
@@ -1846,7 +1888,7 @@ static int nand_set_features_op(struct nand_chip *chip, u8 feature,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_SET_FEATURES, 0),
NAND_OP_ADDR(1, &feature, PSEC_TO_NSEC(sdr->tADL_min)),
@@ -1893,7 +1935,7 @@ static int nand_get_features_op(struct nand_chip *chip, u8 feature,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_GET_FEATURES, 0),
NAND_OP_ADDR(1, &feature, PSEC_TO_NSEC(sdr->tWB_max)),
@@ -1950,7 +1992,7 @@ int nand_reset_op(struct nand_chip *chip)
{
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(NAND_CMD_RESET, PSEC_TO_NSEC(sdr->tWB_max)),
NAND_OP_WAIT_RDY(PSEC_TO_MSEC(sdr->tRST_max), 0),
@@ -2480,17 +2522,16 @@ EXPORT_SYMBOL_GPL(nand_subop_get_data_len);
* @chipnr: Internal die id
*
* Save the timings data structure, then apply SDR timings mode 0 (see
- * nand_reset_data_interface for details), do the reset operation, and
- * apply back the previous timings.
+ * nand_reset_interface for details), do the reset operation, and apply
+ * back the previous timings.
*
* Returns 0 on success, a negative error code otherwise.
*/
int nand_reset(struct nand_chip *chip, int chipnr)
{
- struct nand_data_interface saved_data_intf = chip->data_interface;
int ret;
- ret = nand_reset_data_interface(chip, chipnr);
+ ret = nand_reset_interface(chip, chipnr);
if (ret)
return ret;
@@ -2505,18 +2546,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
if (ret)
return ret;
- /*
- * A nand_reset_data_interface() put both the NAND chip and the NAND
- * controller in timings mode 0. If the default mode for this chip is
- * also 0, no need to proceed to the change again. Plus, at probe time,
- * nand_setup_data_interface() uses ->set/get_features() which would
- * fail anyway as the parameter page is not available yet.
- */
- if (!chip->onfi_timing_mode_default)
- return 0;
-
- chip->data_interface = saved_data_intf;
- ret = nand_setup_data_interface(chip, chipnr);
+ ret = nand_setup_interface(chip, chipnr);
if (ret)
return ret;
@@ -3215,10 +3245,10 @@ static int nand_setup_read_retry(struct nand_chip *chip, int retry_mode)
if (retry_mode >= chip->read_retries)
return -EINVAL;
- if (!chip->setup_read_retry)
+ if (!chip->ops.setup_read_retry)
return -EOPNOTSUPP;
- return chip->setup_read_retry(chip, retry_mode);
+ return chip->ops.setup_read_retry(chip, retry_mode);
}
static void nand_wait_readrdy(struct nand_chip *chip)
@@ -3228,7 +3258,7 @@ static void nand_wait_readrdy(struct nand_chip *chip)
if (!(chip->options & NAND_NEED_READRDY))
return;
- sdr = nand_get_sdr_timings(&chip->data_interface);
+ sdr = nand_get_sdr_timings(nand_get_interface_config(chip));
WARN_ON(nand_wait_rdy_op(chip, PSEC_TO_MSEC(sdr->tR_max), 0));
}
@@ -4462,8 +4492,8 @@ static int nand_suspend(struct mtd_info *mtd)
int ret = 0;
mutex_lock(&chip->lock);
- if (chip->suspend)
- ret = chip->suspend(chip);
+ if (chip->ops.suspend)
+ ret = chip->ops.suspend(chip);
if (!ret)
chip->suspended = 1;
mutex_unlock(&chip->lock);
@@ -4481,8 +4511,8 @@ static void nand_resume(struct mtd_info *mtd)
mutex_lock(&chip->lock);
if (chip->suspended) {
- if (chip->resume)
- chip->resume(chip);
+ if (chip->ops.resume)
+ chip->ops.resume(chip);
chip->suspended = 0;
} else {
pr_err("%s called for a chip which is not in suspended state\n",
@@ -4511,10 +4541,10 @@ static int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- if (!chip->lock_area)
+ if (!chip->ops.lock_area)
return -ENOTSUPP;
- return chip->lock_area(chip, ofs, len);
+ return chip->ops.lock_area(chip, ofs, len);
}
/**
@@ -4527,10 +4557,10 @@ static int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- if (!chip->unlock_area)
+ if (!chip->ops.unlock_area)
return -ENOTSUPP;
- return chip->unlock_area(chip, ofs, len);
+ return chip->ops.unlock_area(chip, ofs, len);
}
/* Set default functions */
@@ -4743,8 +4773,6 @@ static bool find_full_id_nand(struct nand_chip *chip,
chip->options |= type->options;
chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
chip->base.eccreq.step_size = NAND_ECC_STEP(type);
- chip->onfi_timing_mode_default =
- type->onfi_timing_mode_default;
chip->parameters.model = kstrdup(type->name, GFP_KERNEL);
if (!chip->parameters.model)
@@ -4810,9 +4838,9 @@ static void nand_manufacturer_cleanup(struct nand_chip *chip)
}
static const char *
-nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
+nand_manufacturer_name(const struct nand_manufacturer_desc *manufacturer_desc)
{
- return manufacturer ? manufacturer->name : "Unknown";
+ return manufacturer_desc ? manufacturer_desc->name : "Unknown";
}
/*
@@ -4820,7 +4848,7 @@ nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
*/
static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
{
- const struct nand_manufacturer *manufacturer;
+ const struct nand_manufacturer_desc *manufacturer_desc;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
int busw, ret;
@@ -4877,8 +4905,8 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
chip->id.len = nand_id_len(id_data, ARRAY_SIZE(chip->id.data));
/* Try to identify manufacturer */
- manufacturer = nand_get_manufacturer(maf_id);
- chip->manufacturer.desc = manufacturer;
+ manufacturer_desc = nand_get_manufacturer_desc(maf_id);
+ chip->manufacturer.desc = manufacturer_desc;
if (!type)
type = nand_flash_ids;
@@ -4957,7 +4985,7 @@ ident_done:
*/
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
maf_id, dev_id);
- pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
+ pr_info("%s %s\n", nand_manufacturer_name(manufacturer_desc),
mtd->name);
pr_warn("bus width %d instead of %d bits\n", busw ? 16 : 8,
(chip->options & NAND_BUSWIDTH_16) ? 16 : 8);
@@ -4992,7 +5020,7 @@ ident_done:
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
maf_id, dev_id);
- pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
+ pr_info("%s %s\n", nand_manufacturer_name(manufacturer_desc),
chip->parameters.model);
pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(targetsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
@@ -5185,7 +5213,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
mutex_init(&chip->lock);
/* Enforce the right timings for reset/detection */
- onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
+ chip->current_interface_config = nand_get_reset_interface_config();
ret = nand_dt_init(chip);
if (ret)
@@ -5972,16 +6000,16 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!mtd->bitflip_threshold)
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
- /* Initialize the ->data_interface field. */
- ret = nand_init_data_interface(chip);
+ /* Find the fastest data interface for this chip */
+ ret = nand_choose_interface_config(chip);
if (ret)
goto err_nanddev_cleanup;
/* Enter fastest possible mode on all dies. */
for (i = 0; i < nanddev_ntargets(&chip->base); i++) {
- ret = nand_setup_data_interface(chip, i);
+ ret = nand_setup_interface(chip, i);
if (ret)
- goto err_nanddev_cleanup;
+ goto err_free_interface_config;
}
/* Check, if we should skip the bad block table scan */
@@ -5991,10 +6019,12 @@ static int nand_scan_tail(struct nand_chip *chip)
/* Build bad block table */
ret = nand_create_bbt(chip);
if (ret)
- goto err_nanddev_cleanup;
+ goto err_free_interface_config;
return 0;
+err_free_interface_config:
+ kfree(chip->best_interface_config);
err_nanddev_cleanup:
nanddev_cleanup(&chip->base);
@@ -6088,6 +6118,9 @@ void nand_cleanup(struct nand_chip *chip)
& NAND_BBT_DYNAMICSTRUCT)
kfree(chip->badblock_pattern);
+ /* Free the data interface */
+ kfree(chip->best_interface_config);
+
/* Free manufacturer priv data. */
nand_manufacturer_cleanup(chip);
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 96045d60471e..344a24fd2ca8 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -1226,7 +1226,7 @@ static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd)
return -ENOMEM;
/*
- * If no primary table decriptor is given, scan the device to build a
+ * If no primary table descriptor is given, scan the device to build a
* memory based bad block table.
*/
if (!td) {
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 7caedaa5b9e5..6d08eb834456 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -337,7 +337,7 @@ static int hynix_mlc_1xnm_rr_init(struct nand_chip *chip,
rr->nregs = nregs;
rr->regs = hynix_1xnm_mlc_read_retry_regs;
hynix->read_retry = rr;
- chip->setup_read_retry = hynix_nand_setup_read_retry;
+ chip->ops.setup_read_retry = hynix_nand_setup_read_retry;
chip->read_retries = nmodes;
out:
@@ -673,6 +673,15 @@ static void hynix_nand_cleanup(struct nand_chip *chip)
nand_set_manufacturer_data(chip, NULL);
}
+static int
+h27ucg8t2atrbc_choose_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface)
+{
+ onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
+
+ return nand_choose_best_sdr_timings(chip, iface, NULL);
+}
+
static int hynix_nand_init(struct nand_chip *chip)
{
struct hynix_nand *hynix;
@@ -689,6 +698,11 @@ static int hynix_nand_init(struct nand_chip *chip)
nand_set_manufacturer_data(chip, hynix);
+ if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model,
+ sizeof("H27UCG8T2ATR-BC") - 1))
+ chip->ops.choose_interface_config =
+ h27ucg8t2atrbc_choose_interface_config;
+
ret = hynix_nand_rr_init(chip);
if (ret)
hynix_nand_cleanup(chip);
diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index ba27902fc54b..b9945791a9d7 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -28,8 +28,7 @@ struct nand_flash_dev nand_flash_ids[] = {
*/
{"TC58NVG0S3E 1G 3.3V 8-bit",
{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
- SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512),
- 2 },
+ SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
{"TC58NVG2S0F 4G 3.3V 8-bit",
{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
@@ -51,7 +50,10 @@ struct nand_flash_dev nand_flash_ids[] = {
{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
- NAND_ECC_INFO(40, SZ_1K), 4 },
+ NAND_ECC_INFO(40, SZ_1K) },
+ {"TH58NVG2S3HBAI4 4G 3.3V 8-bit",
+ { .id = {0x98, 0xdc, 0x91, 0x15, 0x76} },
+ SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
@@ -166,7 +168,7 @@ struct nand_flash_dev nand_flash_ids[] = {
};
/* Manufacturer IDs */
-static const struct nand_manufacturer nand_manufacturers[] = {
+static const struct nand_manufacturer_desc nand_manufacturer_descs[] = {
{NAND_MFR_AMD, "AMD/Spansion", &amd_nand_manuf_ops},
{NAND_MFR_ATO, "ATO"},
{NAND_MFR_EON, "Eon"},
@@ -186,20 +188,20 @@ static const struct nand_manufacturer nand_manufacturers[] = {
};
/**
- * nand_get_manufacturer - Get manufacturer information from the manufacturer
- * ID
+ * nand_get_manufacturer_desc - Get manufacturer information from the
+ * manufacturer ID
* @id: manufacturer ID
*
- * Returns a pointer a nand_manufacturer object if the manufacturer is defined
+ * Returns a nand_manufacturer_desc object if the manufacturer is defined
* in the NAND manufacturers database, NULL otherwise.
*/
-const struct nand_manufacturer *nand_get_manufacturer(u8 id)
+const struct nand_manufacturer_desc *nand_get_manufacturer_desc(u8 id)
{
int i;
- for (i = 0; i < ARRAY_SIZE(nand_manufacturers); i++)
- if (nand_manufacturers[i].id == id)
- return &nand_manufacturers[i];
+ for (i = 0; i < ARRAY_SIZE(nand_manufacturer_descs); i++)
+ if (nand_manufacturer_descs[i].id == id)
+ return &nand_manufacturer_descs[i];
return NULL;
}
diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c
index d64791c06a97..2bcc03714432 100644
--- a/drivers/mtd/nand/raw/nand_legacy.c
+++ b/drivers/mtd/nand/raw/nand_legacy.c
@@ -354,6 +354,9 @@ static void nand_command(struct nand_chip *chip, unsigned int command,
static void nand_ccs_delay(struct nand_chip *chip)
{
+ const struct nand_sdr_timings *sdr =
+ nand_get_sdr_timings(nand_get_interface_config(chip));
+
/*
* The controller already takes care of waiting for tCCS when the RNDIN
* or RNDOUT command is sent, return directly.
@@ -365,8 +368,8 @@ static void nand_ccs_delay(struct nand_chip *chip)
* Wait tCCS_min if it is correctly defined, otherwise wait 500ns
* (which should be safe for all NANDs).
*/
- if (nand_has_setup_data_iface(chip))
- ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000);
+ if (nand_controller_can_setup_interface(chip))
+ ndelay(sdr->tCCS_min / 1000);
else
ndelay(500);
}
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 09c254c97b5c..1472f925f386 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -130,7 +130,7 @@ static void macronix_nand_onfi_init(struct nand_chip *chip)
return;
chip->read_retries = MACRONIX_NUM_READ_RETRY_MODES;
- chip->setup_read_retry = macronix_nand_setup_read_retry;
+ chip->ops.setup_read_retry = macronix_nand_setup_read_retry;
if (p->supports_set_get_features) {
bitmap_set(p->set_feature_list,
@@ -242,8 +242,8 @@ static void macronix_nand_block_protection_support(struct nand_chip *chip)
bitmap_set(chip->parameters.set_feature_list,
ONFI_FEATURE_ADDR_MXIC_PROTECTION, 1);
- chip->lock_area = mxic_nand_lock;
- chip->unlock_area = mxic_nand_unlock;
+ chip->ops.lock_area = mxic_nand_lock;
+ chip->ops.unlock_area = mxic_nand_unlock;
}
static int nand_power_down_op(struct nand_chip *chip)
@@ -312,8 +312,8 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip)
if (i < 0)
return;
- chip->suspend = mxic_nand_suspend;
- chip->resume = mxic_nand_resume;
+ chip->ops.suspend = mxic_nand_suspend;
+ chip->ops.resume = mxic_nand_resume;
}
static int macronix_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 3589b4fce0d4..4385092a9325 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -84,7 +84,7 @@ static int micron_nand_onfi_init(struct nand_chip *chip)
struct nand_onfi_vendor_micron *micron = (void *)p->onfi->vendor;
chip->read_retries = micron->read_retry_options;
- chip->setup_read_retry = micron_nand_setup_read_retry;
+ chip->ops.setup_read_retry = micron_nand_setup_read_retry;
}
if (p->supports_set_get_features) {
diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
index 36d21be3dfe5..94d832646487 100644
--- a/drivers/mtd/nand/raw/nand_timings.c
+++ b/drivers/mtd/nand/raw/nand_timings.c
@@ -12,7 +12,14 @@
#define ONFI_DYN_TIMING_MAX U16_MAX
-static const struct nand_data_interface onfi_sdr_timings[] = {
+/*
+ * For non-ONFI chips we use the highest possible value for tPROG and tBERS.
+ * tR and tCCS will take the default values precised in the ONFI specification
+ * for timing mode 0, respectively 200us and 500ns.
+ *
+ * These four values are tweaked to be more accurate in the case of ONFI chips.
+ */
+static const struct nand_interface_config onfi_sdr_timings[] = {
/* Mode 0 */
{
.type = NAND_SDR_IFACE,
@@ -20,6 +27,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 20000,
.tALS_min = 50000,
@@ -63,6 +72,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 10000,
.tALS_min = 25000,
@@ -106,6 +117,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 10000,
.tALS_min = 15000,
@@ -149,6 +162,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 5000,
.tALS_min = 10000,
@@ -192,6 +207,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 5000,
.tALS_min = 10000,
@@ -235,6 +252,8 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.timings.sdr = {
.tCCS_min = 500000,
.tR_max = 200000000,
+ .tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+ .tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
.tADL_min = 400000,
.tALH_min = 5000,
.tALS_min = 10000,
@@ -273,23 +292,79 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
},
};
+/* All NAND chips share the same reset data interface: SDR mode 0 */
+const struct nand_interface_config *nand_get_reset_interface_config(void)
+{
+ return &onfi_sdr_timings[0];
+}
+
+/**
+ * onfi_find_closest_sdr_mode - Derive the closest ONFI SDR timing mode given a
+ * set of timings
+ * @spec_timings: the timings to challenge
+ */
+unsigned int
+onfi_find_closest_sdr_mode(const struct nand_sdr_timings *spec_timings)
+{
+ const struct nand_sdr_timings *onfi_timings;
+ int mode;
+
+ for (mode = ARRAY_SIZE(onfi_sdr_timings) - 1; mode > 0; mode--) {
+ onfi_timings = &onfi_sdr_timings[mode].timings.sdr;
+
+ if (spec_timings->tCCS_min <= onfi_timings->tCCS_min &&
+ spec_timings->tADL_min <= onfi_timings->tADL_min &&
+ spec_timings->tALH_min <= onfi_timings->tALH_min &&
+ spec_timings->tALS_min <= onfi_timings->tALS_min &&
+ spec_timings->tAR_min <= onfi_timings->tAR_min &&
+ spec_timings->tCEH_min <= onfi_timings->tCEH_min &&
+ spec_timings->tCH_min <= onfi_timings->tCH_min &&
+ spec_timings->tCLH_min <= onfi_timings->tCLH_min &&
+ spec_timings->tCLR_min <= onfi_timings->tCLR_min &&
+ spec_timings->tCLS_min <= onfi_timings->tCLS_min &&
+ spec_timings->tCOH_min <= onfi_timings->tCOH_min &&
+ spec_timings->tCS_min <= onfi_timings->tCS_min &&
+ spec_timings->tDH_min <= onfi_timings->tDH_min &&
+ spec_timings->tDS_min <= onfi_timings->tDS_min &&
+ spec_timings->tIR_min <= onfi_timings->tIR_min &&
+ spec_timings->tRC_min <= onfi_timings->tRC_min &&
+ spec_timings->tREH_min <= onfi_timings->tREH_min &&
+ spec_timings->tRHOH_min <= onfi_timings->tRHOH_min &&
+ spec_timings->tRHW_min <= onfi_timings->tRHW_min &&
+ spec_timings->tRLOH_min <= onfi_timings->tRLOH_min &&
+ spec_timings->tRP_min <= onfi_timings->tRP_min &&
+ spec_timings->tRR_min <= onfi_timings->tRR_min &&
+ spec_timings->tWC_min <= onfi_timings->tWC_min &&
+ spec_timings->tWH_min <= onfi_timings->tWH_min &&
+ spec_timings->tWHR_min <= onfi_timings->tWHR_min &&
+ spec_timings->tWP_min <= onfi_timings->tWP_min &&
+ spec_timings->tWW_min <= onfi_timings->tWW_min)
+ return mode;
+ }
+
+ return 0;
+}
+
/**
- * onfi_fill_data_interface - [NAND Interface] Initialize a data interface from
- * given ONFI mode
- * @mode: The ONFI timing mode
+ * onfi_fill_interface_config - Initialize an interface config from a given
+ * ONFI mode
+ * @chip: The NAND chip
+ * @iface: The interface configuration to fill
+ * @type: The interface type
+ * @timing_mode: The ONFI timing mode
*/
-int onfi_fill_data_interface(struct nand_chip *chip,
- enum nand_data_interface_type type,
- int timing_mode)
+void onfi_fill_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface,
+ enum nand_interface_type type,
+ unsigned int timing_mode)
{
- struct nand_data_interface *iface = &chip->data_interface;
struct onfi_params *onfi = chip->parameters.onfi;
- if (type != NAND_SDR_IFACE)
- return -EINVAL;
+ if (WARN_ON(type != NAND_SDR_IFACE))
+ return;
- if (timing_mode < 0 || timing_mode >= ARRAY_SIZE(onfi_sdr_timings))
- return -EINVAL;
+ if (WARN_ON(timing_mode >= ARRAY_SIZE(onfi_sdr_timings)))
+ return;
*iface = onfi_sdr_timings[timing_mode];
@@ -308,22 +383,5 @@ int onfi_fill_data_interface(struct nand_chip *chip,
/* nanoseconds -> picoseconds */
timings->tCCS_min = 1000UL * onfi->tCCS;
- } else {
- struct nand_sdr_timings *timings = &iface->timings.sdr;
- /*
- * For non-ONFI chips we use the highest possible value for
- * tPROG and tBERS. tR and tCCS will take the default values
- * precised in the ONFI specification for timing mode 0,
- * respectively 200us and 500ns.
- */
-
- /* microseconds -> picoseconds */
- timings->tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
- timings->tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
-
- timings->tR_max = 200000000;
- timings->tCCS_min = 500000;
}
-
- return 0;
}
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index ae069905d7e4..f746c19f3b2c 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -33,7 +33,7 @@ static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
if (nand_has_exec_op(chip)) {
const struct nand_sdr_timings *sdr =
- nand_get_sdr_timings(&chip->data_interface);
+ nand_get_sdr_timings(nand_get_interface_config(chip));
struct nand_op_instr instrs[] = {
NAND_OP_CMD(TOSHIBA_NAND_CMD_ECC_STATUS_READ,
PSEC_TO_NSEC(sdr->tADL_min)),
@@ -194,17 +194,79 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
}
}
+static int
+tc58teg5dclta00_choose_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface)
+{
+ onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 5);
+
+ return nand_choose_best_sdr_timings(chip, iface, NULL);
+}
+
+static int
+tc58nvg0s3e_choose_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface)
+{
+ onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 2);
+
+ return nand_choose_best_sdr_timings(chip, iface, NULL);
+}
+
+static int
+th58nvg2s3hbai4_choose_interface_config(struct nand_chip *chip,
+ struct nand_interface_config *iface)
+{
+ struct nand_sdr_timings *sdr = &iface->timings.sdr;
+
+ /* Start with timings from the closest timing mode, mode 4. */
+ onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
+
+ /* Patch timings that differ from mode 4. */
+ sdr->tALS_min = 12000;
+ sdr->tCHZ_max = 20000;
+ sdr->tCLS_min = 12000;
+ sdr->tCOH_min = 0;
+ sdr->tDS_min = 12000;
+ sdr->tRHOH_min = 25000;
+ sdr->tRHW_min = 30000;
+ sdr->tRHZ_max = 60000;
+ sdr->tWHR_min = 60000;
+
+ /* Patch timings not part of onfi timing mode. */
+ sdr->tPROG_max = 700000000;
+ sdr->tBERS_max = 5000000000;
+
+ return nand_choose_best_sdr_timings(chip, iface, sdr);
+}
+
static int tc58teg5dclta00_init(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- chip->onfi_timing_mode_default = 5;
+ chip->ops.choose_interface_config =
+ &tc58teg5dclta00_choose_interface_config;
chip->options |= NAND_NEED_SCRAMBLING;
mtd_set_pairing_scheme(mtd, &dist3_pairing_scheme);
return 0;
}
+static int tc58nvg0s3e_init(struct nand_chip *chip)
+{
+ chip->ops.choose_interface_config =
+ &tc58nvg0s3e_choose_interface_config;
+
+ return 0;
+}
+
+static int th58nvg2s3hbai4_init(struct nand_chip *chip)
+{
+ chip->ops.choose_interface_config =
+ &th58nvg2s3hbai4_choose_interface_config;
+
+ return 0;
+}
+
static int toshiba_nand_init(struct nand_chip *chip)
{
if (nand_is_slc(chip))
@@ -217,6 +279,12 @@ static int toshiba_nand_init(struct nand_chip *chip)
if (!strcmp("TC58TEG5DCLTA00", chip->parameters.model))
tc58teg5dclta00_init(chip);
+ if (!strncmp("TC58NVG0S3E", chip->parameters.model,
+ sizeof("TC58NVG0S3E") - 1))
+ tc58nvg0s3e_init(chip);
+ if (!strncmp("TH58NVG2S3HBAI4", chip->parameters.model,
+ sizeof("TH58NVG2S3HBAI4") - 1))
+ th58nvg2s3hbai4_init(chip);
return 0;
}
diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c
index 078b1022ac2a..4b799521a427 100644
--- a/drivers/mtd/nand/raw/omap_elm.c
+++ b/drivers/mtd/nand/raw/omap_elm.c
@@ -2,7 +2,7 @@
/*
* Error Location Module
*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*/
#define DRIVER_NAME "omap-elm"
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f1daf330951b..bd7a7251429b 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -459,11 +459,13 @@ struct qcom_nand_host {
* among different NAND controllers.
* @ecc_modes - ecc mode for NAND
* @is_bam - whether NAND controller is using BAM
+ * @is_qpic - whether NAND CTRL is part of qpic IP
* @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
*/
struct qcom_nandc_props {
u32 ecc_modes;
bool is_bam;
+ bool is_qpic;
u32 dev_cmd_reg_start;
};
@@ -2774,14 +2776,24 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
u32 nand_ctrl;
/* kill onenand */
- nandc_write(nandc, SFLASHC_BURST_CFG, 0);
+ if (!nandc->props->is_qpic)
+ nandc_write(nandc, SFLASHC_BURST_CFG, 0);
nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD),
NAND_DEV_CMD_VLD_VAL);
/* enable ADM or BAM DMA */
if (nandc->props->is_bam) {
nand_ctrl = nandc_read(nandc, NAND_CTRL);
- nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
+
+ /*
+ *NAND_CTRL is an operational registers, and CPU
+ * access to operational registers are read only
+ * in BAM mode. So update the NAND_CTRL register
+ * only if it is not in BAM mode. In most cases BAM
+ * mode will be enabled in bootloader
+ */
+ if (!(nand_ctrl & BAM_MODE_EN))
+ nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
} else {
nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
}
@@ -3035,12 +3047,14 @@ static const struct qcom_nandc_props ipq806x_nandc_props = {
static const struct qcom_nandc_props ipq4019_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
.is_bam = true,
+ .is_qpic = true,
.dev_cmd_reg_start = 0x0,
};
static const struct qcom_nandc_props ipq8074_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
.is_bam = true,
+ .is_qpic = true,
.dev_cmd_reg_start = 0x7000,
};
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index d0dd0c446e4d..105522205979 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -808,8 +808,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
return -ENODEV;
}
-static int s3c2410_nand_setup_data_interface(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+static int s3c2410_nand_setup_interface(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -999,7 +999,7 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops s3c24xx_nand_controller_ops = {
.attach_chip = s3c2410_nand_attach_chip,
- .setup_data_interface = s3c2410_nand_setup_data_interface,
+ .setup_interface = s3c2410_nand_setup_interface,
};
static const struct of_device_id s3c24xx_nand_dt_ids[] = {
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 65c9d17b25a3..7f4546ae9130 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -11,10 +11,13 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/mtd/rawnand.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
/* Bad block marker length */
@@ -242,7 +245,8 @@ struct stm32_fmc2_nfc {
struct nand_controller base;
struct stm32_fmc2_nand nand;
struct device *dev;
- void __iomem *io_base;
+ struct device *cdev;
+ struct regmap *regmap;
void __iomem *data_base[FMC2_MAX_CE];
void __iomem *cmd_base[FMC2_MAX_CE];
void __iomem *addr_base[FMC2_MAX_CE];
@@ -277,40 +281,37 @@ static void stm32_fmc2_nfc_timings_init(struct nand_chip *chip)
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct stm32_fmc2_nand *nand = to_fmc2_nand(chip);
struct stm32_fmc2_timings *timings = &nand->timings;
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
u32 pmem, patt;
/* Set tclr/tar timings */
- pcr &= ~FMC2_PCR_TCLR;
- pcr |= FIELD_PREP(FMC2_PCR_TCLR, timings->tclr);
- pcr &= ~FMC2_PCR_TAR;
- pcr |= FIELD_PREP(FMC2_PCR_TAR, timings->tar);
+ regmap_update_bits(nfc->regmap, FMC2_PCR,
+ FMC2_PCR_TCLR | FMC2_PCR_TAR,
+ FIELD_PREP(FMC2_PCR_TCLR, timings->tclr) |
+ FIELD_PREP(FMC2_PCR_TAR, timings->tar));
/* Set tset/twait/thold/thiz timings in common bank */
pmem = FIELD_PREP(FMC2_PMEM_MEMSET, timings->tset_mem);
pmem |= FIELD_PREP(FMC2_PMEM_MEMWAIT, timings->twait);
pmem |= FIELD_PREP(FMC2_PMEM_MEMHOLD, timings->thold_mem);
pmem |= FIELD_PREP(FMC2_PMEM_MEMHIZ, timings->thiz);
+ regmap_write(nfc->regmap, FMC2_PMEM, pmem);
/* Set tset/twait/thold/thiz timings in attribut bank */
patt = FIELD_PREP(FMC2_PATT_ATTSET, timings->tset_att);
patt |= FIELD_PREP(FMC2_PATT_ATTWAIT, timings->twait);
patt |= FIELD_PREP(FMC2_PATT_ATTHOLD, timings->thold_att);
patt |= FIELD_PREP(FMC2_PATT_ATTHIZ, timings->thiz);
-
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
- writel_relaxed(pmem, nfc->io_base + FMC2_PMEM);
- writel_relaxed(patt, nfc->io_base + FMC2_PATT);
+ regmap_write(nfc->regmap, FMC2_PATT, patt);
}
static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
{
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ u32 pcr = 0, pcr_mask;
/* Configure ECC algorithm (default configuration is Hamming) */
- pcr &= ~FMC2_PCR_ECCALG;
- pcr &= ~FMC2_PCR_BCHECC;
+ pcr_mask = FMC2_PCR_ECCALG;
+ pcr_mask |= FMC2_PCR_BCHECC;
if (chip->ecc.strength == FMC2_ECC_BCH8) {
pcr |= FMC2_PCR_ECCALG;
pcr |= FMC2_PCR_BCHECC;
@@ -319,15 +320,15 @@ static void stm32_fmc2_nfc_setup(struct nand_chip *chip)
}
/* Set buswidth */
- pcr &= ~FMC2_PCR_PWID;
+ pcr_mask |= FMC2_PCR_PWID;
if (chip->options & NAND_BUSWIDTH_16)
pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
/* Set ECC sector size */
- pcr &= ~FMC2_PCR_ECCSS;
+ pcr_mask |= FMC2_PCR_ECCSS;
pcr |= FIELD_PREP(FMC2_PCR_ECCSS, FMC2_PCR_ECCSS_512);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, pcr_mask, pcr);
}
static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
@@ -393,81 +394,63 @@ static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
static void stm32_fmc2_nfc_set_buswidth_16(struct stm32_fmc2_nfc *nfc, bool set)
{
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ u32 pcr;
- pcr &= ~FMC2_PCR_PWID;
- if (set)
- pcr |= FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ pcr = set ? FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_16) :
+ FIELD_PREP(FMC2_PCR_PWID, FMC2_PCR_PWID_BUSWIDTH_8);
+
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_PWID, pcr);
}
static void stm32_fmc2_nfc_set_ecc(struct stm32_fmc2_nfc *nfc, bool enable)
{
- u32 pcr = readl(nfc->io_base + FMC2_PCR);
-
- pcr &= ~FMC2_PCR_ECCEN;
- if (enable)
- pcr |= FMC2_PCR_ECCEN;
- writel(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_ECCEN,
+ enable ? FMC2_PCR_ECCEN : 0);
}
-static inline void stm32_fmc2_nfc_enable_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_enable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
-
- csqier |= FMC2_CSQIER_TCIE;
-
nfc->irq_state = FMC2_IRQ_SEQ;
- writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
+ regmap_update_bits(nfc->regmap, FMC2_CSQIER,
+ FMC2_CSQIER_TCIE, FMC2_CSQIER_TCIE);
}
-static inline void stm32_fmc2_nfc_disable_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_disable_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 csqier = readl_relaxed(nfc->io_base + FMC2_CSQIER);
-
- csqier &= ~FMC2_CSQIER_TCIE;
-
- writel_relaxed(csqier, nfc->io_base + FMC2_CSQIER);
+ regmap_update_bits(nfc->regmap, FMC2_CSQIER, FMC2_CSQIER_TCIE, 0);
nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_nfc_clear_seq_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_clear_seq_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_CSQICR_CLEAR_IRQ, nfc->io_base + FMC2_CSQICR);
+ regmap_write(nfc->regmap, FMC2_CSQICR, FMC2_CSQICR_CLEAR_IRQ);
}
-static inline void stm32_fmc2_nfc_enable_bch_irq(struct stm32_fmc2_nfc *nfc,
- int mode)
+static void stm32_fmc2_nfc_enable_bch_irq(struct stm32_fmc2_nfc *nfc, int mode)
{
- u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
+ nfc->irq_state = FMC2_IRQ_BCH;
if (mode == NAND_ECC_WRITE)
- bchier |= FMC2_BCHIER_EPBRIE;
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_EPBRIE, FMC2_BCHIER_EPBRIE);
else
- bchier |= FMC2_BCHIER_DERIE;
-
- nfc->irq_state = FMC2_IRQ_BCH;
-
- writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_DERIE, FMC2_BCHIER_DERIE);
}
-static inline void stm32_fmc2_nfc_disable_bch_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_disable_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- u32 bchier = readl_relaxed(nfc->io_base + FMC2_BCHIER);
-
- bchier &= ~FMC2_BCHIER_DERIE;
- bchier &= ~FMC2_BCHIER_EPBRIE;
-
- writel_relaxed(bchier, nfc->io_base + FMC2_BCHIER);
+ regmap_update_bits(nfc->regmap, FMC2_BCHIER,
+ FMC2_BCHIER_DERIE | FMC2_BCHIER_EPBRIE, 0);
nfc->irq_state = FMC2_IRQ_UNKNOWN;
}
-static inline void stm32_fmc2_nfc_clear_bch_irq(struct stm32_fmc2_nfc *nfc)
+static void stm32_fmc2_nfc_clear_bch_irq(struct stm32_fmc2_nfc *nfc)
{
- writel_relaxed(FMC2_BCHICR_CLEAR_IRQ, nfc->io_base + FMC2_BCHICR);
+ regmap_write(nfc->regmap, FMC2_BCHICR, FMC2_BCHICR_CLEAR_IRQ);
}
/*
@@ -481,13 +464,8 @@ static void stm32_fmc2_nfc_hwctl(struct nand_chip *chip, int mode)
stm32_fmc2_nfc_set_ecc(nfc, false);
if (chip->ecc.strength != FMC2_ECC_HAM) {
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
-
- if (mode == NAND_ECC_WRITE)
- pcr |= FMC2_PCR_WEN;
- else
- pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_WEN,
+ mode == NAND_ECC_WRITE ? FMC2_PCR_WEN : 0);
reinit_completion(&nfc->complete);
stm32_fmc2_nfc_clear_bch_irq(nfc);
@@ -502,7 +480,7 @@ static void stm32_fmc2_nfc_hwctl(struct nand_chip *chip, int mode)
* ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
-static inline void stm32_fmc2_nfc_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
+static void stm32_fmc2_nfc_ham_set_ecc(const u32 ecc_sta, u8 *ecc)
{
ecc[0] = ecc_sta;
ecc[1] = ecc_sta >> 8;
@@ -516,15 +494,15 @@ static int stm32_fmc2_nfc_ham_calculate(struct nand_chip *chip, const u8 *data,
u32 sr, heccr;
int ret;
- ret = readl_relaxed_poll_timeout(nfc->io_base + FMC2_SR,
- sr, sr & FMC2_SR_NWRF, 1,
- 1000 * FMC2_TIMEOUT_MS);
+ ret = regmap_read_poll_timeout(nfc->regmap, FMC2_SR, sr,
+ sr & FMC2_SR_NWRF, 1,
+ 1000 * FMC2_TIMEOUT_MS);
if (ret) {
dev_err(nfc->dev, "ham timeout\n");
return ret;
}
- heccr = readl_relaxed(nfc->io_base + FMC2_HECCR);
+ regmap_read(nfc->regmap, FMC2_HECCR, &heccr);
stm32_fmc2_nfc_ham_set_ecc(heccr, ecc);
stm32_fmc2_nfc_set_ecc(nfc, false);
@@ -603,13 +581,13 @@ static int stm32_fmc2_nfc_bch_calculate(struct nand_chip *chip, const u8 *data,
}
/* Read parity bits */
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR1);
+ regmap_read(nfc->regmap, FMC2_BCHPBR1, &bchpbr);
ecc[0] = bchpbr;
ecc[1] = bchpbr >> 8;
ecc[2] = bchpbr >> 16;
ecc[3] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR2);
+ regmap_read(nfc->regmap, FMC2_BCHPBR2, &bchpbr);
ecc[4] = bchpbr;
ecc[5] = bchpbr >> 8;
ecc[6] = bchpbr >> 16;
@@ -617,13 +595,13 @@ static int stm32_fmc2_nfc_bch_calculate(struct nand_chip *chip, const u8 *data,
if (chip->ecc.strength == FMC2_ECC_BCH8) {
ecc[7] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR3);
+ regmap_read(nfc->regmap, FMC2_BCHPBR3, &bchpbr);
ecc[8] = bchpbr;
ecc[9] = bchpbr >> 8;
ecc[10] = bchpbr >> 16;
ecc[11] = bchpbr >> 24;
- bchpbr = readl_relaxed(nfc->io_base + FMC2_BCHPBR4);
+ regmap_read(nfc->regmap, FMC2_BCHPBR4, &bchpbr);
ecc[12] = bchpbr;
}
@@ -685,11 +663,7 @@ static int stm32_fmc2_nfc_bch_correct(struct nand_chip *chip, u8 *dat,
return -ETIMEDOUT;
}
- ecc_sta[0] = readl_relaxed(nfc->io_base + FMC2_BCHDSR0);
- ecc_sta[1] = readl_relaxed(nfc->io_base + FMC2_BCHDSR1);
- ecc_sta[2] = readl_relaxed(nfc->io_base + FMC2_BCHDSR2);
- ecc_sta[3] = readl_relaxed(nfc->io_base + FMC2_BCHDSR3);
- ecc_sta[4] = readl_relaxed(nfc->io_base + FMC2_BCHDSR4);
+ regmap_bulk_read(nfc->regmap, FMC2_BCHDSR0, ecc_sta, 5);
stm32_fmc2_nfc_set_ecc(nfc, false);
@@ -764,30 +738,29 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
{
struct stm32_fmc2_nfc *nfc = to_stm32_nfc(chip->controller);
struct mtd_info *mtd = nand_to_mtd(chip);
- u32 csqcfgr1, csqcfgr2, csqcfgr3;
- u32 csqar1, csqar2;
u32 ecc_offset = mtd->writesize + FMC2_BBM_LEN;
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
+ /*
+ * cfg[0] => csqcfgr1, cfg[1] => csqcfgr2, cfg[2] => csqcfgr3
+ * cfg[3] => csqar1, cfg[4] => csqar2
+ */
+ u32 cfg[5];
- if (write_data)
- pcr |= FMC2_PCR_WEN;
- else
- pcr &= ~FMC2_PCR_WEN;
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
+ regmap_update_bits(nfc->regmap, FMC2_PCR, FMC2_PCR_WEN,
+ write_data ? FMC2_PCR_WEN : 0);
/*
* - Set Program Page/Page Read command
* - Enable DMA request data
* - Set timings
*/
- csqcfgr1 = FMC2_CSQCFGR1_DMADEN | FMC2_CSQCFGR1_CMD1T;
+ cfg[0] = FMC2_CSQCFGR1_DMADEN | FMC2_CSQCFGR1_CMD1T;
if (write_data)
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_SEQIN);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_SEQIN);
else
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_READ0) |
- FMC2_CSQCFGR1_CMD2EN |
- FIELD_PREP(FMC2_CSQCFGR1_CMD2, NAND_CMD_READSTART) |
- FMC2_CSQCFGR1_CMD2T;
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_CMD1, NAND_CMD_READ0) |
+ FMC2_CSQCFGR1_CMD2EN |
+ FIELD_PREP(FMC2_CSQCFGR1_CMD2, NAND_CMD_READSTART) |
+ FMC2_CSQCFGR1_CMD2T;
/*
* - Set Random Data Input/Random Data Read command
@@ -796,30 +769,29 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Set timings
*/
if (write_data)
- csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDIN);
+ cfg[1] = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDIN);
else
- csqcfgr2 = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDOUT) |
- FMC2_CSQCFGR2_RCMD2EN |
- FIELD_PREP(FMC2_CSQCFGR2_RCMD2,
- NAND_CMD_RNDOUTSTART) |
- FMC2_CSQCFGR2_RCMD1T |
- FMC2_CSQCFGR2_RCMD2T;
+ cfg[1] = FIELD_PREP(FMC2_CSQCFGR2_RCMD1, NAND_CMD_RNDOUT) |
+ FMC2_CSQCFGR2_RCMD2EN |
+ FIELD_PREP(FMC2_CSQCFGR2_RCMD2, NAND_CMD_RNDOUTSTART) |
+ FMC2_CSQCFGR2_RCMD1T |
+ FMC2_CSQCFGR2_RCMD2T;
if (!raw) {
- csqcfgr2 |= write_data ? 0 : FMC2_CSQCFGR2_DMASEN;
- csqcfgr2 |= FMC2_CSQCFGR2_SQSDTEN;
+ cfg[1] |= write_data ? 0 : FMC2_CSQCFGR2_DMASEN;
+ cfg[1] |= FMC2_CSQCFGR2_SQSDTEN;
}
/*
* - Set the number of sectors to be written
* - Set timings
*/
- csqcfgr3 = FIELD_PREP(FMC2_CSQCFGR3_SNBR, chip->ecc.steps - 1);
+ cfg[2] = FIELD_PREP(FMC2_CSQCFGR3_SNBR, chip->ecc.steps - 1);
if (write_data) {
- csqcfgr3 |= FMC2_CSQCFGR3_RAC2T;
+ cfg[2] |= FMC2_CSQCFGR3_RAC2T;
if (chip->options & NAND_ROW_ADDR_3)
- csqcfgr3 |= FMC2_CSQCFGR3_AC5T;
+ cfg[2] |= FMC2_CSQCFGR3_AC5T;
else
- csqcfgr3 |= FMC2_CSQCFGR3_AC4T;
+ cfg[2] |= FMC2_CSQCFGR3_AC4T;
}
/*
@@ -827,8 +799,8 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* Byte 1 and byte 2 => column, we start at 0x0
* Byte 3 and byte 4 => page
*/
- csqar1 = FIELD_PREP(FMC2_CSQCAR1_ADDC3, page);
- csqar1 |= FIELD_PREP(FMC2_CSQCAR1_ADDC4, page >> 8);
+ cfg[3] = FIELD_PREP(FMC2_CSQCAR1_ADDC3, page);
+ cfg[3] |= FIELD_PREP(FMC2_CSQCAR1_ADDC4, page >> 8);
/*
* - Set chip enable number
@@ -836,23 +808,19 @@ static void stm32_fmc2_nfc_rw_page_init(struct nand_chip *chip, int page,
* - Calculate the number of address cycles to be issued
* - Set byte 5 of address cycle if needed
*/
- csqar2 = FIELD_PREP(FMC2_CSQCAR2_NANDCEN, nfc->cs_sel);
+ cfg[4] = FIELD_PREP(FMC2_CSQCAR2_NANDCEN, nfc->cs_sel);
if (chip->options & NAND_BUSWIDTH_16)
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset >> 1);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset >> 1);
else
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_SAO, ecc_offset);
if (chip->options & NAND_ROW_ADDR_3) {
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 5);
- csqar2 |= FIELD_PREP(FMC2_CSQCAR2_ADDC5, page >> 16);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 5);
+ cfg[4] |= FIELD_PREP(FMC2_CSQCAR2_ADDC5, page >> 16);
} else {
- csqcfgr1 |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 4);
+ cfg[0] |= FIELD_PREP(FMC2_CSQCFGR1_ACYNBR, 4);
}
- writel_relaxed(csqcfgr1, nfc->io_base + FMC2_CSQCFGR1);
- writel_relaxed(csqcfgr2, nfc->io_base + FMC2_CSQCFGR2);
- writel_relaxed(csqcfgr3, nfc->io_base + FMC2_CSQCFGR3);
- writel_relaxed(csqar1, nfc->io_base + FMC2_CSQAR1);
- writel_relaxed(csqar2, nfc->io_base + FMC2_CSQAR2);
+ regmap_bulk_write(nfc->regmap, FMC2_CSQCFGR1, cfg, 5);
}
static void stm32_fmc2_nfc_dma_callback(void *arg)
@@ -870,7 +838,6 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
struct dma_chan *dma_ch = nfc->dma_rx_ch;
enum dma_data_direction dma_data_dir = DMA_FROM_DEVICE;
enum dma_transfer_direction dma_transfer_dir = DMA_DEV_TO_MEM;
- u32 csqcr = readl_relaxed(nfc->io_base + FMC2_CSQCR);
int eccsteps = chip->ecc.steps;
int eccsize = chip->ecc.size;
unsigned long timeout = msecs_to_jiffies(FMC2_TIMEOUT_MS);
@@ -948,8 +915,8 @@ static int stm32_fmc2_nfc_xfer(struct nand_chip *chip, const u8 *buf,
stm32_fmc2_nfc_enable_seq_irq(nfc);
/* Start the transfer */
- csqcr |= FMC2_CSQCR_CSQSTART;
- writel_relaxed(csqcr, nfc->io_base + FMC2_CSQCR);
+ regmap_update_bits(nfc->regmap, FMC2_CSQCR,
+ FMC2_CSQCR_CSQSTART, FMC2_CSQCR_CSQSTART);
/* Wait end of sequencer transfer */
if (!wait_for_completion_timeout(&nfc->complete, timeout)) {
@@ -1042,11 +1009,13 @@ static int stm32_fmc2_nfc_seq_write_page_raw(struct nand_chip *chip,
}
/* Get a status indicating which sectors have errors */
-static inline u16 stm32_fmc2_nfc_get_mapping_status(struct stm32_fmc2_nfc *nfc)
+static u16 stm32_fmc2_nfc_get_mapping_status(struct stm32_fmc2_nfc *nfc)
{
- u32 csqemsr = readl_relaxed(nfc->io_base + FMC2_CSQEMSR);
+ u32 csqemsr;
- return csqemsr & FMC2_CSQEMSR_SEM;
+ regmap_read(nfc->regmap, FMC2_CSQEMSR, &csqemsr);
+
+ return FIELD_GET(FMC2_CSQEMSR_SEM, csqemsr);
}
static int stm32_fmc2_nfc_seq_correct(struct nand_chip *chip, u8 *dat,
@@ -1302,22 +1271,22 @@ static int stm32_fmc2_nfc_waitrdy(struct nand_chip *chip,
u32 isr, sr;
/* Check if there is no pending requests to the NAND flash */
- if (readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_SR, sr,
- sr & FMC2_SR_NWRF, 1,
- 1000 * FMC2_TIMEOUT_MS))
+ if (regmap_read_poll_timeout(nfc->regmap, FMC2_SR, sr,
+ sr & FMC2_SR_NWRF, 1,
+ 1000 * FMC2_TIMEOUT_MS))
dev_warn(nfc->dev, "Waitrdy timeout\n");
/* Wait tWB before R/B# signal is low */
- timings = nand_get_sdr_timings(&chip->data_interface);
+ timings = nand_get_sdr_timings(nand_get_interface_config(chip));
ndelay(PSEC_TO_NSEC(timings->tWB_max));
/* R/B# signal is low, clear high level flag */
- writel_relaxed(FMC2_ICR_CIHLF, nfc->io_base + FMC2_ICR);
+ regmap_write(nfc->regmap, FMC2_ICR, FMC2_ICR_CIHLF);
/* Wait R/B# signal is high */
- return readl_relaxed_poll_timeout_atomic(nfc->io_base + FMC2_ISR,
- isr, isr & FMC2_ISR_IHLF,
- 5, 1000 * timeout_ms);
+ return regmap_read_poll_timeout(nfc->regmap, FMC2_ISR, isr,
+ isr & FMC2_ISR_IHLF, 5,
+ 1000 * FMC2_TIMEOUT_MS);
}
static int stm32_fmc2_nfc_exec_op(struct nand_chip *chip,
@@ -1375,8 +1344,9 @@ static int stm32_fmc2_nfc_exec_op(struct nand_chip *chip,
static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
{
- u32 pcr = readl_relaxed(nfc->io_base + FMC2_PCR);
- u32 bcr1 = readl_relaxed(nfc->io_base + FMC2_BCR1);
+ u32 pcr;
+
+ regmap_read(nfc->regmap, FMC2_PCR, &pcr);
/* Set CS used to undefined */
nfc->cs_sel = -1;
@@ -1407,12 +1377,13 @@ static void stm32_fmc2_nfc_init(struct stm32_fmc2_nfc *nfc)
pcr |= FIELD_PREP(FMC2_PCR_TAR, FMC2_PCR_TAR_DEFAULT);
/* Enable FMC2 controller */
- bcr1 |= FMC2_BCR1_FMC2EN;
+ if (nfc->dev == nfc->cdev)
+ regmap_update_bits(nfc->regmap, FMC2_BCR1,
+ FMC2_BCR1_FMC2EN, FMC2_BCR1_FMC2EN);
- writel_relaxed(bcr1, nfc->io_base + FMC2_BCR1);
- writel_relaxed(pcr, nfc->io_base + FMC2_PCR);
- writel_relaxed(FMC2_PMEM_DEFAULT, nfc->io_base + FMC2_PMEM);
- writel_relaxed(FMC2_PATT_DEFAULT, nfc->io_base + FMC2_PATT);
+ regmap_write(nfc->regmap, FMC2_PCR, pcr);
+ regmap_write(nfc->regmap, FMC2_PMEM, FMC2_PMEM_DEFAULT);
+ regmap_write(nfc->regmap, FMC2_PATT, FMC2_PATT_DEFAULT);
}
static void stm32_fmc2_nfc_calc_timings(struct nand_chip *chip,
@@ -1546,7 +1517,7 @@ static void stm32_fmc2_nfc_calc_timings(struct nand_chip *chip,
}
static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf)
+ const struct nand_interface_config *conf)
{
const struct nand_sdr_timings *sdrt;
@@ -1570,7 +1541,7 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
nfc->dma_tx_ch = dma_request_chan(nfc->dev, "tx");
if (IS_ERR(nfc->dma_tx_ch)) {
ret = PTR_ERR(nfc->dma_tx_ch);
- if (ret != -ENODEV)
+ if (ret != -ENODEV && ret != -EPROBE_DEFER)
dev_err(nfc->dev,
"failed to request tx DMA channel: %d\n", ret);
nfc->dma_tx_ch = NULL;
@@ -1580,7 +1551,7 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
nfc->dma_rx_ch = dma_request_chan(nfc->dev, "rx");
if (IS_ERR(nfc->dma_rx_ch)) {
ret = PTR_ERR(nfc->dma_rx_ch);
- if (ret != -ENODEV)
+ if (ret != -ENODEV && ret != -EPROBE_DEFER)
dev_err(nfc->dev,
"failed to request rx DMA channel: %d\n", ret);
nfc->dma_rx_ch = NULL;
@@ -1590,7 +1561,7 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
nfc->dma_ecc_ch = dma_request_chan(nfc->dev, "ecc");
if (IS_ERR(nfc->dma_ecc_ch)) {
ret = PTR_ERR(nfc->dma_ecc_ch);
- if (ret != -ENODEV)
+ if (ret != -ENODEV && ret != -EPROBE_DEFER)
dev_err(nfc->dev,
"failed to request ecc DMA channel: %d\n", ret);
nfc->dma_ecc_ch = NULL;
@@ -1764,7 +1735,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops stm32_fmc2_nfc_controller_ops = {
.attach_chip = stm32_fmc2_nfc_attach_chip,
.exec_op = stm32_fmc2_nfc_exec_op,
- .setup_data_interface = stm32_fmc2_nfc_setup_interface,
+ .setup_interface = stm32_fmc2_nfc_setup_interface,
};
static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
@@ -1838,6 +1809,33 @@ static int stm32_fmc2_nfc_parse_dt(struct stm32_fmc2_nfc *nfc)
return ret;
}
+static int stm32_fmc2_nfc_set_cdev(struct stm32_fmc2_nfc *nfc)
+{
+ struct device *dev = nfc->dev;
+ bool ebi_found = false;
+
+ if (dev->parent && of_device_is_compatible(dev->parent->of_node,
+ "st,stm32mp1-fmc2-ebi"))
+ ebi_found = true;
+
+ if (of_device_is_compatible(dev->of_node, "st,stm32mp1-fmc2-nfc")) {
+ if (ebi_found) {
+ nfc->cdev = dev->parent;
+
+ return 0;
+ }
+
+ return -EINVAL;
+ }
+
+ if (ebi_found)
+ return -EINVAL;
+
+ nfc->cdev = dev;
+
+ return 0;
+}
+
static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1847,7 +1845,9 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
struct resource *res;
struct mtd_info *mtd;
struct nand_chip *chip;
+ struct resource cres;
int chip_cs, mem_region, ret, irq;
+ int start_region = 0;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
if (!nfc)
@@ -1857,18 +1857,28 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
nand_controller_init(&nfc->base);
nfc->base.ops = &stm32_fmc2_nfc_controller_ops;
+ ret = stm32_fmc2_nfc_set_cdev(nfc);
+ if (ret)
+ return ret;
+
ret = stm32_fmc2_nfc_parse_dt(nfc);
if (ret)
return ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- nfc->io_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(nfc->io_base))
- return PTR_ERR(nfc->io_base);
+ ret = of_address_to_resource(nfc->cdev->of_node, 0, &cres);
+ if (ret)
+ return ret;
+
+ nfc->io_phys_addr = cres.start;
+
+ nfc->regmap = device_node_to_regmap(nfc->cdev->of_node);
+ if (IS_ERR(nfc->regmap))
+ return PTR_ERR(nfc->regmap);
- nfc->io_phys_addr = res->start;
+ if (nfc->dev == nfc->cdev)
+ start_region = 1;
- for (chip_cs = 0, mem_region = 1; chip_cs < FMC2_MAX_CE;
+ for (chip_cs = 0, mem_region = start_region; chip_cs < FMC2_MAX_CE;
chip_cs++, mem_region += 3) {
if (!(nfc->cs_assigned & BIT(chip_cs)))
continue;
@@ -1906,7 +1916,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
init_completion(&nfc->complete);
- nfc->clk = devm_clk_get(dev, NULL);
+ nfc->clk = devm_clk_get(nfc->cdev, NULL);
if (IS_ERR(nfc->clk))
return PTR_ERR(nfc->clk);
@@ -2047,6 +2057,7 @@ static SIMPLE_DEV_PM_OPS(stm32_fmc2_nfc_pm_ops, stm32_fmc2_nfc_suspend,
static const struct of_device_id stm32_fmc2_nfc_match[] = {
{.compatible = "st,stm32mp15-fmc2"},
+ {.compatible = "st,stm32mp1-fmc2-nfc"},
{}
};
MODULE_DEVICE_TABLE(of, stm32_fmc2_nfc_match);
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ffbc1651fadc..9c50c2b965e1 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1376,8 +1376,8 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
#define sunxi_nand_lookup_timing(l, p, c) \
_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
-static int sunxi_nfc_setup_data_interface(struct nand_chip *nand, int csline,
- const struct nand_data_interface *conf)
+static int sunxi_nfc_setup_interface(struct nand_chip *nand, int csline,
+ const struct nand_interface_config *conf)
{
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
@@ -1920,7 +1920,7 @@ static int sunxi_nfc_exec_op(struct nand_chip *nand,
static const struct nand_controller_ops sunxi_nand_controller_ops = {
.attach_chip = sunxi_nand_attach_chip,
- .setup_data_interface = sunxi_nfc_setup_data_interface,
+ .setup_interface = sunxi_nfc_setup_interface,
.exec_op = sunxi_nfc_exec_op,
};
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 246871e01027..bdb965ae7a4a 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -113,59 +113,80 @@ struct tango_chip {
#define TIMING(t0, t1, t2, t3) ((t0) << 24 | (t1) << 16 | (t2) << 8 | (t3))
-static void tango_cmd_ctrl(struct nand_chip *chip, int dat, unsigned int ctrl)
+static void tango_select_target(struct nand_chip *chip, unsigned int cs)
{
+ struct tango_nfc *nfc = to_tango_nfc(chip->controller);
struct tango_chip *tchip = to_tango_chip(chip);
- if (ctrl & NAND_CLE)
- writeb_relaxed(dat, tchip->base + PBUS_CMD);
-
- if (ctrl & NAND_ALE)
- writeb_relaxed(dat, tchip->base + PBUS_ADDR);
+ writel_relaxed(tchip->timing1, nfc->reg_base + NFC_TIMING1);
+ writel_relaxed(tchip->timing2, nfc->reg_base + NFC_TIMING2);
+ writel_relaxed(tchip->xfer_cfg, nfc->reg_base + NFC_XFER_CFG);
+ writel_relaxed(tchip->pkt_0_cfg, nfc->reg_base + NFC_PKT_0_CFG);
+ writel_relaxed(tchip->pkt_n_cfg, nfc->reg_base + NFC_PKT_N_CFG);
+ writel_relaxed(tchip->bb_cfg, nfc->reg_base + NFC_BB_CFG);
}
-static int tango_dev_ready(struct nand_chip *chip)
+static int tango_waitrdy(struct nand_chip *chip, unsigned int timeout_ms)
{
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
+ u32 status;
- return readl_relaxed(nfc->pbus_base + PBUS_CS_CTRL) & PBUS_IORDY;
+ return readl_relaxed_poll_timeout(nfc->pbus_base + PBUS_CS_CTRL,
+ status, status & PBUS_IORDY, 20,
+ timeout_ms);
}
-static u8 tango_read_byte(struct nand_chip *chip)
+static int tango_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
{
struct tango_chip *tchip = to_tango_chip(chip);
+ unsigned int i;
- return readb_relaxed(tchip->base + PBUS_DATA);
-}
-
-static void tango_read_buf(struct nand_chip *chip, u8 *buf, int len)
-{
- struct tango_chip *tchip = to_tango_chip(chip);
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ writeb_relaxed(instr->ctx.cmd.opcode, tchip->base + PBUS_CMD);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ for (i = 0; i < instr->ctx.addr.naddrs; i++)
+ writeb_relaxed(instr->ctx.addr.addrs[i],
+ tchip->base + PBUS_ADDR);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ ioread8_rep(tchip->base + PBUS_DATA, instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ iowrite8_rep(tchip->base + PBUS_DATA, instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ return tango_waitrdy(chip,
+ instr->ctx.waitrdy.timeout_ms);
+ default:
+ break;
+ }
- ioread8_rep(tchip->base + PBUS_DATA, buf, len);
+ return -EINVAL;
}
-static void tango_write_buf(struct nand_chip *chip, const u8 *buf, int len)
+static int tango_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
{
- struct tango_chip *tchip = to_tango_chip(chip);
-
- iowrite8_rep(tchip->base + PBUS_DATA, buf, len);
-}
+ unsigned int i;
+ int ret = 0;
-static void tango_select_chip(struct nand_chip *chip, int idx)
-{
- struct tango_nfc *nfc = to_tango_nfc(chip->controller);
- struct tango_chip *tchip = to_tango_chip(chip);
+ if (check_only)
+ return 0;
- if (idx < 0)
- return; /* No "chip unselect" function */
+ tango_select_target(chip, op->cs);
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = tango_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ break;
+ }
- writel_relaxed(tchip->timing1, nfc->reg_base + NFC_TIMING1);
- writel_relaxed(tchip->timing2, nfc->reg_base + NFC_TIMING2);
- writel_relaxed(tchip->xfer_cfg, nfc->reg_base + NFC_XFER_CFG);
- writel_relaxed(tchip->pkt_0_cfg, nfc->reg_base + NFC_PKT_0_CFG);
- writel_relaxed(tchip->pkt_n_cfg, nfc->reg_base + NFC_PKT_N_CFG);
- writel_relaxed(tchip->bb_cfg, nfc->reg_base + NFC_BB_CFG);
+ return ret;
}
/*
@@ -279,6 +300,7 @@ static int tango_read_page(struct nand_chip *chip, u8 *buf,
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
int err, res, len = mtd->writesize;
+ tango_select_target(chip, chip->cur_cs);
if (oob_required)
chip->ecc.read_oob(chip, page);
@@ -300,22 +322,30 @@ static int tango_write_page(struct nand_chip *chip, const u8 *buf,
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
- int err, status, len = mtd->writesize;
+ const struct nand_sdr_timings *timings;
+ int err, len = mtd->writesize;
+ u8 status;
/* Calling tango_write_oob() would send PAGEPROG twice */
if (oob_required)
return -ENOTSUPP;
+ tango_select_target(chip, chip->cur_cs);
writel_relaxed(0xffffffff, nfc->mem_base + METADATA);
err = do_dma(nfc, DMA_TO_DEVICE, NFC_WRITE, buf, len, page);
if (err)
return err;
- status = chip->legacy.waitfunc(chip);
- if (status & NAND_STATUS_FAIL)
- return -EIO;
+ timings = nand_get_sdr_timings(nand_get_interface_config(chip));
+ err = tango_waitrdy(chip, PSEC_TO_MSEC(timings->tR_max));
+ if (err)
+ return err;
- return 0;
+ err = nand_status_op(chip, &status);
+ if (err)
+ return err;
+
+ return (status & NAND_STATUS_FAIL) ? -EIO : 0;
}
static void aux_read(struct nand_chip *chip, u8 **buf, int len, int *pos)
@@ -326,7 +356,9 @@ static void aux_read(struct nand_chip *chip, u8 **buf, int len, int *pos)
/* skip over "len" bytes */
nand_change_read_column_op(chip, *pos, NULL, 0, false);
} else {
- tango_read_buf(chip, *buf, len);
+ struct tango_chip *tchip = to_tango_chip(chip);
+
+ ioread8_rep(tchip->base + PBUS_DATA, *buf, len);
*buf += len;
}
}
@@ -339,7 +371,9 @@ static void aux_write(struct nand_chip *chip, const u8 **buf, int len, int *pos)
/* skip over "len" bytes */
nand_change_write_column_op(chip, *pos, NULL, 0, false);
} else {
- tango_write_buf(chip, *buf, len);
+ struct tango_chip *tchip = to_tango_chip(chip);
+
+ iowrite8_rep(tchip->base + PBUS_DATA, *buf, len);
*buf += len;
}
}
@@ -420,6 +454,7 @@ static void raw_write(struct nand_chip *chip, const u8 *buf, const u8 *oob)
static int tango_read_page_raw(struct nand_chip *chip, u8 *buf,
int oob_required, int page)
{
+ tango_select_target(chip, chip->cur_cs);
nand_read_page_op(chip, page, 0, NULL, 0);
raw_read(chip, buf, chip->oob_poi);
return 0;
@@ -428,6 +463,7 @@ static int tango_read_page_raw(struct nand_chip *chip, u8 *buf,
static int tango_write_page_raw(struct nand_chip *chip, const u8 *buf,
int oob_required, int page)
{
+ tango_select_target(chip, chip->cur_cs);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
raw_write(chip, buf, chip->oob_poi);
return nand_prog_page_end_op(chip);
@@ -435,6 +471,7 @@ static int tango_write_page_raw(struct nand_chip *chip, const u8 *buf,
static int tango_read_oob(struct nand_chip *chip, int page)
{
+ tango_select_target(chip, chip->cur_cs);
nand_read_page_op(chip, page, 0, NULL, 0);
raw_read(chip, NULL, chip->oob_poi);
return 0;
@@ -442,6 +479,7 @@ static int tango_read_oob(struct nand_chip *chip, int page)
static int tango_write_oob(struct nand_chip *chip, int page)
{
+ tango_select_target(chip, chip->cur_cs);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
raw_write(chip, NULL, chip->oob_poi);
return nand_prog_page_end_op(chip);
@@ -477,7 +515,7 @@ static u32 to_ticks(int kHz, int ps)
}
static int tango_set_timings(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+ const struct nand_interface_config *conf)
{
const struct nand_sdr_timings *sdr = nand_get_sdr_timings(conf);
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
@@ -527,7 +565,8 @@ static int tango_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops tango_controller_ops = {
.attach_chip = tango_attach_chip,
- .setup_data_interface = tango_set_timings,
+ .setup_interface = tango_set_timings,
+ .exec_op = tango_exec_op,
};
static int chip_init(struct device *dev, struct device_node *np)
@@ -562,12 +601,6 @@ static int chip_init(struct device *dev, struct device_node *np)
ecc = &chip->ecc;
mtd = nand_to_mtd(chip);
- chip->legacy.read_byte = tango_read_byte;
- chip->legacy.write_buf = tango_write_buf;
- chip->legacy.read_buf = tango_read_buf;
- chip->legacy.select_chip = tango_select_chip;
- chip->legacy.cmd_ctrl = tango_cmd_ctrl;
- chip->legacy.dev_ready = tango_dev_ready;
chip->options = NAND_USES_DMA |
NAND_NO_SUBPAGE_WRITE |
NAND_WAIT_TCCS;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index f9d046b2cd3b..6b6212ffa01c 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -813,8 +813,8 @@ static void tegra_nand_setup_timing(struct tegra_nand_controller *ctrl,
writel_relaxed(reg, ctrl->regs + TIMING_2);
}
-static int tegra_nand_setup_data_interface(struct nand_chip *chip, int csline,
- const struct nand_data_interface *conf)
+static int tegra_nand_setup_interface(struct nand_chip *chip, int csline,
+ const struct nand_interface_config *conf)
{
struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
const struct nand_sdr_timings *timings;
@@ -1053,7 +1053,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops tegra_nand_controller_ops = {
.attach_chip = &tegra_nand_attach_chip,
.exec_op = tegra_nand_exec_op,
- .setup_data_interface = tegra_nand_setup_data_interface,
+ .setup_interface = tegra_nand_setup_interface,
};
static int tegra_nand_chips_init(struct device *dev,
diff --git a/drivers/mtd/parsers/bcm63xxpart.c b/drivers/mtd/parsers/bcm63xxpart.c
index 78f90c6c18fd..b15bdadaedb5 100644
--- a/drivers/mtd/parsers/bcm63xxpart.c
+++ b/drivers/mtd/parsers/bcm63xxpart.c
@@ -22,6 +22,11 @@
#include <linux/mtd/partitions.h>
#include <linux/of.h>
+#ifdef CONFIG_MIPS
+#include <asm/bootinfo.h>
+#include <asm/fw/cfe/cfe_api.h>
+#endif /* CONFIG_MIPS */
+
#define BCM963XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
#define BCM963XX_CFE_MAGIC_OFFSET 0x4e0
@@ -32,28 +37,15 @@
#define STR_NULL_TERMINATE(x) \
do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
-static int bcm63xx_detect_cfe(struct mtd_info *master)
+static inline int bcm63xx_detect_cfe(void)
{
- char buf[9];
- int ret;
- size_t retlen;
+ int ret = 0;
- ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
- (void *)buf);
- buf[retlen] = 0;
+#ifdef CONFIG_MIPS
+ ret = (fw_arg3 == CFE_EPTSEAL);
+#endif /* CONFIG_MIPS */
- if (ret)
- return ret;
-
- if (strncmp("cfe-v", buf, 5) == 0)
- return 0;
-
- /* very old CFE's do not have the cfe-v string, so check for magic */
- ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
- (void *)buf);
- buf[retlen] = 0;
-
- return strncmp("CFE1CFE1", buf, 8);
+ return ret;
}
static int bcm63xx_read_nvram(struct mtd_info *master,
@@ -138,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
struct bcm963xx_nvram *nvram = NULL;
int ret;
- if (bcm63xx_detect_cfe(master))
+ if (!bcm63xx_detect_cfe())
return -EINVAL;
nvram = vzalloc(sizeof(*nvram));
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
index 81329f680bec..c72aa1ab71ad 100644
--- a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
+++ b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
@@ -68,7 +68,9 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x1bca), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x43a4), (unsigned long)&cnl_info },
{ PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c
index 61d2a0ad2131..b54a56a68100 100644
--- a/drivers/mtd/spi-nor/controllers/intel-spi.c
+++ b/drivers/mtd/spi-nor/controllers/intel-spi.c
@@ -292,7 +292,7 @@ static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
u32 val;
return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
- !(val & HSFSTS_CTL_SCIP), 40,
+ !(val & HSFSTS_CTL_SCIP), 0,
INTEL_SPI_TIMEOUT * 1000);
}
@@ -301,7 +301,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
u32 val;
return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
- !(val & SSFSTS_CTL_SCIP), 40,
+ !(val & SSFSTS_CTL_SCIP), 0,
INTEL_SPI_TIMEOUT * 1000);
}
@@ -612,6 +612,15 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
return 0;
}
+ /*
+ * We hope that HW sequencer will do the right thing automatically and
+ * with the SW sequencer we cannot use preopcode anyway, so just ignore
+ * the Write Disable operation and pretend it was completed
+ * successfully.
+ */
+ if (opcode == SPINOR_OP_WRDI)
+ return 0;
+
writel(0, ispi->base + FADDR);
/* Write the value beforehand */
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0369d98b2d12..65eff4ce6ab1 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1907,15 +1907,16 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
}
/**
- * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
- * Register 1.
+ * spi_nor_sr1_bit6_quad_enable() - Set/Unset the Quad Enable BIT(6) in the
+ * Status Register 1.
* @nor: pointer to a 'struct spi_nor'
+ * @enable: true to enable Quad mode, false to disable Quad mode.
*
* Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
*
* Return: 0 on success, -errno otherwise.
*/
-int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor, bool enable)
{
int ret;
@@ -1923,45 +1924,56 @@ int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
if (ret)
return ret;
- if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
+ if ((enable && (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)) ||
+ (!enable && !(nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)))
return 0;
- nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+ if (enable)
+ nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+ else
+ nor->bouncebuf[0] &= ~SR1_QUAD_EN_BIT6;
return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
}
/**
- * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
- * Register 2.
+ * spi_nor_sr2_bit1_quad_enable() - set/unset the Quad Enable BIT(1) in the
+ * Status Register 2.
* @nor: pointer to a 'struct spi_nor'.
+ * @enable: true to enable Quad mode, false to disable Quad mode.
*
* Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
*
* Return: 0 on success, -errno otherwise.
*/
-int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor, bool enable)
{
int ret;
if (nor->flags & SNOR_F_NO_READ_CR)
- return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
+ return spi_nor_write_16bit_cr_and_check(nor,
+ enable ? SR2_QUAD_EN_BIT1 : 0);
ret = spi_nor_read_cr(nor, nor->bouncebuf);
if (ret)
return ret;
- if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+ if ((enable && (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)) ||
+ (!enable && !(nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)))
return 0;
- nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+ if (enable)
+ nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+ else
+ nor->bouncebuf[0] &= ~SR2_QUAD_EN_BIT1;
return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
}
/**
- * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * spi_nor_sr2_bit7_quad_enable() - set/unset QE bit in Status Register 2.
* @nor: pointer to a 'struct spi_nor'
+ * @enable: true to enable Quad mode, false to disable Quad mode.
*
* Set the Quad Enable (QE) bit in the Status Register 2.
*
@@ -1971,7 +1983,7 @@ int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
*
* Return: 0 on success, -errno otherwise.
*/
-int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor, bool enable)
{
u8 *sr2 = nor->bouncebuf;
int ret;
@@ -1981,11 +1993,15 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
ret = spi_nor_read_sr2(nor, sr2);
if (ret)
return ret;
- if (*sr2 & SR2_QUAD_EN_BIT7)
+ if ((enable && (*sr2 & SR2_QUAD_EN_BIT7)) ||
+ (!enable && !(*sr2 & SR2_QUAD_EN_BIT7)))
return 0;
/* Update the Quad Enable bit. */
- *sr2 |= SR2_QUAD_EN_BIT7;
+ if (enable)
+ *sr2 |= SR2_QUAD_EN_BIT7;
+ else
+ *sr2 &= ~SR2_QUAD_EN_BIT7;
ret = spi_nor_write_sr2(nor, sr2);
if (ret)
@@ -2898,12 +2914,13 @@ static int spi_nor_init_params(struct spi_nor *nor)
}
/**
- * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * spi_nor_quad_enable() - enable/disable Quad I/O if needed.
* @nor: pointer to a 'struct spi_nor'
+ * @enable: true to enable Quad mode. false to disable Quad mode.
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_quad_enable(struct spi_nor *nor)
+static int spi_nor_quad_enable(struct spi_nor *nor, bool enable)
{
if (!nor->params->quad_enable)
return 0;
@@ -2912,7 +2929,7 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
spi_nor_get_protocol_width(nor->write_proto) == 4))
return 0;
- return nor->params->quad_enable(nor);
+ return nor->params->quad_enable(nor, enable);
}
/**
@@ -2936,7 +2953,7 @@ static int spi_nor_init(struct spi_nor *nor)
{
int err;
- err = spi_nor_quad_enable(nor);
+ err = spi_nor_quad_enable(nor, true);
if (err) {
dev_dbg(nor->dev, "quad mode not supported\n");
return err;
@@ -2983,6 +3000,8 @@ void spi_nor_restore(struct spi_nor *nor)
if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
nor->flags & SNOR_F_BROKEN_RESET)
nor->params->set_4byte_addr_mode(nor, false);
+
+ spi_nor_quad_enable(nor, false);
}
EXPORT_SYMBOL_GPL(spi_nor_restore);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 6f2f6b27173f..95aa32f3ceb1 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -198,7 +198,7 @@ struct spi_nor_locking_ops {
* higher index in the array, the higher priority.
* @erase_map: the erase map parsed from the SFDP Sector Map Parameter
* Table.
- * @quad_enable: enables SPI NOR quad mode.
+ * @quad_enable: enables/disables SPI NOR Quad mode.
* @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
* @convert_addr: converts an absolute address into something the flash
* will understand. Particularly useful when pagesize is
@@ -219,7 +219,7 @@ struct spi_nor_flash_parameter {
struct spi_nor_erase_map erase_map;
- int (*quad_enable)(struct spi_nor *nor);
+ int (*quad_enable)(struct spi_nor *nor, bool enable);
int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
@@ -406,9 +406,9 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
int spi_nor_wait_till_ready(struct spi_nor *nor);
int spi_nor_lock_and_prep(struct spi_nor *nor);
void spi_nor_unlock_and_unprep(struct spi_nor *nor);
-int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
-int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
-int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor, bool enable);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor, bool enable);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor, bool enable);
int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 96735d83c77c..f97f3d127575 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -52,6 +52,9 @@ static const struct flash_info macronix_parts[] = {
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
{ "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
@@ -84,6 +87,9 @@ static const struct flash_info macronix_parts[] = {
SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
SPI_NOR_QUAD_READ) },
+ { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
};
static void macronix_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 3dca5b9af3b6..ef3695080710 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -71,8 +71,8 @@ static const struct flash_info st_parts[] = {
SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
NO_CHIP_ERASE) },
{ "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
+ SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
{ "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index 55c0c508464b..e2a43d39eb5f 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -598,7 +598,8 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
break;
default:
- return -EINVAL;
+ dev_dbg(nor->dev, "BFPT QER reserved value used\n");
+ break;
}
/* Stop here if not JESD216 rev C or later. */
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index e550cd5c9d3a..8429b4af999a 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -64,7 +64,6 @@ static const struct flash_info spansion_parts[] = {
{ "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
.fixups = &s25fs_s_fixups, },
- { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64,
@@ -84,7 +83,8 @@ static const struct flash_info spansion_parts[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 5062af10f138..6dcde15fb1aa 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -64,10 +64,12 @@ static const struct flash_info winbond_parts[] = {
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h
index 2dfe65964f6e..2129f7d3b6eb 100644
--- a/include/linux/mtd/hyperbus.h
+++ b/include/linux/mtd/hyperbus.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0
*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef __LINUX_MTD_HYPERBUS_H__
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0c7483843a32..af99041ceaa9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -12,6 +12,8 @@
#include <linux/mtd/mtd.h>
+struct nand_device;
+
/**
* struct nand_memory_organization - Memory organization structure
* @bits_per_cell: number of bits per NAND cell
@@ -114,11 +116,11 @@ struct nand_page_io_req {
};
/**
- * struct nand_ecc_req - NAND ECC requirements
+ * struct nand_ecc_props - NAND ECC properties
* @strength: ECC strength
- * @step_size: ECC step/block size
+ * @step_size: Number of bytes per step
*/
-struct nand_ecc_req {
+struct nand_ecc_props {
unsigned int strength;
unsigned int step_size;
};
@@ -133,8 +135,6 @@ struct nand_bbt {
unsigned long *cache;
};
-struct nand_device;
-
/**
* struct nand_ops - NAND operations
* @erase: erase a specific block. No need to check if the block is bad before
@@ -179,7 +179,7 @@ struct nand_ops {
struct nand_device {
struct mtd_info mtd;
struct nand_memory_organization memorg;
- struct nand_ecc_req eccreq;
+ struct nand_ecc_props eccreq;
struct nand_row_converter rowconv;
struct nand_bbt bbt;
const struct nand_ops *ops;
diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h
index 122f3439e1af..6166e7c60869 100644
--- a/include/linux/mtd/pfow.h
+++ b/include/linux/mtd/pfow.h
@@ -19,7 +19,7 @@
/* Identification info for LPDDR chip */
#define PFOW_MANUFACTURER_ID 0x0020
#define PFOW_DEVICE_ID 0x0022
-/* Address in PFOW where prog buffer can can be found */
+/* Address in PFOW where prog buffer can be found */
#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040
/* Size of program buffer in words */
#define PFOW_PROGRAM_BUFFER_SIZE 0x0042
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 65b1c1c18b41..a725b620aca2 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -492,22 +492,22 @@ struct nand_sdr_timings {
};
/**
- * enum nand_data_interface_type - NAND interface timing type
+ * enum nand_interface_type - NAND interface type
* @NAND_SDR_IFACE: Single Data Rate interface
*/
-enum nand_data_interface_type {
+enum nand_interface_type {
NAND_SDR_IFACE,
};
/**
- * struct nand_data_interface - NAND interface timing
+ * struct nand_interface_config - NAND interface timing
* @type: type of the timing
* @timings: The timing information
* @timings.mode: Timing mode as defined in the specification
* @timings.sdr: Use it when @type is %NAND_SDR_IFACE.
*/
-struct nand_data_interface {
- enum nand_data_interface_type type;
+struct nand_interface_config {
+ enum nand_interface_type type;
struct nand_timings {
unsigned int mode;
union {
@@ -521,7 +521,7 @@ struct nand_data_interface {
* @conf: The data interface
*/
static inline const struct nand_sdr_timings *
-nand_get_sdr_timings(const struct nand_data_interface *conf)
+nand_get_sdr_timings(const struct nand_interface_config *conf)
{
if (conf->type != NAND_SDR_IFACE)
return ERR_PTR(-EINVAL);
@@ -944,11 +944,10 @@ static inline void nand_op_trace(const char *prefix,
* This method replaces chip->legacy.cmdfunc(),
* chip->legacy.{read,write}_{buf,byte,word}(),
* chip->legacy.dev_ready() and chip->legacy.waifunc().
- * @setup_data_interface: setup the data interface and timing. If
- * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
- * means the configuration should not be applied but
- * only checked.
- * This hook is optional.
+ * @setup_interface: setup the data interface and timing. If chipnr is set to
+ * %NAND_DATA_IFACE_CHECK_ONLY this means the configuration
+ * should not be applied but only checked.
+ * This hook is optional.
*/
struct nand_controller_ops {
int (*attach_chip)(struct nand_chip *chip);
@@ -956,8 +955,8 @@ struct nand_controller_ops {
int (*exec_op)(struct nand_chip *chip,
const struct nand_operation *op,
bool check_only);
- int (*setup_data_interface)(struct nand_chip *chip, int chipnr,
- const struct nand_data_interface *conf);
+ int (*setup_interface)(struct nand_chip *chip, int chipnr,
+ const struct nand_interface_config *conf);
};
/**
@@ -1028,140 +1027,138 @@ struct nand_legacy {
};
/**
- * struct nand_chip - NAND Private Flash Chip Data
- * @base: Inherit from the generic NAND device
- * @legacy: All legacy fields/hooks. If you develop a new driver,
- * don't even try to use any of these fields/hooks, and if
- * you're modifying an existing driver that is using those
- * fields/hooks, you should consider reworking the driver
- * avoid using them.
- * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for
- * setting the read-retry mode. Mostly needed for MLC NAND.
- * @ecc: [BOARDSPECIFIC] ECC control structure
- * @buf_align: minimum buffer alignment required by a platform
- * @oob_poi: "poison value buffer," used for laying out OOB data
- * before writing
- * @page_shift: [INTERN] number of address bits in a page (column
- * address bits).
- * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
- * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
- * @chip_shift: [INTERN] number of address bits in one chip
- * @options: [BOARDSPECIFIC] various chip options. They can partly
- * be set to inform nand_scan about special functionality.
- * See the defines for further explanation.
- * @bbt_options: [INTERN] bad block specific options. All options used
- * here must come from bbm.h. By default, these options
- * will be copied to the appropriate nand_bbt_descr's.
- * @badblockpos: [INTERN] position of the bad block marker in the oob
- * area.
- * @badblockbits: [INTERN] minimum number of set bits in a good block's
- * bad block marker position; i.e., BBM == 11110111b is
- * not bad when badblockbits == 7
- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
- * set to the actually used ONFI mode if the chip is
- * ONFI compliant or deduced from the datasheet if
- * the NAND chip is not ONFI compliant.
- * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
- * @data_buf: [INTERN] buffer for data, size is (page size + oobsize).
- * @pagecache: Structure containing page cache related fields
- * @pagecache.bitflips: Number of bitflips of the cached page
- * @pagecache.page: Page number currently in the cache. -1 means no page is
- * currently cached
- * @subpagesize: [INTERN] holds the subpagesize
- * @id: [INTERN] holds NAND ID
- * @parameters: [INTERN] holds generic parameters under an easily
- * readable form.
- * @data_interface: [INTERN] NAND interface timing information
- * @cur_cs: currently selected target. -1 means no target selected,
- * otherwise we should always have cur_cs >= 0 &&
- * cur_cs < nanddev_ntargets(). NAND Controller drivers
- * should not modify this value, but they're allowed to
- * read it.
- * @read_retries: [INTERN] the number of read retry modes supported
- * @lock: lock protecting the suspended field. Also used to
- * serialize accesses to the NAND device.
- * @suspended: set to 1 when the device is suspended, 0 when it's not.
- * @suspend: [REPLACEABLE] specific NAND device suspend operation
- * @resume: [REPLACEABLE] specific NAND device resume operation
- * @bbt: [INTERN] bad block table pointer
- * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
- * lookup.
- * @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
- * bad block scan.
- * @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independent
- * devices.
- * @priv: [OPTIONAL] pointer to private chip data
- * @manufacturer: [INTERN] Contains manufacturer information
- * @manufacturer.desc: [INTERN] Contains manufacturer's description
- * @manufacturer.priv: [INTERN] Contains manufacturer private information
- * @lock_area: [REPLACEABLE] specific NAND chip lock operation
- * @unlock_area: [REPLACEABLE] specific NAND chip unlock operation
+ * struct nand_chip_ops - NAND chip operations
+ * @suspend: Suspend operation
+ * @resume: Resume operation
+ * @lock_area: Lock operation
+ * @unlock_area: Unlock operation
+ * @setup_read_retry: Set the read-retry mode (mostly needed for MLC NANDs)
+ * @choose_interface_config: Choose the best interface configuration
+ */
+struct nand_chip_ops {
+ int (*suspend)(struct nand_chip *chip);
+ void (*resume)(struct nand_chip *chip);
+ int (*lock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
+ int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
+ int (*setup_read_retry)(struct nand_chip *chip, int retry_mode);
+ int (*choose_interface_config)(struct nand_chip *chip,
+ struct nand_interface_config *iface);
+};
+
+/**
+ * struct nand_manufacturer - NAND manufacturer structure
+ * @desc: The manufacturer description
+ * @priv: Private information for the manufacturer driver
*/
+struct nand_manufacturer {
+ const struct nand_manufacturer_desc *desc;
+ void *priv;
+};
+/**
+ * struct nand_chip - NAND Private Flash Chip Data
+ * @base: Inherit from the generic NAND device
+ * @id: Holds NAND ID
+ * @parameters: Holds generic parameters under an easily readable form
+ * @manufacturer: Manufacturer information
+ * @ops: NAND chip operations
+ * @legacy: All legacy fields/hooks. If you develop a new driver, don't even try
+ * to use any of these fields/hooks, and if you're modifying an
+ * existing driver that is using those fields/hooks, you should
+ * consider reworking the driver and avoid using them.
+ * @options: Various chip options. They can partly be set to inform nand_scan
+ * about special functionality. See the defines for further
+ * explanation.
+ * @current_interface_config: The currently used NAND interface configuration
+ * @best_interface_config: The best NAND interface configuration which fits both
+ * the NAND chip and NAND controller constraints. If
+ * unset, the default reset interface configuration must
+ * be used.
+ * @bbt_erase_shift: Number of address bits in a bbt entry
+ * @bbt_options: Bad block table specific options. All options used here must
+ * come from bbm.h. By default, these options will be copied to
+ * the appropriate nand_bbt_descr's.
+ * @badblockpos: Bad block marker position in the oob area
+ * @badblockbits: Minimum number of set bits in a good block's bad block marker
+ * position; i.e., BBM = 11110111b is good when badblockbits = 7
+ * @bbt_td: Bad block table descriptor for flash lookup
+ * @bbt_md: Bad block table mirror descriptor
+ * @badblock_pattern: Bad block scan pattern used for initial bad block scan
+ * @bbt: Bad block table pointer
+ * @page_shift: Number of address bits in a page (column address bits)
+ * @phys_erase_shift: Number of address bits in a physical eraseblock
+ * @chip_shift: Number of address bits in one chip
+ * @pagemask: Page number mask = number of (pages / chip) - 1
+ * @subpagesize: Holds the subpagesize
+ * @data_buf: Buffer for data, size is (page size + oobsize)
+ * @oob_poi: pointer on the OOB area covered by data_buf
+ * @pagecache: Structure containing page cache related fields
+ * @pagecache.bitflips: Number of bitflips of the cached page
+ * @pagecache.page: Page number currently in the cache. -1 means no page is
+ * currently cached
+ * @buf_align: Minimum buffer alignment required by a platform
+ * @lock: Lock protecting the suspended field. Also used to serialize accesses
+ * to the NAND device
+ * @suspended: Set to 1 when the device is suspended, 0 when it's not
+ * @cur_cs: Currently selected target. -1 means no target selected, otherwise we
+ * should always have cur_cs >= 0 && cur_cs < nanddev_ntargets().
+ * NAND Controller drivers should not modify this value, but they're
+ * allowed to read it.
+ * @read_retries: The number of read retry modes supported
+ * @controller: The hardware controller structure which is shared among multiple
+ * independent devices
+ * @ecc: The ECC controller structure
+ * @priv: Chip private data
+ */
struct nand_chip {
struct nand_device base;
-
+ struct nand_id id;
+ struct nand_parameters parameters;
+ struct nand_manufacturer manufacturer;
+ struct nand_chip_ops ops;
struct nand_legacy legacy;
+ unsigned int options;
- int (*setup_read_retry)(struct nand_chip *chip, int retry_mode);
+ /* Data interface */
+ const struct nand_interface_config *current_interface_config;
+ struct nand_interface_config *best_interface_config;
- unsigned int options;
+ /* Bad block information */
+ unsigned int bbt_erase_shift;
unsigned int bbt_options;
+ unsigned int badblockpos;
+ unsigned int badblockbits;
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
+ struct nand_bbt_descr *badblock_pattern;
+ u8 *bbt;
- int page_shift;
- int phys_erase_shift;
- int bbt_erase_shift;
- int chip_shift;
- int pagemask;
- u8 *data_buf;
+ /* Device internal layout */
+ unsigned int page_shift;
+ unsigned int phys_erase_shift;
+ unsigned int chip_shift;
+ unsigned int pagemask;
+ unsigned int subpagesize;
+ /* Buffers */
+ u8 *data_buf;
+ u8 *oob_poi;
struct {
unsigned int bitflips;
int page;
} pagecache;
+ unsigned long buf_align;
- int subpagesize;
- int onfi_timing_mode_default;
- unsigned int badblockpos;
- int badblockbits;
-
- struct nand_id id;
- struct nand_parameters parameters;
-
- struct nand_data_interface data_interface;
-
- int cur_cs;
-
- int read_retries;
-
+ /* Internals */
struct mutex lock;
unsigned int suspended : 1;
- int (*suspend)(struct nand_chip *chip);
- void (*resume)(struct nand_chip *chip);
+ int cur_cs;
+ int read_retries;
- uint8_t *oob_poi;
+ /* Externals */
struct nand_controller *controller;
-
struct nand_ecc_ctrl ecc;
- unsigned long buf_align;
-
- uint8_t *bbt;
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
-
- struct nand_bbt_descr *badblock_pattern;
-
void *priv;
-
- struct {
- const struct nand_manufacturer *desc;
- void *priv;
- } manufacturer;
-
- int (*lock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
- int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
};
extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
@@ -1209,6 +1206,17 @@ static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
return mtd_get_of_node(nand_to_mtd(chip));
}
+/**
+ * nand_get_interface_config - Retrieve the current interface configuration
+ * of a NAND chip
+ * @chip: The NAND chip
+ */
+static inline const struct nand_interface_config *
+nand_get_interface_config(struct nand_chip *chip)
+{
+ return chip->current_interface_config;
+}
+
/*
* A helper for defining older NAND chips where the second ID byte fully
* defined the chip, including the geometry (chip size, eraseblock size, page
@@ -1261,10 +1269,6 @@ static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
* @ecc_step_ds in nand_chip{}, also from the datasheet.
* For example, the "4bit ECC for each 512Byte" can be set with
* NAND_ECC_INFO(4, 512).
- * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
- * reset. Should be deduced from timings described
- * in the datasheet.
- *
*/
struct nand_flash_dev {
char *name;
@@ -1285,7 +1289,6 @@ struct nand_flash_dev {
uint16_t strength_ds;
uint16_t step_ds;
} ecc;
- int onfi_timing_mode_default;
};
int nand_create_bbt(struct nand_chip *chip);
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 1077c45721ff..7b78c4ba9b3e 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -309,7 +309,7 @@ struct spinand_info {
struct spinand_devid devid;
u32 flags;
struct nand_memory_organization memorg;
- struct nand_ecc_req eccreq;
+ struct nand_ecc_props eccreq;
struct spinand_ecc_info eccinfo;
struct {
const struct spinand_op_variants *read_cache;
diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h
index 4b48fbf7d343..65b9db936557 100644
--- a/include/uapi/mtd/mtd-abi.h
+++ b/include/uapi/mtd/mtd-abi.h
@@ -262,7 +262,7 @@ struct mtd_ecc_stats {
* @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
* @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
*
- * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * These modes can be set via ioctl(MTDFILEMODE). The mode will be retained
* separately for each open file descriptor.
*
* Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -