diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-09 12:38:51 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-09 12:38:51 -0700 |
commit | dec1fbbc1d7c46aed9fc1d3ee1f7f4fc04d6ed51 (patch) | |
tree | a2d88e9bb259c7866be2129dedf77a828ca8911a /drivers/mtd/nand/raw/marvell_nand.c | |
parent | 71fa1a4489ff93ac4acd7e6c5b00098ba53a4485 (diff) | |
parent | 6a1380271b75e0d9a961e192e56b733fedf7a23a (diff) | |
download | linux-dec1fbbc1d7c46aed9fc1d3ee1f7f4fc04d6ed51.tar.bz2 |
Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates
NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.
SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"
* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...
Diffstat (limited to 'drivers/mtd/nand/raw/marvell_nand.c')
-rw-r--r-- | drivers/mtd/nand/raw/marvell_nand.c | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 260a0430313e..8482d3bd8b1f 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -1096,6 +1096,8 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, const u8 *oob_buf, bool raw, int page) { + const struct nand_sdr_timings *sdr = + nand_get_sdr_timings(nand_get_interface_config(chip)); struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; @@ -1141,7 +1143,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, return ret; ret = marvell_nfc_wait_op(chip, - PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); + PSEC_TO_MSEC(sdr->tPROG_max)); return ret; } @@ -1562,6 +1564,8 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, const u8 *buf, int oob_required, int page) { + const struct nand_sdr_timings *sdr = + nand_get_sdr_timings(nand_get_interface_config(chip)); struct mtd_info *mtd = nand_to_mtd(chip); const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; const u8 *data = buf; @@ -1598,8 +1602,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, marvell_nfc_wait_ndrun(chip); } - ret = marvell_nfc_wait_op(chip, - PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); + ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max)); marvell_nfc_disable_hw_ecc(chip); @@ -2305,9 +2308,8 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = bbt_mirror_pattern }; -static int marvell_nfc_setup_data_interface(struct nand_chip *chip, int chipnr, - const struct nand_data_interface - *conf) +static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr, + const struct nand_interface_config *conf) { struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); @@ -2508,7 +2510,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip) static const struct nand_controller_ops marvell_nand_controller_ops = { .attach_chip = marvell_nand_attach_chip, .exec_op = marvell_nfc_exec_op, - .setup_data_interface = marvell_nfc_setup_data_interface, + .setup_interface = marvell_nfc_setup_interface, }; static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc, @@ -2644,7 +2646,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc, /* * Save a reference value for timing registers before - * ->setup_data_interface() is called. + * ->setup_interface() is called. */ marvell_nand->ndtr0 = readl_relaxed(nfc->regs + NDTR0); marvell_nand->ndtr1 = readl_relaxed(nfc->regs + NDTR1); |