Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v5.20

This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural.  The SOF and Intel DSP code both also continue to be very
actively developed.

 - Restructing of the set_fmt() callbacks to be specified in terms of
   the device rather than with semantics depending on if the device is
   supposed to be a CODEC or SoC, making things clearer in situations
   like CODEC to CODEC links.
 - Clean up of the way we flag which DAI naming scheme we use to reflect
   the progress that's been made modernising things.
 - Merge of more of the Intel AVS driver stack, including some board
   integrations.
 - New version 4 mechanism for communication with SOF DSPs.
 - Suppoort for dynamically selecting the PLL to use at runtime on i.MX
   platforms.
 - Improvements for CODEC to CODEC support in the generic cards.
 - Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
   Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
   TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
   TAS2780.

28 files changed, 678 insertions, 176 deletions

diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..3e63f79890b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
index b7e68b0dfa13..ca8d8661f872 100644
--- a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -50,13 +50,13 @@ properties:
 
   mboxes:
     items:
-      - description: ipc reply between host and audio DSP.
-      - description: ipc request between host and audio DSP.
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
 
   mbox-names:
     items:
-      - const: mbox0
-      - const: mbox1
+      - const: rx
+      - const: tx
 
   memory-region:
     items:
@@ -100,6 +100,6 @@ examples:
        memory-region = <&adsp_dma_mem_reserved>,
                        <&adsp_mem_reserved>;
        power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
-       mbox-names = "mbox0", "mbox1";
+       mbox-names = "rx", "tx";
        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
     };
diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
index ec4c10c2598a..8d2ef991db40 100644
--- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
@@ -24,6 +24,21 @@ properties:
     maxItems: 1
     description: I2C address of the device.
 
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  dvddio-supply:
+    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.
+
+  pvdd-supply:
+    description: A 3.0V to 20V supply that powers up the PVDD pin.
+
+  vbat-supply:
+    description: A 3.3V to 5.5V supply that powers up the VBAT pin.
+
   adi,vmon-slot-no:
     description: slot number of the voltage sense monitor
     $ref: "/schemas/types.yaml#/definitions/uint32"
@@ -36,13 +51,22 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 15
-    default: 0
+    default: 1
 
   adi,spkfb-slot-no:
     description: slot number of speaker DSP monitor
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 15
+    default: 2
+
+  adi,bypass-slot-no:
+    description:
+      Selects the PCM data input channel that is routed to the speaker
+      audio processing bypass path.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
     default: 0
 
   adi,interleave-mode:
@@ -72,6 +96,10 @@ examples:
         max98396: amplifier@39 {
             compatible = "adi,max98396";
             reg = <0x39>;
+            dvdd-supply = <&regulator_1v2>;
+            dvddio-supply = <&regulator_1v8>;
+            avdd-supply = <&regulator_1v8>;
+            pvdd-supply = <&regulator_pvdd>;
             adi,vmon-slot-no = <0>;
             adi,imon-slot-no = <1>;
             reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
index 3b764415c9ab..66859eb8f79a 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
@@ -21,6 +21,11 @@ properties:
     description:
       Regulator for the headphone amplifier
 
+  allwinner,internal-bias-resistor:
+    description:
+      Enable the internal 2.2K bias resistor between HBIAS and MICDET pins
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
index 0720857089a7..8facbce53db8 100644
--- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -16,7 +16,7 @@ Board connectors:
  * Line In Jack
 
 wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wm8731.txt
+cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
 
 Example:
 sound {
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
-   clocks. The controller expects one clock: the clock used as the sampling
-   rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
-   the core. The core expects one or two dma channels: one for transmit and
-   one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
-   parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-
-	soc_i2s: i2s@7ff90000 {
-		compatible = "snps,designware-i2s";
-		reg = <0x0 0x7ff90000 0x0 0x1000>;
-		clocks = <&scpi_i2sclk 0>;
-		clock-names = "i2sclk";
-		#sound-dai-cells = <0>;
-		dmas = <&dma0 5>;
-		dma-names = "tx";
-	};
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt
deleted file mode 100644
index 1ea05d4996c7..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,micfil.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP MICFIL Digital Audio Interface (MICFIL).
-
-The MICFIL digital interface provides a 16-bit audio signal from a PDM
-microphone bitstream in a configurable output sampling rate.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,imx8mm-micfil"
-			  or "fsl,imx8mp-micfil"
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the micfil interrupts.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "ipg_clk" for register access and
-			  "ipg_clk_app" for internal micfil clock.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-Example:
-micfil: micfil@30080000 {
-	compatible = "fsl,imx8mm-micfil";
-	reg = <0x0 0x30080000 0x0 0x10000>;
-	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clk IMX8MM_CLK_PDM_IPG>,
-		 <&clk IMX8MM_CLK_PDM_ROOT>;
-	clock-names = "ipg_clk", "ipg_clk_app";
-	dmas = <&sdma2 24 26 0x80000000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
new file mode 100644
index 000000000000..64d57758ee67
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MICFIL Digital Audio Interface (MICFIL)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The MICFIL digital interface provides a 16-bit or 24-bit audio signal
+  from a PDM microphone bitstream in a configurable output sampling rate.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-micfil
+      - fsl,imx8mp-micfil
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Digital Microphone interface interrupt
+      - description: Digital Microphone interface error interrupt
+      - description: voice activity detector event interrupt
+      - description: voice activity detector error interrupt
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: rx
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: internal micfil clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+      - description: External clock 3
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ipg_clk
+      - const: ipg_clk_app
+      - const: pll8k
+      - const: pll11k
+      - const: clkext3
+    minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    micfil: audio-controller@30080000 {
+        compatible = "fsl,imx8mm-micfil";
+        reg = <0x30080000 0x10000>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>;
+        clock-names = "ipg_clk", "ipg_clk_app";
+        dmas = <&sdma2 24 25 0>;
+        dma-names = "rx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
index 40353fc30255..d66284b8bef2 100644
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -2,7 +2,7 @@ fsl,mqs audio CODEC
 
 Required properties:
   - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
+		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
   - clocks : A list of phandles + clock-specifiers, one for each entry in
 	     clock-names
   - clock-names : "mclk" - must required.
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
index f226ec13167a..1d64e8337aa4 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
@@ -58,6 +58,8 @@ properties:
           slave of the Shared Peripheral Bus and when two or more bus masters
           (CPU, DMA or DSP) try to access it. This property is optional depending
           on the SoC design.
+      - description: PLL clock source for 8kHz series rate, optional.
+      - description: PLL clock source for 11khz series rate, optional.
     minItems: 9
 
   clock-names:
@@ -72,6 +74,8 @@ properties:
       - const: rxtx6
       - const: rxtx7
       - const: spba
+      - const: pll8k
+      - const: pll11k
     minItems: 9
 
   big-endian:
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index c71c5861d787..fbdefc3fade7 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -21,6 +21,9 @@ Required properties:
   - clock-names		: Must include the "bus" for register access and
 			  "mclk1", "mclk2", "mclk3" for bit clock and frame
 			  clock providing.
+                          "pll8k", "pll11k" are optional, they are the clock
+                          source for root clock, one is for 8kHz series rates
+                          another one is for 11kHz series rates.
   - dmas		: Generic dma devicetree binding as described in
 			  Documentation/devicetree/bindings/dma/dma.txt.
 
@@ -49,6 +52,14 @@ Required properties:
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 
+  - fsl,dataline        : configure the dataline. it has 3 value for each configuration
+                          first one means the type: I2S(1) or PDM(2)
+                          second one is dataline mask for 'rx'
+                          third one is dataline mask for 'tx'.
+                          for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
+                          it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
+                          rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).
+
 Optional properties:
 
   - big-endian		: Boolean property, required if all the SAI
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt
index 6c3baf7a5f21..7c84e7c7327a 100644
--- a/Documentation/devicetree/bindings/sound/nau8821.txt
+++ b/Documentation/devicetree/bindings/sound/nau8821.txt
@@ -34,7 +34,7 @@ Optional properties:
   - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
 
   - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
-
+  - nuvoton,key_enable: Headset button detection switch.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
index 6df6f858038c..47b6e712e4fb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -110,6 +110,10 @@ patternProperties:
     type: object
     $ref: nvidia,tegra186-asrc.yaml#
 
+  '^processing-engine@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-ope.yaml#
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
new file mode 100644
index 000000000000..5b9198602fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MBDRC
+
+description:
+  The Multi Band Dynamic Range Compressor (MBDRC) is part of Output
+  Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via
+  Audio Client Interface (ACIF). MBDRC can be used as a traditional
+  single full band or a dual band or a multi band dynamic processor.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mbdrc
+      - items:
+          - enum:
+              - nvidia,tegra234-mbdrc
+              - nvidia,tegra194-mbdrc
+              - nvidia,tegra186-mbdrc
+          - const: nvidia,tegra210-mbdrc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dynamic-range-compressor@702d8200 {
+        compatible = "nvidia,tegra210-mbdrc";
+        reg = <0x702d8200 0x200>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
new file mode 100644
index 000000000000..9dc9ba590fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 OPE
+
+description:
+  The Output Processing Engine (OPE) is one of the AHUB client. It has
+  PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor)
+  sub blocks for data processing.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-ope
+      - items:
+          - enum:
+              - nvidia,tegra234-ope
+              - nvidia,tegra194-ope
+              - nvidia,tegra186-ope
+          - const: nvidia,tegra210-ope
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  sound-name-prefix:
+    pattern: "^OPE[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+patternProperties:
+  '^equalizer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-peq.yaml#
+
+  '^dynamic-range-compressor@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mbdrc.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    processing-engine@702d8000 {
+        compatible = "nvidia,tegra210-ope";
+        reg = <0x702d8000 0x100>;
+        sound-name-prefix = "OPE1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
new file mode 100644
index 000000000000..1e373c49d639
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 PEQ
+
+description:
+  The Parametric Equalizer (PEQ) is a cascade of biquad filters with
+  each filter tuned based on certain parameters. It can be used to
+  equalize the irregularities in the speaker frequency response.
+  PEQ sits inside Output Processing Engine (OPE) which interfaces
+  with Audio Hub (AHUB) via Audio Client Interface (ACIF).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-peq
+      - items:
+          - enum:
+              - nvidia,tegra234-peq
+              - nvidia,tegra194-peq
+              - nvidia,tegra186-peq
+          - const: nvidia,tegra210-peq
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    equalizer@702d8100 {
+        compatible = "nvidia,tegra210-peq";
+        reg = <0x702d8100 0x100>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
index b9b1dba40856..7f2e68ff6d34 100644
--- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
+++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - nxp,tfa9890
       - nxp,tfa9895
       - nxp,tfa9897
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index e9a533080b32..ef18a572a1ff 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -25,12 +25,12 @@ properties:
       - qcom,sc7280-lpass-cpu
 
   reg:
-    minItems: 2
+    minItems: 1
     maxItems: 6
     description: LPAIF core registers
 
   reg-names:
-    minItems: 2
+    minItems: 1
     maxItems: 6
 
   clocks:
@@ -42,12 +42,12 @@ properties:
     maxItems: 10
 
   interrupts:
-    minItems: 2
+    minItems: 1
     maxItems: 4
     description: LPAIF DMA buffer interrupt
 
   interrupt-names:
-    minItems: 2
+    minItems: 1
     maxItems: 4
 
   qcom,adsp:
diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
deleted file mode 100644
index de4c604641da..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
-
-This binding describes the SDM845 sound card, which uses qdsp for audio.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be one of this
-			"qcom,sdm845-sndcard"
-			"qcom,db845c-sndcard"
-			"lenovo,yoga-c630-sndcard"
-
-- audio-routing:
-	Usage: Optional
-	Value type: <stringlist>
-	Definition:  A list of the connections between audio components.
-		  Each entry is a pair of strings, the first being the
-		  connection's sink, the second being the connection's
-		  source. Valid names could be power supplies, MicBias
-		  of codec and the jacks on the board.
-
-- model:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The user-visible name of this sound card.
-
-- aux-devs
-	Usage: optional
-	Value type: <array of phandles>
-	Definition: A list of phandles for auxiliary devices (e.g. analog
-		    amplifiers) that do not appear directly within the DAI
-		    links. Should be connected to another audio component
-		    using "audio-routing".
-
-= dailinks
-Each subnode of sndcard represents either a dailink, and subnodes of each
-dailinks would be cpu/codec/platform dais.
-
-- link-name:
-	Usage: required
-	Value type: <string>
-	Definition: User friendly name for dai link
-
-= CPU, PLATFORM, CODEC dais subnodes
-- cpu:
-	Usage: required
-	Value type: <subnode>
-	Definition: cpu dai sub-node
-
-- codec:
-	Usage: required
-	Value type: <subnode>
-	Definition: codec dai sub-node
-
-- platform:
-	Usage: Optional
-	Value type: <subnode>
-	Definition: platform dai sub-node
-
-- sound-dai:
-	Usage: required
-	Value type: <phandle>
-	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
-
-Example:
-
-audio {
-	compatible = "qcom,sdm845-sndcard";
-	model = "sdm845-snd-card";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
-	pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	pri-mi2s-dai-link {
-		link-name = "PRI MI2S Playback";
-		cpu {
-			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index 4ecd4080bb96..e6e27d09783e 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -16,8 +16,11 @@ description:
 properties:
   compatible:
     enum:
+      - lenovo,yoga-c630-sndcard
       - qcom,apq8016-sbc-sndcard
+      - qcom,db845c-sndcard
       - qcom,msm8916-qdsp6-sndcard
+      - qcom,sdm845-sndcard
       - qcom,sm8250-sndcard
       - qcom,qrb5165-rb5-sndcard
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
new file mode 100644
index 000000000000..6113f65f2990
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835
+  smart speaker amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA883X is the Qualcomm Aqstic smart speaker amplifier
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+properties:
+  compatible:
+    const: sdw10217020200
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD Supply for the Codec
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire-controller@3250000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x3250000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217020200";
+            reg = <0 1>;
+            powerdown-gpios = <&tlmm 1 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217020200";
+            reg = <0 2>;
+            powerdown-gpios = <&tlmm 89 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index 5ea16b8ef93f..7e36e389e976 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -61,6 +61,13 @@ properties:
           - const: tx
           - const: rx
 
+  pinctrl-names:
+    oneOf:
+      - const: default
+      - items:
+          - const: bclk_on
+          - const: bclk_off
+
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..4b0795819064
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+  - Jose Abreu <joabreu@synopsys.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: canaan,k210-i2s
+          - const: snps,designware-i2s
+      - enum:
+          - snps,designware-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The interrupt line number for the I2S controller. Add this
+      parameter if the I2S controller that you are using does not
+      support DMA.
+    maxItems: 1
+
+  clocks:
+    description: Sampling rate reference clock
+    maxItems: 1
+
+  clock-names:
+    const: i2sclk
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+    minItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: canaan,k210-i2s
+
+then:
+  properties:
+    "#sound-dai-cells":
+      const: 1
+
+else:
+  properties:
+    "#sound-dai-cells":
+      const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - dmas
+      - dma-names
+  - required:
+      - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc_i2s: i2s@7ff90000 {
+      compatible = "snps,designware-i2s";
+      reg = <0x7ff90000 0x1000>;
+      clocks = <&scpi_i2sclk 0>;
+      clock-names = "i2sclk";
+      #sound-dai-cells = <0>;
+      dmas = <&dma0 5>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/tas2780.yaml b/Documentation/devicetree/bindings/sound/tas2780.yaml
new file mode 100644
index 000000000000..5a0de0995066
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2780.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020-2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2780.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2780 Smart PA
+
+maintainers:
+  - Raphael Xu <raphael-xu@ti.com>
+
+description: |
+  The TAS2780 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2780
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x38 to 0x45.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@38 {
+       compatible = "ti,tas2780";
+       reg = <0x38>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpios = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...
diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst
index da9527502ef0..644f9200fd91 100644
--- a/Documentation/process/kernel-docs.rst
+++ b/Documentation/process/kernel-docs.rst
@@ -108,7 +108,7 @@ On-line docs
     * Title: **Writing an ALSA Driver**
 
       :Author: Takashi Iwai <tiwai@suse.de>
-      :URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html
+      :URL: https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html
       :Date: 2005
       :Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware.
       :Description: Advanced Linux Sound Architecture for developers,
diff --git a/Documentation/sound/soc/codec.rst b/Documentation/sound/soc/codec.rst
index 57df149acafc..af973c4cac93 100644
--- a/Documentation/sound/soc/codec.rst
+++ b/Documentation/sound/soc/codec.rst
@@ -132,7 +132,7 @@ The codec driver also supports the following ALSA PCM operations:-
   };
 
 Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
+https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html
 
 
 DAPM description
diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst
index 009b07e5a0f3..bf8431386d26 100644
--- a/Documentation/sound/soc/dai.rst
+++ b/Documentation/sound/soc/dai.rst
@@ -10,7 +10,7 @@ AC97
 ====
 
 AC97 is a five wire interface commonly found on many PC sound cards. It is
-now also popular in many portable devices. This DAI has a reset line and time
+now also popular in many portable devices. This DAI has a RESET line and time
 multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines.
 The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the
 frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
diff --git a/Documentation/sound/soc/platform.rst b/Documentation/sound/soc/platform.rst
index c1badea53d3d..7036630eaf01 100644
--- a/Documentation/sound/soc/platform.rst
+++ b/Documentation/sound/soc/platform.rst
@@ -46,7 +46,7 @@ snd_soc_component_driver:-
   };
 
 Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
+https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html
 
 An example DMA driver is soc/pxa/pxa2xx-pcm.c