From 45c6c5e052df2ee0d87e74743d8bb72e70fd0887 Mon Sep 17 00:00:00 2001 From: Sameer Pujar Date: Fri, 3 Jun 2022 12:06:07 +0530 Subject: ASoC: tegra: Add binding doc for OPE module This patch adds YAML schema for DT bindings of Output Processing Engine (OPE) module. It consists of Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor (MBDRC) sub blocks and binding doc for these blocks are added as well. The OPE will be registered as an ASoC component and can be plugged into an audio path as per need via ALSA mixer controls. The DT bindings are applicable on Tegra210 and later SoCs where OPE module is present. Signed-off-by: Sameer Pujar Link: https://lore.kernel.org/r/1654238172-16293-2-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown --- .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 ++++++++++++ .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++++++++++++++++++++++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 ++++++++++++ 4 files changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 6df6f858038c..47b6e712e4fb 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -110,6 +110,10 @@ patternProperties: type: object $ref: nvidia,tegra186-asrc.yaml# + '^processing-engine@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-ope.yaml# + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml new file mode 100644 index 000000000000..5b9198602fc6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 MBDRC + +description: + The Multi Band Dynamic Range Compressor (MBDRC) is part of Output + Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via + Audio Client Interface (ACIF). MBDRC can be used as a traditional + single full band or a dual band or a multi band dynamic processor. + +maintainers: + - Jon Hunter + - Mohan Kumar + - Sameer Pujar + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-mbdrc + - items: + - enum: + - nvidia,tegra234-mbdrc + - nvidia,tegra194-mbdrc + - nvidia,tegra186-mbdrc + - const: nvidia,tegra210-mbdrc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dynamic-range-compressor@702d8200 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8200 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml new file mode 100644 index 000000000000..9dc9ba590fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 OPE + +description: + The Output Processing Engine (OPE) is one of the AHUB client. It has + PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor) + sub blocks for data processing. + +maintainers: + - Jon Hunter + - Mohan Kumar + - Sameer Pujar + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-ope + - items: + - enum: + - nvidia,tegra234-ope + - nvidia,tegra194-ope + - nvidia,tegra186-ope + - const: nvidia,tegra210-ope + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + sound-name-prefix: + pattern: "^OPE[1-9]$" + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: + OPE ACIF (Audio Client Interface) input port. This is connected + to corresponding ACIF output port on AHUB (Audio Hub). + + port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + description: + OPE ACIF output port. This is connected to corresponding ACIF + input port on AHUB. + +patternProperties: + '^equalizer@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-peq.yaml# + + '^dynamic-range-compressor@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-mbdrc.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + processing-engine@702d8000 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8000 0x100>; + sound-name-prefix = "OPE1"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml new file mode 100644 index 000000000000..1e373c49d639 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra210 PEQ + +description: + The Parametric Equalizer (PEQ) is a cascade of biquad filters with + each filter tuned based on certain parameters. It can be used to + equalize the irregularities in the speaker frequency response. + PEQ sits inside Output Processing Engine (OPE) which interfaces + with Audio Hub (AHUB) via Audio Client Interface (ACIF). + +maintainers: + - Jon Hunter + - Mohan Kumar + - Sameer Pujar + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-peq + - items: + - enum: + - nvidia,tegra234-peq + - nvidia,tegra194-peq + - nvidia,tegra186-peq + - const: nvidia,tegra210-peq + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + equalizer@702d8100 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8100 0x100>; + }; + +... -- cgit v1.2.3 From d0da7c8668dc19df157d927a67721ca00e29ff2b Mon Sep 17 00:00:00 2001 From: Alexander Martinz Date: Thu, 2 Jun 2022 18:45:04 +0200 Subject: ASoC: dt-bindings: nxp,tfa989x: Add tfa9890 support Document TFA9890 binding for tfa989x. Signed-off-by: Alexander Martinz Reviewed-by: Stephan Gerhold Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220602164504.261361-2-amartinz@shiftphones.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml index b9b1dba40856..7f2e68ff6d34 100644 --- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - nxp,tfa9890 - nxp,tfa9895 - nxp,tfa9897 -- cgit v1.2.3 From 69c8027c5ff43d68449fda4510a8cce70e8578b0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 6 Jun 2022 16:25:44 +0100 Subject: ASoC: wm8731: update wlf,wm8731.yaml reference Changeset 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format") renamed: Documentation/devicetree/bindings/sound/wm8731.txt to: Documentation/devicetree/bindings/sound/wlf,wm8731.yaml. Update its cross-reference accordingly. Fixes: 0e336eeaf467 ("ASoC: wm8731: Convert DT bindings to YAML format") Signed-off-by: Mauro Carvalho Chehab Acked-by: Rob Herring Link: https://lore.kernel.org/r/e56e54fe0ebb1b6e8dd2e245c398190016eb0a34.1654529011.git.mchehab@kernel.org Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt index 0720857089a7..8facbce53db8 100644 --- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt +++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt @@ -16,7 +16,7 @@ Board connectors: * Line In Jack wm8731 pins: -cf Documentation/devicetree/bindings/sound/wm8731.txt +cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml Example: sound { -- cgit v1.2.3 From 81ae0635df7de58496def18b0b9333992630b9af Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 10 Jun 2022 13:47:21 +0800 Subject: ASoC: dt-bindings: fsl,mqs: Add compatible string for i.MX93 platform Add compatible string "fsl,imx93-mqs" for i.MX93 platform Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1654840042-7069-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl,mqs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt index 40353fc30255..d66284b8bef2 100644 --- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt +++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt @@ -2,7 +2,7 @@ fsl,mqs audio CODEC Required properties: - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs" - "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs". + "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs". - clocks : A list of phandles + clock-specifiers, one for each entry in clock-names - clock-names : "mclk" - must required. -- cgit v1.2.3 From d92c3d13e7650a324edcfb4ed934baaecd287bbf Mon Sep 17 00:00:00 2001 From: Judy Hsiao Date: Sun, 19 Jun 2022 09:53:24 +0000 Subject: ASoC: dt-bindings: rockchip: Document pinctrl-names for i2s This patch documents pinctrl-names for i2s. Signed-off-by: Judy Hsiao Link: https://lore.kernel.org/r/20220619095324.492678-4-judyhsiao@chromium.org Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rockchip-i2s.yaml | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 5ea16b8ef93f..7e36e389e976 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -61,6 +61,13 @@ properties: - const: tx - const: rx + pinctrl-names: + oneOf: + - const: default + - items: + - const: bclk_on + - const: bclk_off + power-domains: maxItems: 1 -- cgit v1.2.3 From 009b21f392759ca7be91bc4be9d9534f6cee2878 Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Wed, 22 Jun 2022 14:22:42 +0800 Subject: dt-bindings: dsp: mediatek: Use meaningful names for mbox Rename mbox according to actions instead of 'mbox0' and 'mbox1'. The 8195 dsp node, which uses this binding, has not yet been added to the 8195 devicetree. Signed-off-by: Tinghan Shen Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220622062245.21021-2-tinghan.shen@mediatek.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml index b7e68b0dfa13..ca8d8661f872 100644 --- a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml @@ -50,13 +50,13 @@ properties: mboxes: items: - - description: ipc reply between host and audio DSP. - - description: ipc request between host and audio DSP. + - description: mailbox for receiving audio DSP requests. + - description: mailbox for transmitting requests to audio DSP. mbox-names: items: - - const: mbox0 - - const: mbox1 + - const: rx + - const: tx memory-region: items: @@ -100,6 +100,6 @@ examples: memory-region = <&adsp_dma_mem_reserved>, <&adsp_mem_reserved>; power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP - mbox-names = "mbox0", "mbox1"; + mbox-names = "rx", "tx"; mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; }; -- cgit v1.2.3 From 99370c4ea3d0cee8445f6a1104f25667e3fd47ba Mon Sep 17 00:00:00 2001 From: Tinghan Shen Date: Wed, 22 Jun 2022 14:22:44 +0800 Subject: dt-bindings: dsp: mediatek: Add mt8186 dsp document This patch adds mt8186 dsp document. The dsp is used for Sound Open Firmware driver node. It includes registers, clocks, memory regions, and mailbox for dsp. Signed-off-by: Tinghan Shen Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220622062245.21021-4-tinghan.shen@mediatek.com Signed-off-by: Mark Brown --- .../bindings/dsp/mediatek,mt8186-dsp.yaml | 91 ++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml new file mode 100644 index 000000000000..3e63f79890b4 --- /dev/null +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek mt8186 DSP core + +maintainers: + - Tinghan Shen + +description: | + MediaTek mt8186 SoC contains a DSP core used for + advanced pre- and post- audio processing. + +properties: + compatible: + const: mediatek,mt8186-dsp + + reg: + items: + - description: Address and size of the DSP config registers + - description: Address and size of the DSP SRAM + - description: Address and size of the DSP secure registers + - description: Address and size of the DSP bus registers + + reg-names: + items: + - const: cfg + - const: sram + - const: sec + - const: bus + + clocks: + items: + - description: mux for audio dsp clock + - description: mux for audio dsp local bus + + clock-names: + items: + - const: audiodsp + - const: adsp_bus + + power-domains: + maxItems: 1 + + mboxes: + items: + - description: mailbox for receiving audio DSP requests. + - description: mailbox for transmitting requests to audio DSP. + + mbox-names: + items: + - const: rx + - const: tx + + memory-region: + items: + - description: dma buffer between host and DSP. + - description: DSP system memory. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - power-domains + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include + dsp@10680000 { + compatible = "mediatek,mt8186-dsp"; + reg = <0x10680000 0x2000>, + <0x10800000 0x100000>, + <0x1068b000 0x100>, + <0x1068f000 0x1000>; + reg-names = "cfg", "sram", "sec", "bus"; + clocks = <&topckgen CLK_TOP_AUDIODSP>, + <&topckgen CLK_TOP_ADSP_BUS>; + clock-names = "audiodsp", + "adsp_bus"; + power-domains = <&spm 6>; + mbox-names = "rx", "tx"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + }; -- cgit v1.2.3 From d9bd3aea31aba94b5811776e0817a15ea4420e84 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 24 Jun 2022 12:47:05 +0200 Subject: ASoC: dt-bindings: max98396: add voltage supplies The device is supplied with 3 core voltages (DVVDIO, DVDD, AVDD), and PVDD and/or VBAT. Signed-off-by: Daniel Mack Link: https://lore.kernel.org/r/20220624104712.1934484-2-daniel@zonque.org Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/adi,max98396.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index ec4c10c2598a..a23ac8036e1c 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -24,6 +24,21 @@ properties: maxItems: 1 description: I2C address of the device. + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.2V supply that powers up the DVDD pin. + + dvddio-supply: + description: A 1.2V or 1.8V supply that powers up the VDDIO pin. + + pvdd-supply: + description: A 3.0V to 20V supply that powers up the PVDD pin. + + vbat-supply: + description: A 3.3V to 5.5V supply that powers up the VBAT pin. + adi,vmon-slot-no: description: slot number of the voltage sense monitor $ref: "/schemas/types.yaml#/definitions/uint32" @@ -72,6 +87,10 @@ examples: max98396: amplifier@39 { compatible = "adi,max98396"; reg = <0x39>; + dvdd-supply = <®ulator_1v2>; + dvddio-supply = <®ulator_1v8>; + avdd-supply = <®ulator_1v8>; + pvdd-supply = <®ulator_pvdd>; adi,vmon-slot-no = <0>; adi,imon-slot-no = <1>; reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 0ce44afd29768e893ff9112ba208271e0d558780 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 24 Jun 2022 12:47:07 +0200 Subject: ASoC: dt-bindings: max98396: Document adi,bypass-slot-no This property allows to select the PCM data input channel that is routed to the speaker audio processing bypass path. The driver already implements this property. While at it, fix the default value for adi,imon-slot-no. Signed-off-by: Daniel Mack Link: https://lore.kernel.org/r/20220624104712.1934484-4-daniel@zonque.org Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/adi,max98396.yaml | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index a23ac8036e1c..8d2ef991db40 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -51,13 +51,22 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 15 - default: 0 + default: 1 adi,spkfb-slot-no: description: slot number of speaker DSP monitor $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 15 + default: 2 + + adi,bypass-slot-no: + description: + Selects the PCM data input channel that is routed to the speaker + audio processing bypass path. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 default: 0 adi,interleave-mode: -- cgit v1.2.3 From 24e0b04dd42be34ec4b18dc1a1e139d66eb572a3 Mon Sep 17 00:00:00 2001 From: Arnaud Ferraris Date: Mon, 20 Jun 2022 22:54:50 -0500 Subject: ASoC: dt-bindings: sun50i-codec: Add binding for internal bias In order to properly bias headset microphones, there should be a pull-up resistor between pins HBIAS and MIC2P. This can be an external resistor, but the codec also provides an internal 2.2K resistor which is enabled by a register. This patch adds a device-tree property to the sun50i-codec-analog driver to take advantage of this feature. Signed-off-by: Arnaud Ferraris [Samuel: split binding and implementation patches] Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20220621035452.60272-2-samuel@sholland.org Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml index 3b764415c9ab..66859eb8f79a 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml @@ -21,6 +21,11 @@ properties: description: Regulator for the headphone amplifier + allwinner,internal-bias-resistor: + description: + Enable the internal 2.2K bias resistor between HBIAS and MICDET pins + type: boolean + required: - compatible - reg -- cgit v1.2.3 From 6b878ac2711056dd07c712caf89f58449cf5a592 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 17 Jun 2022 15:44:36 +0800 Subject: ASoC: dt-bindings: fsl-sai: Add new property to configure dataline "fsl,dataline" is added to configure the dataline of SAI. It has 3 value for each configuration, first one means the type: I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is dataline mask for 'tx'. for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>, it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1655451877-16382-7-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index c71c5861d787..4c66e6a1a533 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -49,6 +49,14 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately. + - fsl,dataline : configure the dataline. it has 3 value for each configuration + first one means the type: I2S(1) or PDM(2) + second one is dataline mask for 'rx' + third one is dataline mask for 'tx'. + for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>; + it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type + rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). + Optional properties: - big-endian : Boolean property, required if all the SAI -- cgit v1.2.3 From 16e2f8a4e9d5e4c7653ee774d9377d602070b16e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 29 Jun 2022 10:06:41 +0100 Subject: ASoC: dt-bindings: Add WSA883x bindings This patch adds bindings for WSA883x Smart Speaker Amplifier. This Amplifier also has a simple thermal sensor for temperature measurments with speaker protection. Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220629090644.67982-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,wsa883x.yaml | 74 ++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml new file mode 100644 index 000000000000..6113f65f2990 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835 + smart speaker amplifier + +maintainers: + - Srinivas Kandagatla + +description: | + WSA883X is the Qualcomm Aqstic smart speaker amplifier + Their primary operating mode uses a SoundWire digital audio + interface. This binding is for SoundWire interface. + +properties: + compatible: + const: sdw10217020200 + + reg: + maxItems: 1 + + powerdown-gpios: + description: GPIO spec for Powerdown/Shutdown line to use + maxItems: 1 + + vdd-supply: + description: VDD Supply for the Codec + + '#thermal-sensor-cells': + const: 0 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - vdd-supply + - powerdown-gpios + - "#thermal-sensor-cells" + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + soundwire-controller@3250000 { + #address-cells = <2>; + #size-cells = <0>; + reg = <0x3250000 0x2000>; + + speaker@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + powerdown-gpios = <&tlmm 1 0>; + vdd-supply = <&vreg_s10b_1p8>; + #thermal-sensor-cells = <0>; + #sound-dai-cells = <0>; + }; + + speaker@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + powerdown-gpios = <&tlmm 89 0>; + vdd-supply = <&vreg_s10b_1p8>; + #thermal-sensor-cells = <0>; + #sound-dai-cells = <0>; + }; + }; + +... -- cgit v1.2.3 From 02d91fe47100a29a79fcb8798e45c22591ca852d Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 28 Jun 2022 11:13:25 +0800 Subject: ASoC: dt-bindings: fsl,micfil: Convert format to json-schema Convert the NXP MICFIL binding to DT schema format using json-schema. Signed-off-by: Shengjiu Wang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/1656386005-29376-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/fsl,micfil.txt | 33 --------- .../devicetree/bindings/sound/fsl,micfil.yaml | 85 ++++++++++++++++++++++ 2 files changed, 85 insertions(+), 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/fsl,micfil.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl,micfil.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt deleted file mode 100644 index 1ea05d4996c7..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,micfil.txt +++ /dev/null @@ -1,33 +0,0 @@ -NXP MICFIL Digital Audio Interface (MICFIL). - -The MICFIL digital interface provides a 16-bit audio signal from a PDM -microphone bitstream in a configurable output sampling rate. - -Required properties: - - - compatible : Compatible list, contains "fsl,imx8mm-micfil" - or "fsl,imx8mp-micfil" - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the micfil interrupts. - - - clocks : Must contain an entry for each entry in clock-names. - - - clock-names : Must include the "ipg_clk" for register access and - "ipg_clk_app" for internal micfil clock. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - -Example: -micfil: micfil@30080000 { - compatible = "fsl,imx8mm-micfil"; - reg = <0x0 0x30080000 0x0 0x10000>; - interrupts = , - ; - clocks = <&clk IMX8MM_CLK_PDM_IPG>, - <&clk IMX8MM_CLK_PDM_ROOT>; - clock-names = "ipg_clk", "ipg_clk_app"; - dmas = <&sdma2 24 26 0x80000000>; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml new file mode 100644 index 000000000000..64d57758ee67 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,micfil.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP MICFIL Digital Audio Interface (MICFIL) + +maintainers: + - Shengjiu Wang + +description: | + The MICFIL digital interface provides a 16-bit or 24-bit audio signal + from a PDM microphone bitstream in a configurable output sampling rate. + +properties: + compatible: + enum: + - fsl,imx8mm-micfil + - fsl,imx8mp-micfil + + reg: + maxItems: 1 + + interrupts: + items: + - description: Digital Microphone interface interrupt + - description: Digital Microphone interface error interrupt + - description: voice activity detector event interrupt + - description: voice activity detector error interrupt + + dmas: + items: + - description: DMA controller phandle and request line for RX + + dma-names: + items: + - const: rx + + clocks: + items: + - description: The ipg clock for register access + - description: internal micfil clock + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + - description: External clock 3 + minItems: 2 + + clock-names: + items: + - const: ipg_clk + - const: ipg_clk_app + - const: pll8k + - const: pll11k + - const: clkext3 + minItems: 2 + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = , + , + , + ; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>; + clock-names = "ipg_clk", "ipg_clk_app"; + dmas = <&sdma2 24 25 0>; + dma-names = "rx"; + }; -- cgit v1.2.3 From d15534a6f4cff031f1233154f1e275302c03e5d4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 28 Jun 2022 18:58:07 +0200 Subject: ASoC: doc: Update dead links The alsa-project documentation is now part of the kernel docs, the original links are long dead, update links. Signed-off-by: Marek Vasut Cc: Mark Brown Cc: Takashi Iwai Link: https://lore.kernel.org/r/20220628165807.152191-1-marex@denx.de Signed-off-by: Mark Brown --- Documentation/process/kernel-docs.rst | 2 +- Documentation/sound/soc/codec.rst | 2 +- Documentation/sound/soc/platform.rst | 2 +- sound/pci/ens1370.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst index da9527502ef0..644f9200fd91 100644 --- a/Documentation/process/kernel-docs.rst +++ b/Documentation/process/kernel-docs.rst @@ -108,7 +108,7 @@ On-line docs * Title: **Writing an ALSA Driver** :Author: Takashi Iwai - :URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html + :URL: https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html :Date: 2005 :Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware. :Description: Advanced Linux Sound Architecture for developers, diff --git a/Documentation/sound/soc/codec.rst b/Documentation/sound/soc/codec.rst index 57df149acafc..af973c4cac93 100644 --- a/Documentation/sound/soc/codec.rst +++ b/Documentation/sound/soc/codec.rst @@ -132,7 +132,7 @@ The codec driver also supports the following ALSA PCM operations:- }; Please refer to the ALSA driver PCM documentation for details. -http://www.alsa-project.org/~iwai/writing-an-alsa-driver/ +https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html DAPM description diff --git a/Documentation/sound/soc/platform.rst b/Documentation/sound/soc/platform.rst index c1badea53d3d..7036630eaf01 100644 --- a/Documentation/sound/soc/platform.rst +++ b/Documentation/sound/soc/platform.rst @@ -46,7 +46,7 @@ snd_soc_component_driver:- }; Please refer to the ALSA driver documentation for details of audio DMA. -http://www.alsa-project.org/~iwai/writing-an-alsa-driver/ +https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html An example DMA driver is soc/pxa/pxa2xx-pcm.c diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 94efe347a97a..89210b2c7342 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -8,7 +8,7 @@ /* Power-Management-Code ( CONFIG_PM ) * for ens1371 only ( FIXME ) * derived from cs4281.c, atiixp.c and via82xx.c - * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ + * using https://www.kernel.org/doc/html/latest/sound/kernel-api/writing-an-alsa-driver.html * by Kurt J. Bosch */ -- cgit v1.2.3 From bc4c9d85179ca90679c8bb046cf7aad16fb88076 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Fri, 1 Jul 2022 20:22:49 +0100 Subject: ASoC: dt-bindings: convert designware-i2s to dt-schema Convert the Synopsys DesignWare I2S controller binding to dt-schema. There was no listed maintainer but Jose Abreu was the last editor of the txt binding so add him as maintainer. Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220701192300.2293643-4-conor@kernel.org Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/designware-i2s.txt | 35 -------- .../bindings/sound/snps,designware-i2s.yaml | 94 ++++++++++++++++++++++ 2 files changed, 94 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt deleted file mode 100644 index 6a536d570e29..000000000000 --- a/Documentation/devicetree/bindings/sound/designware-i2s.txt +++ /dev/null @@ -1,35 +0,0 @@ -DesignWare I2S controller - -Required properties: - - compatible : Must be "snps,designware-i2s" - - reg : Must contain the I2S core's registers location and length - - clocks : Pairs of phandle and specifier referencing the controller's - clocks. The controller expects one clock: the clock used as the sampling - rate reference clock sample. - - clock-names : "i2sclk" for the sample rate reference clock. - - dmas: Pairs of phandle and specifier for the DMA channels that are used by - the core. The core expects one or two dma channels: one for transmit and - one for receive. - - dma-names : "tx" for the transmit channel, "rx" for the receive channel. - -Optional properties: - - interrupts: The interrupt line number for the I2S controller. Add this - parameter if the I2S controller that you are using does not support DMA. - -For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' -properties please check: - * resource-names.txt - * clock/clock-bindings.txt - * dma/dma.txt - -Example: - - soc_i2s: i2s@7ff90000 { - compatible = "snps,designware-i2s"; - reg = <0x0 0x7ff90000 0x0 0x1000>; - clocks = <&scpi_i2sclk 0>; - clock-names = "i2sclk"; - #sound-dai-cells = <0>; - dmas = <&dma0 5>; - dma-names = "tx"; - }; diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml new file mode 100644 index 000000000000..4b0795819064 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare I2S controller + +maintainers: + - Jose Abreu + +properties: + compatible: + oneOf: + - items: + - const: canaan,k210-i2s + - const: snps,designware-i2s + - enum: + - snps,designware-i2s + + reg: + maxItems: 1 + + interrupts: + description: | + The interrupt line number for the I2S controller. Add this + parameter if the I2S controller that you are using does not + support DMA. + maxItems: 1 + + clocks: + description: Sampling rate reference clock + maxItems: 1 + + clock-names: + const: i2sclk + + resets: + maxItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + minItems: 1 + + dma-names: + items: + - const: tx + - const: rx + minItems: 1 + +if: + properties: + compatible: + contains: + const: canaan,k210-i2s + +then: + properties: + "#sound-dai-cells": + const: 1 + +else: + properties: + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + +oneOf: + - required: + - dmas + - dma-names + - required: + - interrupts + +unevaluatedProperties: false + +examples: + - | + soc_i2s: i2s@7ff90000 { + compatible = "snps,designware-i2s"; + reg = <0x7ff90000 0x1000>; + clocks = <&scpi_i2sclk 0>; + clock-names = "i2sclk"; + #sound-dai-cells = <0>; + dmas = <&dma0 5>; + dma-names = "tx"; + }; -- cgit v1.2.3 From df0835a810c1585bd54ffb10db92b455e922c7ec Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 1 Jul 2022 17:32:40 +0800 Subject: ASoC: dt-bindings: fsl_spdif: Add two PLL clock source Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates. Signed-off-by: Shengjiu Wang Acked-by: Rob Herring Link: https://lore.kernel.org/r/1656667961-1799-6-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl,spdif.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index f226ec13167a..1d64e8337aa4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -58,6 +58,8 @@ properties: slave of the Shared Peripheral Bus and when two or more bus masters (CPU, DMA or DSP) try to access it. This property is optional depending on the SoC design. + - description: PLL clock source for 8kHz series rate, optional. + - description: PLL clock source for 11khz series rate, optional. minItems: 9 clock-names: @@ -72,6 +74,8 @@ properties: - const: rxtx6 - const: rxtx7 - const: spba + - const: pll8k + - const: pll11k minItems: 9 big-endian: -- cgit v1.2.3 From 6c06ad34eda9e1990313ff80999e1a75a02fa1c0 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 1 Jul 2022 17:32:41 +0800 Subject: ASoC: dt-bindings: fsl-sai: Add two PLL clock source Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates. Signed-off-by: Shengjiu Wang Acked-by: Rob Herring Link: https://lore.kernel.org/r/1656667961-1799-7-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 4c66e6a1a533..fbdefc3fade7 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -21,6 +21,9 @@ Required properties: - clock-names : Must include the "bus" for register access and "mclk1", "mclk2", "mclk3" for bit clock and frame clock providing. + "pll8k", "pll11k" are optional, they are the clock + source for root clock, one is for 8kHz series rates + another one is for 11kHz series rates. - dmas : Generic dma devicetree binding as described in Documentation/devicetree/bindings/dma/dma.txt. -- cgit v1.2.3 From 50791dcb7de32f9f78061f7f460966ac5616b38e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 5 Jul 2022 20:28:02 +0200 Subject: ASoC: dt-bindings: qcom,sm8250: add SDM845 sound The Qualcomm SDM845 sound card bindings are almost the same as SM8250, except "pin-switches" and "widgets" properties. These were not documented in SDM845 text bindings but are actually valid for SDM845. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Stephan Gerhold Link: https://lore.kernel.org/r/20220705182802.775803-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,sdm845.txt | 91 ---------------------- .../devicetree/bindings/sound/qcom,sm8250.yaml | 3 + 2 files changed, 3 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,sdm845.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt deleted file mode 100644 index de4c604641da..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt +++ /dev/null @@ -1,91 +0,0 @@ -* Qualcomm Technologies Inc. SDM845 ASoC sound card driver - -This binding describes the SDM845 sound card, which uses qdsp for audio. - -- compatible: - Usage: required - Value type: - Definition: must be one of this - "qcom,sdm845-sndcard" - "qcom,db845c-sndcard" - "lenovo,yoga-c630-sndcard" - -- audio-routing: - Usage: Optional - Value type: - Definition: A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names could be power supplies, MicBias - of codec and the jacks on the board. - -- model: - Usage: required - Value type: - Definition: The user-visible name of this sound card. - -- aux-devs - Usage: optional - Value type: - Definition: A list of phandles for auxiliary devices (e.g. analog - amplifiers) that do not appear directly within the DAI - links. Should be connected to another audio component - using "audio-routing". - -= dailinks -Each subnode of sndcard represents either a dailink, and subnodes of each -dailinks would be cpu/codec/platform dais. - -- link-name: - Usage: required - Value type: - Definition: User friendly name for dai link - -= CPU, PLATFORM, CODEC dais subnodes -- cpu: - Usage: required - Value type: - Definition: cpu dai sub-node - -- codec: - Usage: required - Value type: - Definition: codec dai sub-node - -- platform: - Usage: Optional - Value type: - Definition: platform dai sub-node - -- sound-dai: - Usage: required - Value type: - Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. - -Example: - -audio { - compatible = "qcom,sdm845-sndcard"; - model = "sdm845-snd-card"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>; - pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - pri-mi2s-dai-link { - link-name = "PRI MI2S Playback"; - cpu { - sound-dai = <&q6afedai PRIMARY_MI2S_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 4ecd4080bb96..e6e27d09783e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -16,8 +16,11 @@ description: properties: compatible: enum: + - lenovo,yoga-c630-sndcard - qcom,apq8016-sbc-sndcard + - qcom,db845c-sndcard - qcom,msm8916-qdsp6-sndcard + - qcom,sdm845-sndcard - qcom,sm8250-sndcard - qcom,qrb5165-rb5-sndcard -- cgit v1.2.3 From 0735e400fa07a3687797f241f5b74d77a6d383c7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 28 Jun 2022 18:58:40 +0200 Subject: ASoC: doc: Capitalize RESET line name Make sure all AC97 interface lines are spelled in capitals, to avoid confusing readers about where the 5th line is. Signed-off-by: Marek Vasut Cc: Mark Brown Cc: Takashi Iwai Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.de Signed-off-by: Mark Brown --- Documentation/sound/soc/dai.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst index 009b07e5a0f3..bf8431386d26 100644 --- a/Documentation/sound/soc/dai.rst +++ b/Documentation/sound/soc/dai.rst @@ -10,7 +10,7 @@ AC97 ==== AC97 is a five wire interface commonly found on many PC sound cards. It is -now also popular in many portable devices. This DAI has a reset line and time +now also popular in many portable devices. This DAI has a RESET line and time multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines. The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 -- cgit v1.2.3 From 94c65dffd4c4af052b3ea8934fbcb2fa8da276a8 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Wed, 29 Jun 2022 12:40:12 +0100 Subject: ASoC: dt-bindings: Fix description for msm8916 For the existing msm8916 bindings the minimum reg/reg-names is 1 not 2. Similarly the minimum interrupt/interrupt-names is 1 not 2. Fixes: f3fc4fbfa2d2 ("ASoC: dt-bindings: Add SC7280 lpass cpu bindings") Signed-off-by: Bryan O'Donoghue Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220629114012.3282945-1-bryan.odonoghue@linaro.org Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index e9a533080b32..ef18a572a1ff 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -25,12 +25,12 @@ properties: - qcom,sc7280-lpass-cpu reg: - minItems: 2 + minItems: 1 maxItems: 6 description: LPAIF core registers reg-names: - minItems: 2 + minItems: 1 maxItems: 6 clocks: @@ -42,12 +42,12 @@ properties: maxItems: 10 interrupts: - minItems: 2 + minItems: 1 maxItems: 4 description: LPAIF DMA buffer interrupt interrupt-names: - minItems: 2 + minItems: 1 maxItems: 4 qcom,adsp: -- cgit v1.2.3 From a6426e7189e09bdf8decffd8a539f3727b672d3e Mon Sep 17 00:00:00 2001 From: Raphael-Xu <13691752556@139.com> Date: Thu, 7 Jul 2022 20:33:43 +0800 Subject: ASoC: add tas2780 DT binding add tas2780.yaml Signed-off-by: Raphael-Xu <13691752556@139.com> Link: https://lore.kernel.org/r/20220707123343.2403-2-13691752556@139.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/tas2780.yaml | 72 ++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2780.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/tas2780.yaml b/Documentation/devicetree/bindings/sound/tas2780.yaml new file mode 100644 index 000000000000..5a0de0995066 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2780.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020-2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2780.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2780 Smart PA + +maintainers: + - Raphael Xu + +description: | + The TAS2780 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2780 + + reg: + maxItems: 1 + description: | + I2C address of the device can be between 0x38 to 0x45. + + reset-gpios: + maxItems: 1 + description: GPIO used to reset the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@38 { + compatible = "ti,tas2780"; + reg = <0x38>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpios = <&gpio1 15 0>; + shutdown-gpios = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + +... -- cgit v1.2.3 From 2551b6e89936f98406bce9c1d50110e3ff443f81 Mon Sep 17 00:00:00 2001 From: Seven Lee Date: Mon, 27 Jun 2022 11:29:59 +0800 Subject: ASoC: nau8821: Add headset button detection This patch adds the function of headphone button detection, Button detection will be enabled if the device tree has a key_enable property. Signed-off-by: Seven Lee Link: https://lore.kernel.org/r/20220627032959.3442064-1-wtli@nuvoton.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/nau8821.txt | 2 +- sound/soc/codecs/nau8821.c | 35 ++++++++++++++++++++++ sound/soc/codecs/nau8821.h | 1 + 3 files changed, 37 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt index 6c3baf7a5f21..7c84e7c7327a 100644 --- a/Documentation/devicetree/bindings/sound/nau8821.txt +++ b/Documentation/devicetree/bindings/sound/nau8821.txt @@ -34,7 +34,7 @@ Optional properties: - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - + - nuvoton,key_enable: Headset button detection switch. Example: diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c index 6453e93678d2..2600be250a3c 100644 --- a/sound/soc/codecs/nau8821.c +++ b/sound/soc/codecs/nau8821.c @@ -29,6 +29,8 @@ #define NAU_FVCO_MAX 100000000 #define NAU_FVCO_MIN 90000000 +#define NAU8821_BUTTON SND_JACK_BTN_0 + /* the maximum frequency of CLK_ADC and CLK_DAC */ #define CLK_DA_AD_MAX 6144000 @@ -911,6 +913,20 @@ static void nau8821_eject_jack(struct nau8821 *nau8821) /* Recover to normal channel input */ regmap_update_bits(regmap, NAU8821_R2B_ADC_RATE, NAU8821_ADC_R_SRC_EN, 0); + if (nau8821->key_enable) { + regmap_update_bits(regmap, NAU8821_R0F_INTERRUPT_MASK, + NAU8821_IRQ_KEY_RELEASE_EN | + NAU8821_IRQ_KEY_PRESS_EN, + NAU8821_IRQ_KEY_RELEASE_EN | + NAU8821_IRQ_KEY_PRESS_EN); + regmap_update_bits(regmap, + NAU8821_R12_INTERRUPT_DIS_CTRL, + NAU8821_IRQ_KEY_RELEASE_DIS | + NAU8821_IRQ_KEY_PRESS_DIS, + NAU8821_IRQ_KEY_RELEASE_DIS | + NAU8821_IRQ_KEY_PRESS_DIS); + } + } static void nau8821_jdet_work(struct work_struct *work) @@ -940,6 +956,15 @@ static void nau8821_jdet_work(struct work_struct *work) */ regmap_update_bits(regmap, NAU8821_R2B_ADC_RATE, NAU8821_ADC_R_SRC_EN, NAU8821_ADC_R_SRC_EN); + if (nau8821->key_enable) { + regmap_update_bits(regmap, NAU8821_R0F_INTERRUPT_MASK, + NAU8821_IRQ_KEY_RELEASE_EN | + NAU8821_IRQ_KEY_PRESS_EN, 0); + regmap_update_bits(regmap, + NAU8821_R12_INTERRUPT_DIS_CTRL, + NAU8821_IRQ_KEY_RELEASE_DIS | + NAU8821_IRQ_KEY_PRESS_DIS, 0); + } } else { dev_dbg(nau8821->dev, "Headphone connected\n"); event |= SND_JACK_HEADPHONE; @@ -999,6 +1024,13 @@ static irqreturn_t nau8821_interrupt(int irq, void *data) nau8821_eject_jack(nau8821); event_mask |= SND_JACK_HEADSET; clear_irq = NAU8821_JACK_EJECT_IRQ_MASK; + } else if (active_irq & NAU8821_KEY_SHORT_PRESS_IRQ) { + event |= NAU8821_BUTTON; + event_mask |= NAU8821_BUTTON; + clear_irq = NAU8821_KEY_SHORT_PRESS_IRQ; + } else if (active_irq & NAU8821_KEY_RELEASE_IRQ) { + event_mask = NAU8821_BUTTON; + clear_irq = NAU8821_KEY_RELEASE_IRQ; } else if ((active_irq & NAU8821_JACK_INSERT_IRQ_MASK) == NAU8821_JACK_INSERT_DETECTED) { regmap_update_bits(regmap, NAU8821_R71_ANALOG_ADC_1, @@ -1489,6 +1521,7 @@ static void nau8821_print_device_properties(struct nau8821 *nau8821) nau8821->jack_eject_debounce); dev_dbg(dev, "dmic-clk-threshold: %d\n", nau8821->dmic_clk_threshold); + dev_dbg(dev, "key_enable: %d\n", nau8821->key_enable); } static int nau8821_read_device_properties(struct device *dev, @@ -1502,6 +1535,8 @@ static int nau8821_read_device_properties(struct device *dev, "nuvoton,jkdet-pull-enable"); nau8821->jkdet_pull_up = device_property_read_bool(dev, "nuvoton,jkdet-pull-up"); + nau8821->key_enable = device_property_read_bool(dev, + "nuvoton,key-enable"); ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity", &nau8821->jkdet_polarity); if (ret) diff --git a/sound/soc/codecs/nau8821.h b/sound/soc/codecs/nau8821.h index a92edfeb9d3a..c44251f54d48 100644 --- a/sound/soc/codecs/nau8821.h +++ b/sound/soc/codecs/nau8821.h @@ -525,6 +525,7 @@ struct nau8821 { int jack_eject_debounce; int fs; int dmic_clk_threshold; + int key_enable; }; int nau8821_enable_jack_detect(struct snd_soc_component *component, -- cgit v1.2.3