Merge tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "Core MTD changes:
   - mtdchar: add MEMREAD ioctl
   - Add ECC error accounting for each read request
   - always initialize 'stats' in struct mtd_oob_ops
   - Track maximum number of bitflips for each read request
   - Fix repeated word in comment
   - Move from strlcpy with unused retval to strscpy
   - Fix a typo in a comment
   - Add binding for U-Boot bootloader partitions

  MTD device drivers changes:
   - FTL: use container_of() rather than cast
   - docg3:
      - Use correct function names in comment blocks
      - Check the return value of devm_ioremap() in the probe
   - physmap-core: Fix NULL pointer dereferencing in
     of_select_probe_type()
   - parsers: add Broadcom's U-Boot parser

  Raw NAND core changes:
   - Replace of_gpio_named_count() by gpiod_count()
   - Remove misguided comment of nand_get_device()
   - bbt: Use the bitmap API to allocate bitmaps

  Raw NAND controller drivers changes:
   - Meson:
      - Stop supporting legacy clocks
      - Refine resource getting in probe
      - Convert bindings to yaml
      - Fix clock handling and update the bindings accordingly
      - Fix bit map use in meson_nfc_ecc_correct()
   - bcm47xx:
      - Fix spelling typo in comment
   - STM32 FMC2:
      - Switch to using devm_fwnode_gpiod_get()
      - Fix dma_map_sg error check
   - Cadence:
      - Remove an unneeded result variable
   - Marvell:
      - Fix error handle regarding dma_map_sg
   - Orion:
      - Use devm_clk_get_optional()
   - Cafe:
      - Use correct function name in comment block
   - Atmel:
      - Unmap streaming DMA mappings
   - Arasan:
      - Stop using 0 as NULL pointer
   - GPMI:
      - Fix typo 'the the' in comment
   - BRCM:
      - Add individual glue driver selection
      - Move Kconfig to driver folder
   - FSL: Fix none ECC mode
   - Intel:
      - Use devm_platform_ioremap_resource_byname()
      - Remove unused clk_rate member from struct ebu_nand
      - Remove unused nand_pa member from ebu_nand_cs
      - Don't re-define NAND_DATA_IFACE_CHECK_ONLY
      - Remove undocumented compatible string
      - Fix compatible string in the bindings
      - Read the chip-select line from the correct OF node
      - Fix maximum chip select value in the bindings"

* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
  mtd: rawnand: meson: stop supporting legacy clocks
  dt-bindings: nand: meson: convert txt to yaml
  mtd: rawnand: meson: refine resource getting in probe
  mtd: rawnand: meson: fix the clock
  dt-bindings: nand: meson: fix meson nfc clock
  mtd: rawnand: bcm47xx: fix spelling typo in comment
  mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
  mtd: rawnand: cadence: Remove an unneeded result variable
  mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
  mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
  mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
  mtd: rawnand: remove misguided comment of nand_get_device()
  mtd: rawnand: orion: Use devm_clk_get_optional()
  mtd: rawnand: cafe: Use correct function name in comment block
  mtd: rawnand: atmel: Unmap streaming DMA mappings
  mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
  mtd: rawnand: arasan: stop using 0 as NULL pointer
  mtd: rawnand: gpmi: Fix typo 'the the' in comment
  mtd: rawnand: brcmnand: Add individual glue driver selection
  mtd: rawnand: brcmnand: Move Kconfig to driver folder
  ...

4 files changed, 146 insertions, 64 deletions

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5794ab1147c1..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..28fb9a7dd70f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-nfc
+      - amlogic,meson-axg-nfc
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nfc
+      - const: emmc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
index 30e0c66ab0eb..04f26196c4c1 100644
--- a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mtd/intel,lgm-nand.yaml#
+$id: http://devicetree.org/schemas/mtd/intel,lgm-ebunand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel LGM SoC NAND Controller Device Tree Bindings
@@ -14,7 +14,7 @@ maintainers:
 
 properties:
   compatible:
-    const: intel,lgm-nand
+    const: intel,lgm-ebunand
 
   reg:
     maxItems: 6
@@ -51,7 +51,7 @@ patternProperties:
     properties:
       reg:
         minimum: 0
-        maximum: 7
+        maximum: 1
 
       nand-ecc-mode: true
 
@@ -75,7 +75,7 @@ additionalProperties: false
 examples:
   - |
     nand-controller@e0f00000 {
-      compatible = "intel,lgm-nand";
+      compatible = "intel,lgm-ebunand";
       reg = <0xe0f00000 0x100>,
             <0xe1000000 0x300>,
             <0xe1400000 0x8000>,
diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
new file mode 100644
index 000000000000..8a88e7d16524
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/u-boot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot bootloader partition
+
+description: |
+  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  located on some kind of flash device.
+
+  Device configuration is stored as a set of environment variables that are
+  located in a (usually standalone) block of data.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,u-boot
+        description: |
+          Broadcom stores environment variables inside a U-Boot partition. They
+          can be identified by a custom header with magic value.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "brcm,u-boot";
+            reg = <0x0 0x100000>;
+            label = "u-boot";
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "firmware";
+        };
+    };