Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

3 files changed, 159 insertions, 55 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index 3c3e51af154b..11fd68a70dca 100644
--- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Synopsys DesignWare MIPI DSI host controller
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
   This document defines device tree properties for the Synopsys DesignWare MIPI
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
deleted file mode 100644
index 583c5e9dbe6b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Toshiba TC358767 eDP bridge bindings
-
-Required properties:
- - compatible: "toshiba,tc358767"
- - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
- - clock-names: should be "ref"
- - clocks: OF device-tree clock specification for refclk input. The reference
-   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
-
-Optional properties:
- - shutdown-gpios: OF device-tree gpio specification for SD pin
-                   (active high shutdown input)
- - reset-gpios: OF device-tree gpio specification for RSTX pin
-                (active low system reset)
- - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
- - ports: the ports node can contain video interface port nodes to connect
-   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
-    - port@0: DSI input port
-    - port@1: DPI input port
-    - port@2: eDP/DP output port
-
-[1]: Documentation/devicetree/bindings/graph.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		reg = <0x68>;
-		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 000000000000..f1541cc05297
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767 eDP bridge bindings
+
+maintainers:
+  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+
+properties:
+  compatible:
+    const: toshiba,tc358767
+
+  reg:
+    enum:
+      - 0x68
+      - 0x0f
+    description: |
+        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+  clock-names:
+    const: "ref"
+
+  clocks:
+    maxItems: 1
+    description: |
+        OF device-tree clock specification for refclk input. The reference.
+        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for SD pin(active high shutdown input)
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for RSTX pin(active low system reset)
+
+  toshiba,hpd-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DSI input port. The remote endpoint phandle should be a
+            reference to a valid DSI output endpoint node
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DPI input port. The remote endpoint phandle should be a
+            reference to a valid DPI output endpoint node
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            eDP/DP output port. The remote endpoint phandle should be a
+            reference to a valid eDP panel input endpoint node. This port is
+            optional, treated as DP panel if not defined
+
+    oneOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* DPI input and eDP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_0: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    /* DPI input and DP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_1: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+            };
+        };
+    };