diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt')
-rw-r--r-- | Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt | 54 |
1 files changed, 0 insertions, 54 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt deleted file mode 100644 index 583c5e9dbe6b..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt +++ /dev/null @@ -1,54 +0,0 @@ -Toshiba TC358767 eDP bridge bindings - -Required properties: - - compatible: "toshiba,tc358767" - - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins - - clock-names: should be "ref" - - clocks: OF device-tree clock specification for refclk input. The reference - clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. - -Optional properties: - - shutdown-gpios: OF device-tree gpio specification for SD pin - (active high shutdown input) - - reset-gpios: OF device-tree gpio specification for RSTX pin - (active low system reset) - - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) - - ports: the ports node can contain video interface port nodes to connect - to a DPI/DSI source and to an eDP/DP sink according to [1][2]: - - port@0: DSI input port - - port@1: DPI input port - - port@2: eDP/DP output port - -[1]: Documentation/devicetree/bindings/graph.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - edp-bridge@68 { - compatible = "toshiba,tc358767"; - reg = <0x68>; - shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - clock-names = "ref"; - clocks = <&edp_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - bridge_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@2 { - reg = <2>; - - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; |