diff options
| author | Olga Kitaina <okitain@gmail.com> | 2022-06-28 21:18:24 +0530 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2022-06-29 13:38:08 +0200 |
| commit | e16eceea863b417fd328588b1be1a79de0bc937f (patch) | |
| tree | 3f5daf164c4ea3e3dc7e54158159b38a887a4cf5 | |
| parent | 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 (diff) | |
| download | linux-e16eceea863b417fd328588b1be1a79de0bc937f.tar.bz2 | |
mtd: rawnand: arasan: Fix clock rate in NV-DDR
According to the Arasan NAND controller spec, the flash clock rate for SDR
must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
which would result in incorrect behavior for NV-DDR modes 0-4.
The appropriate clock rate can be calculated from the NV-DDR timing
parameters as 1/tCK, or for rates measured in picoseconds,
10^12 / nand_nvddr_timings->tCK_min.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Olga Kitaina <okitain@gmail.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com
| -rw-r--r-- | drivers/mtd/nand/raw/arasan-nand-controller.c | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c index c5264fa223c4..296fb16c8dc3 100644 --- a/drivers/mtd/nand/raw/arasan-nand-controller.c +++ b/drivers/mtd/nand/raw/arasan-nand-controller.c @@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct nand_chip *chip, int target, DQS_BUFF_SEL_OUT(dqs_mode); } - anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK; + if (nand_interface_is_sdr(conf)) { + anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK; + } else { + /* ONFI timings are defined in picoseconds */ + anand->clk = div_u64((u64)NSEC_PER_SEC * 1000, + conf->timings.nvddr.tCK_min); + } /* * Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work |