diff options
| author | Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> | 2022-06-28 21:18:23 +0530 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2022-06-29 13:36:33 +0200 |
| commit | 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 (patch) | |
| tree | 310641e8f011af6e8346429381a926b614852604 | |
| parent | 431eae20a093fe3a47cf617b01b911ef39ce3a83 (diff) | |
| download | linux-7499bfeedb47efc1ee4dc793b92c610d46e6d6a6.tar.bz2 | |
mtd: rawnand: arasan: Update NAND bus clock instead of system clock
In current implementation the Arasan NAND driver is updating the
system clock(i.e., anand->clk) in accordance to the timing modes
(i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the
flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be
updated instead. This patch keeps the system clock unchanged and updates
the NAND bus clock as per the timing modes.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-2-amit.kumar-mahapatra@xilinx.com
| -rw-r--r-- | drivers/mtd/nand/raw/arasan-nand-controller.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c index 53bd10738418..c5264fa223c4 100644 --- a/drivers/mtd/nand/raw/arasan-nand-controller.c +++ b/drivers/mtd/nand/raw/arasan-nand-controller.c @@ -347,17 +347,17 @@ static int anfc_select_target(struct nand_chip *chip, int target) /* Update clock frequency */ if (nfc->cur_clk != anand->clk) { - clk_disable_unprepare(nfc->controller_clk); - ret = clk_set_rate(nfc->controller_clk, anand->clk); + clk_disable_unprepare(nfc->bus_clk); + ret = clk_set_rate(nfc->bus_clk, anand->clk); if (ret) { dev_err(nfc->dev, "Failed to change clock rate\n"); return ret; } - ret = clk_prepare_enable(nfc->controller_clk); + ret = clk_prepare_enable(nfc->bus_clk); if (ret) { dev_err(nfc->dev, - "Failed to re-enable the controller clock\n"); + "Failed to re-enable the bus clock\n"); return ret; } |