diff options
| author | Paul Burton <paul.burton@imgtec.com> | 2017-06-02 12:29:59 -0700 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2017-06-28 12:22:42 +0200 |
| commit | d3f616346def161cfb0e4153692713f066755639 (patch) | |
| tree | 10d320e67623c6ffef7f6ea57c4179c91f93f04f | |
| parent | fbdc674ba33c3791b315a546019e570e3e94e599 (diff) | |
| download | linux-d3f616346def161cfb0e4153692713f066755639.tar.bz2 | |
MIPS: SEAD-3: Fix GIC interrupt specifiers
The various interrupt specifiers in the device tree are not in a valid
format for the MIPS GIC interrupt controller binding. Where each
interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the
pin number & the type of interrupt - the device tree was only providing
the pin number. This causes interrupts for those devices to not be used
when a GIC is present. SEAD-3 systems without a GIC are unaffected since
the DT fixup code generates interrupt specifiers that are valid for the
CPU interrupt controller.
Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each
interrupt specifier.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c11e3b48dbc3 ("MIPS: SEAD3: Probe UARTs using DT")
Fixes: a34e93882de4 ("MIPS: SEAD3: Probe ethernet controller using DT")
Fixes: 7afd2a5aec2e ("MIPS: SEAD3: Probe EHCI controller using DT")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.9+
Patchwork: https://patchwork.linux-mips.org/patch/16189/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| -rw-r--r-- | arch/mips/boot/dts/mti/sead3.dts | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts index cabe256f9a68..4f8bc83c2960 100644 --- a/arch/mips/boot/dts/mti/sead3.dts +++ b/arch/mips/boot/dts/mti/sead3.dts @@ -60,7 +60,7 @@ reg = <0x1b200000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0>; /* GIC 0 or CPU 6 */ + interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ has-transaction-translator; }; @@ -223,7 +223,7 @@ clock-frequency = <14745600>; interrupt-parent = <&gic>; - interrupts = <3>; /* GIC 3 or CPU 4 */ + interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */ no-loopback-test; }; @@ -238,7 +238,7 @@ clock-frequency = <14745600>; interrupt-parent = <&gic>; - interrupts = <2>; /* GIC 2 or CPU 4 */ + interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */ no-loopback-test; }; @@ -249,7 +249,7 @@ reg-io-width = <4>; interrupt-parent = <&gic>; - interrupts = <0>; /* GIC 0 or CPU 6 */ + interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ phy-mode = "mii"; smsc,irq-push-pull; |