1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Arun R Murthy <arun.murthy@stericsson.com>
*/
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/pwm.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/module.h>
/*
* PWM Out generators
* Bank: 0x10
*/
#define AB8500_PWM_OUT_CTRL1_REG 0x60
#define AB8500_PWM_OUT_CTRL2_REG 0x61
#define AB8500_PWM_OUT_CTRL7_REG 0x66
struct ab8500_pwm_chip {
struct pwm_chip chip;
unsigned int hwid;
};
static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
{
return container_of(chip, struct ab8500_pwm_chip, chip);
}
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
int ret;
u8 reg;
unsigned int higher_val, lower_val;
struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
if (!state->enabled) {
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
1 << ab8500->hwid, 0);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
pwm->label, ret);
return ret;
}
/*
* get the first 8 bits that are be written to
* AB8500_PWM_OUT_CTRL1_REG[0:7]
*/
lower_val = state->duty_cycle & 0x00FF;
/*
* get bits [9:10] that are to be written to
* AB8500_PWM_OUT_CTRL2_REG[0:1]
*/
higher_val = ((state->duty_cycle & 0x0300) >> 8);
reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
reg, (u8)lower_val);
if (ret < 0)
return ret;
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
(reg + 1), (u8)higher_val);
if (ret < 0)
return ret;
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
1 << ab8500->hwid, 1 << ab8500->hwid);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
pwm->label, ret);
return ret;
}
static const struct pwm_ops ab8500_pwm_ops = {
.apply = ab8500_pwm_apply,
.owner = THIS_MODULE,
};
static int ab8500_pwm_probe(struct platform_device *pdev)
{
struct ab8500_pwm_chip *ab8500;
int err;
if (pdev->id < 1 || pdev->id > 31)
return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
/*
* Nothing to be done in probe, this is required to get the
* device which is required for ab8500 read and write
*/
ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
if (ab8500 == NULL)
return -ENOMEM;
ab8500->chip.dev = &pdev->dev;
ab8500->chip.ops = &ab8500_pwm_ops;
ab8500->chip.npwm = 1;
ab8500->hwid = pdev->id - 1;
err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
if (err < 0)
return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
dev_dbg(&pdev->dev, "pwm probe successful\n");
return 0;
}
static struct platform_driver ab8500_pwm_driver = {
.driver = {
.name = "ab8500-pwm",
},
.probe = ab8500_pwm_probe,
};
module_platform_driver(ab8500_pwm_driver);
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
MODULE_ALIAS("platform:ab8500-pwm");
MODULE_LICENSE("GPL v2");
|
