summaryrefslogtreecommitdiffstats
path: root/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
blob: 4f3076bb3d7162e48f8d7ef600bf6d07f42812da (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
/*
 * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef UFS_QCOM_PHY_QMP_20NM_H_
#define UFS_QCOM_PHY_QMP_20NM_H_

#include "phy-qcom-ufs-i.h"

/* QCOM UFS PHY control registers */

#define COM_OFF(x)     (0x000 + x)
#define PHY_OFF(x)     (0xC00 + x)
#define TX_OFF(n, x)   (0x400 + (0x400 * n) + x)
#define RX_OFF(n, x)   (0x600 + (0x400 * n) + x)

/* UFS PHY PLL block registers */
#define QSERDES_COM_SYS_CLK_CTRL		COM_OFF(0x0)
#define QSERDES_COM_PLL_VCOTAIL_EN		COM_OFF(0x04)
#define QSERDES_COM_PLL_CNTRL			COM_OFF(0x14)
#define QSERDES_COM_PLL_IP_SETI			COM_OFF(0x24)
#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL	COM_OFF(0x28)
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		COM_OFF(0x30)
#define QSERDES_COM_PLL_CP_SETI			COM_OFF(0x34)
#define QSERDES_COM_PLL_IP_SETP			COM_OFF(0x38)
#define QSERDES_COM_PLL_CP_SETP			COM_OFF(0x3C)
#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND	COM_OFF(0x48)
#define QSERDES_COM_RESETSM_CNTRL		COM_OFF(0x4C)
#define QSERDES_COM_RESETSM_CNTRL2		COM_OFF(0x50)
#define QSERDES_COM_PLLLOCK_CMP1		COM_OFF(0x90)
#define QSERDES_COM_PLLLOCK_CMP2		COM_OFF(0x94)
#define QSERDES_COM_PLLLOCK_CMP3		COM_OFF(0x98)
#define QSERDES_COM_PLLLOCK_CMP_EN		COM_OFF(0x9C)
#define QSERDES_COM_BGTC			COM_OFF(0xA0)
#define QSERDES_COM_DEC_START1			COM_OFF(0xAC)
#define QSERDES_COM_PLL_AMP_OS			COM_OFF(0xB0)
#define QSERDES_COM_RES_CODE_UP_OFFSET		COM_OFF(0xD8)
#define QSERDES_COM_RES_CODE_DN_OFFSET		COM_OFF(0xDC)
#define QSERDES_COM_DIV_FRAC_START1		COM_OFF(0x100)
#define QSERDES_COM_DIV_FRAC_START2		COM_OFF(0x104)
#define QSERDES_COM_DIV_FRAC_START3		COM_OFF(0x108)
#define QSERDES_COM_DEC_START2			COM_OFF(0x10C)
#define QSERDES_COM_PLL_RXTXEPCLK_EN		COM_OFF(0x110)
#define QSERDES_COM_PLL_CRCTRL			COM_OFF(0x114)
#define QSERDES_COM_PLL_CLKEPDIV		COM_OFF(0x118)

/* TX LANE n (0, 1) registers */
#define QSERDES_TX_EMP_POST1_LVL(n)		TX_OFF(n, 0x08)
#define QSERDES_TX_DRV_LVL(n)			TX_OFF(n, 0x0C)
#define QSERDES_TX_LANE_MODE(n)			TX_OFF(n, 0x54)

/* RX LANE n (0, 1) registers */
#define QSERDES_RX_CDR_CONTROL1(n)		RX_OFF(n, 0x0)
#define QSERDES_RX_CDR_CONTROL_HALF(n)		RX_OFF(n, 0x8)
#define QSERDES_RX_RX_EQ_GAIN1_LSB(n)		RX_OFF(n, 0xA8)
#define QSERDES_RX_RX_EQ_GAIN1_MSB(n)		RX_OFF(n, 0xAC)
#define QSERDES_RX_RX_EQ_GAIN2_LSB(n)		RX_OFF(n, 0xB0)
#define QSERDES_RX_RX_EQ_GAIN2_MSB(n)		RX_OFF(n, 0xB4)
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n)	RX_OFF(n, 0xBC)
#define QSERDES_RX_CDR_CONTROL_QUARTER(n)	RX_OFF(n, 0xC)
#define QSERDES_RX_SIGDET_CNTRL(n)		RX_OFF(n, 0x100)

/* UFS PHY registers */
#define UFS_PHY_PHY_START			PHY_OFF(0x00)
#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x4)
#define UFS_PHY_TX_LANE_ENABLE			PHY_OFF(0x44)
#define UFS_PHY_PWM_G1_CLK_DIVIDER		PHY_OFF(0x08)
#define UFS_PHY_PWM_G2_CLK_DIVIDER		PHY_OFF(0x0C)
#define UFS_PHY_PWM_G3_CLK_DIVIDER		PHY_OFF(0x10)
#define UFS_PHY_PWM_G4_CLK_DIVIDER		PHY_OFF(0x14)
#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER	PHY_OFF(0x34)
#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER	PHY_OFF(0x38)
#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER	PHY_OFF(0x3C)
#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER	PHY_OFF(0x40)
#define UFS_PHY_OMC_STATUS_RDVAL		PHY_OFF(0x68)
#define UFS_PHY_LINE_RESET_TIME			PHY_OFF(0x28)
#define UFS_PHY_LINE_RESET_GRANULARITY		PHY_OFF(0x2C)
#define UFS_PHY_TSYNC_RSYNC_CNTL		PHY_OFF(0x48)
#define UFS_PHY_PLL_CNTL			PHY_OFF(0x50)
#define UFS_PHY_TX_LARGE_AMP_DRV_LVL		PHY_OFF(0x54)
#define UFS_PHY_TX_SMALL_AMP_DRV_LVL		PHY_OFF(0x5C)
#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL	PHY_OFF(0x58)
#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL	PHY_OFF(0x60)
#define UFS_PHY_CFG_CHANGE_CNT_VAL		PHY_OFF(0x64)
#define UFS_PHY_RX_SYNC_WAIT_TIME		PHY_OFF(0x6C)
#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xB4)
#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xE0)
#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xB8)
#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xE4)
#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY	PHY_OFF(0xBC)
#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY	PHY_OFF(0xE8)
#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY	PHY_OFF(0xFC)
#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY		PHY_OFF(0x100)
#define UFS_PHY_RX_SIGDET_CTRL3				PHY_OFF(0x14c)
#define UFS_PHY_RMMI_ATTR_CTRL			PHY_OFF(0x160)
#define UFS_PHY_RMMI_RX_CFGUPDT_L1	(1 << 7)
#define UFS_PHY_RMMI_TX_CFGUPDT_L1	(1 << 6)
#define UFS_PHY_RMMI_CFGWR_L1		(1 << 5)
#define UFS_PHY_RMMI_CFGRD_L1		(1 << 4)
#define UFS_PHY_RMMI_RX_CFGUPDT_L0	(1 << 3)
#define UFS_PHY_RMMI_TX_CFGUPDT_L0	(1 << 2)
#define UFS_PHY_RMMI_CFGWR_L0		(1 << 1)
#define UFS_PHY_RMMI_CFGRD_L0		(1 << 0)
#define UFS_PHY_RMMI_ATTRID			PHY_OFF(0x164)
#define UFS_PHY_RMMI_ATTRWRVAL			PHY_OFF(0x168)
#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS	PHY_OFF(0x16C)
#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS	PHY_OFF(0x170)
#define UFS_PHY_PCS_READY_STATUS		PHY_OFF(0x174)

#define UFS_PHY_TX_LANE_ENABLE_MASK		0x3

/*
 * This structure represents the 20nm specific phy.
 * common_cfg MUST remain the first field in this structure
 * in case extra fields are added. This way, when calling
 * get_ufs_qcom_phy() of generic phy, we can extract the
 * common phy structure (struct ufs_qcom_phy) out of it
 * regardless of the relevant specific phy.
 */
struct ufs_qcom_phy_qmp_20nm {
	struct ufs_qcom_phy common_cfg;
};

static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
};

static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
};

static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
};

#endif