1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Broadcom Northstar USB 2.0 PHY Driver
*
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
*/
#include <linux/bcma/bcma.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
struct bcm_ns_usb2 {
struct device *dev;
struct clk *ref_clk;
struct phy *phy;
void __iomem *dmu;
};
static int bcm_ns_usb2_phy_init(struct phy *phy)
{
struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
struct device *dev = usb2->dev;
void __iomem *dmu = usb2->dmu;
u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
int err = 0;
err = clk_prepare_enable(usb2->ref_clk);
if (err < 0) {
dev_err(dev, "Failed to prepare ref clock: %d\n", err);
goto err_out;
}
ref_clk_rate = clk_get_rate(usb2->ref_clk);
if (!ref_clk_rate) {
dev_err(dev, "Failed to get ref clock rate\n");
err = -EINVAL;
goto err_clk_off;
}
usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
usb_pll_pdiv = usb2ctl;
usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
} else {
usb_pll_pdiv = 1 << 3;
}
/* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
/* Unlock DMU PLL settings with some magic value */
writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
/* Write USB 2.0 PLL control setting */
usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
/* Lock DMU PLL settings */
writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
err_clk_off:
clk_disable_unprepare(usb2->ref_clk);
err_out:
return err;
}
static const struct phy_ops ops = {
.init = bcm_ns_usb2_phy_init,
.owner = THIS_MODULE,
};
static int bcm_ns_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct bcm_ns_usb2 *usb2;
struct resource *res;
struct phy_provider *phy_provider;
usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
if (!usb2)
return -ENOMEM;
usb2->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
usb2->dmu = devm_ioremap_resource(dev, res);
if (IS_ERR(usb2->dmu)) {
dev_err(dev, "Failed to map DMU regs\n");
return PTR_ERR(usb2->dmu);
}
usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
if (IS_ERR(usb2->ref_clk)) {
dev_err(dev, "Clock not defined\n");
return PTR_ERR(usb2->ref_clk);
}
usb2->phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(usb2->phy))
return PTR_ERR(usb2->phy);
phy_set_drvdata(usb2->phy, usb2);
platform_set_drvdata(pdev, usb2);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id bcm_ns_usb2_id_table[] = {
{ .compatible = "brcm,ns-usb2-phy", },
{},
};
MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
static struct platform_driver bcm_ns_usb2_driver = {
.probe = bcm_ns_usb2_probe,
.driver = {
.name = "bcm_ns_usb2",
.of_match_table = bcm_ns_usb2_id_table,
},
};
module_platform_driver(bcm_ns_usb2_driver);
MODULE_LICENSE("GPL v2");
|
