summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcs/pcs-xpcs-nxp.c
blob: 984c9f7f16a83bb0733defb4b634d931dcae61bf (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
// SPDX-License-Identifier: GPL-2.0
/* Copyright 2021 NXP Semiconductors
 */
#include <linux/pcs/pcs-xpcs.h>
#include "pcs-xpcs.h"

/* LANE_DRIVER1_0 register */
#define SJA1110_LANE_DRIVER1_0		0x8038
#define SJA1110_TXDRV(x)		(((x) << 12) & GENMASK(14, 12))

/* LANE_DRIVER2_0 register */
#define SJA1110_LANE_DRIVER2_0		0x803a
#define SJA1110_TXDRVTRIM_LSB(x)	((x) & GENMASK_ULL(15, 0))

/* LANE_DRIVER2_1 register */
#define SJA1110_LANE_DRIVER2_1		0x803b
#define SJA1110_LANE_DRIVER2_1_RSV	BIT(9)
#define SJA1110_TXDRVTRIM_MSB(x)	(((x) & GENMASK_ULL(23, 16)) >> 16)

/* LANE_TRIM register */
#define SJA1110_LANE_TRIM		0x8040
#define SJA1110_TXTEN			BIT(11)
#define SJA1110_TXRTRIM(x)		(((x) << 8) & GENMASK(10, 8))
#define SJA1110_TXPLL_BWSEL		BIT(7)
#define SJA1110_RXTEN			BIT(6)
#define SJA1110_RXRTRIM(x)		(((x) << 3) & GENMASK(5, 3))
#define SJA1110_CDR_GAIN		BIT(2)
#define SJA1110_ACCOUPLE_RXVCM_EN	BIT(0)

/* LANE_DATAPATH_1 register */
#define SJA1110_LANE_DATAPATH_1		0x8037

/* POWERDOWN_ENABLE register */
#define SJA1110_POWERDOWN_ENABLE	0x8041
#define SJA1110_TXPLL_PD		BIT(12)
#define SJA1110_TXPD			BIT(11)
#define SJA1110_RXPKDETEN		BIT(10)
#define SJA1110_RXCH_PD			BIT(9)
#define SJA1110_RXBIAS_PD		BIT(8)
#define SJA1110_RESET_SER_EN		BIT(7)
#define SJA1110_RESET_SER		BIT(6)
#define SJA1110_RESET_DES		BIT(5)
#define SJA1110_RCVEN			BIT(4)

/* RXPLL_CTRL0 register */
#define SJA1110_RXPLL_CTRL0		0x8065
#define SJA1110_RXPLL_FBDIV(x)		(((x) << 2) & GENMASK(9, 2))

/* RXPLL_CTRL1 register */
#define SJA1110_RXPLL_CTRL1		0x8066
#define SJA1110_RXPLL_REFDIV(x)		((x) & GENMASK(4, 0))

/* TXPLL_CTRL0 register */
#define SJA1110_TXPLL_CTRL0		0x806d
#define SJA1110_TXPLL_FBDIV(x)		((x) & GENMASK(11, 0))

/* TXPLL_CTRL1 register */
#define SJA1110_TXPLL_CTRL1		0x806e
#define SJA1110_TXPLL_REFDIV(x)		((x) & GENMASK(5, 0))

/* RX_DATA_DETECT register */
#define SJA1110_RX_DATA_DETECT		0x8045

/* RX_CDR_CTLE register */
#define SJA1110_RX_CDR_CTLE		0x8042

/* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane
 * polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain
 * normal non-inverted behavior, the TX lane polarity must be inverted in the
 * PCS, via the DIGITAL_CONTROL_2 register.
 */
int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs)
{
	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL2,
			  DW_VR_MII_DIG_CTRL2_TX_POL_INV);
}

static int nxp_sja1110_pma_config(struct dw_xpcs *xpcs,
				  u16 txpll_fbdiv, u16 txpll_refdiv,
				  u16 rxpll_fbdiv, u16 rxpll_refdiv,
				  u16 rx_cdr_ctle)
{
	u16 val;
	int ret;

	/* Program TX PLL feedback divider and reference divider settings for
	 * correct oscillation frequency.
	 */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL0,
			 SJA1110_TXPLL_FBDIV(txpll_fbdiv));
	if (ret < 0)
		return ret;

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL1,
			 SJA1110_TXPLL_REFDIV(txpll_refdiv));
	if (ret < 0)
		return ret;

	/* Program transmitter amplitude and disable amplitude trimming */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER1_0,
			 SJA1110_TXDRV(0x5));
	if (ret < 0)
		return ret;

	val = SJA1110_TXDRVTRIM_LSB(0xffffffull);

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_0, val);
	if (ret < 0)
		return ret;

	val = SJA1110_TXDRVTRIM_MSB(0xffffffull) | SJA1110_LANE_DRIVER2_1_RSV;

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_1, val);
	if (ret < 0)
		return ret;

	/* Enable input and output resistor terminations for low BER. */
	val = SJA1110_ACCOUPLE_RXVCM_EN | SJA1110_CDR_GAIN |
	      SJA1110_RXRTRIM(4) | SJA1110_RXTEN | SJA1110_TXPLL_BWSEL |
	      SJA1110_TXRTRIM(3) | SJA1110_TXTEN;

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_TRIM, val);
	if (ret < 0)
		return ret;

	/* Select PCS as transmitter data source. */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DATAPATH_1, 0);
	if (ret < 0)
		return ret;

	/* Program RX PLL feedback divider and reference divider for correct
	 * oscillation frequency.
	 */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL0,
			 SJA1110_RXPLL_FBDIV(rxpll_fbdiv));
	if (ret < 0)
		return ret;

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL1,
			 SJA1110_RXPLL_REFDIV(rxpll_refdiv));
	if (ret < 0)
		return ret;

	/* Program threshold for receiver signal detector.
	 * Enable control of RXPLL by receiver signal detector to disable RXPLL
	 * when an input signal is not present.
	 */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_DATA_DETECT, 0x0005);
	if (ret < 0)
		return ret;

	/* Enable TX and RX PLLs and circuits.
	 * Release reset of PMA to enable data flow to/from PCS.
	 */
	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE);
	if (ret < 0)
		return ret;

	val = ret & ~(SJA1110_TXPLL_PD | SJA1110_TXPD | SJA1110_RXCH_PD |
		      SJA1110_RXBIAS_PD | SJA1110_RESET_SER_EN |
		      SJA1110_RESET_SER | SJA1110_RESET_DES);
	val |= SJA1110_RXPKDETEN | SJA1110_RCVEN;

	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE, val);
	if (ret < 0)
		return ret;

	/* Program continuous-time linear equalizer (CTLE) settings. */
	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_CDR_CTLE,
			 rx_cdr_ctle);
	if (ret < 0)
		return ret;

	return 0;
}

int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs)
{
	return nxp_sja1110_pma_config(xpcs, 0x19, 0x1, 0x19, 0x1, 0x212a);
}

int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs)
{
	return nxp_sja1110_pma_config(xpcs, 0x7d, 0x2, 0x7d, 0x2, 0x732a);
}