summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/dvb-usb-v2/af9035.h
blob: 1533cf346ef71117a0017ff9c46c339db05baafd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Afatech AF9035 DVB USB driver
 *
 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
 */

#ifndef AF9035_H
#define AF9035_H

#include <linux/platform_device.h>
#include "dvb_usb.h"
#include "af9033.h"
#include "tua9001.h"
#include "fc0011.h"
#include "fc0012.h"
#include "mxl5007t.h"
#include "tda18218.h"
#include "fc2580.h"
#include "it913x.h"
#include "si2168.h"
#include "si2157.h"

struct reg_val {
	u32 reg;
	u8  val;
};

struct reg_val_mask {
	u32 reg;
	u8  val;
	u8  mask;
};

struct usb_req {
	u8  cmd;
	u8  mbox;
	u8  wlen;
	u8  *wbuf;
	u8  rlen;
	u8  *rbuf;
};

struct state {
#define BUF_LEN 64
	u8 buf[BUF_LEN];
	u8 seq; /* packet sequence number */
	u8 prechip_version;
	u8 chip_version;
	u16 chip_type;
	u8 eeprom[256];
	bool no_eeprom;
	u8 ir_mode;
	u8 ir_type;
	u8 dual_mode:1;
	u8 no_read:1;
	u8 af9033_i2c_addr[2];
	u8 it930x_addresses;
	struct af9033_config af9033_config[2];
	struct af9033_ops ops;
	#define AF9035_I2C_CLIENT_MAX 4
	struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
	struct i2c_adapter *i2c_adapter_demod;
	struct platform_device *platform_device_tuner[2];
};

struct address_table {
	u8 frontend_i2c_addr;
	u8 tuner_i2c_addr;
	u8 tuner_if_port;
};

static const struct address_table it930x_addresses_table[] = {
	{ 0x67, 0x63, 1 },
	{ 0x64, 0x60, 0 },
};

static const u32 clock_lut_af9035[] = {
	20480000, /*      FPGA */
	16384000, /* 16.38 MHz */
	20480000, /* 20.48 MHz */
	36000000, /* 36.00 MHz */
	30000000, /* 30.00 MHz */
	26000000, /* 26.00 MHz */
	28000000, /* 28.00 MHz */
	32000000, /* 32.00 MHz */
	34000000, /* 34.00 MHz */
	24000000, /* 24.00 MHz */
	22000000, /* 22.00 MHz */
	12000000, /* 12.00 MHz */
};

static const u32 clock_lut_it9135[] = {
	12000000, /* 12.00 MHz */
	20480000, /* 20.48 MHz */
	36000000, /* 36.00 MHz */
	30000000, /* 30.00 MHz */
	26000000, /* 26.00 MHz */
	28000000, /* 28.00 MHz */
	32000000, /* 32.00 MHz */
	34000000, /* 34.00 MHz */
	24000000, /* 24.00 MHz */
	22000000, /* 22.00 MHz */
};

#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"

/*
 * eeprom is memory mapped as read only. Writing that memory mapped address
 * will not corrupt eeprom.
 *
 * TS mode:
 * 0  TS
 * 1  DCA + PIP
 * 3  PIP
 * 5  DCA + PIP (AF9035 only)
 * n  DCA
 *
 * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
 */

#define EEPROM_BASE_AF9035        0x42f5
#define EEPROM_BASE_IT9135        0x4994
#define EEPROM_SHIFT                0x10

#define EEPROM_IR_MODE              0x18
#define EEPROM_TS_MODE              0x31
#define EEPROM_2ND_DEMOD_ADDR       0x32
#define EEPROM_IR_TYPE              0x34
#define EEPROM_1_IF_L               0x38
#define EEPROM_1_IF_H               0x39
#define EEPROM_1_TUNER_ID           0x3c
#define EEPROM_2_IF_L               0x48
#define EEPROM_2_IF_H               0x49
#define EEPROM_2_TUNER_ID           0x4c

/* USB commands */
#define CMD_MEM_RD                  0x00
#define CMD_MEM_WR                  0x01
#define CMD_I2C_RD                  0x02
#define CMD_I2C_WR                  0x03
#define CMD_IR_GET                  0x18
#define CMD_FW_DL                   0x21
#define CMD_FW_QUERYINFO            0x22
#define CMD_FW_BOOT                 0x23
#define CMD_FW_DL_BEGIN             0x24
#define CMD_FW_DL_END               0x25
#define CMD_FW_SCATTER_WR           0x29
#define CMD_GENERIC_I2C_RD          0x2a
#define CMD_GENERIC_I2C_WR          0x2b

#endif