1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
*
* Copyright (C) 2010 Malcolm Priestley
*/
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <linux/slab.h>
#include <linux/types.h>
#include "ix2505v.h"
static int ix2505v_debug;
#define dprintk(level, args...) do { \
if (ix2505v_debug & level) \
printk(KERN_DEBUG "ix2505v: " args); \
} while (0)
#define deb_info(args...) dprintk(0x01, args)
#define deb_i2c(args...) dprintk(0x02, args)
struct ix2505v_state {
struct i2c_adapter *i2c;
const struct ix2505v_config *config;
u32 frequency;
};
/*
* Data read format of the Sharp IX2505V B0017
*
* byte1: 1 | 1 | 0 | 0 | 0 | MA1 | MA0 | 1
* byte2: POR | FL | RD2 | RD1 | RD0 | X | X | X
*
* byte1 = address
* byte2;
* POR = Power on Reset (VCC H=<2.2v L=>2.2v)
* FL = Phase Lock (H=lock L=unlock)
* RD0-2 = Reserved internal operations
*
* Only POR can be used to check the tuner is present
*
* Caution: after byte2 the I2C reverts to write mode continuing to read
* may corrupt tuning data.
*
*/
static int ix2505v_read_status_reg(struct ix2505v_state *state)
{
u8 addr = state->config->tuner_address;
u8 b2[] = {0};
int ret;
struct i2c_msg msg[1] = {
{ .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 }
};
ret = i2c_transfer(state->i2c, msg, 1);
deb_i2c("Read %s ", __func__);
return (ret == 1) ? (int) b2[0] : -1;
}
static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
{
struct i2c_msg msg[1] = {
{ .addr = state->config->tuner_address, .flags = 0,
.buf = buf, .len = count },
};
int ret;
ret = i2c_transfer(state->i2c, msg, 1);
if (ret != 1) {
deb_i2c("%s: i2c error, ret=%d\n", __func__, ret);
return -EIO;
}
return 0;
}
static void ix2505v_release(struct dvb_frontend *fe)
{
struct ix2505v_state *state = fe->tuner_priv;
fe->tuner_priv = NULL;
kfree(state);
}
/*
* Data write format of the Sharp IX2505V B0017
*
* byte1: 1 | 1 | 0 | 0 | 0 | 0(MA1)| 0(MA0)| 0
* byte2: 0 | BG1 | BG2 | N8 | N7 | N6 | N5 | N4
* byte3: N3 | N2 | N1 | A5 | A4 | A3 | A2 | A1
* byte4: 1 | 1(C1) | 1(C0) | PD5 | PD4 | TM | 0(RTS)| 1(REF)
* byte5: BA2 | BA1 | BA0 | PSC | PD3 |PD2/TS2|DIV/TS1|PD0/TS0
*
* byte1 = address
*
* Write order
* 1) byte1 -> byte2 -> byte3 -> byte4 -> byte5
* 2) byte1 -> byte4 -> byte5 -> byte2 -> byte3
* 3) byte1 -> byte2 -> byte3 -> byte4
* 4) byte1 -> byte4 -> byte5 -> byte2
* 5) byte1 -> byte2 -> byte3
* 6) byte1 -> byte4 -> byte5
* 7) byte1 -> byte2
* 8) byte1 -> byte4
*
* Recommended Setup
* 1 -> 8 -> 6
*/
static int ix2505v_set_params(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct ix2505v_state *state = fe->tuner_priv;
u32 frequency = c->frequency;
u32 b_w = (c->symbol_rate * 27) / 32000;
u32 div_factor, N , A, x;
int ret = 0, len;
u8 gain, cc, ref, psc, local_osc, lpf;
u8 data[4] = {0};
if ((frequency < fe->ops.info.frequency_min_hz / kHz)
|| (frequency > fe->ops.info.frequency_max_hz / kHz))
return -EINVAL;
if (state->config->tuner_gain)
gain = (state->config->tuner_gain < 4)
? state->config->tuner_gain : 0;
else
gain = 0x0;
if (state->config->tuner_chargepump)
cc = state->config->tuner_chargepump;
else
cc = 0x3;
ref = 8; /* REF =1 */
psc = 32; /* PSC = 0 */
div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */
x = div_factor / psc;
N = x/100;
A = ((x - (N * 100)) * psc) / 100;
data[0] = ((gain & 0x3) << 5) | (N >> 3);
data[1] = (N << 5) | (A & 0x1f);
data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/
deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A);
if (frequency <= 1065000)
local_osc = (6 << 5) | 2;
else if (frequency <= 1170000)
local_osc = (7 << 5) | 2;
else if (frequency <= 1300000)
local_osc = (1 << 5);
else if (frequency <= 1445000)
local_osc = (2 << 5);
else if (frequency <= 1607000)
local_osc = (3 << 5);
else if (frequency <= 1778000)
local_osc = (4 << 5);
else if (frequency <= 1942000)
local_osc = (5 << 5);
else /*frequency up to 2150000*/
local_osc = (6 << 5);
data[3] = local_osc; /* all other bits set 0 */
if (b_w <= 10000)
lpf = 0xc;
else if (b_w <= 12000)
lpf = 0x2;
else if (b_w <= 14000)
lpf = 0xa;
else if (b_w <= 16000)
lpf = 0x6;
else if (b_w <= 18000)
lpf = 0xe;
else if (b_w <= 20000)
lpf = 0x1;
else if (b_w <= 22000)
lpf = 0x9;
else if (b_w <= 24000)
lpf = 0x5;
else if (b_w <= 26000)
lpf = 0xd;
else if (b_w <= 28000)
lpf = 0x3;
else
lpf = 0xb;
deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf);
deb_info("Data 0=[%4phN]\n", data);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
len = sizeof(data);
ret |= ix2505v_write(state, data, len);
data[2] |= 0x4; /* set TM = 1 other bits same */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
len = 1;
ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */
msleep(10);
data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */
data[3] |= (lpf & 0x3) << 2;
deb_info("Data 2=[%x%x]\n", data[2], data[3]);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
len = 2;
ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */
if (state->config->min_delay_ms)
msleep(state->config->min_delay_ms);
state->frequency = frequency;
return ret;
}
static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct ix2505v_state *state = fe->tuner_priv;
*frequency = state->frequency;
return 0;
}
static const struct dvb_tuner_ops ix2505v_tuner_ops = {
.info = {
.name = "Sharp IX2505V (B0017)",
.frequency_min_hz = 950 * MHz,
.frequency_max_hz = 2175 * MHz
},
.release = ix2505v_release,
.set_params = ix2505v_set_params,
.get_frequency = ix2505v_get_frequency,
};
struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
const struct ix2505v_config *config,
struct i2c_adapter *i2c)
{
struct ix2505v_state *state = NULL;
int ret;
if (NULL == config) {
deb_i2c("%s: no config ", __func__);
goto error;
}
state = kzalloc(sizeof(struct ix2505v_state), GFP_KERNEL);
if (NULL == state)
return NULL;
state->config = config;
state->i2c = i2c;
if (state->config->tuner_write_only) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
ret = ix2505v_read_status_reg(state);
if (ret & 0x80) {
deb_i2c("%s: No IX2505V found\n", __func__);
goto error;
}
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
fe->tuner_priv = state;
memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops,
sizeof(struct dvb_tuner_ops));
deb_i2c("%s: initialization (%s addr=0x%02x) ok\n",
__func__, fe->ops.tuner_ops.info.name, config->tuner_address);
return fe;
error:
kfree(state);
return NULL;
}
EXPORT_SYMBOL(ix2505v_attach);
module_param_named(debug, ix2505v_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("DVB IX2505V tuner driver");
MODULE_AUTHOR("Malcolm Priestley");
MODULE_LICENSE("GPL");
|
