1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
|
/**
* IIO driver for the MiraMEMS DA311 3-axis accelerometer
*
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
* Copyright (c) 2011-2013 MiraMEMS Sensing Technology Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/byteorder/generic.h>
#define DA311_CHIP_ID 0x13
/*
* Note register addressed go from 0 - 0x3f and then wrap.
* For some reason there are 2 banks with 0 - 0x3f addresses,
* rather then a single 0-0x7f bank.
*/
/* Bank 0 regs */
#define DA311_REG_BANK 0x0000
#define DA311_REG_LDO_REG 0x0006
#define DA311_REG_CHIP_ID 0x000f
#define DA311_REG_TEMP_CFG_REG 0x001f
#define DA311_REG_CTRL_REG1 0x0020
#define DA311_REG_CTRL_REG3 0x0022
#define DA311_REG_CTRL_REG4 0x0023
#define DA311_REG_CTRL_REG5 0x0024
#define DA311_REG_CTRL_REG6 0x0025
#define DA311_REG_STATUS_REG 0x0027
#define DA311_REG_OUT_X_L 0x0028
#define DA311_REG_OUT_X_H 0x0029
#define DA311_REG_OUT_Y_L 0x002a
#define DA311_REG_OUT_Y_H 0x002b
#define DA311_REG_OUT_Z_L 0x002c
#define DA311_REG_OUT_Z_H 0x002d
#define DA311_REG_INT1_CFG 0x0030
#define DA311_REG_INT1_SRC 0x0031
#define DA311_REG_INT1_THS 0x0032
#define DA311_REG_INT1_DURATION 0x0033
#define DA311_REG_INT2_CFG 0x0034
#define DA311_REG_INT2_SRC 0x0035
#define DA311_REG_INT2_THS 0x0036
#define DA311_REG_INT2_DURATION 0x0037
#define DA311_REG_CLICK_CFG 0x0038
#define DA311_REG_CLICK_SRC 0x0039
#define DA311_REG_CLICK_THS 0x003a
#define DA311_REG_TIME_LIMIT 0x003b
#define DA311_REG_TIME_LATENCY 0x003c
#define DA311_REG_TIME_WINDOW 0x003d
/* Bank 1 regs */
#define DA311_REG_SOFT_RESET 0x0105
#define DA311_REG_OTP_XOFF_L 0x0110
#define DA311_REG_OTP_XOFF_H 0x0111
#define DA311_REG_OTP_YOFF_L 0x0112
#define DA311_REG_OTP_YOFF_H 0x0113
#define DA311_REG_OTP_ZOFF_L 0x0114
#define DA311_REG_OTP_ZOFF_H 0x0115
#define DA311_REG_OTP_XSO 0x0116
#define DA311_REG_OTP_YSO 0x0117
#define DA311_REG_OTP_ZSO 0x0118
#define DA311_REG_OTP_TRIM_OSC 0x011b
#define DA311_REG_LPF_ABSOLUTE 0x011c
#define DA311_REG_TEMP_OFF1 0x0127
#define DA311_REG_TEMP_OFF2 0x0128
#define DA311_REG_TEMP_OFF3 0x0129
#define DA311_REG_OTP_TRIM_THERM_H 0x011a
/*
* a value of + or -1024 corresponds to + or - 1G
* scale = 9.81 / 1024 = 0.009580078
*/
static const int da311_nscale = 9580078;
#define DA311_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec da311_channels[] = {
/* | 0x80 comes from the android driver */
DA311_CHANNEL(DA311_REG_OUT_X_L | 0x80, X),
DA311_CHANNEL(DA311_REG_OUT_Y_L | 0x80, Y),
DA311_CHANNEL(DA311_REG_OUT_Z_L | 0x80, Z),
};
struct da311_data {
struct i2c_client *client;
};
static int da311_register_mask_write(struct i2c_client *client, u16 addr,
u8 mask, u8 data)
{
int ret;
u8 tmp_data = 0;
if (addr & 0xff00) {
/* Select bank 1 */
ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x01);
if (ret < 0)
return ret;
}
if (mask != 0xff) {
ret = i2c_smbus_read_byte_data(client, addr);
if (ret < 0)
return ret;
tmp_data = ret;
}
tmp_data &= ~mask;
tmp_data |= data & mask;
ret = i2c_smbus_write_byte_data(client, addr & 0xff, tmp_data);
if (ret < 0)
return ret;
if (addr & 0xff00) {
/* Back to bank 0 */
ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x00);
if (ret < 0)
return ret;
}
return 0;
}
/* Init sequence taken from the android driver */
static int da311_reset(struct i2c_client *client)
{
static const struct {
u16 addr;
u8 mask;
u8 data;
} init_data[] = {
{ DA311_REG_TEMP_CFG_REG, 0xff, 0x08 },
{ DA311_REG_CTRL_REG5, 0xff, 0x80 },
{ DA311_REG_CTRL_REG4, 0x30, 0x00 },
{ DA311_REG_CTRL_REG1, 0xff, 0x6f },
{ DA311_REG_TEMP_CFG_REG, 0xff, 0x88 },
{ DA311_REG_LDO_REG, 0xff, 0x02 },
{ DA311_REG_OTP_TRIM_OSC, 0xff, 0x27 },
{ DA311_REG_LPF_ABSOLUTE, 0xff, 0x30 },
{ DA311_REG_TEMP_OFF1, 0xff, 0x3f },
{ DA311_REG_TEMP_OFF2, 0xff, 0xff },
{ DA311_REG_TEMP_OFF3, 0xff, 0x0f },
};
int i, ret;
/* Reset */
ret = da311_register_mask_write(client, DA311_REG_SOFT_RESET,
0xff, 0xaa);
if (ret < 0)
return ret;
for (i = 0; i < ARRAY_SIZE(init_data); i++) {
ret = da311_register_mask_write(client,
init_data[i].addr,
init_data[i].mask,
init_data[i].data);
if (ret < 0)
return ret;
}
return 0;
}
static int da311_enable(struct i2c_client *client, bool enable)
{
u8 data = enable ? 0x00 : 0x20;
return da311_register_mask_write(client, DA311_REG_TEMP_CFG_REG,
0x20, data);
}
static int da311_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct da311_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_smbus_read_word_data(data->client, chan->address);
if (ret < 0)
return ret;
/*
* Values are 12 bits, stored as 16 bits with the 4
* least significant bits always 0.
*/
*val = (short)ret >> 4;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = da311_nscale;
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static const struct iio_info da311_info = {
.read_raw = da311_read_raw,
};
static int da311_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct iio_dev *indio_dev;
struct da311_data *data;
ret = i2c_smbus_read_byte_data(client, DA311_REG_CHIP_ID);
if (ret != DA311_CHIP_ID)
return (ret < 0) ? ret : -ENODEV;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &da311_info;
indio_dev->name = "da311";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = da311_channels;
indio_dev->num_channels = ARRAY_SIZE(da311_channels);
ret = da311_reset(client);
if (ret < 0)
return ret;
ret = da311_enable(client, true);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "device_register failed\n");
da311_enable(client, false);
}
return ret;
}
static int da311_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
return da311_enable(client, false);
}
#ifdef CONFIG_PM_SLEEP
static int da311_suspend(struct device *dev)
{
return da311_enable(to_i2c_client(dev), false);
}
static int da311_resume(struct device *dev)
{
return da311_enable(to_i2c_client(dev), true);
}
#endif
static SIMPLE_DEV_PM_OPS(da311_pm_ops, da311_suspend, da311_resume);
static const struct i2c_device_id da311_i2c_id[] = {
{"da311", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, da311_i2c_id);
static struct i2c_driver da311_driver = {
.driver = {
.name = "da311",
.pm = &da311_pm_ops,
},
.probe = da311_probe,
.remove = da311_remove,
.id_table = da311_i2c_id,
};
module_i2c_driver(da311_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("MiraMEMS DA311 3-Axis Accelerometer driver");
MODULE_LICENSE("GPL v2");
|
