summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/virtex440-ml510.dts
blob: 3b736ca26ddc802ccb6ff6086c0cb3b19700e610 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
// SPDX-License-Identifier: GPL-2.0
/*
 * Xilinx ML510 Reference Design support
 *
 * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
 * The reference design contains a bug which prevent PCI DMA from working
 * properly.  A description of the bug is given in the plbv46_pci section. It
 * needs to be fixed by the user until Xilinx updates their reference design.
 *
 * Copyright 2009, Roderick Colenbrander
 */

/dts-v1/;
/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
	dcr-parent = <&ppc440_0>;
	DDR2_SDRAM_DIMM0: memory@0 {
		device_type = "memory";
		reg = < 0x0 0x20000000 >;
	} ;
	alias {
		ethernet0 = &Hard_Ethernet_MAC;
		serial0 = &RS232_Uart_1;
	} ;
	chosen {
		bootargs = "console=ttyS0 root=/dev/ram";
		stdout-path = "/plb@0/serial@83e00000";
	} ;
	cpus {
		#address-cells = <1>;
		#cpus = <0x1>;
		#size-cells = <0>;
		ppc440_0: cpu@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			clock-frequency = <300000000>;
			compatible = "PowerPC,440", "ibm,ppc440";
			d-cache-line-size = <0x20>;
			d-cache-size = <0x8000>;
			dcr-access-method = "native";
			dcr-controller ;
			device_type = "cpu";
			i-cache-line-size = <0x20>;
			i-cache-size = <0x8000>;
			model = "PowerPC,440";
			reg = <0>;
			timebase-frequency = <300000000>;
			xlnx,apu-control = <0x2000>;
			xlnx,apu-udi-0 = <0x0>;
			xlnx,apu-udi-1 = <0x0>;
			xlnx,apu-udi-10 = <0x0>;
			xlnx,apu-udi-11 = <0x0>;
			xlnx,apu-udi-12 = <0x0>;
			xlnx,apu-udi-13 = <0x0>;
			xlnx,apu-udi-14 = <0x0>;
			xlnx,apu-udi-15 = <0x0>;
			xlnx,apu-udi-2 = <0x0>;
			xlnx,apu-udi-3 = <0x0>;
			xlnx,apu-udi-4 = <0x0>;
			xlnx,apu-udi-5 = <0x0>;
			xlnx,apu-udi-6 = <0x0>;
			xlnx,apu-udi-7 = <0x0>;
			xlnx,apu-udi-8 = <0x0>;
			xlnx,apu-udi-9 = <0x0>;
			xlnx,dcr-autolock-enable = <0x1>;
			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
			xlnx,dcu-rd-touch-plb-prio = <0x0>;
			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
			xlnx,dcu-wr-flush-plb-prio = <0x0>;
			xlnx,dcu-wr-store-plb-prio = <0x0>;
			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
			xlnx,dma0-control = <0x0>;
			xlnx,dma0-plb-prio = <0x0>;
			xlnx,dma0-rxchannelctrl = <0x1010000>;
			xlnx,dma0-rxirqtimer = <0x3ff>;
			xlnx,dma0-txchannelctrl = <0x1010000>;
			xlnx,dma0-txirqtimer = <0x3ff>;
			xlnx,dma1-control = <0x0>;
			xlnx,dma1-plb-prio = <0x0>;
			xlnx,dma1-rxchannelctrl = <0x1010000>;
			xlnx,dma1-rxirqtimer = <0x3ff>;
			xlnx,dma1-txchannelctrl = <0x1010000>;
			xlnx,dma1-txirqtimer = <0x3ff>;
			xlnx,dma2-control = <0x0>;
			xlnx,dma2-plb-prio = <0x0>;
			xlnx,dma2-rxchannelctrl = <0x1010000>;
			xlnx,dma2-rxirqtimer = <0x3ff>;
			xlnx,dma2-txchannelctrl = <0x1010000>;
			xlnx,dma2-txirqtimer = <0x3ff>;
			xlnx,dma3-control = <0x0>;
			xlnx,dma3-plb-prio = <0x0>;
			xlnx,dma3-rxchannelctrl = <0x1010000>;
			xlnx,dma3-rxirqtimer = <0x3ff>;
			xlnx,dma3-txchannelctrl = <0x1010000>;
			xlnx,dma3-txirqtimer = <0x3ff>;
			xlnx,endian-reset = <0x0>;
			xlnx,generate-plb-timespecs = <0x1>;
			xlnx,icu-rd-fetch-plb-prio = <0x0>;
			xlnx,icu-rd-spec-plb-prio = <0x0>;
			xlnx,icu-rd-touch-plb-prio = <0x0>;
			xlnx,interconnect-imask = <0xffffffff>;
			xlnx,mplb-allow-lock-xfer = <0x1>;
			xlnx,mplb-arb-mode = <0x0>;
			xlnx,mplb-awidth = <0x20>;
			xlnx,mplb-counter = <0x500>;
			xlnx,mplb-dwidth = <0x80>;
			xlnx,mplb-max-burst = <0x8>;
			xlnx,mplb-native-dwidth = <0x80>;
			xlnx,mplb-p2p = <0x0>;
			xlnx,mplb-prio-dcur = <0x2>;
			xlnx,mplb-prio-dcuw = <0x3>;
			xlnx,mplb-prio-icu = <0x4>;
			xlnx,mplb-prio-splb0 = <0x1>;
			xlnx,mplb-prio-splb1 = <0x0>;
			xlnx,mplb-read-pipe-enable = <0x1>;
			xlnx,mplb-sync-tattribute = <0x0>;
			xlnx,mplb-wdog-enable = <0x1>;
			xlnx,mplb-write-pipe-enable = <0x1>;
			xlnx,mplb-write-post-enable = <0x1>;
			xlnx,num-dma = <0x0>;
			xlnx,pir = <0xf>;
			xlnx,ppc440mc-addr-base = <0x0>;
			xlnx,ppc440mc-addr-high = <0x1fffffff>;
			xlnx,ppc440mc-arb-mode = <0x0>;
			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
			xlnx,ppc440mc-control = <0xf810008f>;
			xlnx,ppc440mc-max-burst = <0x8>;
			xlnx,ppc440mc-prio-dcur = <0x2>;
			xlnx,ppc440mc-prio-dcuw = <0x3>;
			xlnx,ppc440mc-prio-icu = <0x4>;
			xlnx,ppc440mc-prio-splb0 = <0x1>;
			xlnx,ppc440mc-prio-splb1 = <0x0>;
			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
			xlnx,ppcdm-asyncmode = <0x0>;
			xlnx,ppcds-asyncmode = <0x0>;
			xlnx,user-reset = <0x0>;
		} ;
	} ;
	plb_v46_0: plb@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
		ranges ;
		FLASH: flash@fc000000 {
			bank-width = <2>;
			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
			reg = < 0xfc000000 0x2000000 >;
			xlnx,family = "virtex5";
			xlnx,include-datawidth-matching-0 = <0x1>;
			xlnx,include-datawidth-matching-1 = <0x0>;
			xlnx,include-datawidth-matching-2 = <0x0>;
			xlnx,include-datawidth-matching-3 = <0x0>;
			xlnx,include-negedge-ioregs = <0x0>;
			xlnx,include-plb-ipif = <0x1>;
			xlnx,include-wrbuf = <0x1>;
			xlnx,max-mem-width = <0x10>;
			xlnx,mch-native-dwidth = <0x20>;
			xlnx,mch-plb-clk-period-ps = <0x2710>;
			xlnx,mch-splb-awidth = <0x20>;
			xlnx,mch0-accessbuf-depth = <0x10>;
			xlnx,mch0-protocol = <0x0>;
			xlnx,mch0-rddatabuf-depth = <0x10>;
			xlnx,mch1-accessbuf-depth = <0x10>;
			xlnx,mch1-protocol = <0x0>;
			xlnx,mch1-rddatabuf-depth = <0x10>;
			xlnx,mch2-accessbuf-depth = <0x10>;
			xlnx,mch2-protocol = <0x0>;
			xlnx,mch2-rddatabuf-depth = <0x10>;
			xlnx,mch3-accessbuf-depth = <0x10>;
			xlnx,mch3-protocol = <0x0>;
			xlnx,mch3-rddatabuf-depth = <0x10>;
			xlnx,mem0-width = <0x10>;
			xlnx,mem1-width = <0x20>;
			xlnx,mem2-width = <0x20>;
			xlnx,mem3-width = <0x20>;
			xlnx,num-banks-mem = <0x1>;
			xlnx,num-channels = <0x2>;
			xlnx,priority-mode = <0x0>;
			xlnx,synch-mem-0 = <0x0>;
			xlnx,synch-mem-1 = <0x0>;
			xlnx,synch-mem-2 = <0x0>;
			xlnx,synch-mem-3 = <0x0>;
			xlnx,synch-pipedelay-0 = <0x2>;
			xlnx,synch-pipedelay-1 = <0x2>;
			xlnx,synch-pipedelay-2 = <0x2>;
			xlnx,synch-pipedelay-3 = <0x2>;
			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
			xlnx,tavdv-ps-mem-1 = <0x3a98>;
			xlnx,tavdv-ps-mem-2 = <0x3a98>;
			xlnx,tavdv-ps-mem-3 = <0x3a98>;
			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
			xlnx,tcedv-ps-mem-1 = <0x3a98>;
			xlnx,tcedv-ps-mem-2 = <0x3a98>;
			xlnx,tcedv-ps-mem-3 = <0x3a98>;
			xlnx,thzce-ps-mem-0 = <0x88b8>;
			xlnx,thzce-ps-mem-1 = <0x1b58>;
			xlnx,thzce-ps-mem-2 = <0x1b58>;
			xlnx,thzce-ps-mem-3 = <0x1b58>;
			xlnx,thzoe-ps-mem-0 = <0x1b58>;
			xlnx,thzoe-ps-mem-1 = <0x1b58>;
			xlnx,thzoe-ps-mem-2 = <0x1b58>;
			xlnx,thzoe-ps-mem-3 = <0x1b58>;
			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
			xlnx,tlzwe-ps-mem-1 = <0x0>;
			xlnx,tlzwe-ps-mem-2 = <0x0>;
			xlnx,tlzwe-ps-mem-3 = <0x0>;
			xlnx,twc-ps-mem-0 = <0x1adb0>;
			xlnx,twc-ps-mem-1 = <0x3a98>;
			xlnx,twc-ps-mem-2 = <0x3a98>;
			xlnx,twc-ps-mem-3 = <0x3a98>;
			xlnx,twp-ps-mem-0 = <0x11170>;
			xlnx,twp-ps-mem-1 = <0x2ee0>;
			xlnx,twp-ps-mem-2 = <0x2ee0>;
			xlnx,twp-ps-mem-3 = <0x2ee0>;
			xlnx,xcl0-linesize = <0x4>;
			xlnx,xcl0-writexfer = <0x1>;
			xlnx,xcl1-linesize = <0x4>;
			xlnx,xcl1-writexfer = <0x1>;
			xlnx,xcl2-linesize = <0x4>;
			xlnx,xcl2-writexfer = <0x1>;
			xlnx,xcl3-linesize = <0x4>;
			xlnx,xcl3-writexfer = <0x1>;
		} ;
		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "xlnx,compound";
			ethernet@81c00000 {
				compatible = "xlnx,xps-ll-temac-1.01.b";
				device_type = "network";
				interrupt-parent = <&xps_intc_0>;
				interrupts = < 8 2 >;
				llink-connected = <&Hard_Ethernet_MAC_fifo>;
				local-mac-address = [ 02 00 00 00 00 00 ];
				reg = < 0x81c00000 0x40 >;
				xlnx,bus2core-clk-ratio = <0x1>;
				xlnx,phy-type = <0x3>;
				xlnx,phyaddr = <0x1>;
				xlnx,rxcsum = <0x0>;
				xlnx,rxfifo = <0x8000>;
				xlnx,temac-type = <0x0>;
				xlnx,txcsum = <0x0>;
				xlnx,txfifo = <0x8000>;
			} ;
		} ;
		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
			compatible = "xlnx,xps-ll-fifo-1.01.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 6 2 >;
			reg = < 0x81a00000 0x10000 >;
			xlnx,family = "virtex5";
		} ;
		IIC_EEPROM: i2c@81600000 {
			compatible = "xlnx,xps-iic-2.00.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 9 2 >;
			reg = < 0x81600000 0x10000 >;
			xlnx,clk-freq = <0x5f5e100>;
			xlnx,family = "virtex5";
			xlnx,gpo-width = <0x1>;
			xlnx,iic-freq = <0x186a0>;
			xlnx,scl-inertial-delay = <0x5>;
			xlnx,sda-inertial-delay = <0x5>;
			xlnx,ten-bit-adr = <0x0>;
		} ;
		LCD_OPTIONAL: gpio@81420000 {
			compatible = "xlnx,xps-gpio-1.00.a";
			reg = < 0x81420000 0x10000 >;
			xlnx,all-inputs = <0x0>;
			xlnx,all-inputs-2 = <0x0>;
			xlnx,dout-default = <0x0>;
			xlnx,dout-default-2 = <0x0>;
			xlnx,family = "virtex5";
			xlnx,gpio-width = <0xb>;
			xlnx,interrupt-present = <0x0>;
			xlnx,is-bidir = <0x1>;
			xlnx,is-bidir-2 = <0x1>;
			xlnx,is-dual = <0x0>;
			xlnx,tri-default = <0xffffffff>;
			xlnx,tri-default-2 = <0xffffffff>;
		} ;
		LEDs_4Bit: gpio@81400000 {
			compatible = "xlnx,xps-gpio-1.00.a";
			reg = < 0x81400000 0x10000 >;
			xlnx,all-inputs = <0x0>;
			xlnx,all-inputs-2 = <0x0>;
			xlnx,dout-default = <0x0>;
			xlnx,dout-default-2 = <0x0>;
			xlnx,family = "virtex5";
			xlnx,gpio-width = <0x4>;
			xlnx,interrupt-present = <0x0>;
			xlnx,is-bidir = <0x1>;
			xlnx,is-bidir-2 = <0x1>;
			xlnx,is-dual = <0x0>;
			xlnx,tri-default = <0xffffffff>;
			xlnx,tri-default-2 = <0xffffffff>;
		} ;
		RS232_Uart_1: serial@83e00000 {
			clock-frequency = <100000000>;
			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
			current-speed = <9600>;
			device_type = "serial";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 11 2 >;
			reg = < 0x83e00000 0x10000 >;
			reg-offset = <0x1003>;
			reg-shift = <2>;
			xlnx,family = "virtex5";
			xlnx,has-external-rclk = <0x0>;
			xlnx,has-external-xin = <0x0>;
			xlnx,is-a-16550 = <0x1>;
		} ;
		SPI_EEPROM: xps-spi@feff8000 {
			compatible = "xlnx,xps-spi-2.00.b";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 10 2 >;
			reg = < 0xfeff8000 0x80 >;
			xlnx,family = "virtex5";
			xlnx,fifo-exist = <0x1>;
			xlnx,num-ss-bits = <0x1>;
			xlnx,num-transfer-bits = <0x8>;
			xlnx,sck-ratio = <0x80>;
		} ;
		SysACE_CompactFlash: sysace@83600000 {
			compatible = "xlnx,xps-sysace-1.00.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 7 2 >;
			reg = < 0x83600000 0x10000 >;
			xlnx,family = "virtex5";
			xlnx,mem-width = <0x10>;
		} ;
		plbv46_pci_0: plbv46-pci@85e00000 {
			#size-cells = <2>;
			#address-cells = <3>;
			compatible = "xlnx,plbv46-pci-1.03.a";
			device_type = "pci";
			reg = < 0x85e00000 0x10000 >;

			/*
			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
			 * 0 which means that a read/write to the memory mapped
			 * i/o region (which starts at 0xa0000000) for pci
			 * bar 0 on the plb side translates to 0.
			 * It is important to set this value to 0xa0000000, so
			 * that inbound and outbound pci transactions work
			 * properly including DMA.
			 */
			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;

			#interrupt-cells = <1>;
			interrupt-parent = <&xps_intc_0>;
			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
			interrupt-map = <
				/* IRQ mapping for pci slots and ALI M1533
				 * periperhals. In total there are 5 interrupt
				 * lines connected to a xps_intc controller.
				 * Four of them are PCI IRQ A, B, C, D and
				 * which correspond to respectively xpx_intc
				 * 5, 4, 3 and 2.  The fifth interrupt line is
				 * connected to the south bridge and this one
				 * uses irq 1 and is active high instead of
				 * active low.
				 *
				 * The M1533 contains various peripherals
				 * including AC97 audio, a modem, USB, IDE and
				 * some power management stuff. The modem
				 * isn't connected on the ML510 and the power
				 * management core also isn't used.
				 */

				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
				0x3000 0 0 1 &xps_intc_0 3 2
				0x3000 0 0 2 &xps_intc_0 2 2
				0x3000 0 0 3 &xps_intc_0 5 2
				0x3000 0 0 4 &xps_intc_0 4 2

				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
				/*
				0x11800 0 0 1 &xps_intc_0 5 0 2
				0x11800 0 0 2 &xps_intc_0 4 0 2
				0x11800 0 0 3 &xps_intc_0 3 0 2
				0x11800 0 0 4 &xps_intc_0 2 0 2
				*/

				/* According to the datasheet + schematic
				 * ABCD [FPGA] of slot 5 is mapped to DABC.
				 * Testing showed that at least A maps to B,
				 * the mapping of the other pins is a guess
				 * and for that reason the lines have been
				 * commented out.
				 */
				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
				0x2800 0 0 1 &xps_intc_0 4 2
				/*
				0x2800 0 0 2 &xps_intc_0 3 2
				0x2800 0 0 3 &xps_intc_0 2 2
				0x2800 0 0 4 &xps_intc_0 5 2
				*/

				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
				/*
				0x11000 0 0 1 &xps_intc_0 4 0 2
				0x11000 0 0 2 &xps_intc_0 3 0 2
				0x11000 0 0 3 &xps_intc_0 2 0 2
				0x11000 0 0 4 &xps_intc_0 5 0 2
				*/

				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
				0x0800 0 0 1 &i8259 7 2

				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
				0x5800 0 0 1 &i8259 14 2

				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
				0x7800 0 0 1 &i8259 7 2
			>;
			ali_m1533 {
				#size-cells = <1>;
				#address-cells = <2>;
				i8259: interrupt-controller@20 {
					reg = <1 0x20 2
							1 0xa0 2
							1 0x4d0 2>;
					interrupt-controller;
					device_type = "interrupt-controller";
					#address-cells = <0>;
					#interrupt-cells = <2>;
					compatible = "chrp,iic";

					/* south bridge irq is active high */
					interrupts = <1 3>;
					interrupt-parent = <&xps_intc_0>;
				};
			};
		} ;
		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
			reg = < 0xffff0000 0x10000 >;
			xlnx,family = "virtex5";
		} ;
		xps_intc_0: interrupt-controller@81800000 {
			#interrupt-cells = <0x2>;
			compatible = "xlnx,xps-intc-1.00.a";
			interrupt-controller ;
			reg = < 0x81800000 0x10000 >;
			xlnx,num-intr-inputs = <0xc>;
		} ;
		xps_tft_0: tft@86e00000 {
			compatible = "xlnx,xps-tft-1.00.a";
			reg = < 0x86e00000 0x10000 >;
			xlnx,dcr-splb-slave-if = <0x1>;
			xlnx,default-tft-base-addr = <0x0>;
			xlnx,family = "virtex5";
			xlnx,i2c-slave-addr = <0x76>;
			xlnx,mplb-awidth = <0x20>;
			xlnx,mplb-dwidth = <0x80>;
			xlnx,mplb-native-dwidth = <0x40>;
			xlnx,mplb-smallest-slave = <0x20>;
			xlnx,tft-interface = <0x1>;
		} ;
	} ;
}  ;