summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
blob: 08816fb474f5d552dec09b381839bcf7278e221b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
/*
 * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
 *
 * Copyright 2013 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/{
       aliases {
		ethernet3 = &enet3;
		ethernet4 = &enet4;
       };
};

&lbc {
	nor@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "cfi-flash";
		reg = <0x0 0x0 0x4000000>;
		bank-width = <2>;
		device-width = <1>;

		partition@0 {
			/* This location must not be altered  */
			/* 256KB for Vitesse 7385 Switch firmware */
			reg = <0x0 0x00040000>;
			label = "NOR Vitesse-7385 Firmware";
			read-only;
		};

		partition@40000 {
			/* 256KB for DTB Image */
			reg = <0x00040000 0x00040000>;
			label = "NOR DTB Image";
		};

		partition@80000 {
			/* 5.5 MB for Linux Kernel Image */
			reg = <0x00080000 0x00580000>;
			label = "NOR Linux Kernel Image";
		};

		partition@400000 {
			/* 56.75MB for Root file System */
			reg = <0x00600000 0x038c0000>;
			label = "NOR Root File System";
		};

		partition@ec0000 {
			/* This location must not be altered  */
			/* 256KB for QE ucode firmware*/
			reg = <0x03ec0000 0x00040000>;
			label = "NOR QE microcode firmware";
			read-only;
		};

		partition@f00000 {
			/* This location must not be altered  */
			/* 512KB for u-boot Bootloader Image */
			/* 512KB for u-boot Environment Variables */
			reg = <0x03f00000 0x00100000>;
			label = "NOR U-Boot Image";
			read-only;
		};
	};

	/* CS2 for Display */
	display@2,0 {
		compatible = "solomon,ssd1289fb";
		reg = <0x2 0x0000 0x0004>;
	};

};

&soc {
	usb@22000 {
		phy_type = "ulpi";
	};

	mdio@24000 {
		phy0: ethernet-phy@2 {
			interrupt-parent = <&mpic>;
			interrupts = <1 1 0 0>;
			reg = <0x2>;
		};

		phy1: ethernet-phy@1 {
			interrupt-parent = <&mpic>;
			interrupts = <2 1 0 0>;
			reg = <0x1>;
		};

		tbi0: tbi-phy@11 {
			reg = <0x11>;
			device_type = "tbi-phy";
		};
	};

	mdio@25000 {
		tbi1: tbi-phy@11 {
			reg = <0x11>;
			device_type = "tbi-phy";
		};
	};

	mdio@26000 {
		tbi2: tbi-phy@11 {
			reg = <0x11>;
			device_type = "tbi-phy";
		};
	};

	ptp_clock@b0e00 {
		compatible = "fsl,etsec-ptp";
		reg = <0xb0e00 0xb0>;
		interrupts = <68 2 0 0 69 2 0 0>;
		fsl,tclk-period	= <10>;
		fsl,tmr-prsc	= <2>;
		fsl,tmr-add	= <0xc0000021>;
		fsl,tmr-fiper1	= <999999990>;
		fsl,tmr-fiper2	= <99990>;
		fsl,max-adj	= <133333332>;
	};

	enet0: ethernet@b0000 {
		phy-handle = <&phy0>;
		phy-connection-type = "rgmii-id";

	};

	enet1: ethernet@b1000 {
		status = "disabled";
	};

	enet2: ethernet@b2000 {
		phy-handle = <&phy1>;
		phy-connection-type = "rgmii-id";
	};

	par_io@e0100 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xe0100 0x60>;
		ranges = <0x0 0xe0100 0x60>;
		device_type = "par_io";
		num-ports = <3>;
		pio1: ucc_pin@01 {
			pio-map = <
		/* port  pin  dir  open_drain  assignment  has_irq */
				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
		};

		pio2: ucc_pin@02 {
			pio-map = <
		/* port  pin  dir  open_drain  assignment  has_irq */
				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
		};

		pio3: ucc_pin@03 {
			pio-map = <
		/* port  pin  dir  open_drain  assignment  has_irq */
				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
		};

		pio4: ucc_pin@04 {
			pio-map = <
		/* port  pin  dir  open_drain  assignment  has_irq */
				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
		};
	};
};

&qe {
	enet3: ucc@2000 {
		device_type = "network";
		compatible = "ucc_geth";
		rx-clock-name = "clk12";
		tx-clock-name = "clk9";
		pio-handle = <&pio1>;
		phy-handle = <&qe_phy0>;
		phy-connection-type = "mii";
	};

	mdio@2120 {
		qe_phy0: ethernet-phy@18 {
			interrupt-parent = <&mpic>;
			interrupts = <4 1 0 0>;
			reg = <0x18>;
			device_type = "ethernet-phy";
		};
		qe_phy1: ethernet-phy@19 {
			interrupt-parent = <&mpic>;
			interrupts = <5 1 0 0>;
			reg = <0x19>;
			device_type = "ethernet-phy";
		};
		tbi-phy@11 {
			reg = <0x11>;
			device_type = "tbi-phy";
		};
	};

	enet4: ucc@2400 {
		device_type = "network";
		compatible = "ucc_geth";
		rx-clock-name = "none";
		tx-clock-name = "clk13";
		pio-handle = <&pio2>;
		phy-handle = <&qe_phy1>;
		phy-connection-type = "rmii";
	};

	serial2: ucc@2600 {
		device_type = "serial";
		compatible = "ucc_uart";
		port-number = <0>;
		rx-clock-name = "brg6";
		tx-clock-name = "brg6";
		pio-handle = <&pio3>;
	};

	serial3: ucc@2200 {
		device_type = "serial";
		compatible = "ucc_uart";
		port-number = <1>;
		rx-clock-name = "brg2";
		tx-clock-name = "brg2";
		pio-handle = <&pio4>;
	};
};