summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
blob: a0aeac61992996bf56bf741ef1dcd21ca7898a14 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
 * Copyright 2020-2021 TQ-Systems GmbH
 */

/dts-v1/;

#include "imx8mm-tqma8mqml.dtsi"
#include "mba8mx.dtsi"

/ {
	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";

	aliases {
		eeprom0 = &eeprom3;
		mmc0 = &usdhc3;
		mmc1 = &usdhc2;
		mmc2 = &usdhc1;
		rtc0 = &pcf85063;
		rtc1 = &snvs_rtc;
	};

	reg_usdhc2_vmmc: regulator-vmmc {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		startup-delay-us = <100>;
		off-on-delay-us = <12000>;
	};

	connector {
		compatible = "gpio-usb-b-connector", "usb-b-connector";
		type = "micro";
		label = "X19";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usb1_connector>;
		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				usb_dr_connector: endpoint {
					remote-endpoint = <&usb1_drd_sw>;
				};
			};
		};
	};
};

&i2c1 {
	expander2: gpio@27 {
		compatible = "nxp,pca9555";
		reg = <0x27>;
		gpio-controller;
		#gpio-cells = <2>;
		vcc-supply = <&reg_vcc_3v3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_expander>;
		interrupt-parent = <&gpio1>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};
};

&pcie_phy {
	clocks = <&pcie0_refclk>;
	status = "okay";
};

&pcie0 {
	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
		<&pcie0_refclk>;
	clock-names = "pcie", "pcie_aux", "pcie_bus";
	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
				<&clk IMX8MM_CLK_PCIE1_CTRL>;
	assigned-clock-rates = <10000000>, <250000000>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
				<&clk IMX8MM_SYS_PLL2_250M>;
	status = "okay";
};

&sai3 {
	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
		<&clk IMX8MM_AUDIO_PLL2_OUT>;
};

&tlv320aic3x04 {
	clock-names = "mclk";
	clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
};

&uart1 {
	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
};

&uart2 {
	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	dr_mode = "otg";
	srp-disable;
	hnp-disable;
	adp-disable;
	power-active-high;
	over-current-active-low;
	usb-role-switch;
	status = "okay";

	port {
		usb1_drd_sw: endpoint {
			remote-endpoint = <&usb_dr_connector>;
		};
	};
};

&usbotg2 {
	dr_mode = "host";
	disable-over-current;
	vbus-supply = <&reg_hub_vbus>;
	status = "okay";
};

&iomuxc {
	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000006>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000006>,
			   <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000006>;
	};

	pinctrl_expander: expandergrp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
	};

	pinctrl_fec1: fec1grp {
		fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
			   <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
			   <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
			   <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
			   <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
			   <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
			   <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
			   <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
			   <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
			   <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
			   <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
			   <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
			   <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
			   <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
	};

	pinctrl_gpiobutton: gpiobuttongrp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
			   <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
			   <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
	};

	pinctrl_gpioled: gpioledgrp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
			   <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000004>,
			   <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000004>;
	};

	pinctrl_i2c2_gpio: i2c2gpiogrp {
		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000004>,
			   <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000004>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000004>,
			   <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000004>;
	};

	pinctrl_i2c3_gpio: i2c3gpiogrp {
		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000004>,
			   <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000004>;
	};

	pinctrl_pwm3: pwm3grp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
	};

	pinctrl_pwm4: pwm4grp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
	};

	pinctrl_sai3: sai3grp {
		fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
			   <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
			   <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
			   <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
			   <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
			   <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
			   <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
			   <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
			   <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
			   <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
			   <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
	};

	pinctrl_usbotg1: usbotg1grp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
	};

	pinctrl_usb1_connector: usb1-connectorgrp {
		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
	};

	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
		fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
	};
};