summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
blob: 120d6e997a4c5c55b505fc14a723db2aac066f27 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (C) 2018 PHYTEC Messtechnik GmbH
 * Author: Christian Hemp <c.hemp@phytec.de>
 */


/ {
	aliases {
		rtc0 = &i2c_rtc;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_backlight>;
		pwms = <&pwm1 0 5000000>;
		status = "okay";
	};

	gpio_leds: leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpioleds>;
		status = "disabled";

		red {
			label = "phyboard-mira:red";
			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
		};

		green {
			label = "phyboard-mira:green";
			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
		};

		blue {
			label = "phyboard-mira:blue";
			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
		};
	};

	reg_backlight: regulator-backlight {
		compatible = "regulator-fixed";
		regulator-name = "backlight_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	reg_en_switch: regulator-en-switch {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_en_switch>;
		regulator-name = "Enable Switch";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
		regulator-always-on;
	};

	reg_flexcan1: regulator-flexcan1 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flexcan1_en>;
		regulator-name = "flexcan1-reg";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;
		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_panel: regulator-panel {
		compatible = "regulator-fixed";
		regulator-name = "panel-power-supply";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
	};

	reg_pcie: regulator-pcie {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pcie_reg>;
		regulator-name = "mPCIe_1V5";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;
		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb_h1_vbus: usb-h1-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh1_vbus>;
		regulator-name = "usb_h1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usbotg_vbus: usbotg-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg_vbus>;
		regulator-name = "usb_otg_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	panel {
		compatible = "auo,g104sn02";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_panel_en>;
		power-supply = <&reg_panel>;
		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
		backlight = <&backlight>;

		port {
			panel_in: endpoint {
				remote-endpoint = <&lvds0_out>;
			};
		};
	};
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	xceiver-supply = <&reg_flexcan1>;
	status = "disabled";
};

&hdmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hdmicec>;
	ddc-i2c-bus = <&i2c2>;
	status = "disabled";
};

&i2c1 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c1>;
	pinctrl-1 = <&pinctrl_i2c1_gpio>;
	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	clock-frequency = <400000>;
	status = "disabled";

	stmpe: touchctrl@44 {
		compatible = "st,stmpe811";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_stmpe>;
		reg = <0x44>;
		interrupt-parent = <&gpio7>;
		interrupts = <12 IRQ_TYPE_NONE>;
		status = "disabled";

		stmpe_touchscreen {
			compatible = "st,stmpe-ts";
			st,sample-time = <4>;
			st,mod-12b = <1>;
			st,ref-sel = <0>;
			st,adc-freq = <1>;
			st,ave-ctrl = <1>;
			st,touch-det-delay = <2>;
			st,settling = <2>;
			st,fraction-z = <7>;
			st,i-drive = <1>;
		};
	};

	i2c_rtc: rtc@68 {
		compatible = "microcrystal,rv4162";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_rtc_int>;
		reg = <0x68>;
		interrupt-parent = <&gpio7>;
		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
		status = "disabled";
	};
};

&i2c2 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c2>;
	pinctrl-1 = <&pinctrl_i2c2_gpio>;
	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	clock-frequency = <100000>;
	status = "disabled";
};

&ldb {
	status = "okay";

	lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <24>;
		status = "disabled";

		port@4 {
			reg = <4>;

			lvds0_out: endpoint {
				remote-endpoint = <&panel_in>;
			};
		};
	};
};

&pcie {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcie>;
	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
	vpcie-supply = <&reg_pcie>;
	status = "disabled";
};

&pwm1 {
	#pwm-cells = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	uart-has-rtscts;
	status = "disabled";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	disable-over-current;
	status = "disabled";
};

&usbotg {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	vbus-supply = <&reg_usbotg_vbus>;
	disable-over-current;
	status = "disabled";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
	no-1-8-v;
	disable-wp;
	status = "disabled";
};

&iomuxc {
	pinctrl_panel_en: panelen1grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
		>;
	};

	pinctrl_en_switch: enswitchgrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
		>;
	};

	pinctrl_flexcan1_en: flexcan1engrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
		>;
	};

	pinctrl_gpioleds: gpioledsgrp {
		fsl,pins = <
			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
		>;
	};

	pinctrl_hdmicec: hdmicecgrp {
		fsl,pins = <
			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
		>;
	};

	pinctrl_i2c1_gpio: i2c1gpiogrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
		>;
	};

	pinctrl_i2c2_gpio: i2c2gpiogrp {
		fsl,pins = <
			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
		>;
	};

	pinctrl_pcie: pciegrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
		>;
	};

	pinctrl_pcie_reg: pciereggrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
		>;
	};

	pinctrl_rtc_int: rtcintgrp {
		fsl,pins = <
			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
		>;
	};

	pinctrl_stmpe: stmpegrp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
		>;
	};

	pinctrl_usbh1_vbus: usbh1vbusgrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
		>;
	};

	pinctrl_usbotg: usbotggrp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
		>;
	};

	pinctrl_usbotg_vbus: usbotgvbusgrp {
		fsl,pins = <
			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
		>;
	};
};