summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
blob: 1b18728732071f2dafd265be647c45a989eae693 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
/*
 * support for the imx6 based aristainetos2 board
 *
 * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License
 *     version 2 as published by the Free Software Foundation.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>

/ {
	backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
	};

	regulators {
		compatible = "simple-bus";

		reg_2p5v: 2p5v {
			compatible = "regulator-fixed";
			regulator-name = "2P5V";
			regulator-min-microvolt = <2500000>;
			regulator-max-microvolt = <2500000>;
			regulator-always-on;
		};

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usbh1_vbus: usb-h1-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbotg_vbus: usb-otg-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&can2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	status = "okay";
};

&ecspi1 {
	cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
		    &gpio4 10 GPIO_ACTIVE_HIGH
		    &gpio4 11 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	status = "okay";
};

&ecspi2 {
	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	status = "okay";
};

&ecspi4 {
	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi4>;
	status = "okay";

	flash: m25p80@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q128a11", "jedec,spi-nor";
		spi-max-frequency = <20000000>;
		reg = <1>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		interrupt-parent = <&gpio1>;
		interrupts = <04 0x8>;

		regulators {
			bcore1 {
				regulator-name = "bcore1";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			bcore2 {
				regulator-name = "bcore2";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			bpro {
				regulator-name = "bpro";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			bperi {
				regulator-name = "bperi";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			bmem {
				regulator-name = "bmem";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo2 {
				regulator-name = "ldo2";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1800000>;
			};

			ldo3 {
				regulator-name = "ldo3";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo4 {
				regulator-name = "ldo4";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo5 {
				regulator-name = "ldo5";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo6 {
				regulator-name = "ldo6";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo7 {
				regulator-name = "ldo7";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo8 {
				regulator-name = "ldo8";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo9 {
				regulator-name = "ldo9";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo10 {
				regulator-name = "ldo10";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			ldo11 {
				regulator-name = "ldo11";
				regulator-always-on = <1>;
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <3300000>;
			};

			bio {
				regulator-name = "bio";
				regulator-always-on = <1>;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
			};
		};
	};

	tmp103: tmp103@71 {
		compatible = "ti,tmp103";
		reg = <0x71>;
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	expander: tca6416@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		#gpio-cells = <2>;
		gpio-controller;
	};

	rtc@68 {
		compatible = "dallas,m41t00";
		reg = <0x68>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

	eeprom@50{
		compatible = "atmel,24c64";
		reg = <0x50>;
	};

	eeprom@57{
		compatible = "atmel,24c64";
		reg = <0x57>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii";
	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
	txd0-skew-ps = <0>;
	txd1-skew-ps = <0>;
	txd2-skew-ps = <0>;
	txd3-skew-ps = <0>;
	status = "okay";
};

&gpmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpmi_nand>;
	status = "okay";
};

&pcie {
	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	uart-has-rtscts;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	uart-has-rtscts;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usbh1_vbus>;
	dr_mode = "host";
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usbotg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	disable-over-current;
	dr_mode = "host";
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
	no-1-8-v;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
	no-1-8-v;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio>;

	pinctrl_audmux: audmux {
		fsl,pins = <
			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
		>;
	};

	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
		>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
		>;
	};

	pinctrl_ecspi4: ecspi4grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
		>;
	};

	pinctrl_enet: enetgrp {
		fsl,pins = <
			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
		>;
	};

	pinctrl_gpio: gpiogrp {
		fsl,pins = <
			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
		>;
	};

	pinctrl_gpmi_nand: gpmi-nand {
		fsl,pins = <
			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
		>;
	};

	pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
		>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <
			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
		>;
	};

	pinctrl_usbotg: usbotggrp {
		fsl,pins = <
			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
		>;
	};

	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
	};

	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
		>;
	};
};