summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra72-evm.dts
blob: 154b0a0ceb18e1f4a684ac660d8bed92fd7044a2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
/*
 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include "dra72-evm-common.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
/ {
	model = "TI DRA722";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
	};

	evm_1v8_sw: fixedregulator-evm_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "evm_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&smps4_reg>;
		regulator-always-on;
		regulator-boot-on;
	};
};

&i2c1 {
	tps65917: tps65917@58 {
		reg = <0x58>;

		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
	};
};

#include "dra72-evm-tps65917.dtsi"

&hdmi {
	vdda-supply = <&ldo3_reg>;
};

&pcf_gpio_21 {
	interrupt-parent = <&gpio6>;
	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
};

&mac {
	slaves = <1>;
	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
};

&cpsw_emac0 {
	phy-handle = <&ethphy0>;
	phy-mode = "rgmii";
};

&davinci_mdio {
	ethphy0: ethernet-phy@3 {
		reg = <3>;
	};
};

&mmc1 {
	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
	pinctrl-0 = <&mmc1_pins_default>;
	pinctrl-1 = <&mmc1_pins_hs>;
	pinctrl-2 = <&mmc1_pins_sdr12>;
	pinctrl-3 = <&mmc1_pins_sdr25>;
	pinctrl-4 = <&mmc1_pins_sdr50>;
	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
	vqmmc-supply = <&ldo1_reg>;
};

&mmc2 {
	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
	pinctrl-0 = <&mmc2_pins_default>;
	pinctrl-1 = <&mmc2_pins_hs>;
	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
	vmmc-supply = <&evm_1v8_sw>;
};