1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
|
=============================================
Sound Blaster Audigy mixer / default DSP code
=============================================
This is based on sb-live-mixer.rst.
The EMU10K2 chips have a DSP part which can be programmed to support
various ways of sample processing, which is described here.
(This article does not deal with the overall functionality of the
EMU10K2 chips. See the manuals section for further details.)
The ALSA driver programs this portion of chip by default code
(can be altered later) which offers the following functionality:
Digital mixer controls
======================
These controls are built using the DSP instructions. They offer extended
functionality. Only the default build-in code in the ALSA driver is described
here. Note that the controls work as attenuators: the maximum value is the
neutral position leaving the signal unchanged. Note that if the same destination
is mentioned in multiple controls, the signal is accumulated and can be wrapped
(set to maximal or minimal value without checking of overflow).
Explanation of used abbreviations:
DAC
digital to analog converter
ADC
analog to digital converter
I2S
one-way three wire serial bus for digital sound by Philips Semiconductors
(this standard is used for connecting standalone DAC and ADC converters)
LFE
low frequency effects (subwoofer signal)
AC97
a chip containing an analog mixer, DAC and ADC converters
IEC958
S/PDIF
FX-bus
the EMU10K2 chip has an effect bus containing 64 accumulators.
Each of the synthesizer voices can feed its output to these accumulators
and the DSP microcontroller can operate with the resulting sum.
name='PCM Front Playback Volume',index=0
----------------------------------------
This control is used to attenuate samples for left and right front PCM FX-bus
accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM
samples for 5.1 playback. The result samples are forwarded to the front DAC PCM
slots of the Philips DAC.
name='PCM Surround Playback Volume',index=0
-------------------------------------------
This control is used to attenuate samples for left and right surround PCM FX-bus
accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM
samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM
slots of the Philips DAC.
name='PCM Center Playback Volume',index=0
-----------------------------------------
This control is used to attenuate samples for center PCM FX-bus accumulator.
ALSA uses accumulator 6 for center PCM sample for 5.1 playback. The result sample
is forwarded to the center DAC PCM slot of the Philips DAC.
name='PCM LFE Playback Volume',index=0
--------------------------------------
This control is used to attenuate sample for LFE PCM FX-bus accumulator.
ALSA uses accumulator 7 for LFE PCM sample for 5.1 playback. The result sample
is forwarded to the LFE DAC PCM slot of the Philips DAC.
name='PCM Playback Volume',index=0
----------------------------------
This control is used to attenuate samples for left and right PCM FX-bus
accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for
stereo playback. The result samples are forwarded to the front DAC PCM slots
of the Philips DAC.
name='PCM Capture Volume',index=0
---------------------------------
This control is used to attenuate samples for left and right PCM FX-bus
accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
The result is forwarded to the ADC capture FIFO (thus to the standard capture
PCM device).
name='Music Playback Volume',index=0
------------------------------------
This control is used to attenuate samples for left and right MIDI FX-bus
accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
name='Music Capture Volume',index=0
-----------------------------------
These controls are used to attenuate samples for left and right MIDI FX-bus
accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
The result is forwarded to the ADC capture FIFO (thus to the standard capture
PCM device).
name='Mic Playback Volume',index=0
----------------------------------
This control is used to attenuate samples for left and right Mic input.
For Mic input is used AC97 codec. The result samples are forwarded to
the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic
capture FIFO (device 1 - 16bit/8KHz mono) too without volume control.
name='Mic Capture Volume',index=0
---------------------------------
This control is used to attenuate samples for left and right Mic input.
The result is forwarded to the ADC capture FIFO (thus to the standard capture
PCM device).
name='Audigy CD Playback Volume',index=0
----------------------------------------
This control is used to attenuate samples from left and right IEC958 TTL
digital inputs (usually used by a CDROM drive). The result samples are
forwarded to the front DAC PCM slots of the Philips DAC.
name='Audigy CD Capture Volume',index=0
---------------------------------------
This control is used to attenuate samples from left and right IEC958 TTL
digital inputs (usually used by a CDROM drive). The result samples are
forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
name='IEC958 Optical Playback Volume',index=0
---------------------------------------------
This control is used to attenuate samples from left and right IEC958 optical
digital input. The result samples are forwarded to the front DAC PCM slots
of the Philips DAC.
name='IEC958 Optical Capture Volume',index=0
--------------------------------------------
This control is used to attenuate samples from left and right IEC958 optical
digital inputs. The result samples are forwarded to the ADC capture FIFO
(thus to the standard capture PCM device).
name='Line2 Playback Volume',index=0
------------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs (on the AudigyDrive). The result samples are forwarded to the front
DAC PCM slots of the Philips DAC.
name='Line2 Capture Volume',index=1
-----------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs (on the AudigyDrive). The result samples are forwarded to the ADC
capture FIFO (thus to the standard capture PCM device).
name='Analog Mix Playback Volume',index=0
-----------------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs from Philips ADC. The result samples are forwarded to the front
DAC PCM slots of the Philips DAC. This contains mix from analog sources
like CD, Line In, Aux, ....
name='Analog Mix Capture Volume',index=1
----------------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs Philips ADC. The result samples are forwarded to the ADC
capture FIFO (thus to the standard capture PCM device).
name='Aux2 Playback Volume',index=0
-----------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs (on the AudigyDrive). The result samples are forwarded to the front
DAC PCM slots of the Philips DAC.
name='Aux2 Capture Volume',index=1
----------------------------------
This control is used to attenuate samples from left and right I2S ADC
inputs (on the AudigyDrive). The result samples are forwarded to the ADC
capture FIFO (thus to the standard capture PCM device).
name='Front Playback Volume',index=0
------------------------------------
All stereo signals are mixed together and mirrored to surround, center and LFE.
This control is used to attenuate samples for left and right front speakers of
this mix.
name='Surround Playback Volume',index=0
---------------------------------------
All stereo signals are mixed together and mirrored to surround, center and LFE.
This control is used to attenuate samples for left and right surround speakers of
this mix.
name='Center Playback Volume',index=0
-------------------------------------
All stereo signals are mixed together and mirrored to surround, center and LFE.
This control is used to attenuate sample for center speaker of this mix.
name='LFE Playback Volume',index=0
----------------------------------
All stereo signals are mixed together and mirrored to surround, center and LFE.
This control is used to attenuate sample for LFE speaker of this mix.
name='Tone Control - Switch',index=0
------------------------------------
This control turns the tone control on or off. The samples for front, rear
and center / LFE outputs are affected.
name='Tone Control - Bass',index=0
----------------------------------
This control sets the bass intensity. There is no neutral value!!
When the tone control code is activated, the samples are always modified.
The closest value to pure signal is 20.
name='Tone Control - Treble',index=0
------------------------------------
This control sets the treble intensity. There is no neutral value!!
When the tone control code is activated, the samples are always modified.
The closest value to pure signal is 20.
name='Master Playback Volume',index=0
-------------------------------------
This control is used to attenuate samples for front, surround, center and
LFE outputs.
name='IEC958 Optical Raw Playback Switch',index=0
-------------------------------------------------
If this switch is on, then the samples for the IEC958 (S/PDIF) digital
output are taken only from the raw FX8010 PCM, otherwise standard front
PCM samples are taken.
PCM stream related controls
===========================
name='EMU10K1 PCM Volume',index 0-31
------------------------------------
Channel volume attenuation in range 0-0xffff. The maximum value (no
attenuation) is default. The channel mapping for three values is
as follows:
* 0 - mono, default 0xffff (no attenuation)
* 1 - left, default 0xffff (no attenuation)
* 2 - right, default 0xffff (no attenuation)
name='EMU10K1 PCM Send Routing',index 0-31
------------------------------------------
This control specifies the destination - FX-bus accumulators. There 24
values with this mapping:
* 0 - mono, A destination (FX-bus 0-63), default 0
* 1 - mono, B destination (FX-bus 0-63), default 1
* 2 - mono, C destination (FX-bus 0-63), default 2
* 3 - mono, D destination (FX-bus 0-63), default 3
* 4 - mono, E destination (FX-bus 0-63), default 0
* 5 - mono, F destination (FX-bus 0-63), default 0
* 6 - mono, G destination (FX-bus 0-63), default 0
* 7 - mono, H destination (FX-bus 0-63), default 0
* 8 - left, A destination (FX-bus 0-63), default 0
* 9 - left, B destination (FX-bus 0-63), default 1
* 10 - left, C destination (FX-bus 0-63), default 2
* 11 - left, D destination (FX-bus 0-63), default 3
* 12 - left, E destination (FX-bus 0-63), default 0
* 13 - left, F destination (FX-bus 0-63), default 0
* 14 - left, G destination (FX-bus 0-63), default 0
* 15 - left, H destination (FX-bus 0-63), default 0
* 16 - right, A destination (FX-bus 0-63), default 0
* 17 - right, B destination (FX-bus 0-63), default 1
* 18 - right, C destination (FX-bus 0-63), default 2
* 19 - right, D destination (FX-bus 0-63), default 3
* 20 - right, E destination (FX-bus 0-63), default 0
* 21 - right, F destination (FX-bus 0-63), default 0
* 22 - right, G destination (FX-bus 0-63), default 0
* 23 - right, H destination (FX-bus 0-63), default 0
Don't forget that it's illegal to assign a channel to the same FX-bus accumulator
more than once (it means 0=0 && 1=0 is an invalid combination).
name='EMU10K1 PCM Send Volume',index 0-31
-----------------------------------------
It specifies the attenuation (amount) for given destination in range 0-255.
The channel mapping is following:
* 0 - mono, A destination attn, default 255 (no attenuation)
* 1 - mono, B destination attn, default 255 (no attenuation)
* 2 - mono, C destination attn, default 0 (mute)
* 3 - mono, D destination attn, default 0 (mute)
* 4 - mono, E destination attn, default 0 (mute)
* 5 - mono, F destination attn, default 0 (mute)
* 6 - mono, G destination attn, default 0 (mute)
* 7 - mono, H destination attn, default 0 (mute)
* 8 - left, A destination attn, default 255 (no attenuation)
* 9 - left, B destination attn, default 0 (mute)
* 10 - left, C destination attn, default 0 (mute)
* 11 - left, D destination attn, default 0 (mute)
* 12 - left, E destination attn, default 0 (mute)
* 13 - left, F destination attn, default 0 (mute)
* 14 - left, G destination attn, default 0 (mute)
* 15 - left, H destination attn, default 0 (mute)
* 16 - right, A destination attn, default 0 (mute)
* 17 - right, B destination attn, default 255 (no attenuation)
* 18 - right, C destination attn, default 0 (mute)
* 19 - right, D destination attn, default 0 (mute)
* 20 - right, E destination attn, default 0 (mute)
* 21 - right, F destination attn, default 0 (mute)
* 22 - right, G destination attn, default 0 (mute)
* 23 - right, H destination attn, default 0 (mute)
MANUALS/PATENTS
===============
ftp://opensource.creative.com/pub/doc
-------------------------------------
LM4545.pdf
AC97 Codec
m2049.pdf
The EMU10K1 Digital Audio Processor
hog63.ps
FX8010 - A DSP Chip Architecture for Audio Effects
WIPO Patents
------------
WO 9901813 (A1)
Audio Effects Processor with multiple asynchronous streams
(Jan. 14, 1999)
WO 9901814 (A1)
Processor with Instruction Set for Audio Effects (Jan. 14, 1999)
WO 9901953 (A1)
Audio Effects Processor having Decoupled Instruction
Execution and Audio Data Sequencing (Jan. 14, 1999)
US Patents (https://www.uspto.gov/)
----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
US 5928342
Audio Effects Processor integrated on a single chip
with a multiport memory onto which multiple asynchronous
digital sound samples can be concurrently loaded
(Jul. 27, 1999)
US 5930158
Processor with Instruction Set for Audio Effects (Jul. 27, 1999)
US 6032235
Memory initialization circuit (Tram) (Feb. 29, 2000)
US 6138207
Interpolation looping of audio samples in cache connected to
system bus with prioritization and modification of bus transfers
in accordance with loop ends and minimum block sizes
(Oct. 24, 2000)
US 6151670
Method for conserving memory storage using a
pool of short term memory registers
(Nov. 21, 2000)
US 6195715
Interrupt control for multiple programs communicating with
a common interrupt by associating programs to GP registers,
defining interrupt register, polling GP registers, and invoking
callback routine associated with defined interrupt register
(Feb. 27, 2001)
|
