summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
blob: 12c740b975f786903a73acb3ef1a166f15d55d83 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver

On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
sensors (THS) which are the analog circuits for measuring temperature (Tj)
inside the LSI.

Required properties:
- compatible		: "renesas,<soctype>-thermal",
			  Examples with soctypes are:
			    - "renesas,r8a774a1-thermal" (RZ/G2M)
			    - "renesas,r8a774b1-thermal" (RZ/G2N)
			    - "renesas,r8a7795-thermal" (R-Car H3)
			    - "renesas,r8a7796-thermal" (R-Car M3-W)
			    - "renesas,r8a77965-thermal" (R-Car M3-N)
			    - "renesas,r8a77980-thermal" (R-Car V3H)
- reg			: Address ranges of the thermal registers. Each sensor
			  needs one address range. Sorting must be done in
			  increasing order according to datasheet, i.e.
			  TSC1, TSC2, ...
- clocks		: Must contain a reference to the functional clock.
- #thermal-sensor-cells : must be <1>.

Optional properties:

- interrupts		: interrupts routed to the TSC (must be 3).
- power-domain		: Must contain a reference to the power domain. This
			  property is mandatory if the thermal sensor instance
			  is part of a controllable power domain.

Example:

	tsc: thermal@e6198000 {
		compatible = "renesas,r8a7795-thermal";
		reg = <0 0xe6198000 0 0x100>,
		      <0 0xe61a0000 0 0x100>,
		      <0 0xe61a8000 0 0x100>;
		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cpg CPG_MOD 522>;
		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
		#thermal-sensor-cells = <1>;
	};

	thermal-zones {
		sensor_thermal1: sensor-thermal1 {
			polling-delay-passive = <250>;
			polling-delay = <1000>;
			thermal-sensors = <&tsc 0>;

			trips {
				sensor1_crit: sensor1-crit {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};
	};