1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
maintainers:
- Robin Gong <yibin.gong@nxp.com>
description: |
Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
definition for each of these nodes is defined using the standard
binding for regulators at
Documentation/devicetree/bindings/regulator/regulator.txt.
Datasheet is available at
https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
#The valid names for PCA9450 regulator nodes are:
#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
#LDO1, LDO2, LDO3, LDO4, LDO5
#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
properties:
compatible:
enum:
- nxp,pca9450a
- nxp,pca9450b
- nxp,pca9450c
reg:
maxItems: 1
interrupts:
maxItems: 1
regulators:
type: object
description: |
list of regulators provided by this controller
patternProperties:
"^LDO[1-5]$":
type: object
$ref: regulator.yaml#
description:
Properties for single LDO regulator.
unevaluatedProperties: false
"^BUCK[1-6]$":
type: object
$ref: regulator.yaml#
description:
Properties for single BUCK regulator.
properties:
nxp,dvs-run-voltage:
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 600000
maximum: 2187500
description:
PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
dvs(dynamic voltage scaling) property.
nxp,dvs-standby-voltage:
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 600000
maximum: 2187500
description:
PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
dvs(dynamic voltage scaling) property.
unevaluatedProperties: false
additionalProperties: false
sd-vsel-gpios:
description: GPIO that is used to switch LDO5 between being configured by
LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
connected to a host GPIO.
nxp,i2c-lt-enable:
type: boolean
description:
Indicates that the I2C Level Translator is used.
nxp,wdog_b-warm-reset:
type: boolean
description:
When WDOG_B signal is asserted a warm reset will be done instead of cold
reset.
required:
- compatible
- reg
- interrupts
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@25 {
compatible = "nxp,pca9450b";
reg = <0x25>;
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
};
buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
|
