summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/marvell-pp2.txt
blob: ce15c173f43fc5519c196d0278702145f7a2cbda (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
* Marvell Armada 375 Ethernet Controller (PPv2.1)
  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
  Marvell CN913X Ethernet Controller (PPv2.3)

Required properties:

- compatible: should be one of:
    "marvell,armada-375-pp2"
    "marvell,armada-7k-pp2"
- reg: addresses and length of the register sets for the device.
  For "marvell,armada-375-pp2", must contain the following register
  sets:
	- common controller registers
	- LMS registers
	- one register area per Ethernet port
  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
  sets:
	- packet processor registers
	- networking interfaces registers
	- CM3 address space used for TX Flow Control

- clocks: pointers to the reference clocks for this device, consequently:
	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
	- MG clock (only for armada-7k-pp2)
	- MG Core clock (only for armada-7k-pp2)
	- AXI clock (only for armada-7k-pp2)
- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).

The ethernet ports are represented by subnodes. At least one port is
required.

Required properties (port):

- interrupts: interrupt(s) for the port
- port-id: ID of the port from the MAC point of view
- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
  GOP (Group Of Ports) point of view. This ID is used to index the
  per-port registers in the second register area.
- phy-mode: See ethernet.txt file in the same directory

Optional properties (port):

- marvell,loopback: port is loopback mode
- phy: a phandle to a phy node defining the PHY address (as the reg
  property, a single integer).
- interrupt-names: if more than a single interrupt for is given, must be the
                   name associated to the interrupts listed. Valid names are:
                   "hifX", with X in [0..8], and "link". The names "tx-cpu0",
                   "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
                   for backward compatibility but shouldn't be used for new
                   additions.
- marvell,system-controller: a phandle to the system controller.

Example for marvell,armada-375-pp2:

ethernet@f0000 {
	compatible = "marvell,armada-375-pp2";
	reg = <0xf0000 0xa000>,
	      <0xc0000 0x3060>,
	      <0xc4000 0x100>,
	      <0xc5000 0x100>;
	clocks = <&gateclk 3>, <&gateclk 19>;
	clock-names = "pp_clk", "gop_clk";

	eth0: eth0@c4000 {
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
		port-id = <0>;
		phy = <&phy0>;
		phy-mode = "gmii";
	};

	eth1: eth1@c5000 {
		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
		port-id = <1>;
		phy = <&phy3>;
		phy-mode = "gmii";
	};
};

Example for marvell,armada-7k-pp2:

cpm_ethernet: ethernet@0 {
	compatible = "marvell,armada-7k-pp22";
	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";

	eth0: eth0 {
		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
				  "hif5", "hif6", "hif7", "hif8", "link";
		port-id = <0>;
		gop-port-id = <0>;
	};

	eth1: eth1 {
		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
				  "hif5", "hif6", "hif7", "hif8", "link";
		port-id = <1>;
		gop-port-id = <2>;
	};

	eth2: eth2 {
		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
			     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
				  "hif5", "hif6", "hif7", "hif8", "link";
		port-id = <2>;
		gop-port-id = <3>;
	};
};