summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
blob: 86dd8191b04c5e5787a5961b9129a5824089657a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Allwinner SoCs' GPADC Device Tree bindings
------------------------------------------
The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller.

Required properties:
  - compatible: "allwinner,sun8i-a33-ths",
  - reg: mmio address range of the chip,
  - #thermal-sensor-cells: shall be 0,
  - #io-channel-cells: shall be 0,

Example:
	ths: ths@1c25000 {
		compatible = "allwinner,sun8i-a33-ths";
		reg = <0x01c25000 0x100>;
		#thermal-sensor-cells = <0>;
		#io-channel-cells = <0>;
	};

sun4i, sun5i and sun6i SoCs are also supported via the older binding:

sun4i resistive touchscreen controller
--------------------------------------

Required properties:
 - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
   "allwinner,sun6i-a31-ts"
 - reg: mmio address range of the chip
 - interrupts: interrupt to which the chip is connected
 - #thermal-sensor-cells: shall be 0

Optional properties:
 - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
				   is attached to the controller
 - allwinner,tp-sensitive-adjust : integer (4 bits)
				   adjust sensitivity of pen down detection
				   between 0 (least sensitive) and 15
				   (defaults to 15)
 - allwinner,filter-type	 : integer (2 bits)
				   select median and averaging filter
				   samples used for median / averaging filter
				   0: 4/2
				   1: 5/3
				   2: 8/4
				   3: 16/8
				   (defaults to 1)

Example:

	rtp: rtp@1c25000 {
		compatible = "allwinner,sun4i-a10-ts";
		reg = <0x01c25000 0x100>;
		interrupts = <29>;
		allwinner,ts-attached;
		#thermal-sensor-cells = <0>;
		/* sensitive/noisy touch panel */
		allwinner,tp-sensitive-adjust = <0>;
		allwinner,filter-type = <3>;
	};