1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
|
* Amlogic Meson SAR (Successive Approximation Register) A/D converter
Required properties:
- compatible: depending on the SoC this should be one of:
- "amlogic,meson8-saradc" for Meson8
- "amlogic,meson8b-saradc" for Meson8b
- "amlogic,meson-gxbb-saradc" for GXBB
- "amlogic,meson-gxl-saradc" for GXL
- "amlogic,meson-gxm-saradc" for GXM
- "amlogic,meson-axg-saradc" for AXG
along with the generic "amlogic,meson-saradc"
- reg: the physical base address and length of the registers
- interrupts: the interrupt indicating end of sampling
- clocks: phandle and clock identifier (see clock-names)
- clock-names: mandatory clocks:
- "clkin" for the reference clock (typically XTAL)
- "core" for the SAR ADC core clock
optional clocks:
- "adc_clk" for the ADC (sampling) clock
- "adc_sel" for the ADC (sampling) clock mux
- vref-supply: the regulator supply for the ADC reference voltage
- #io-channel-cells: must be 1, see ../iio-bindings.txt
Example:
saradc: adc@8680 {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
#io-channel-cells = <1>;
reg = <0x0 0x8680 0x0 0x34>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
|
