summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
blob: e0a4ba599abcd074e388ffa8957bafb98f71d10a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
Binding for MediaTek's CPUFreq driver
=====================================

Required properties:
- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
- clock-names: Should contain the following:
	"cpu"		- The multiplexer for clock input of CPU cluster.
	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
			  source (usually MAINPLL) when the original CPU PLL is under
			  transition and not stable yet.
	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
	generic clock consumer properties.
- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
	for detail.
- proc-supply: Regulator for Vproc of CPU cluster.

Optional properties:
- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
	       needs to do "voltage tracking" to step by step scale up/down Vproc and
	       Vsram to fit SoC specific needs. When absent, the voltage scaling
	       flow is handled by hardware, hence no software "voltage tracking" is
	       needed.
- mediatek,cci:
	Used to confirm the link status between cpufreq and mediatek cci. Because
	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
	To prevent the issue of high frequency and low voltage, we need to use this
	property to make sure mediatek cci is ready.
	For details of mediatek cci, please refer to
	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
- #cooling-cells:
	For details, please refer to
	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml

Example 1 (MT7623 SoC):

	cpu_opp_table: opp_table {
		compatible = "operating-points-v2";
		opp-shared;

		opp-598000000 {
			opp-hz = /bits/ 64 <598000000>;
			opp-microvolt = <1050000>;
		};

		opp-747500000 {
			opp-hz = /bits/ 64 <747500000>;
			opp-microvolt = <1050000>;
		};

		opp-1040000000 {
			opp-hz = /bits/ 64 <1040000000>;
			opp-microvolt = <1150000>;
		};

		opp-1196000000 {
			opp-hz = /bits/ 64 <1196000000>;
			opp-microvolt = <1200000>;
		};

		opp-1300000000 {
			opp-hz = /bits/ 64 <1300000000>;
			opp-microvolt = <1300000>;
		};
	};

	cpu0: cpu@0 {
		device_type = "cpu";
		compatible = "arm,cortex-a7";
		reg = <0x0>;
		clocks = <&infracfg CLK_INFRA_CPUSEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
		operating-points-v2 = <&cpu_opp_table>;
		#cooling-cells = <2>;
	};
	cpu@1 {
		device_type = "cpu";
		compatible = "arm,cortex-a7";
		reg = <0x1>;
		operating-points-v2 = <&cpu_opp_table>;
	};
	cpu@2 {
		device_type = "cpu";
		compatible = "arm,cortex-a7";
		reg = <0x2>;
		operating-points-v2 = <&cpu_opp_table>;
	};
	cpu@3 {
		device_type = "cpu";
		compatible = "arm,cortex-a7";
		reg = <0x3>;
		operating-points-v2 = <&cpu_opp_table>;
	};

Example 2 (MT8173 SoC):
	cpu_opp_table_a: opp_table_a {
		compatible = "operating-points-v2";
		opp-shared;

		opp-507000000 {
			opp-hz = /bits/ 64 <507000000>;
			opp-microvolt = <859000>;
		};

		opp-702000000 {
			opp-hz = /bits/ 64 <702000000>;
			opp-microvolt = <908000>;
		};

		opp-1001000000 {
			opp-hz = /bits/ 64 <1001000000>;
			opp-microvolt = <983000>;
		};

		opp-1105000000 {
			opp-hz = /bits/ 64 <1105000000>;
			opp-microvolt = <1009000>;
		};

		opp-1183000000 {
			opp-hz = /bits/ 64 <1183000000>;
			opp-microvolt = <1028000>;
		};

		opp-1404000000 {
			opp-hz = /bits/ 64 <1404000000>;
			opp-microvolt = <1083000>;
		};

		opp-1508000000 {
			opp-hz = /bits/ 64 <1508000000>;
			opp-microvolt = <1109000>;
		};

		opp-1573000000 {
			opp-hz = /bits/ 64 <1573000000>;
			opp-microvolt = <1125000>;
		};
	};

	cpu_opp_table_b: opp_table_b {
		compatible = "operating-points-v2";
		opp-shared;

		opp-507000000 {
			opp-hz = /bits/ 64 <507000000>;
			opp-microvolt = <828000>;
		};

		opp-702000000 {
			opp-hz = /bits/ 64 <702000000>;
			opp-microvolt = <867000>;
		};

		opp-1001000000 {
			opp-hz = /bits/ 64 <1001000000>;
			opp-microvolt = <927000>;
		};

		opp-1209000000 {
			opp-hz = /bits/ 64 <1209000000>;
			opp-microvolt = <968000>;
		};

		opp-1404000000 {
			opp-hz = /bits/ 64 <1007000000>;
			opp-microvolt = <1028000>;
		};

		opp-1612000000 {
			opp-hz = /bits/ 64 <1612000000>;
			opp-microvolt = <1049000>;
		};

		opp-1807000000 {
			opp-hz = /bits/ 64 <1807000000>;
			opp-microvolt = <1089000>;
		};

		opp-1989000000 {
			opp-hz = /bits/ 64 <1989000000>;
			opp-microvolt = <1125000>;
		};
	};

	cpu0: cpu@0 {
		device_type = "cpu";
		compatible = "arm,cortex-a53";
		reg = <0x000>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA53SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
		operating-points-v2 = <&cpu_opp_table_a>;
	};

	cpu1: cpu@1 {
		device_type = "cpu";
		compatible = "arm,cortex-a53";
		reg = <0x001>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA53SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
		operating-points-v2 = <&cpu_opp_table_a>;
	};

	cpu2: cpu@100 {
		device_type = "cpu";
		compatible = "arm,cortex-a72";
		reg = <0x100>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA72SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
		operating-points-v2 = <&cpu_opp_table_b>;
	};

	cpu3: cpu@101 {
		device_type = "cpu";
		compatible = "arm,cortex-a72";
		reg = <0x101>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA72SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
		operating-points-v2 = <&cpu_opp_table_b>;
	};

	&cpu0 {
		proc-supply = <&mt6397_vpca15_reg>;
	};

	&cpu1 {
		proc-supply = <&mt6397_vpca15_reg>;
	};

	&cpu2 {
		proc-supply = <&da9211_vcpu_reg>;
		sram-supply = <&mt6397_vsramca7_reg>;
	};

	&cpu3 {
		proc-supply = <&da9211_vcpu_reg>;
		sram-supply = <&mt6397_vsramca7_reg>;
	};