1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
Binding for IDT VersaClock 5,6 programmable i2c clock generators.
The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
generators providing from 3 to 12 output clocks.
==I2C device node==
Required properties:
- compatible: shall be one of
"idt,5p49v5923"
"idt,5p49v5925"
"idt,5p49v5933"
"idt,5p49v5935"
"idt,5p49v6901"
"idt,5p49v6965"
- reg: i2c device address, shall be 0x68 or 0x6a.
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock handles,
- 5p49v5923 and
5p49v5925 and
5p49v6901: (required) either or both of XTAL or CLKIN
reference clock.
- 5p49v5933 and
- 5p49v5935: (optional) property not present (internal
Xtal used) or CLKIN reference
clock.
- clock-names: from common clock binding; clock input names, can be
- 5p49v5923 and
5p49v5925 and
5p49v6901: (required) either or both of "xin", "clkin".
- 5p49v5933 and
- 5p49v5935: (optional) property not present or "clkin".
For all output ports, a corresponding, optional child node named OUT1,
OUT2, etc. can represent a each output, and the node can be used to
specify the following:
- itd,mode: can be one of the following:
- VC5_LVPECL
- VC5_CMOS
- VC5_HCSL33
- VC5_LVDS
- VC5_CMOS2
- VC5_CMOSD
- VC5_HCSL25
- idt,voltage-microvolts: can be one of the following
- 1800000
- 2500000
- 3300000
- idt,slew-percent: Percent of normal, can be one of
- 80
- 85
- 90
- 100
==Mapping between clock specifier and physical pins==
When referencing the provided clock in the DT using phandle and
clock specifier, the following mapping applies:
5P49V5923:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT2
5P49V5933:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT4
5P49V5925 and
5P49V5935:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT2
3 -- OUT3
4 -- OUT4
5P49V6901:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT2
3 -- OUT3
4 -- OUT4
==Example==
/* 25MHz reference crystal */
ref25: ref25m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
i2c-master-node {
/* IDT 5P49V5923 i2c clock generator */
vc5: clock-generator@6a {
compatible = "idt,5p49v5923";
reg = <0x6a>;
#clock-cells = <1>;
/* Connect XIN input to 25MHz reference */
clocks = <&ref25m>;
clock-names = "xin";
OUT1 {
itd,mode = <VC5_CMOS>;
idt,voltage-microvolts = <1800000>;
idt,slew-percent = <80>;
};
OUT2 {
...
};
...
};
};
/* Consumer referencing the 5P49V5923 pin OUT1 */
consumer {
...
clocks = <&vc5 1>;
...
}
|
