summaryrefslogtreecommitdiffstats
path: root/sound/soc/atmel/sam9g20_wm8731.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-15ASoC: sam9g20_wm8731: Simplify some error messageChristophe JAILLET1-1/+1
dev_err_probe() already prints the error code in a human readable way, so there is no need to duplicate it as a numerical value at the end of the message. Fixes: 29f4078f777f ("ASoC: sam9g20_wm8731: Use dev_err_probe() for snd_soc_register_card()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/fb959b3bda689aa47e1fbe9948de957b77530b24.1659764734.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-09ASoC: sam9g20_wm8731: Use dev_err_probe() for snd_soc_register_card()Mark Brown1-1/+2
Log the error code when snd_soc_regster_card() fails, but fold in the silencing of deferred probe errors. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220506130349.451452-1-broonie@kernel.org
2022-04-04ASoC: atmel: Don't squash error codes from atmel_ssc_set_audio()Mark Brown1-2/+2
The AT91SAM9G20-EK audio driver is replacing any error code returned by atmel_ssc_set_audio() with -EINVAL which could be unhelpful for debugging. Pass through the error code, and include it in the log message we print for good measure. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220325154241.1600757-4-broonie@kernel.org
2022-04-04ASoC: atmel: Fix error handling in at91samg20ek probe()Mark Brown1-3/+6
The error handling in the AT91SAM9G20-EK machine driver probe did not consistently free the SSC in error paths, sometimes immediately returning an error rather than doing cleanup. Fix this. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220325154241.1600757-3-broonie@kernel.org
2022-04-04ASoC: atmel: Remove system clock tree configuration for at91sam9g20ekMark Brown1-61/+0
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the PCK0 output of the SoC, intended in the reference software to be supplied using PLLB and programmed to 12MHz. As originally written for use with a board file the audio driver was responsible for configuring the entire tree but in the conversion to the common clock framework the registration of the named pck0 and pllb clocks was removed so the driver has failed to instantiate ever since. Since the WM8731 driver has had support for managing a MCLK provided via the common clock framework for some time we can simply drop all the clock management code from the machine driver other than configuration of the sysclk rate, the CODEC driver still respects that configuration from the machine driver. Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org
2022-03-07ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probeMiaoqian Lin1-0/+1
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-16ASoC: atmel: Convert to new style DAI format definitionsMark Brown1-1/+1
Convert the Atmel drivers to use the new style defines for clocking in DAI formats. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Peter Rosin <peda@axentia.se>
2020-03-27ASoC: atmel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointerKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87369zk5ul.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: atmel: sam9g20_wm8731: consider CPU-Platform possibilityKuninori Morimoto1-1/+4
commit bfc7938e58142a5 ("ASoC: atmel: sam9g20_wm8731: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit bfc7938e58142a5 ("ASoC: atmel: sam9g20_wm8731: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown1-14/+1
Linux 5.2-rc6
2019-06-19ASoC: atmel: sam9g20_wm8731: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06ASoC: atmel: sam9g20_wm8731: use modern dai_link styleKuninori Morimoto1-10/+12
ASoC is now supporting modern style dai_link (= snd_soc_dai_link_component) for CPU/Codec/Platform. This patch switches to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22ASoC: sam9g20_wm8731: use dev_*() logging functionsLadislav Michl1-9/+8
Use dev_*() logging functions instead of plain printk and as messages are now properly prefixed drop 'ASoC' prefix as well. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: at91sam9g20ek: Automatically disconnect non-connected pinsLars-Peter Clausen1-7/+3
According to the schematics the both LHPOUT and RHPOUT are connected to the external connector. RHPOUT is missing from the DAPM routes, but otherwise they seem to be complete. This patch adds the missing route and then sets the fully_routed flag for the card. This allows to remove all the manual calls to snd_soc_dapm_nc_pin(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-02ASoC: sam9g20_wm8731: drop machine_is_xxxAlexandre Belloni1-37/+31
Atmel based boards can now only be used with device tree. Drop non DT initialization. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-04Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and ↵Mark Brown1-28/+2
'asoc/topic/davinci' into asoc-next
2015-01-06ASoC: atmel: sam9g20_wm8731: remove useless includeAlexandre Belloni1-1/+0
A mach/ header is included but never used. Simply remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-06ASoC: sam9g20_wm8731: Use static DAI format setupLars-Peter Clausen1-28/+2
Set the dai_fmt field in the dai_link struct instead of manually calling snd_soc_dai_fmt(). This makes the code cleaner and shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: atmel: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-07ASoC: sam9g20_wm8731: remove useless mach/gpio.hNicolas Ferre1-1/+0
This include file is about to disapear. In addition it is useless for this code. So it is time to remove it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Brown <broonie@linaro.org>
2014-03-10ASoC: sam9g20_wm8731: Convert to table based DAPM setupLars-Peter Clausen1-13/+7
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. While we are at it also remove the snd_soc_dapm_enable_pin() in the init callback. Pins are enabled by default. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-16ASoC: atmel: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-12ASoC: sam9g20ek: Let device core handle pinctrlMark Brown1-9/+0
Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com>
2013-02-04ASoC: sam9g20_wm8731: disable clock and correct sequence when unloadBo Shen1-3/+3
disable clock and correct sequence when unload Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10ASoC: atmel: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-16ASoC: at91sam9g20ek-wm8731: convert to dt supportBo Shen1-2/+61
convert at91sam9g20ek with wm8731 to device tree support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-16ASoC: atmel-ssc-dai: match new method of dai and pcm registerBo Shen1-2/+10
Remove unneeded code with the new method of dai and pcm register Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-06ASoC: sam9g20-wm8731: convert to use snd_soc_register_card()Bo Shen1-29/+22
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22ASoC: atmel: Add .owner to struct snd_soc_cardAxel Lin1-0/+1
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-08ASoC: Remove redundant snd_soc_dapm_sync() calls from machine driversMark Brown1-2/+0
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-06ASoC: Add context parameter to card DAPM callbacksMark Brown1-0/+1
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-26ASoC: sam9g20_wm8731: use the proper SYSCKL valueNicolas Ferre1-1/+1
at91sam9g20 is providing master clock to wm8731: not using a crystal but an external MCLK. We can avoid conflict and save power using WM8731_SYSCLK_MCLK as we do not need oscillator to be powered. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: Remove -codec from WM8731 driver nameMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2010-11-25Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-1/+4
2010-11-25ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error pathAxel Lin1-1/+4
Fix the error path to properly free allocated resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-2/+2
2010-11-22ASoC: atmel: test wrong variableVasiliy Kulikov1-2/+2
After clk_get() mclk is checked second time instead of pllb check. In patch v1 Jarkko Nikula noticed that PTR_ERR() is also has wrong argument. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dapm.hJarkko Nikula1-1/+0
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-06ASoC: Decouple DAPM from CODECsLiam Girdwood1-8/+9
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18ASoC: Add simplfied device registration for Atmel SSC devicesMark Brown1-0/+6
Since the SSC is already being registered as a device under arch and the DMA and SSC hardware are pretty much the same provide a simplified device registration function for the Atmel SSC which will add the ASoC-specific devices within the ASoC code, parenting the SSC device off the actual SSC device. Also use it in the sam9g20-ek driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: Fix device name for AT91SAM9G20-EK devicesMark Brown1-2/+2
A couple of typos in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: Support non-crystal master clocks for WM8731Mark Brown1-1/+1
Instead of unconditionally enabling the crystal oscillator on the WM8731 only enable it when explicitly selected via set_sysclk(), allowing machine drivers to specify that they drive a clock into MCLK alone. This avoids any conflicts between the oscillator and the external MCLK source and saves power for systems which do not need the oscillator. This should also deliver a small power saving on systems using the crystal since the oscillator will only be enabled when the ADC or DAC is active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood1-41/+10
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-10-09ASoC: at91sam9g20ek_2mmc board uses same audio connexion as at91sam9g20ekNicolas Ferre1-1/+1
The modified revision of at91sam9g20 Evaluation Kit rev. C and onwards share with previous ones its audio connexion to Wolfson wm8731. Modify the SoC file to extend the machine ID checking. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-14Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-36/+0
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits) [ARM] Update mach-types ARM: 5636/1: Move vendor enum to AMBA include ARM: Fix pfn_valid() for sparse memory [ARM] orion5x: Add LaCie NAS 2Big Network support [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board ARM: 5689/1: Update default config of HP Jornada 700-series machines ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem ARM: 5688/1: ks8695_serial: disable_irq() lockup ARM: 5687/1: fix an oops with highmem ARM: 5684/1: Add nuc960 platform to w90x900 ARM: 5683/1: Add nuc950 platform to w90x900 ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver ARM: 5625/1: fix hard coded 4K resource size in amba bus detection MMC: MMCI: convert realview MMC to use gpiolib ARM: 5685/1: Make MMCI driver compile without gpiolib ARM: implement highpte ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ ... Fix up trivial conflict in arch/arm/kernel/signal.c. It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-07-09[ARM] 5596/1: at91sam9g20-ek: Register WM8731 in board fileMark Brown1-36/+0
The WM8731 driver has been updated to allow registration via normal device model methods rather than from within the ASoC driver probe so update the AT91SAM9G20-EK to make use of this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-08ASoC: Configure WM8731 SYSCLK at startup on AT91SAM9G20-EKMark Brown1-25/+10
The system clock is currently fixed by the driver and this avoids the need for us to handle errors with enabling and disabling MCLK (which was incorrect previously so this fixes bugs in error handling). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08ASoC: Disable microphone input for AT91SAM9G20-EK by defaultMark Brown1-1/+13
As shipped the board does not have inputs but it is relatively straightforward to modify the board to hook them up so support is provided in the driver. When these modifications have not been made enabling the microphone stage can cause problems. Add an ifdef to disable this by default. Don't put it into Kconfig since users will have to get their soldering irons out to change things. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08ASoC: Use CODEC as clock master on AT91SAM9G20-EKMark Brown1-87/+2
This simplifies the driver by removing the need to manually configure dividers within the CPU and improve audio performance by ensuring that the optimal phase relationships between the clocks in the system are maintained. Note that currently this means that for playback to work the Output Mixer HiFi switch must be enabled since otherwise CODEC will not generate the DAC clock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-27 02:37:33 +0000