summaryrefslogtreecommitdiffstats
path: root/scripts/Makefile.modbuiltin
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07kbuild: create modules.builtin without Makefile.modbuiltin or tristate.confMasahiro Yamada1-57/+0
Commit bc081dd6e9f6 ("kbuild: generate modules.builtin") added infrastructure to generate modules.builtin, the list of all builtin modules. Basically, it works like this: - Kconfig generates include/config/tristate.conf, the list of tristate CONFIG options with a value in a capital letter. - scripts/Makefile.modbuiltin makes Kbuild descend into directories to collect the information of builtin modules. I am not a big fan of it because Kbuild ends up with traversing the source tree twice. I am not sure how perfectly it should work, but this approach cannot avoid false positives; even if the relevant CONFIG option is tristate, some Makefiles forces obj-m to obj-y. Some examples are: arch/powerpc/platforms/powermac/Makefile: obj-$(CONFIG_NVRAM:m=y) += nvram.o net/ipv6/Makefile: obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o net/netlabel/Makefile: obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o Nobody has complained about (or noticed) it, so it is probably fine to have false positives in modules.builtin. This commit simplifies the implementation. Let's exploit the fact that every module has MODULE_LICENSE(). (modpost shows a warning if MODULE_LICENSE is missing. If so, 0-day bot would already have blocked such a module.) I added MODULE_FILE to <linux/module.h>. When the code is being compiled as builtin, it will be filled with the file path of the module, and collected into modules.builtin.info. Then, scripts/link-vmlinux.sh extracts the list of builtin modules out of it. This new approach fixes the false-positives above, but adds another type of false-positives; non-modular code may have MODULE_LICENSE() by mistake. This is not a big deal, it is just the code is always orphan. We can clean it up if we like. You can see cleanup examples by: $ git log --grep='make.* explicitly non-modular' To sum up, this commits deletes lots of code, but still produces almost equivalent results. Please note it does not increase the vmlinux size at all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo section is discarded in the link stage. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-07-17kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}Masahiro Yamada1-1/+1
Removing the 'kernel/' prefix will make our life easier because we can simply do 'cat modules.order' to get all built modules with full paths. Currently, we parse the first line of '*.mod' files in $(MODVERDIR). Since we have duplicated functionality here, I plan to remove MODVERDIR entirely. In fact, modules.order is generated also for external modules in a broken format. It adds the 'kernel/' prefix to the absolute path of the module, like this: kernel//path/to/your/external/module/foo.ko This is fine for now since modules.order is not used for external modules. However, I want to sanitize the format everywhere towards the goal of removing MODVERDIR. We cannot change the format of installed module.{order,builtin}. So, 'make modules_install' will add the 'kernel/' prefix while copying them to $(MODLIB)/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctreeMasahiro Yamada1-1/+1
Commit 25b146c5b8ce ("kbuild: allow Kbuild to start from any directory") deprecated KBUILD_SRCTREE. It is only used in tools/testing/selftest/ to distinguish out-of-tree build. Replace it with a new boolean flag, building_out_of_srctree. I also replaced the conditional ($(srctree),.) because the next commit will allow an absolute path to be used for $(srctree) even when building in the source tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-02kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree buildMasahiro Yamada1-1/+1
KBUILD_SRC was conventionally used for some different purposes: [1] To remember the source tree path [2] As a flag to check if sub-make is already done [3] As a flag to check if Kbuild runs out of tree For [1], we do not need to remember it because the top Makefile can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST)))) [2] has been replaced with self-commenting 'sub_make_done'. For [3], we can distinguish in-tree/out-of-tree by comparing $(srctree) and '.' This commit converts [3] to prepare for the KBUILD_SRC removal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-03Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatoryDirk Gouders1-2/+2
The files auto.conf and tristate.conf are mandatory for building modules.builtin files, therefore include them as such. Usually, the top-level Makefile ensures that those files exist but we want to make sure we get noticed if they are missing for whatever reason. Signed-off-by: Dirk Gouders <dirk@gouders.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-06kbuild: remove duplicated comments about PHONYMasahiro Yamada1-4/+0
The comment is the same as in the top-level Makefile. Also, the comments contain typos: - the .PHONY variable -> the PHONY variable - se we can ... -> so we can ... Instead of fixing the typos, just remove the duplicated comments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2010-06-10kbuild: Create output directory in Makefile.modbuiltinMichal Marek1-0/+5
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12kbuild: generate modules.builtinMichal Marek1-0/+55
To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: Michal Marek <mmarek@suse.cz>