summaryrefslogtreecommitdiffstats
path: root/net/wireless/util.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+4
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21wifi: cfg80211: Fix bitrates overflow issuePaul Zhang1-2/+4
When invoking function cfg80211_calculate_bitrate_eht about (320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2, this formula (result * rate->nss) will overflow and causes the returned bitrate to be 3959 when it should be 57646. Here is the explanation: u64 tmp; u32 result; … /* tmp = result = 4 * rates_996[0] * = 4 * 480388888 = 0x72889c60 */ tmp = result; /* tmp = 0x72889c60 * 6144 = 0xabccea90000 */ tmp *= SCALE; /* tmp = 0xabccea90000 / mcs_divisors[13] * = 0xabccea90000 / 5120 = 0x8970bba6 */ do_div(tmp, mcs_divisors[rate->mcs]); /* result = 0x8970bba6 */ result = tmp; /* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c, * but since result is u32, (result * rate->nss) = 0x12e1774c, * overflow happens and it loses the highest bit. * Then result = 0x12e1774c / 8 = 39595753, */ result = (result * rate->nss) / 8; Signed-off-by: Paul Zhang <quic_paulz@quicinc.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg1-19/+21
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad1-1/+3
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packetsFelix Fietkau1-19/+21
STP topology change notification packets only have a payload of 7 bytes, so they get dropped due to the skb->len < hdrlen + 8 check. Fix this by removing the extra 8 from the skb->len check and checking the return code on the skb_copy_bits calls. Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27wifi: cfg80211: fix MCS divisor valueTamizh Chelvam Raja1-2/+2
The Bitrate for HE/EHT MCS6 is calculated wrongly due to the incorrect MCS divisor value for mcs6. Fix it with the proper value. previous mcs_divisor value = (11769/6144) = 1.915527 fixed mcs_divisor value = (11377/6144) = 1.851725 Fixes: 9c97c88d2f4b ("cfg80211: Add support to calculate and report 4096-QAM HE rates") Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam1-2/+2
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add cfg80211_get_iftype_ext_capa()Johannes Berg1-0/+14
Add a helper function cfg80211_get_iftype_ext_capa() to look up interface type-specific (extended) capabilities. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: clean up links appropriatelyJohannes Berg1-0/+43
This was missing earlier, we need to remove links when interfaces are being destroyed, and we also need to stop (AP) operations when a link is being destroyed. Address these issues to remove many warnings that will otherwise appear in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg1-7/+37
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski1-0/+131
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-06wireless: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-16nl80211: add EHT MCS supportVeerendranath Jakkam1-0/+131
Add support for reporting and calculating EHT bitrates. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-7-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAPJohannes Berg1-3/+5
There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15cfg80211: call cfg80211_stop_ap when switch from P2P_GO typeNguyen Dinh Phi1-0/+1
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com Cc: stable@vger.kernel.org Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+7
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25cfg80211: correct bridge/4addr mode checkJanusz Dziedzic1-7/+7
Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: Add LC placeholder band definition to nl80211_bandSrinivasan Raju1-0/+2
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-31cfg80211: call cfg80211_leave_ocb when switching away from OCBDu Cheng1-0/+3
If the userland switches back-and-forth between NL80211_IFTYPE_OCB and NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a chance where the cleanup cfg80211_leave_ocb() is not called. This leads to initialization of in-use memory (e.g. init u.ibss while in-use by u.ocb) due to a shared struct/union within ieee80211_sub_if_data: struct ieee80211_sub_if_data { ... union { struct ieee80211_if_ap ap; struct ieee80211_if_vlan vlan; struct ieee80211_if_managed mgd; struct ieee80211_if_ibss ibss; // <- shares address struct ieee80211_if_mesh mesh; struct ieee80211_if_ocb ocb; // <- shares address struct ieee80211_if_mntr mntr; struct ieee80211_if_nan nan; } u; ... } Therefore add handling of otype == NL80211_IFTYPE_OCB, during cfg80211_change_iface() to perform cleanup when leaving OCB mode. link to syzkaller bug: https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5 Reported-by: syzbot+105896fac213f26056f9@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11cfg80211: mitigate A-MSDU aggregation attacksMathy Vanhoef1-0/+3
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP) header, and if so dropping the complete A-MSDU frame. This mitigates known attacks, although new (unknown) aggregation-based attacks may remain possible. This defense works because in A-MSDU aggregation injection attacks, a normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042 header. In other words, the destination MAC address of the first A-MSDU subframe contains the start of an RFC1042 header during an aggregation attack. We can detect this and thereby prevent this specific attack. For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation". Note that for kernel 4.9 and above this patch depends on "mac80211: properly handle A-MSDUs that start with a rfc1042 header". Otherwise this patch has no impact and attacks will remain possible. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11mac80211: properly handle A-MSDUs that start with an RFC 1042 headerMathy Vanhoef1-2/+2
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042 header. This can occur in practice when the destination MAC address equals AA:AA:03:00:00:00. More importantly, this simplifies the next patch to mitigate A-MSDU injection attacks. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19cfg80211: constify ieee80211_get_response_rate returnJoe Perches1-1/+1
It's not modified so make it const with the eventual goal of moving data to text for various static struct ieee80211_rate arrays. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8b210b5f5972e39eded269b35a1297cf824c4181.camel@perches.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-2/+2
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: Add phyrate conversion support for extended MCS in 60GHz bandMax Chen1-0/+21
The current phyrate conversion does not include extended MCS and provides incorrect rates. Add a flag for extended MCS in DMG and add corresponding phyrate table for the correct conversions using base MCS in DMG specs. Signed-off-by: Max Chen <mxchen@codeaurora.org> Link: https://lore.kernel.org/r/1609977050-7089-2-git-send-email-mxchen@codeaurora.org [reduce data size, make a single WARN] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: add VHT rate entries for MCS-10 and MCS-11Arend van Spriel1-3/+11
Observed the warning in cfg80211_calculate_bitrate_vht() using an 11ac chip reporting MCS-11. Since devices reporting non-standard MCS-9 is already supported add similar entries for MCS-10 and MCS-11. Actually, the value of MCS-9@20MHz is slightly off so corrected that. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/20210105105839.3795-1-arend.vanspriel@broadcom.com [fix array size] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: validate key indexes for cfg80211_registered_deviceAnant Thazhemadam1-8/+43
syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ed94a115106fa9c6df94d09b2a6c5791c618c4f2.1605896059.git.gustavoars@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-11cfg80211: remove WDS codeJohannes Berg1-3/+2
Remove all the code that was there to configure WDS interfaces, now that there's no way to reach it anymore. Link: https://lore.kernel.org/r/20201109105103.8f5b98e4068d.I5f5129041649ef2862b69683574bb3344743727b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-06cfg80211: Add support to calculate and report 4096-QAM HE ratesVamsi Krishna1-15/+17
Drivers supporting 4096-QAM rates as a vendor extension in HE mode need to update the correct rate info to userspace while using 4096-QAM (MCS12 and MCS13) in HE mode. Add support to calculate bitrates of HE-MCS12 and HE-MCS13 which represent the 4096-QAM modulation schemes. The MCS12 and MCS13 bitrates are defined in IEEE P802.11be/D0.1. In addition, scale up the bitrates by 3*2048 in order to accommodate calculations for the new MCS12 and MCS13 rates without losing fraction values. Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20201029183457.7005-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18nl80211: support setting S1G channelsThomas Pedersen1-0/+27
S1G channels have a single width defined per frequency, so derive it from the channel flags with ieee80211_s1g_channel_width(). Also support setting an S1G channel where control frequency may differ from operating, and add some basic validation to ensure the control channel is with the operating. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: correctly validate S1G beacon headThomas Pedersen1-0/+5
The S1G beacon has a different header size than regular beacons, so adjust the beacon head validator. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: fix 6 GHz channel conversionJohannes Berg1-1/+1
We shouldn't accept any channels bigger than 233, fix that. Reported-by: Amar <asinghal@codeaurora.org> Fixes: d1a1646c0de7 ("cfg80211: adapt to new channelization of the 6GHz band") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200917115222.312ba6f1d461.I3a8c8fbcc3cc019814fd9cd0aced7eb591626136@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-3/+5
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-08-27cfg80211: Adjust 6 GHz frequency to channel conversionAmar Singhal1-3/+5
Adjust the 6 GHz frequency to channel conversion function, the other way around was previously handled. Signed-off-by: Amar Singhal <asinghal@codeaurora.org> Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org [rewrite commit message, hard-code channel 2] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long1-1/+1
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen1-0/+8
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31nl80211: really allow client-only BIGTK supportJohannes Berg1-1/+3
My previous commit here was wrong, it didn't check the new flag in two necessary places, so things didn't work. Fix that. Fixes: 155d7c733807 ("nl80211: allow client-only BIGTK support") Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: adapt to new channelization of the 6GHz bandArend Van Spriel1-2/+4
The 6GHz band does not have regulatory approval yet, but things are moving forward. However, that has led to a change in the channelization of the 6GHz band which has been accepted in the 11ax specification. It also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it. This change is primarily thrown in to discuss how to deal with it. I noticed ath11k adding 6G support with old channelization and ditto for iw. It probably involves changes in hostapd as well. Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Cc: Jouni Malinen <jouni@w1.fi> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: fix 6 GHz frequencies to kHzJohannes Berg1-1/+1
The updates to change to kHz frequencies and the 6 GHz additions evidently overlapped (or rather, I didn't see it when applying the latter), so the 6 GHz is broken. Fix this. Fixes: 934f4c7dd3a5 ("cfg80211: express channels with a KHz component") Link: https://lore.kernel.org/r/20200529140425.1bf824f6911b.I4a1174916b8f5965af4366999eb9ffc7a0347470@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: express channels with a KHz componentThomas Pedersen1-13/+19
Some bands (S1G) define channels centered on a non-integer MHz. Give ieee80211_channel and cfg80211_chan_def a freq_offset component where the final frequency can be expressed as: MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; Also provide some helper functions to do the frequency conversion and test for equality. Retain the existing interface to frequency and channel conversion helpers, and expose new ones which handle frequencies in units of KHz. Some internal functions (net/wireless/chan.c) pass around a frequency value. Convert these to units of KHz. mesh, ibss, wext, etc. are currently ignored. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: implement Operating Mode Notification extended NSS supportJohannes Berg1-12/+14
Somehow we missed this for a long time, but similar to the extended NSS support in VHT capabilities, we need to have this in Operating Mode notification. Implement it by * parsing the 160/80+80 bit there and setting the bandwidth appropriately * having callers of ieee80211_get_vht_max_nss() pass in the current max NSS value as received in the operating mode notification in order to modify it appropriately depending on the extended NSS bits. This updates all drivers that use it, i.e. only iwlwifi/mvm. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.098483728cfa.I4e8c25d3288441759c2793247197229f0696a37d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-24Merge tag 'mac80211-next-for-net-next-2020-02-24' of ↵David S. Miller1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A new set of changes: * lots of small documentation fixes, from Jérôme Pouiller * beacon protection (BIGTK) support from Jouni Malinen * some initial code for TID configuration, from Tamizh chelvam * I reverted some new API before it's actually used, because it's wrong to mix controlled port and preauth * a few other cleanups/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24cfg80211: Support key configuration for Beacon protection (BIGTK)Jouni Malinen1-1/+6
IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using a new set of keys (BIGTK; key index 6..7) similarly to the way group-addressed Robust Management frames are protected (IGTK; key index 4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be configured. Add an extended feature flag to indicate driver support for the new key index values to avoid array overflows in driver implementations and also to indicate to user space when this functionality is available. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-20net: use netif_is_bridge_port() to check for IFF_BRIDGE_PORTJulian Wiedmann1-1/+1
Trivial cleanup, so that all bridge port-specific code can be found in one go. CC: Johannes Berg <johannes@sipsolutions.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15cfg80211: fix page refcount issue in A-MSDU decapFelix Fietkau1-1/+1
The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow. Fixes: 2b67f944f88c ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200113182107.20461-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-30nl80211: Disallow setting of HT for channel 14Masashi Honma1-1/+2
This patch disables setting of HT20 and more for channel 14 because the channel is only for IEEE 802.11b. The patch for net/wireless/util.c was unit-tested. The patch for net/wireless/chan.c was tested with iw command. Before this patch. $ sudo iw dev <ifname> set channel 14 HT20 $ After this patch. $ sudo iw dev <ifname> set channel 14 HT20 kernel reports: invalid channel definition command failed: Invalid argument (-22) $ Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20191021075045.2719-1-masashi.honma@gmail.com [clean up the code, use != instead of equivalent >] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11Merge tag 'mac80211-next-for-davem-2019-09-11' of ↵David S. Miller1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a number of changes, but things are settling down: * a fix in the new 6 GHz channel support * a fix for recent minstrel (rate control) updates for an infinite loop * handle interface type changes better wrt. management frame registrations (for management frames sent to userspace) * add in-BSS RX time to survey information * handle HW rfkill properly if !CONFIG_RFKILL * send deauth on IBSS station expiry, to avoid state mismatches * handle deferred crypto tailroom updates in mac80211 better when device restart happens * fix a spectre-v1 - really a continuation of a previous patch * advertise NL80211_CMD_UPDATE_FT_IES as supported if so * add some missing parsing in VHT extended NSS support * support HE in mac80211_hwsim * let mac80211 drivers determine the max MTU themselves along with the usual cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-08 17:16:59 +0000