summaryrefslogtreecommitdiffstats
path: root/net/wireless/reg.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-01wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() failsChen Zhongjin1-1/+3
In regulatory_init_db(), when it's going to return a error, reg_pdev should be unregistered. When load_builtin_regdb_keys() fails it doesn't do it and makes cfg80211 can't be reload with report: sysfs: cannot create duplicate filename '/devices/platform/regulatory.0' ... <TASK> dump_stack_lvl+0x79/0x9b sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x22d/0x290 kobject_add_internal+0x247/0x800 kobject_add+0x135/0x1b0 device_add+0x389/0x1be0 platform_device_add+0x28f/0x790 platform_device_register_full+0x376/0x4b0 regulatory_init+0x9a/0x4b2 [cfg80211] cfg80211_init+0x84/0x113 [cfg80211] ... Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-21wifi: cfg80211: fix memory leak in query_regdb_file()Arend van Spriel1-3/+9
In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory. Fixes: 007f6c5e6eb4 ("cfg80211: support loading regulatory database as firmware file") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: get correct AP link chandefShaul Triebitz1-0/+4
When checking for channel regulatory validity, use the AP link chandef (and not mesh's chandef). Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg1-54/+85
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04cfg80211: declare MODULE_FIRMWARE for regulatory.dbDimitri John Ledkov1-0/+4
Add MODULE_FIRMWARE declarations for regulatory.db and regulatory.db.p7s such that userspace tooling can discover and include these files. Cc: stable@vger.kernel.org Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Link: https://lore.kernel.org/r/20220414125004.267819-1-dimitri.ledkov@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16nl80211: add support for 320MHz channel limitationSriram R1-0/+6
Add support to advertise drivers or regulatory limitations on 320 MHz channels to userspace. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-authored-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com> Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-6-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-3-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20cfg80211: Enable regulatory enforcement checks for drivers supporting mesh ifaceSriram R1-0/+2
Currently cfg80211 checks for invalid channels whenever there is a regulatory update and stops the active interfaces if it is operating on an unsupported channel in the new regulatory domain. This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF set during wiphy registration which disables this enforcement when unsupported interface modes are supported by driver. Add support to enable this enforcement when Mesh Point interface type is advertised by drivers. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14cfg80211: Acquire wiphy mutex on regulatory workIlan Peer1-1/+6
The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14nl80211: remove reload flag from regulatory_requestFinn Behrens1-4/+2
This removes the previously unused reload flag, which was introduced in 1eda919126b4. The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed unconditionally. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 1eda919126b4 ("nl80211: reset regdom when reloading regdb") Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/ Signed-off-by: Finn Behrens <me@kloenk.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-29nl80211: reset regdom when reloading regdbFinn Behrens1-2/+25
Reload the regdom when the regulatory db is reloaded. Otherwise, the user had to change the regulatoy domain to a different one and then reset it to the correct one to have a new regulatory db take effect after a reload. Signed-off-by: Finn Behrens <fin@nyantec.com> Link: https://lore.kernel.org/r/YaIIZfxHgqc/UTA7@gimli.kloenk.dev [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-26cfg80211: use wiphy DFS domain if it is self-managedSriram R1-1/+8
Currently during CAC start or other radar events, the DFS domain is fetched from cfg based on global DFS domain, even if the wiphy regdomain disagrees. But this could be different in case of self managed wiphy's in case the self managed driver updates its database or supports regions which has DFS domain set to UNSET in cfg80211 local regdomain. So for explicitly self-managed wiphys, just use their DFS domain. Signed-off-by: Sriram R <srirrama@codeaurora.org> Link: https://lore.kernel.org/r/1629934730-16388-1-git-send-email-srirrama@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: set custom regdomain after wiphy registrationMiri Korenblit1-0/+1
We used to set regulatory info before the registration of the device and then the regulatory info didn't get set, because the device isn't registered so there isn't a device to set the regulatory info for. So set the regulatory info after the device registration. Call reg_process_self_managed_hints() once again after the device registration because it does nothing before it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c96eadcffe80.I86799c2c866b5610b4cf91115c21d8ceb525c5aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: reg: improve bad regulatory warningJohannes Berg1-1/+3
There's a WARN_ON here but it says nothing, and the later dump of the regdomain aren't usually printed. As a first step, include the regdomain code in the WARN_ON message, just like in other similar instances. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.853ffdd6c62b.I63e37b2ab184ee3653686e4df4dd23eb303687d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08cfg80211: regulatory: use DEFINE_SPINLOCK() for spinlockQiheng Lin1-7/+3
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20210325143854.13186-1-linqiheng@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-28reg.c: Fix a spelloBhaskar Chowdhury1-1/+1
s/ingoring/ignoring/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12cfg80211: initialize reg_rule in __freq_reg_info()Luca Coelho1-1/+1
Sparse started warning on this function because we can potentially return an uninitialized value. The reason is that if the caller passes a min_bw value that is higher then the last value in bws[], we will not go into the loop and reg_rule will remain initialized. This cannot happen because the only caller of this function uses either 1 or 20 in min_bw, but the function will be more robust if we pre-initialize the value. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-30/+61
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-08cfg80211: Save the regulatory domain with a lockIlan Peer1-1/+10
Saving the regulatory domain while setting custom regulatory domain was done while accessing a RCU protected pointer but without any protection. Fix this by using RTNL while accessing the pointer. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: syzbot+27771d4abcd9b7a1f5d3@syzkaller.appspotmail.com Reported-by: syzbot+db4035751c56c0079282@syzkaller.appspotmail.com Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: beee24695157 ("cfg80211: Save the regulatory domain when setting custom regulatory") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210105165657.613e9a876829.Ia38d27dbebea28bf9c56d70691d243186ede70e7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Save the regulatory domain when setting custom regulatoryIlan Peer1-0/+8
When custom regulatory was set, only the channels setting was updated, but the regulatory domain was not saved. Fix it by saving it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.290fa5c5568a.Ic5732aa64de6ee97ae3578bd5779fc723ba489d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11net: wireless: make a const array static, makes object smallerColin Ian King1-1/+1
Don't populate the const array bws on the stack but instead it static. Makes the object code smaller by 80 bytes: Before: text data bss dec hex filename 85694 16865 1216 103775 1955f ./net/wireless/reg.o After: text data bss dec hex filename 85518 16961 1216 103695 1950f ./net/wireless/reg.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201116181636.362729-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30cfg80211: regulatory: Fix inconsistent format argumentYe Bin1-1/+1
Fix follow warning: [net/wireless/reg.c:3619]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int'. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: regulatory: remove a bogus initializationDan Carpenter1-1/+1
The the __freq_reg_info() never returns NULL and the callers don't check for NULL. This initialization to set "reg_rule = NULL;" is just there to make GCC happy but it's not required in current GCCs. The problem is that Smatch sees the initialization and concludes that this function can return NULL so it complains that the callers are not checking for it. Smatch used to be able to parse this correctly but we recently changed the code from: - for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) { + for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) { Originally Smatch used to understand that this code always iterates through the loop once, but the change from "MHZ_TO_KHZ(20)" to "MHZ_TO_KHZ(bws[i])" is too complicated for Smatch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200923084203.GC1454948@mwanda Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: regulatory: handle S1G channelsThomas Pedersen1-12/+58
S1G channels have a minimum bandwidth of 1Mhz, and there is a 1:1 mapping of allowed bandwidth to channel number. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-27cfg80211: add helper fn for adjacent rule channelsMarkus Theil1-11/+158
Some usable channels are located in the union of adjacent regulatory rules, for example channel 144 in Germany. Enable them, by also checking if a channel spans two adjacent regulatory rules/frequency ranges. All flags involved are disabling things, therefore we can build the maximum by or-ing them together. Furthermore, take the maximum of DFS CAC time values and the minimum of allowed power of both adjacent channels in order to comply with both regulatory rules at the same time. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200803144353.305538-2-markus.theil@tu-ilmenau.de [remove unrelated comment changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27cfg80211: add helper fn for single rule channelsMarkus Theil1-47/+59
As a preparation to handle adjacent rule channels, factor out handling channels located in a single regulatory rule. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200803144353.305538-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: wireless: reg.c: delete duplicated words + fix punctuationRandy Dunlap1-2/+2
Drop duplicated words "was" and "does". Fix "let's" apostrophe. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-5-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27cfg80211: regulatory: reject invalid hintsJohannes Berg1-0/+3
Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-13net: wireless: kerneldoc fixesAndrew Lunn1-1/+3
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24cfg80211: express channels with a KHz componentThomas Pedersen1-19/+21
Some bands (S1G) define channels centered on a non-integer MHz. Give ieee80211_channel and cfg80211_chan_def a freq_offset component where the final frequency can be expressed as: MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; Also provide some helper functions to do the frequency conversion and test for equality. Retain the existing interface to frequency and channel conversion helpers, and expose new ones which handle frequencies in units of KHz. Some internal functions (net/wireless/chan.c) pass around a frequency value. Convert these to units of KHz. mesh, ibss, wext, etc. are currently ignored. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21cfg80211: check reg_rule for NULL in handle_channel_custom()Johannes Berg1-1/+1
We may end up with a NULL reg_rule after the loop in handle_channel_custom() if the bandwidth didn't fit, check if this is the case and bail out if so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200221104449.3b558a50201c.I4ad3725c4dacaefd2d18d3cc65ba6d18acd5dbfe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-16Merge tag 'mac80211-next-for-net-next-2020-02-14' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few big new things: * 802.11 frame encapsulation offload support * more HE (802.11ax) support, including some for 6 GHz band * powersave in hwsim, for better testing Of course as usual there are various cleanups and small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07cfg80211: add no HE indication to the channel flagHaim Dreyfuss1-0/+2
The regulatory domain might forbid HE operation. Certain regulatory domains may restrict it for specific channels whereas others may do it for the whole regulatory domain. Add an option to indicate it in the channel flag. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: Fix radar event during another phy CACOrr Mazor1-1/+22
In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15wireless: fix enabling channel 12 for custom regulatory domainGanapathi Bhat1-3/+10
Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"") fixed a broken regulatory (leaving channel 12 open for AP where not permitted). Apply a similar fix to custom regulatory domain processing. Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com [reword commit message, fix coding style, add a comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07mac80211: fix scan when operating on DFS channels in ETSI domainsAaron Komisar1-0/+1
In non-ETSI regulatory domains scan is blocked when operating channel is a DFS channel. For ETSI, however, once DFS channel is marked as available after the CAC, this channel will remain available (for some time) even after leaving this channel. Therefore a scan can be done without any impact on the availability of the DFS channel as no new CAC is required after the scan. Enable scan in mac80211 in these cases. Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com> Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01cfg80211: initialize on-stack chandefsJohannes Berg1-1/+1
In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21cfg80211: add 6GHz UNII band definitionsArend van Spriel1-2/+19
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdf Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-3-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21Revert "cfg80211: fix processing world regdomain when non modular"Hodaszi, Robert1-1/+1
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-10Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells1-4/+2
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+2
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26Merge tag 'mac80211-next-for-davem-2019-04-26' of ↵David S. Miller1-16/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26cfg80211: Use struct_size() in kzalloc()Gustavo A. R. Silva1-16/+7
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size_of_regd is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-23cfg80211: Notify previous user request during self managed wiphy registrationSriram R1-3/+2
Commit c82c06ce43d3("cfg80211: Notify all User Hints To self managed wiphys") notified all new user hints to self managed wiphy's after device registration. But it didn't do this for anything other than cell base hints done before registration. This needs to be done during wiphy registration of a self managed device also, so that the previous user settings are retained. Fixes: c82c06ce43d3 ("cfg80211: Notify all User Hints To self managed wiphys") Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29cfg80211: Handle WMM rules in regulatory domain intersectionIlan Peer1-0/+39
The support added for regulatory WMM rules did not handle the case of regulatory domain intersections. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11cfg80211: restore regulatory without calling userspaceJohannes Berg1-15/+58
Jouni reports that in some cases it is possible that getting disconnected (or stopping AP, after previous patches) results in further operations hitting the window within the regulatory core restoring the regdomain to the defaults. The reason for this is that we have to call out to CRDA or otherwise do some asynchronous work, and thus can't do the restore atomically. However, we've previously seen all the data we need to do the restore, so we can hang on to that data and use it later for the restore. This makes the whole thing happen within a single locked section and thus atomic. However, we can't *always* do this - there are unfortunately cases where the restore needs to re-request, because this is also used (abused?) as an error recovery process, so make the new behaviour optional and only use it when doing a regular restore as described above. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-18 14:57:35 +0000