summaryrefslogtreecommitdiffstats
path: root/net/smc
AgeCommit message (Collapse)AuthorFilesLines
2022-11-25use less confusing names for iov_iter direction initializersAl Viro2-4/+4
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-02net/smc: Fix possible leaked pernet namespace in smc_init()Chen Zhongjin1-2/+4
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ... Fixes: 194730a9beb5 ("net/smc: Make SMC statistics network namespace aware") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-15net/smc: Fix an error code in smc_lgr_create()Dan Carpenter1-1/+2
If smc_wr_alloc_lgr_mem() fails then return an error code. Don't return success. Fixes: 8799e310fb3f ("net/smc: add v2 support to the work request layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-27net/smc: Support SO_REUSEPORTTony Lu1-0/+1
This enables SO_REUSEPORT [1] for clcsock when it is set on smc socket, so that some applications which uses it can be transparently replaced with SMC. Also, this helps improve load distribution. Here is a simple test of NGINX + wrk with SMC. The CPU usage is collected on NGINX (server) side as below. Disable SO_REUSEPORT: 05:15:33 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 05:15:34 PM all 7.02 0.00 11.86 0.00 2.04 8.93 0.00 0.00 0.00 70.15 05:15:34 PM 0 0.00 0.00 0.00 0.00 16.00 70.00 0.00 0.00 0.00 14.00 05:15:34 PM 1 11.58 0.00 22.11 0.00 0.00 0.00 0.00 0.00 0.00 66.32 05:15:34 PM 2 1.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 98.00 05:15:34 PM 3 16.84 0.00 30.53 0.00 0.00 0.00 0.00 0.00 0.00 52.63 05:15:34 PM 4 28.72 0.00 44.68 0.00 0.00 0.00 0.00 0.00 0.00 26.60 05:15:34 PM 5 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 05:15:34 PM 6 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 05:15:34 PM 7 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Enable SO_REUSEPORT: 05:15:20 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 05:15:21 PM all 8.56 0.00 14.40 0.00 2.20 9.86 0.00 0.00 0.00 64.98 05:15:21 PM 0 0.00 0.00 4.08 0.00 14.29 76.53 0.00 0.00 0.00 5.10 05:15:21 PM 1 9.09 0.00 16.16 0.00 1.01 0.00 0.00 0.00 0.00 73.74 05:15:21 PM 2 9.38 0.00 16.67 0.00 1.04 0.00 0.00 0.00 0.00 72.92 05:15:21 PM 3 10.42 0.00 17.71 0.00 1.04 0.00 0.00 0.00 0.00 70.83 05:15:21 PM 4 9.57 0.00 15.96 0.00 0.00 0.00 0.00 0.00 0.00 74.47 05:15:21 PM 5 9.18 0.00 15.31 0.00 0.00 1.02 0.00 0.00 0.00 74.49 05:15:21 PM 6 8.60 0.00 15.05 0.00 0.00 0.00 0.00 0.00 0.00 76.34 05:15:21 PM 7 12.37 0.00 14.43 0.00 0.00 0.00 0.00 0.00 0.00 73.20 Using SO_REUSEPORT helps the load distribution of NGINX be more balanced. [1] https://man7.org/linux/man-pages/man7/socket.7.html Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20220922121906.72406-1-tonylu@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+4
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22net/smc: Unbind r/w buffer size from clcsock and make them tunableTony Lu3-7/+27
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem in clcsock. The buffer size from TCP socket doesn't fit SMC well. Generally, buffers are usually larger than TCP for SMC-R/-D to get higher performance, for they are different underlay devices and paths. So this patch unbinds buffer size from TCP, and introduces two sysctl knobs to tune them independently. Also, these knobs are per net namespace and work for containers. Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net/smc: Introduce a specific sysctl for TEST_LINK timeWen Gu3-1/+11
SMC-R tests the viability of link by sending out TEST_LINK LLC messages over RoCE fabric when connections on link have been idle for a time longer than keepalive interval (testlink time). But using tcp_keepalive_time as testlink time maybe not quite suitable because it is default no less than two hours[1], which is too long for single link to find peer dead. The active host will still use peer-dead link (QP) sending messages, and can't find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally. So this patch introduces a independent sysctl for SMC-R to set link keepalive time, in order to detect link down in time. The default value is 30 seconds. [1] https://www.rfc-editor.org/rfc/rfc1122#page-101 Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net/smc: Stop the CLC flow if no link to map buffers onWen Gu1-1/+4
There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544c1bc ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni4-0/+13
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-07net/smc: Fix possible access to freed memory in link clearYacan Liu4-0/+13
After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57718cc ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+0
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01net/smc: Remove redundant refcount increaseYacan Liu1-1/+0
For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski2-2/+4
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net/smc: Enable module load on netlink usageStefan Raspl2-0/+2
Previously, the smc and smc_diag modules were automatically loaded as dependencies of the ism module whenever an ISM device was present. With the pending rework of the ISM API, the smc module will no longer automatically be loaded in presence of an ISM device. Usage of an AF_SMC socket will still trigger loading of the smc modules, but usage of a netlink socket will not. This is addressed by setting the correct module aliases. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net/smc: Pass on DMBE bit mask in IRQ handlerStefan Raspl1-3/+3
Make the DMBE bits, which are passed on individually in ism_move() as parameter idx, available to the receiver. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27s390/ism: CleanupsStefan Raspl1-1/+1
Reworked signature of the function to retrieve the system EID: No plausible reason to use a double pointer. And neither to pass in the device as an argument, as this identifier is by definition per system, not per device. Plus some minor consistency edits. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net/smc: Eliminate struct smc_ism_positionHeiko Carstens3-27/+14
This struct is used in a single place only, and its usage generates inefficient code. Time to clean up! Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-and-tested-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18tcp: Fix data-races around keepalive sysctl knobs.Kuniyuki Iwashima1-1/+1
While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: Extend SMC-R link group netlink attributeWen Gu1-0/+2
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR. Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of SMC-R link group. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: Allow virtually contiguous sndbufs or RMBs for SMC-RWen Gu9-118/+328
On long-running enterprise production servers, high-order contiguous memory pages are usually very rare and in most cases we can only get fragmented pages. When replacing TCP with SMC-R in such production scenarios, attempting to allocate high-order physically contiguous sndbufs and RMBs may result in frequent memory compaction, which will cause unexpected hung issue and further stability risks. So this patch is aimed to allow SMC-R link group to use virtually contiguous sndbufs and RMBs to avoid potential issues mentioned above. Whether to use physically or virtually contiguous buffers can be set by sysctl smcr_buf_type. Note that using virtually contiguous buffers will bring an acceptable performance regression, which can be mainly divided into two parts: 1) regression in data path, which is brought by additional address translation of sndbuf by RNIC in Tx. But in general, translating address through MTT is fast. Taking 256KB sndbuf and RMB as an example, the comparisons in qperf latency and bandwidth test with physically and virtually contiguous buffers are as follows: - client: smc_run taskset -c <cpu> qperf <server> -oo msg_size:1:64K:*2\ -t 5 -vu tcp_{bw|lat} - server: smc_run taskset -c <cpu> qperf [latency] msgsize tcp smcr smcr-use-virt-buf 1 11.17 us 7.56 us 7.51 us (-0.67%) 2 10.65 us 7.74 us 7.56 us (-2.31%) 4 11.11 us 7.52 us 7.59 us ( 0.84%) 8 10.83 us 7.55 us 7.51 us (-0.48%) 16 11.21 us 7.46 us 7.51 us ( 0.71%) 32 10.65 us 7.53 us 7.58 us ( 0.61%) 64 10.95 us 7.74 us 7.80 us ( 0.76%) 128 11.14 us 7.83 us 7.87 us ( 0.47%) 256 10.97 us 7.94 us 7.92 us (-0.28%) 512 11.23 us 7.94 us 8.20 us ( 3.25%) 1024 11.60 us 8.12 us 8.20 us ( 0.96%) 2048 14.04 us 8.30 us 8.51 us ( 2.49%) 4096 16.88 us 9.13 us 9.07 us (-0.64%) 8192 22.50 us 10.56 us 11.22 us ( 6.26%) 16384 28.99 us 12.88 us 13.83 us ( 7.37%) 32768 40.13 us 16.76 us 16.95 us ( 1.16%) 65536 68.70 us 24.68 us 24.85 us ( 0.68%) [bandwidth] msgsize tcp smcr smcr-use-virt-buf 1 1.65 MB/s 1.59 MB/s 1.53 MB/s (-3.88%) 2 3.32 MB/s 3.17 MB/s 3.08 MB/s (-2.67%) 4 6.66 MB/s 6.33 MB/s 6.09 MB/s (-3.85%) 8 13.67 MB/s 13.45 MB/s 11.97 MB/s (-10.99%) 16 25.36 MB/s 27.15 MB/s 24.16 MB/s (-11.01%) 32 48.22 MB/s 54.24 MB/s 49.41 MB/s (-8.89%) 64 106.79 MB/s 107.32 MB/s 99.05 MB/s (-7.71%) 128 210.21 MB/s 202.46 MB/s 201.02 MB/s (-0.71%) 256 400.81 MB/s 416.81 MB/s 393.52 MB/s (-5.59%) 512 746.49 MB/s 834.12 MB/s 809.99 MB/s (-2.89%) 1024 1292.33 MB/s 1641.96 MB/s 1571.82 MB/s (-4.27%) 2048 2007.64 MB/s 2760.44 MB/s 2717.68 MB/s (-1.55%) 4096 2665.17 MB/s 4157.44 MB/s 4070.76 MB/s (-2.09%) 8192 3159.72 MB/s 4361.57 MB/s 4270.65 MB/s (-2.08%) 16384 4186.70 MB/s 4574.13 MB/s 4501.17 MB/s (-1.60%) 32768 4093.21 MB/s 4487.42 MB/s 4322.43 MB/s (-3.68%) 65536 4057.14 MB/s 4735.61 MB/s 4555.17 MB/s (-3.81%) 2) regression in buffer initialization and destruction path, which is brought by additional MR operations of sndbufs. But thanks to link group buffer reuse mechanism, the impact of this kind of regression decreases as times of buffer reuse increases. Taking 256KB sndbuf and RMB as an example, latency of some key SMC-R buffer-related function obtained by bpftrace are as follows: Function Phys-bufs Virt-bufs smcr_new_buf_create() 67154 ns 79164 ns smc_ib_buf_map_sg() 525 ns 928 ns smc_ib_get_memory_region() 162294 ns 161191 ns smc_wr_reg_send() 9957 ns 9635 ns smc_ib_put_memory_region() 203548 ns 198374 ns smc_ib_buf_unmap_sg() 508 ns 1158 ns ------------ Test environment notes: 1. Above tests run on 2 VMs within the same Host. 2. The NIC is ConnectX-4Lx, using SRIOV and passing through 2 VFs to the each VM respectively. 3. VMs' vCPUs are binded to different physical CPUs, and the binded physical CPUs are isolated by `isolcpus=xxx` cmdline. 4. NICs' queue number are set to 1. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: Use sysctl-specified types of buffers in new link groupWen Gu2-0/+2
This patch introduces a new SMC-R specific element buf_type in struct smc_link_group, for recording the value of sysctl smcr_buf_type when link group is created. New created link group will create and reuse buffers of the type specified by buf_type. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: Introduce a sysctl for setting SMC-R buffer typeWen Gu2-0/+17
This patch introduces the sysctl smcr_buf_type for setting the type of SMC-R sndbufs and RMBs. Valid values includes: - SMCR_PHYS_CONT_BUFS, which means use physically contiguous buffers for better performance and is the default value. - SMCR_VIRT_CONT_BUFS, which means use virtually contiguous buffers in case of physically contiguous memory is scarce. - SMCR_MIXED_BUFS, which means first try to use physically contiguous buffers. If not available, then use virtually contiguous buffers. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpuGuangguan Wang4-0/+40
Some CPU, such as Xeon, can guarantee DMA cache coherency. So it is no need to use dma sync APIs to flush cache on such CPUs. In order to avoid calling dma sync APIs on the IO path, use the dma_need_sync to check whether smc_buf_desc needs dma sync when creating smc_buf_desc. Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net/smc: remove redundant dma sync opsGuangguan Wang5-29/+0
smc_ib_sync_sg_for_cpu/device are the ops used for dma memory cache consistency. Smc sndbufs are dma buffers, where CPU writes data to it and PCIE device reads data from it. So for sndbufs, smc_ib_sync_sg_for_device is needed and smc_ib_sync_sg_for_cpu is redundant as PCIE device will not write the buffers. Smc rmbs are dma buffers, where PCIE device write data to it and CPU read data from it. So for rmbs, smc_ib_sync_sg_for_cpu is needed and smc_ib_sync_sg_for_device is redundant as CPU will not write the buffers. Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-09net: rename reference+tracking helpersJakub Kicinski1-3/+4
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-28net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct ↵Guangguan Wang1-1/+1
smc_wr_tx_pend_priv *" "struct smc_cdc_tx_pend **" can not directly convert to "struct smc_wr_tx_pend_priv *". Fixes: 2bced6aefa3d ("net/smc: put slot when connection is killed") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-25net/smc: set ini->smcrv2.ib_dev_v2 to NULL if SMC-Rv2 is unavailableliuyacan1-0/+1
In the process of checking whether RDMAv2 is available, the current implementation first sets ini->smcrv2.ib_dev_v2, and then allocates smc buf desc and register rmb, but the latter may fail. In this case, the pointer should be reset. Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220525085408.812273-1-liuyacan@corp.netease.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-24Revert "net/smc: fix listen processing for SMC-Rv2"liuyacan1-27/+17
This reverts commit 8c3b8dc5cc9bf6d273ebe18b16e2d6882bcfb36d. Some rollback issue will be fixed in other patches in the future. Link: https://lore.kernel.org/all/20220523055056.2078994-1-liuyacan@corp.netease.com/ Fixes: 8c3b8dc5cc9b ("net/smc: fix listen processing for SMC-Rv2") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Link: https://lore.kernel.org/r/20220524090230.2140302-1-liuyacan@corp.netease.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+28
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23net/smc: fix listen processing for SMC-Rv2liuyacan1-17/+27
In the process of checking whether RDMAv2 is available, the current implementation first sets ini->smcrv2.ib_dev_v2, and then allocates smc buf desc, but the latter may fail. Unfortunately, the caller will only check the former. In this case, a NULL pointer reference will occur in smc_clc_send_confirm_accept() when accessing conn->rmb_desc. This patch does two things: 1. Use the return code to determine whether V2 is available. 2. If the return code is NODEV, continue to check whether V1 is available. Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23net/smc: postpone sk_refcnt increment in connect()liuyacan1-1/+1
Same trigger condition as commit 86434744. When setsockopt runs in parallel to a connect(), and switch the socket into fallback mode. Then the sk_refcnt is incremented in smc_connect(), but its state stay in SMC_INIT (NOT SMC_ACTIVE). This cause the corresponding sk_refcnt decrement in __smc_release() will not be performed. Fixes: 86434744fedf ("net/smc: add fallback check to connect()") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-17net/smc: rdma write inline if qp has sufficient inline spaceGuangguan Wang1-5/+12
Rdma write with inline flag when sending small packages, whose length is shorter than the qp's max_inline_data, can help reducing latency. In my test environment, which are 2 VMs running on the same physical host and whose NICs(ConnectX-4Lx) are working on SR-IOV mode, qperf shows 0.5us-0.7us improvement in latency. Test command: server: smc_run taskset -c 1 qperf client: smc_run taskset -c 1 qperf <server ip> -oo \ msg_size:1:2K:*2 -t 30 -vu tcp_lat The results shown below: msgsize before after 1B 11.2 us 10.6 us (-0.6 us) 2B 11.2 us 10.7 us (-0.5 us) 4B 11.3 us 10.7 us (-0.6 us) 8B 11.2 us 10.6 us (-0.6 us) 16B 11.3 us 10.7 us (-0.6 us) 32B 11.3 us 10.6 us (-0.7 us) 64B 11.2 us 11.2 us (0 us) 128B 11.2 us 11.2 us (0 us) 256B 11.2 us 11.2 us (0 us) 512B 11.4 us 11.3 us (-0.1 us) 1KB 11.4 us 11.5 us (0.1 us) 2KB 11.5 us 11.5 us (0 us) Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Tested-by: kernel test robot <lkp@intel.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net/smc: send cdc msg inline if qp has sufficient inline spaceGuangguan Wang2-1/+5
As cdc msg's length is 44B, cdc msgs can be sent inline in most rdma devices, which can help reducing sending latency. In my test environment, which are 2 VMs running on the same physical host and whose NICs(ConnectX-4Lx) are working on SR-IOV mode, qperf shows 0.4us-0.7us improvement in latency. Test command: server: smc_run taskset -c 1 qperf client: smc_run taskset -c 1 qperf <server ip> -oo \ msg_size:1:2K:*2 -t 30 -vu tcp_lat The results shown below: msgsize before after 1B 11.9 us 11.2 us (-0.7 us) 2B 11.7 us 11.2 us (-0.5 us) 4B 11.7 us 11.3 us (-0.4 us) 8B 11.6 us 11.2 us (-0.4 us) 16B 11.7 us 11.3 us (-0.4 us) 32B 11.7 us 11.3 us (-0.4 us) 64B 11.7 us 11.2 us (-0.5 us) 128B 11.6 us 11.2 us (-0.4 us) 256B 11.8 us 11.2 us (-0.6 us) 512B 11.8 us 11.4 us (-0.4 us) 1KB 11.9 us 11.4 us (-0.5 us) 2KB 12.1 us 11.5 us (-0.6 us) Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Tested-by: kernel test robot <lkp@intel.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net/smc: align the connect behaviour with TCPGuangguan Wang1-4/+46
Connect with O_NONBLOCK will not be completed immediately and returns -EINPROGRESS. It is possible to use selector/poll for completion by selecting the socket for writing. After select indicates writability, a second connect function call will return 0 to indicate connected successfully as TCP does, but smc returns -EISCONN. Use socket state for smc to indicate connect state, which can help smc aligning the connect behaviour with TCP. Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-12net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pendingGuangguan Wang1-2/+2
Non blocking sendmsg will return -EAGAIN when any signal pending and no send space left, while non blocking recvmsg return -EINTR when signal pending and no data received. This may makes confused. As TCP returns -EAGAIN in the conditions described above. Align the behavior of smc with TCP. Fixes: 846e344eb722 ("net/smc: add receive timeout check") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25net/smc: Fix slab-out-of-bounds issue in fallbackWen Gu2-23/+59
syzbot reported a slab-out-of-bounds/use-after-free issue, which was caused by accessing an already freed smc sock in fallback-specific callback functions of clcsock. This patch fixes the issue by restoring fallback-specific callback functions to original ones and resetting clcsock sk_user_data to NULL before freeing smc sock. Meanwhile, this patch introduces sk_callback_lock to make the access and assignment to sk_user_data mutually exclusive. Reported-by: syzbot+b425899ed22c6943e00b@syzkaller.appspotmail.com Fixes: 341adeec9ada ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25net/smc: Only save the original clcsock callback functionsWen Gu3-20/+67
Both listen and fallback process will save the current clcsock callback functions and establish new ones. But if both of them happen, the saved callback functions will be overwritten. So this patch introduces some helpers to ensure that only save the original callback functions of clcsock. Fixes: 341adeec9ada ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25net/smc: sync err code when tcp connection was refusedliuyacan1-0/+2
In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely. Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net/smc: Fix sock leak when release after smc_shutdown()Tony Lu1-1/+3
Since commit e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback"), for a fallback connection, __smc_release() does not call sock_put() if its state is already SMC_CLOSED. When calling smc_shutdown() after falling back, its state is set to SMC_CLOSED but does not call sock_put(), so this patch calls it. Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com Fixes: e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net/smc: Fix af_ops of child socket pointing to released memoryKarsten Graul1-2/+12
Child sockets may inherit the af_ops from the parent listen socket. When the listen socket is released then the af_ops of the child socket points to released memory. Solve that by restoring the original af_ops for child sockets which inherited the parent af_ops. And clear any inherited user_data of the parent socket. Fixes: 8270d9c21041 ("net/smc: Limit backlog connections") Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()Karsten Graul1-2/+3
dev_name() was called with dev.parent as argument but without to NULL-check it before. Solve this by checking the pointer before the call to dev_name(). Fixes: af5f60c7e3d5 ("net/smc: allow PCI IDs as ib device names in the pnet table") Reported-by: syzbot+03e3e228510223dabd34@syzkaller.appspotmail.com Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net/smc: use memcpy instead of snprintf to avoid out of bounds readKarsten Graul1-2/+4
Using snprintf() to convert not null-terminated strings to null terminated strings may cause out of bounds read in the source string. Therefore use memcpy() and terminate the target string with a null afterwards. Fixes: fa0866625543 ("net/smc: add support for user defined EIDs") Fixes: 3c572145c24e ("net/smc: add generic netlink support for system EID") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-28net/smc: Send out the remaining data in sndbuf before closeWen Gu1-0/+3
The current autocork algorithms will delay the data transmission in BH context to smc_release_cb() when sock_lock is hold by user. So there is a possibility that when connection is being actively closed (sock_lock is hold by user now), some corked data still remains in sndbuf, waiting to be sent by smc_release_cb(). This will cause: - smc_close_stream_wait(), which is called under the sock_lock, has a high probability of timeout because data transmission is delayed until sock_lock is released. - Unexpected data sends may happen after connction closed and use the rtoken which has been deleted by remote peer through LLC_DELETE_RKEY messages. So this patch will try to send out the remaining corked data in sndbuf before active close process, to ensure data integrity and avoid unexpected data transmission after close. Reported-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Fixes: 6b88af839d20 ("net/smc: don't send in the BH context if sock_owned_by_user") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/1648447836-111521-1-git-send-email-guwen@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-26net/smc: fix a memory leak in smc_sysctl_net_exit()Eric Dumazet1-0/+5
Recently added smc_sysctl_net_exit() forgot to free the memory allocated from smc_sysctl_net_init() for non initial network namespace. Fixes: 462791bbfa35 ("net/smc: add sysctl interface for SMC") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Tony Lu <tonylu@linux.alibaba.com> Cc: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net/smc: fix -Wmissing-prototypes warning when CONFIG_SYSCTL not setDust Li1-2/+2
when CONFIG_SYSCTL not set, smc_sysctl_net_init/exit need to be static inline to avoid missing-prototypes if compile with W=1. Since __net_exit has noinline annotation when CONFIG_NET_NS not set, it should not be used with static inline. So remove the __net_init/exit when CONFIG_SYSCTL not set. Fixes: 7de8eb0d9039 ("net/smc: fix compile warning for smc_sysctl") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Link: https://lore.kernel.org/r/20220309033051.41893-1-dust.li@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07net/smc: fix compile warning for smc_sysctlDust Li4-31/+15
kernel test robot reports multiple warning for smc_sysctl: In file included from net/smc/smc_sysctl.c:17: >> net/smc/smc_sysctl.h:23:5: warning: no previous prototype \ for function 'smc_sysctl_init' [-Wmissing-prototypes] int smc_sysctl_init(void) ^ and >> WARNING: modpost: vmlinux.o(.text+0x12ced2d): Section mismatch \ in reference from the function smc_sysctl_exit() to the variable .init.data:smc_sysctl_ops The function smc_sysctl_exit() references the variable __initdata smc_sysctl_ops. This is often because smc_sysctl_exit lacks a __initdata annotation or the annotation of smc_sysctl_ops is wrong. and net/smc/smc_sysctl.c: In function 'smc_sysctl_init_net': net/smc/smc_sysctl.c:47:17: error: 'struct netns_smc' has no member named 'smc_hdr' 47 | net->smc.smc_hdr = register_net_sysctl(net, "net/smc", table); Since we don't need global sysctl initialization. To make things clean and simple, remove the global pernet_operations and smc_sysctl_{init|exit}. Call smc_sysctl_net_{init|exit} directly from smc_net_{init|exit}. Also initialized sysctl_autocorking_size if CONFIG_SYSCTL it not set, this make sure SMC autocorking is enabled by default if CONFIG_SYSCTL is not set. Fixes: 462791bbfa35 ("net/smc: add sysctl interface for SMC") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06Revert "net/smc: don't req_notify until all CQEs drained"Dust Li1-28/+21
This reverts commit a505cce6f7cfaf2aa2385aab7286063c96444526. Leon says: We already discussed that. SMC should be changed to use RDMA CQ pool API drivers/infiniband/core/cq.c. ib_poll_handler() has much better implementation (tracing, IRQ rescheduling, proper error handling) than this SMC variant. Since we will switch to ib_poll_handler() in the future, revert this patch. Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/ Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+14
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by serverD. Wythe1-1/+2
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear. Based on the fact that whether a new SMC connection can be accepted or not depends on not only the limit of conn nums, but also the available entries of rtoken. Since the rtoken release is trigger by peer, while the conn nums is decrease by local, tons of thing can happen in this time difference. This only thing that needs to be mentioned is that now all connection creations are completely protected by smc_server_lgr_pending lock, it's enough to check only the available entries in rtokens_used_mask. Fixes: cd6851f30386 ("smc: remote memory buffers (RMBs)") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-19 08:25:59 +0000