summaryrefslogtreecommitdiffstats
path: root/lib/zlib_dfltcc
AgeCommit message (Collapse)AuthorFilesLines
2020-12-29zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.cRandy Dunlap4-19/+9
In commit 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that these should probably be in dfltcc_syms.c with the other EXPORT_SYMBOL()s. However, that is contrary to the current kernel style, which places EXPORT_SYMBOL() immediately after the function that it applies to, so move all EXPORT_SYMBOL()s to their respective function locations and drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the deleted file to dfltcc.c. [rdunlap@infradead.org: remove dfltcc_syms.o from Makefile] Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org Fixes: 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29lib/zlib: fix inflating zlib streams on s390Ilya Leoshkevich1-2/+2
Decompressing zlib streams on s390 fails with "incorrect data check" error. Userspace zlib checks inflate_state.flags in order to byteswap checksums only for zlib streams, and s390 hardware inflate code, which was ported from there, tries to match this behavior. At the same time, kernel zlib does not use inflate_state.flags, so it contains essentially random values. For many use cases either zlib stream is zeroed out or checksum is not used, so this problem is masked, but at least SquashFS is still affected. Fix by always passing a checksum to and from the hardware as is, which matches zlib_inflate()'s expectations. Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06zlib: export S390 symbols for zlib modulesRandy Dunlap1-0/+3
Fix build errors when ZLIB_INFLATE=m and ZLIB_DEFLATE=m and ZLIB_DFLTCC=y by exporting the 2 needed symbols in dfltcc_inflate.c. Fixes these build errors: ERROR: modpost: "dfltcc_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined! ERROR: modpost: "dfltcc_can_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined! Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lkml.kernel.org/r/20201123191712.4882-1-rdunlap@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31lib/zlib: add zlib_deflate_dfltcc_enabled() functionMikhail Zaslonko2-9/+11
Add a new function to zlib.h checking if s390 Deflate-Conversion facility is installed and enabled. Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31s390/boot: add dfltcc= kernel command line parameterMikhail Zaslonko5-2/+20
Add the new kernel command line parameter 'dfltcc=' to configure s390 zlib hardware support. Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31lib/zlib: add s390 hardware support for kernel zlib_inflateMikhail Zaslonko3-1/+172
Add decompression functions to zlib_dfltcc library. Update zlib_inflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware inflate decompression. Link: http://lkml.kernel.org/r/20200103223334.20669-4-zaslonko@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31lib/zlib: add s390 hardware support for kernel zlib_deflateMikhail Zaslonko6-0/+578
Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>