summaryrefslogtreecommitdiffstats
path: root/include/net/gre.h
AgeCommit message (Collapse)AuthorFilesLines
2021-01-29ip_gre: add csum offload support for gre headerXin Long1-12/+7
This patch is to add csum offload support for gre header: On the TX path in gre_build_header(), when CHECKSUM_PARTIAL's set for inner proto, it will calculate the csum for outer proto, and inner csum will be offloaded later. Otherwise, CHECKSUM_PARTIAL and csum_start/offset will be set for outer proto, and the outer csum will be offloaded later. On the GSO path in gre_gso_segment(), when CHECKSUM_PARTIAL is not set for inner proto and the hardware supports csum offload, CHECKSUM_PARTIAL and csum_start/offset will be set for outer proto, and outer csum will be offloaded later. Otherwise, it will do csum for outer proto by calling gso_make_checksum(). Note that SCTP has to do the csum by itself for non GSO path in sctp_packet_pack(), as gre_build_header() can't handle the csum with CHECKSUM_PARTIAL set for SCTP CRC csum offload. v1->v2: - remove the SCTP part, as GRE dev doesn't support SCTP CRC CSUM and it will always do checksum for SCTP in sctp_packet_pack() when it's not a GSO packet. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2018-12-10net: Add netif_is_gretap()/netif_is_ip6gretap()Oz Shlomo1-2/+11
Changed the is_gretap_dev and is_ip6gretap_dev logic from structure comparison to string comparison of the rtnl_link_ops kind field. This approach aligns with the current identification methods and function names of vxlan and geneve network devices. Convert mlxsw to use these helpers and use them in downstream mlx5 patch. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-27net: GRE: Add is_gretap_dev, is_ip6gretap_devPetr Machata1-0/+3
Determining whether a device is a GRE device is easily done by inspecting struct net_device.type. However, for the tap variants, the type is just ARPHRD_ETHER. Therefore introduce two predicate functions that use netdev_ops to tell the tap devices. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15gre: set inner_protocol on xmitSimon Horman1-0/+1
Ensure that the inner_protocol is set on transmit so that GSO segmentation, which relies on that field, works correctly. This is achieved by setting the inner_protocol in gre_build_header rather than each caller of that function. It ensures that the inner_protocol is set when gre_fb_xmit() is used to transmit GRE which was not previously the case. I have observed this is not the case when OvS transmits GRE using lwtunnel metadata (which it always does). Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10rps: Inspect PPTP encapsulated by GRE to get flow hashGao Feng1-1/+9
The PPTP is encapsulated by GRE header with that GRE_VERSION bits must contain one. But current GRE RPS needs the GRE_VERSION must be zero. So RPS does not work for PPTP traffic. In my test environment, there are four MIPS cores, and all traffic are passed through by PPTP. As a result, only one core is 100% busy while other three cores are very idle. After this patch, the usage of four cores are balanced well. Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15gre: fix error handlerEric Dumazet1-1/+1
1) gre_parse_header() can be called from gre_err() At this point transport header points to ICMP header, not the inner header. 2) We can not really change transport header as ipgre_err() will later assume transport header still points to ICMP header (using icmp_hdr()) 3) pskb_may_pull() logic in gre_parse_header() really works if we are interested at zone pointed by skb->data 4) As Jiri explained in commit b7f8fe251e46 ("gre: do not pull header in ICMP error processing") we should not pull headers in error handler. So this fix : A) changes gre_parse_header() to use skb->data instead of skb_transport_header() B) Adds a nhs parameter to gre_parse_header() so that we can skip the not pulled IP header from error path. This offset is 0 for normal receive path. C) remove obsolete IPV6 includes Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12gre: Fix wrong tpi->proto in WCCPHaishuang Yan1-1/+1
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04gre: change gre_parse_header to return the header lengthJiri Benc1-1/+1
It's easier for gre_parse_header to return the header length instead of filing it into a parameter. That way, the callers that don't care about the header length can just check whether the returned value is lower than zero. In gre_err, the tunnel header must not be pulled. See commit b7f8fe251e46 ("gre: do not pull header in ICMP error processing") for details. This patch reduces the conflict between the mentioned commit and commit 95f5c64c3c13 ("gre: Move utility functions to common headers"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02gre: Create common functions for transmitTom Herbert1-0/+44
Create common functions for both IPv4 and IPv6 GRE in transmit. These are put into gre.h. Common functions are for: - GRE checksum calculation. Move gre_checksum to gre.h. - Building a GRE header. Move GRE build_header and rename gre_build_header. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02gre: Move utility functions to common headersTom Herbert1-0/+60
Several of the GRE functions defined in net/ipv4/ip_gre.c are usable for IPv6 GRE implementation (that is they are protocol agnostic). These include: - GRE flag handling functions are move to gre.h - GRE build_header is moved to gre.h and renamed gre_build_header - parse_gre_header is moved to gre_demux.c and renamed gre_parse_header - iptunnel_pull_header is taken out of gre_parse_header. This is now done by caller. The header length is returned from gre_parse_header in an int* argument. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10gre: Remove support for sharing GRE protocol hook.Pravin B Shelar1-74/+6
Support for sharing GREPROTO_CISCO port was added so that OVS gre port and kernel GRE devices can co-exist. After flow-based tunneling patches OVS GRE protocol processing is completely moved to ip_gre module. so there is no need for GRE protocol hook. Following patch consolidates GRE protocol related functions into ip_gre module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10openvswitch: Use regular GRE net_device instead of vportPravin B Shelar1-10/+2
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04gre: Call gso_make_checksumTom Herbert1-2/+3
Call gso_make_checksum. This should have the benefit of using a checksum that may have been previously computed for the packet. This also adds NETIF_F_GSO_GRE_CSUM to differentiate devices that offload GRE GSO with and without the GRE checksum offloaed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06gre_offload: statically build GRE offloading supportEric Dumazet1-3/+0
GRO/GSO layers can be enabled on a node, even if said node is only forwarding packets. This patch permits GSO (and upcoming GRO) support for GRE encapsulated packets, even if the host has no GRE tunnel setup. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19ipv4: generalize gre_handle_offloadsEric Dumazet1-1/+7
This patch makes gre_handle_offloads() more generic and rename it to iptunnel_handle_offloads() This will be used to add GSO/TSO support to IPIP tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: gre: move GSO functions to gre_offloadDaniel Borkmann1-0/+4
Similarly to TCP/UDP offloading, move all related GRE functions to gre_offload.c to make things more explicit and similar to the rest of the code. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_handle_offloads() function.Pravin B Shelar1-0/+1
This is required for OVS GRE offloading. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: export gre_build_header() function.Pravin B Shelar1-0/+2
This is required for ovs gre module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19gre: Allow multiple protocol listener for gre protocol.Pravin B Shelar1-0/+24
Currently there is only one user is allowed to register for gre protocol. Following patch adds de-multiplexer. So that multiple modules can listen on gre protocol e.g. kernel gre devices and ovs. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26GRE: Refactor GRE tunneling code.Pravin B Shelar1-0/+51
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)Dmitry Kozlov1-0/+18
PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework NET: introduce the "gre" module for demultiplexing GRE packets on version criteria (required to pptp and ip_gre may coexists) NET: ip_gre: update to use the "gre" module This patch introduces then pptp support to the linux kernel which dramatically speeds up pptp vpn connections and decreases cpu usage in comparison of existing user-space implementation (poptop/pptpclient). There is accel-pptp project (https://sourceforge.net/projects/accel-pptp/) to utilize this module, it contains plugin for pppd to use pptp in client-mode and modified pptpd (poptop) to build high-performance pptp NAS. There was many changes from initial submitted patch, most important are: 1. using rcu instead of read-write locks 2. using static bitmap instead of dynamically allocated 3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages 4. fixed many coding style issues Thanks to Eric Dumazet. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>