summaryrefslogtreecommitdiffstats
path: root/include/linux/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2023-01-09net/mlx5: Fix command stats access after freeMoshe Shemesh1-1/+1
Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: E-Switch, properly handle ingress tagged packets on VSTMoshe Shemesh2-1/+7
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-15Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds1-3/+11
Pull VFIO updates from Alex Williamson: - Replace deprecated git://github.com link in MAINTAINERS (Palmer Dabbelt) - Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing) - Drop unnecessary buffer from ACPI call (Rafael Mendonca) - Correct latent missing include issue in iova-bitmap and fix support for unaligned bitmaps. Follow-up with better fix through refactor (Joao Martins) - Rework ccw mdev driver to split private data from parent structure, better aligning with the mdev lifecycle and allowing us to remove a temporary workaround (Eric Farman) - Add an interface to get an estimated migration data size for a device, allowing userspace to make informed decisions, ex. more accurately predicting VM downtime (Yishai Hadas) - Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas) - Simplify module and Kconfig through consolidating SPAPR/EEH code and config options and folding virqfd module into main vfio module (Jason Gunthorpe) - Fix error path from device_register() across all vfio mdev and sample drivers (Alex Williamson) - Define migration pre-copy interface and implement for vfio/mlx5 devices, allowing portions of the device state to be saved while the device continues operation, towards reducing the stop-copy state size (Jason Gunthorpe, Yishai Hadas, Shay Drory) - Implement pre-copy for hisi_acc devices (Shameer Kolothum) - Fixes to mdpy mdev driver remove path and error path on probe (Shang XiaoJing) - vfio/mlx5 fixes for incorrect return after copy_to_user() fault and incorrect buffer freeing (Dan Carpenter) * tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits) vfio/mlx5: error pointer dereference in error handling vfio/mlx5: fix error code in mlx5vf_precopy_ioctl() samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() hisi_acc_vfio_pci: Enable PRE_COPY flag hisi_acc_vfio_pci: Move the dev compatibility tests for early check hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions hisi_acc_vfio_pci: Add support for precopy IOCTL vfio/mlx5: Enable MIGRATION_PRE_COPY flag vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error vfio/mlx5: Introduce multiple loads vfio/mlx5: Consider temporary end of stream as part of PRE_COPY vfio/mlx5: Introduce vfio precopy ioctl implementation vfio/mlx5: Introduce SW headers for migration states vfio/mlx5: Introduce device transitions of PRE_COPY vfio/mlx5: Refactor to use queue based data chunks vfio/mlx5: Refactor migration file state vfio/mlx5: Refactor MKEY usage vfio/mlx5: Refactor PD usage vfio/mlx5: Enforce a single SAVE command at a time vfio: Extend the device migration protocol with PRE_COPY ...
2022-12-09Merge tag 'ipsec-next-2022-12-09' of ↵Jakub Kicinski1-3/+50
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next 2022-12-09 1) Add xfrm packet offload core API. From Leon Romanovsky. 2) Add xfrm packet offload support for mlx5. From Leon Romanovsky and Raed Salem. 3) Fix a typto in a error message. From Colin Ian King. * tag 'ipsec-next-2022-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: (38 commits) xfrm: Fix spelling mistake "oflload" -> "offload" net/mlx5e: Open mlx5 driver to accept IPsec packet offload net/mlx5e: Handle ESN update events net/mlx5e: Handle hardware IPsec limits events net/mlx5e: Update IPsec soft and hard limits net/mlx5e: Store all XFRM SAs in Xarray net/mlx5e: Provide intermediate pointer to access IPsec struct net/mlx5e: Skip IPsec encryption for TX path without matching policy net/mlx5e: Add statistics for Rx/Tx IPsec offloaded flows net/mlx5e: Improve IPsec flow steering autogroup net/mlx5e: Configure IPsec packet offload flow steering net/mlx5e: Use same coding pattern for Rx and Tx flows net/mlx5e: Add XFRM policy offload logic net/mlx5e: Create IPsec policy offload tables net/mlx5e: Generalize creation of default IPsec miss group and rule net/mlx5e: Group IPsec miss handles into separate struct net/mlx5e: Make clear what IPsec rx_err does net/mlx5e: Flatten the IPsec RX add rule path net/mlx5e: Refactor FTE setup code to be more clear net/mlx5e: Move IPsec flow table creation to separate function ... ==================== Link: https://lore.kernel.org/r/20221209093310.4018731-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-08net/mlx5: fs, add match on ranges APIYevgeny Kliteynik1-0/+12
Range is a new flow destination type which allows matching on a range of values instead of matching on a specific value. Range flow destination has the following fields: - hit_ft: flow table to forward the traffic in case of hit - miss_ft: flow table to forward the traffic in case of miss - field: which packet characteristic to match on - min: minimal value for the selected field - max: maximal value for the selected field Note: - In order to match, the value in the packet should meet the following criteria: min <= value < max - Currently, the only supported field type is L2 packet length Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-08net/mlx5: mlx5_ifc updates for MATCH_DEFINER general objectYevgeny Kliteynik1-2/+66
Update full structure of match definer and add an ID of the SELECT match definer type. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-07net/mlx5: Add generic getters for other functions capsShay Drory1-0/+2
Downstream patch requires to get other function GENERAL2 caps while mlx5_vport_get_other_func_cap() gets only one type of caps (general). Rename it to represent this and introduce a generic implementation of mlx5_vport_get_other_func_cap(). Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07net/mlx5: Introduce IFC bits for migratableYishai Hadas1-1/+5
Introduce IFC related capabilities to enable setting VF to be able to perform live migration. e.g.: to be migratable. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net/mlx5: Introduce ifc bits for pre_copyShay Drory1-3/+11
Introduce ifc related stuff to enable PRE_COPY of VF during migration. Signed-off-by: Shay Drory <shayd@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20221206083438.37807-2-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-12-06net/mlx5: Add HW definitions for IPsec packet offloadLeon Romanovsky1-3/+50
Add all needed bits to support IPsec packet offload mode. Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-29net/mlx5: Use generic definition for UMR KLM alignmentTariq Toukan1-1/+1
MLX5_UMR_KLM_ALIGNMENT is in units of number of entries, while MLX5_UMR_MTT_ALIGNMENT (generalized and renamed to MLX5_UMR_FLEX_ALIGNMENT) is in byte units. This is misleading and confusing. Replace this KLM definition with one based on the generic definition. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-29net/mlx5: Generalize name of UMR alignment definitionTariq Toukan1-2/+2
Per the device spec, MLX5_UMR_MTT_ALIGNMENT is good not only for UMR MTT entries, but for all other entries as well, like KLMs and KSMs. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-29net/mlx5: Remove unused UMR MTT definitionsTariq Toukan1-2/+0
Defines MLX5_UMR_MTT_MASK and MLX5_UMR_MTT_MIN_CHUNK_SIZE are not in use. Remove them. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-29net/mlx5e: Add padding when needed in UMR WQEsTariq Toukan1-0/+1
Per the device spec, MTTs/KLMs list in a UMR WQE must be aligned to 64B. Per our SW design, the MTT/KLMs list would need alignment only if it's too small, for example on PPC when PAGE_SIZE is 64KB, and only 4 pages are needed to cover a MPWQE of size 256KB. Padding, if needed, is taken into account when calculating the UMR WQE fields (ds_cnt and xlt_octowords), however no entries are provided, instead garbage is passed. No real harm though, as these parts act as gaps between the RX MPWQEs and not used by any of them. Hence, in practice, device does not try to write any incoming packet to them. Still, prefer providing clean padding marking the end of the list, and do not map garbage into the RQ memory region. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-29net/mlx5: Remove unused ctx variablesPetr Pavlu1-2/+0
Remove mlx5_priv.ctx_list and ctx_lock which are no longer used after commit 601c10c89cbb ("net/mlx5: Delete custom device management logic"). Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21net/mlx5: cmdif, Print info on any firmware cmd failure to tracepointMoshe Shemesh1-0/+1
While moving to new CMD API (quiet API), some pre-existing flows may call the new API function that in case of error, returns the error instead of printing it as previously done. For such flows we bring back the print but to tracepoint this time for sys admins to have the ability to check for errors especially for commands using the new quiet API. Tracepoint output example: devlink-1333 [001] ..... 822.746922: mlx5_cmd: ACCESS_REG(0x805) op_mod(0x0) failed, status bad resource(0x5), syndrome (0xb06e1f), err(-22) Fixes: f23519e542e5 ("net/mlx5: cmdif, Add new api for command execution") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-12net/mlx5e: Support enhanced CQE compressionOfer Levi1-0/+6
CQE compression feature improves performance by reducing PCI bandwidth bottleneck on CQEs write. Enhanced CQE compression introduced in ConnectX-6 and it aims to reduce CPU utilization of SW side packets decompression by eliminating the need to rewrite ownership bit, which is likely to cost a cache-miss, is replaced by validity byte handled solely by HW. Another advantage of the enhanced feature is that session packets are available to SW as soon as a single CQE slot is filled, instead of waiting for session to close, this improves packet latency from NIC to host. Performance: Following are tested scenarios and reults comparing basic and enahnced CQE compression. setup: IXIA 100GbE connected directly to port 0 and port 1 of ConnectX-6 Dx 100GbE dual port. Case #1 RX only, single flow goes to single queue: IRQ rate reduced by ~ 30%, CPU utilization improved by 2%. Case #2 IP forwarding from port 1 to port 0 single flow goes to single queue: Avg latency improved from 60us to 21us, frame loss improved from 0.5% to 0.0%. Case #3 IP forwarding from port 1 to port 0 Max Throughput IXIA sends 100%, 8192 UDP flows, goes to 24 queues: Enhanced is equal or slightly better than basic. Testing the basic compression feature with this patch shows there is no perfrormance degradation of the basic compression feature. Signed-off-by: Ofer Levi <oferle@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-10-27net/mlx5: Fix possible use-after-free in async command interfaceTariq Toukan1-1/+1
mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-3/+8
Pull rdma updates from Jason Gunthorpe: "Not a big list of changes this cycle, mostly small things. The new MANA rdma driver should come next cycle along with a bunch of work on rxe. Summary: - Small bug fixes in mlx5, efa, rxe, hns, irdma, erdma, siw - rts tracing improvements - Code improvements: strlscpy conversion, unused parameter, spelling mistakes, unused variables, flex arrays - restrack device details report for hns - Simplify struct device initialization in SRP - Eliminate the never-used service_mask support in IB CM - Make rxe not print to the console for some kinds of network packets - Asymetric paths and router support in the CM through netlink messages - DMABUF importer support for mlx5devx umem's" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (84 commits) RDMA/rxe: Remove error/warning messages from packet receiver path RDMA/usnic: fix set-but-not-unused variable 'flags' warning IB/hfi1: Use skb_put_data() instead of skb_put/memcpy pair RDMA/hns: Unified Log Printing Style RDMA/hns: Replacing magic number with macros in apply_func_caps() RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data() RDMA/hns: Remove redundant 'max_srq_desc_sz' in caps RDMA/hns: Remove redundant 'num_mtt_segs' and 'max_extend_sg' RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt() RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table() RDMA/hns: Remove redundant 'bt_level' for hem_list_alloc_item() RDMA/hns: Remove redundant 'attr_mask' in modify_qp_init_to_init() RDMA/hns: Remove unnecessary brackets when getting point RDMA/hns: Remove unnecessary braces for single statement blocks RDMA/hns: Cleanup for a spelling error of Asynchronous IB/rdmavt: Add __init/__exit annotations to module init/exit funcs RDMA/rxe: Remove redundant num_sge fields RDMA/mlx5: Enable ATS support for MRs and umems RDMA/mlx5: Add support for dmabuf to devx umem RDMA/core: Add UVERBS_ATTR_RAW_FD ...
2022-10-06Merge tag 'v6.0' into rdma.git for-nextJason Gunthorpe1-9/+11
Trvial merge conflicts against rdma.git for-rc resolved matching linux-next: drivers/infiniband/hw/hns/hns_roce_hw_v2.c drivers/infiniband/hw/hns/hns_roce_main.c https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-10-03net/mlx5: Start health poll at earlier stage of driver loadMoshe Shemesh1-0/+1
Start health poll at earlier stage, so if fw fatal issue occurred before or during initialization commands such as init_hca or set_hca_cap the poll health can detect and indicate that the driver is already in error state. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: Expose rx_oversize_pkts_buffer counterGal Pressman1-2/+6
Add the rx_oversize_pkts_buffer counter to ethtool statistics. This counter exposes the number of dropped received packets due to length which arrived to RQ and exceed software buffer size allocated by the device for incoming traffic. It might imply that the device MTU is larger than the software buffers size. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Use umr_mode to calculate striding RQ parametersMaxim Mikityanskiy1-0/+4
Instead of passing the unaligned flag, pass an enum that indicates the UMR mode. The next commit will add the third mode (KLM for certain configurations of XSK), which will be added to this enum instead of adding another bool flag everywhere. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30net/mlx5e: xsk: Use KSM for unaligned XSKMaxim Mikityanskiy1-0/+6
UMR MTTs used in striding RQ have certain alignment requirements. While it's guaranteed to work when UMR pages are aligned to the UMR page size, in practice it works then UMR pages are aligned to 8 bytes. However, it's still not enough flexibility for the unaligned mode of XSK. This patch leverages KSM to map UMR pages without alignment requirements, when unaligned XSK is active. The downside is that KSM entries are twice as big as MTTs, which limits the maximum WQE size, so regular RQs and aligned XSK continue using MTTs. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30net/mlx5e: Use runtime page_shift for striding RQMaxim Mikityanskiy1-0/+2
This commit allows striding RQ to determine MTT page size at runtime, instead of sticking to the compile-time PAGE_SIZE. This functionality will be used by a following commit that adjusts the MTT page size to the XSK frame size. Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in data path, it only helps calculate how pages are partitioned into fragments, and PAGE_SIZE will ensure each fragment starts at the beginning of a new allocation unit (XSK frame). Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net/mlx5: Add the log_min_mkey_entity_size capabilityMaxim Mikityanskiy1-1/+7
Add the capability that will allow the driver to determine the minimal MTT page size to be able to map the smallest possible pages in XSK. The older firmwares that don't have this capability default to 12 (i.e. 4096-byte pages). Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch 'mlx5-next' of ↵Jakub Kicinski5-98/+131
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== updates from mlx5-next 2022-09-24 Updates form mlx5-next including[1]: 1) HW definitions and support for NPPS clock settings. 2) various cleanups 3) Enable hash mode by default for all NICs 4) page tracker and advanced virtualization HW definitions for vfio [1] https://lore.kernel.org/netdev/20220907233636.388475-1-saeed@kernel.org/ * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Remove from FPGA IFC file not-needed definitions net/mlx5: Remove unused structs net/mlx5: Remove unused functions net/mlx5: detect and enable bypass port select flow table net/mlx5: Lag, enable hash mode by default for all NICs net/mlx5: Lag, set active ports if support bypass port select flow table RDMA/mlx5: Don't set tx affinity when lag is in hash mode net/mlx5: add IFC bits for bypassing port select flow table net/mlx5: Add support for NPPS with real time mode net/mlx5: Expose NPPS related registers net/mlx5: Query ADV_VIRTUALIZATION capabilities net/mlx5: Introduce ifc bits for page tracker RDMA/mlx5: Move function mlx5_core_query_ib_ppcnt() to mlx5_ib ==================== Link: https://lore.kernel.org/all/20220927201906.234015-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27net/mlx5: Remove from FPGA IFC file not-needed definitionsLeon Romanovsky2-24/+16
Move IP layout bits definitions to be close to the place that actually uses it, together with removal extra defines that not in-use. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: Remove unused structsGal Pressman1-5/+0
Remove structs which are no longer used in the driver: mlx5dr_cmd_qp_create_attr mlx5_fs_dr_ns mlx5_pas Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: Remove unused functionsGal Pressman3-60/+0
Remove functions which are no longer used in the driver: mlx5e_ipsec_is_tx_flow mlx5_health_flush get_cqe_enhanced_num_mini_cqes get_cqe_l3_hdr_type mlx5_health_flush mlx5_fs_is_ipsec_flow _mlx5_fs_is_outer_ipproto_flow mlx5_fs_is_outer_tcp_flow mlx5_fs_is_outer_udp_flow mlx5_fs_is_vxlan_flow mlx5_fs_is_outer_ipsec_flow Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27RDMA/mlx5: Don't set tx affinity when lag is in hash modeLiu, Changcheng1-0/+1
In hash mode, without setting tx affinity explicitly, the port select flow table decides which port is used for the traffic. If port_select_flow_table_bypass capability is supported and tx affinity is set explicitly for QP/TIS, they will be added into the explicit affinity table in FW to check which port is used for the traffic. 1. The overloaded explicit affinity table may affect performance. To avoid this, do not set tx affinity explicitly by default. 2. The packets of the same flow need to be transmitted on the same port. Because the packets of the same flow use different QPs in slow & fast path, it shouldn't set tx affinity explicitly for these QPs. Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: add IFC bits for bypassing port select flow tableLiu, Changcheng1-2/+7
port_select_flow_table_bypass - When set, device supports bypass port select flow table. active_port - Bitmask indicates the current active ports in PORT_SELECT_FT LAG. MLX5_SET_HCA_CAP_OP_MODE_PORT_SELECTION - op_mod to operate PORT_SELECTION_Capabilities. Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: Add support for NPPS with real time modeAya Levin1-0/+2
Add support for setting NPPS. NPPS is currently available in REAL_TIME_CLOCK mode only. In addition allow the user to set the pulse duration. When NPPS pulse duration is not set explicitly by the user, driver set it to 50% of the NPPS period. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: Expose NPPS related registersAya Levin1-4/+14
Add management capability bits indicating firmware may support N pulses per second. Add corresponding fields in MTPPS register. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-09-27net/mlx5: Add IFC bits for mkey ATSJason Gunthorpe1-3/+8
Allows telling a mkey to use PCI ATS for DMA that flows through it. Link: https://lore.kernel.org/r/1-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-09-27Merge branch 'mlx5-vfio' into mlx5-nextLeon Romanovsky5-10/+139
Merge net/mlx5 dependencies for device DMA logging. Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2022-09-22net/mlx5e: Support MACsec offload extended packet number (EPN)Emeel Hakim1-0/+8
MACsec EPN splits the packet number (PN) into two 32-bits fields, epn_lsb (32 least significant bits (LSBs) of PN) and epn_msb (32 most significant bits (MSBs) of PN). Epn_msb bits are managed by SW and for that HW is required to send an object change event of type EPN event notifying the SW to update the epn_msb in addition, once epn_msb is updated SW update HW with the new epn_msb value for HW to perform replay protection. To prevent HW from stopping while handling the event, SW manages another bit for HW called epn_overlap, HW uses the latter to get an indication regarding how to read the epn_msb value correctly while still receiving packets. Add epn event handling that updates the epn_overlap and epn_msb for every 2^31 packets according to the following logic: if epn_lsb crosses 2^31 (half sequence number wraparound) upon HW relevant event, SW updates the esn_overlap value to OLD (value = 1). When the epn_lsb crosses 2^32 (full sequence number wraparound) upon HW relevant event, SW updates the esn_overlap to NEW (value = 0) and increment the esn_msb. When using MACsec EPN a salt and short secure channel id (ssci) needs to be provided by the user, when offloading EPN need to pass this salt and ssci to the HW to be used in the initial vector (IV) calculations. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22net/mlx5: Add ifc bits for MACsec extended packet number (EPN) and replay ↵Emeel Hakim1-0/+29
protection Add ifc bits related to advanced steering operations (ASO) and general object modify for macsec to use as part of offloading EPN and replay protection features. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22net/mlx5: Fix fields name prefix in MACsecEmeel Hakim1-3/+3
Fix ifc fields name to be consistent with the device spec document. Fixes: 8385c51ff5bc ("net/mlx5: Introduce MACsec Connect-X offload hardware bits and structures") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+10
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-9/+10
Pull rdma fixes from Jason Gunthorpe: "Many bug fixes in several drivers: - Fix misuse of the DMA API in rtrs - Several irdma issues: hung task due to SQ flushing, incorrect capability reporting to userspace, improper error handling for MW corners, touching an uninitialized SGL for during invalidation. - hns was using the wrong page size limits for the HW, an incorrect calculation of wqe_shift causing WQE corruption, and mis computed a timer id. - Fix a crash in SRP triggered by blktests - Fix compiler errors by calling virt_to_page() with the proper type in siw - Userspace triggerable deadlock in ODP - mlx5 could use the wrong profile due to some driver loading races, counters were not working in some device configurations, and a crash on error unwind" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/irdma: Report RNR NAK generation in device caps RDMA/irdma: Use s/g array in post send only when its valid RDMA/irdma: Return correct WC error for bind operation failure RDMA/irdma: Return error on MR deregister CQP failure RDMA/irdma: Report the correct max cqes from query device MAINTAINERS: Update maintainers of HiSilicon RoCE RDMA/mlx5: Fix UMR cleanup on error flow of driver init RDMA/mlx5: Set local port to one when accessing counters RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile IB/core: Fix a nested dead lock as part of ODP flow RDMA/siw: Pass a pointer to virt_to_page() RDMA/srp: Set scmnd->result only when scmnd is not NULL RDMA/hns: Remove the num_qpc_timer variable RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift RDMA/hns: Fix supported page size RDMA/cma: Fix arguments order in net device validation RDMA/irdma: Fix drain SQ hang with no completion RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
2022-09-07net/mlx5: Add MACsec Rx tables support to fs_coreLior Nahmanson1-0/+1
Add new namespace for MACsec RX flows. Encrypted MACsec packets should be first decrypted and stripped from MACsec header and then continues with the kernel's steering pipeline. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5e: Add MACsec TX steering rulesLior Nahmanson1-0/+1
Tx flow steering consists of two flow tables (FTs). The first FT (crypto table) has two fixed rules: One default miss rule so non MACsec offloaded packets bypass the MACSec tables, another rule to make sure that MACsec key exchange (MKE) traffic passes unencrypted as expected (matched of ethertype). On each new MACsec offload flow, a new MACsec rule is added. This rule is matched on metadata_reg_a (which contains the id of the flow) and invokes the MACsec offload action on match. The second FT (check table) has two fixed rules: One rule for verifying that the previous offload actions were finished successfully and packet need to be transmitted. Another default rule for dropping packets that were failed in the offload actions. The MACsec FTs should be created on demand when the first MACsec rule is added and destroyed when the last MACsec rule is deleted. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5: Add MACsec Tx tables support to fs_coreLior Nahmanson1-1/+2
Changed EGRESS_KERNEL namespace to EGRESS_IPSEC and add new namespace for MACsec TX. This namespace should be the last namespace for transmitted packets. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5: Introduce MACsec Connect-X offload hardware bits and structuresLior Nahmanson2-2/+101
Add MACsec offload related IFC structs, layouts and enumerations. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5: Generalize Flow Context for new crypto fieldsLior Nahmanson2-7/+12
In order to support MACsec offload (and maybe some other crypto features in the future), generalize flow action parameters / defines to be used by crypto offlaods other than IPsec. The following changes made: ipsec_obj_id field at flow action context was changed to crypto_obj_id, intreduced a new crypto_type field where IPsec is the default zero type for backward compatibility. Action ipsec_decrypt was changed to crypto_decrypt. Action ipsec_encrypt was changed to crypto_encrypt. IPsec offload code was updated accordingly for backward compatibility. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5: Removed esp_id from struct mlx5_flow_actLior Nahmanson1-1/+0
esp_id is no longer in used Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net/mlx5: Query ADV_VIRTUALIZATION capabilitiesYishai Hadas1-0/+9
Query ADV_VIRTUALIZATION capabilities which provide information for advanced virtualization related features. Current capabilities refer to the page tracker object which is used for tracking the pages that are dirtied by the device. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20220905105852.26398-3-yishaih@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07net/mlx5: Introduce ifc bits for page trackerYishai Hadas1-1/+82
Introduce ifc related stuff to enable using page tracker. A page tracker is a dirty page tracking object used by the device to report the tracking log. Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20220905105852.26398-2-yishaih@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-13 20:53:12 +0000